Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coherent spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Count Rate Optimizations for TES Detectors at a Femtosecond X-ray Laser

Transition-edge sensor microcalorimeters have found success as X-ray detectors at synchrotron light-sources, due to a unique combination of high collecting area and good energy resolution. However, the upcoming generation of free-electron lasers (FELs), such as the Linac Coherent Light Source II, is designed to deliver more than 10 10 photons in a 100 fs pulse at a 100 kHz rate, potentially leading to severe pulse-pileup issues. Here we will demonstrate that, for most relevant science cases, it is possible to mitigate pulse pile-up using simple X-ray filters in a way that takes advantage of the substantial increase in X-ray flux at modern FELs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanometer-Scale Acoustic Wave Packets Generated by Stochastic Core-Level Photoionization Events

We demonstrate that the absorption of femtosecond hard x-ray pulses excites quasispherical, high-amplitude, and high-wave-vector coherent acoustic phonon wave packets using an all hard-x-ray pump-probe scattering experiment. The time- and momentum-resolved diffuse scattering signal is consistent with an ensemble of 3D strain wave packets induced by the rapid electron cascade dynamics following photoionization at uncorrelated excitation centers. We quantify key parameters of this process, including the localization size of the stress field and the photon energy conversion efficiency into elastic energy. The parameters are determined by the photoelectron and Auger electron cascade dynamics, as well as the electron-phonon interaction. In particular, we obtain the localization size of the observed strain wave packet to be 1.5 and 2.5 nm for bulk SrTiO 3 and KTaO 3 single crystals, respectively. The results provide crucial information on the mechanism of x-ray energy deposition into matter and shed light on the shortest collective length scales accessible to coherent acoustic phonon generation using x-ray excitation. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

Spatial Mapping of Valence Excited-State Landscapes Using Time-Resolved Shake-Down Spectroscopy

Time-resolved X-ray photoelectron spectroscopy (XPS) is used to track the photodissociation dynamics of 2-iodothiophene following 262 nm excitation. The transient XPS features include both direct ionization of the initially populated excited states and pronounced satellite peaks arising from shake-down processes. While the direct ionization signals exhibit only minimal energy shifts during C−I bond cleavage, the shake-down transitions undergo a substantial, 5 eV, shift over the reaction coordinate. By correlating these shifts with simulated C−I bond lengths, a direct structural mapping is established that reveals the exceptional sensitivity of shake-down channels to molecular geometry. These results demonstrate that shake-down transitions provide a new and powerful probe of ultrafast structural dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structures and pseudogap nature of the strongly correlated Kondo semimetals and insulators CeNiSn and CeRhX(X=As, Sb)

Employing temperature (T)-dependent angle-resolved photoemission spectroscopy (ARPES) near the Ce 4d absorption edge, we have investigated the electronic structures of the strongly correlated Kondo insulators (KIs) and/or Kondo semimetals of CeNiSn and CeRhX (X=As, Sb), which also belong to potential topological KIs (TKIs). Good agreement is found between the Fermi surfaces (FSs) measured at the Ce 4d→4f on resonance and those calculated and unfolded into the Ce-only Brillouin zone, supporting the crucial Ce 4f contribution to the Fermi-edge states in them. While the FSs of CeRhSb and CeNiSn are similar to each other, they are quite different from those of CeRhAs, which is understood to originate from the semimetallic Kondo ground states of CeNiSn and CeRhSb in contrast to the insulating Kondo ground state of CeRhAs. T-dependent ARPES demonstrates the existence of the Kondo resonance above the Fermi level (EF) and its T-driven decoherence in CeNiSn and CeRhSb, and the existence of the Ce 4f Kondo-like peak well below EF with a pseudogap in CeRhAs. With increasing T, the tail of the Kondo resonance in CeNiSn and CeRhSb loses its coherence, whereas the Ce 4f Kondo-like peak in CeRhAs persists up to T≥200 K. The Kondo temperatures (TKs) are estimated via the analysis of T-dependent ARPES, yielding TK≈80 K (CeNiSn), TK≈180 K (CeRhSb), and TK≫200 K (CeRhAs). High-resolution, low-T ARPES confirms the Kondo resonance just above EF in CeNiSn and CeRhSb Kondo semimetals and the KI ground state of CeRhAs with a pseudogap of Δ≈30 meV, demonstrating the importance of the coherent Kondo states in determining their potential topological properties. The differences in the T-dependent ARPES of CeNiSn and CeRhSb suggest the weaker f-c hybridization in CeNiSn than in CeRhSb (c: conduction electron), which is likely due to the more localized Ni 3d orbitals than the delocalized Rh 4d orbitals. The differences between the T-dependent ARPES of CeNiSn/CeRhSb Kondo semimetals and those of CeRhAs Kondo insulator are likely due to the smaller volume of CeRhAs than those of CeNiSn/CeRhSb.

Kang, J-S↗

Optically and thermally driven huge lattice orbital and spin angular momenta from spinning fullerenes

Lattice vibration in solids may carry angular momentum. But unlike the intrinsic spin of electrons, the lattice vibration is rarely rotational. To induce angular momentum, one needs to find a material that can accommodate a twisted normal mode, two orthogonal modes, or excitation of magnons. If excitation is too strong, one may exceed the Lindemann limit, so the material melts. Therefore these methods are not ideal. Here, we theoretically propose a route to phonon angular momentum in a molecular crystal C 60 . We find that a single laser pulse is able to inject a significant amount of angular momentum to C 60 , and the momentum transfer is helicity dependent. Changing from right-circularly polarized light to left-circularly polarized light switches the direction of phonon angular momentum. On the ultrafast timescale, the orbital angular momentum change closely resembles the displacive excitation of coherent phonons, with a cosine-function dependence on time, different from the spin counterpart. Atomic displacements, even under strong laser excitation, remain far below the Lindemann criterion. Under thermal excitation, spinning C 60 even at room temperature generates a huge angular momentum close to several hundred h¯. Our finding opens the door to a large group of fullerenes, from C 60 , C 70 to their endohedral derivatives, where angular momentum can be generated through light or temperature. Furthermore, this paves the way to the phononic control electronic spin and harvesting thermal energy through phonon angular momentum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Autoionizing Polaritons in Attosecond Atomic Ionization

Light-induced states and Autler-Townes splitting of laser-coupled states are common features in the photoionization spectra of laser-dressed atoms. The entangled light-matter character of metastable Autler-Townes multiplets, which makes them autoionizing polaritons, however, is still largely unexplored. We employ attosecond transient-absorption spectroscopy in argon to study the formation of polariton multiplets between the 3s –1 4p and several light-induced states. We measure a controllable stabilization of the polaritons against ionization, in excellent agreement with ab initio theory. Using an extension of the Jaynes-Cummings model to autoionizing states, we show that this stabilization is due to the destructive interference between the Auger decay and the radiative ionization of the polaritonic components. Furthermore, these results give new insights into the optical control of electronic structure in the continuum and unlock the door to applications of radiative stabilization in metastable polyelectronic systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Characterization of Alloy 709 Commercial Heats

The creep-resistant austenitic stainless steel Alloy 709 (Fe-20Cr-25Ni (wt%) based steel) is being investigated as a candidate structural material for the next generation of advanced reactors. Unlike conventional solid solution strengthened austenitic stainless steels, Alloy 709 develops a variety of precipitates during aging at different temperatures and times. In this study, precipitate evolution during short-term aging at 775°C was characterized. The effect of aging time (e.g., 10 vs. 100 hours) and cooling after aging (e.g., water quench vs. air cool) on grain size and precipitates have been investigated using light optical microscopy (OM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). MX (Ni,Tb)(C,N) and M23C6 (Cr,Mo)C precipitates were observed in all the statically-aged samples. The grain size distribution in the sample aged for 10 hours and water quenched (10Q) versus the one aged for 100 hours and air cooled (100A) were comparable. This indicates that grain structure was fairly stable when aging at 775°C for up to 100 hours. In contrast, the sample aged for 10 hours and air cooled (10A) showed the smallest and the most uniform grain size distribution. This phenomenon was observed in only one sample. More studies on duplicate samples are needed to confirm the results obtained. The cooling medium (e.g., water quench vs. air cool) was not observed to impact the size nor the distribution of the MX and M23C6 precipitates. Increasing the aging time resulted in the following: (1) a decrease in dislocations as well as the number density of small precipitates; (2) an increase in the ratio of free precipitates that were not pinning dislocations; (3) relatively higher N, Nb, and Ti concentration in MX precipitate; (4) some increase in length of M23C6 carbides which were located on the coherent boundaries; and (5) the introduction of Sienriched M6X precipitates. The tensile tests at room temperature showed similar properties for each of the static aging treatments, indicating that the differences observed in the microstructural analysis did not have a significant impact on the tensile properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optical coherence and energy-level properties of a Tm 3+ -doped LiNbO 3 waveguide at subKelvin temperatures

We characterize the optical coherence and energy-level properties of the 795-nm 3 H 6 to 3 H 4 transition of Tm 3+ in a Ti 4+ :LiNbO 3 waveguide at temperatures as low as 0.65 K. Coherence properties are measured with varied temperature, magnetic field, optical excitation power and wavelength, and measurement timescale. We also investigate nuclear spin-induced hyperfine structure and population dynamics with varying magnetic field and laser excitation power. Except for accountable differences due to different Ti 4+ - and Tm 3+ -doping concentrations, we find that the properties of Tm 3+ :Ti 4+ :LiNbO 3 produced by indiffusion doping are consistent with those of a bulk-doped Tm 3+ :LiNbO 3 crystal measured under similar conditions. Furthermore, our results, which complement previous work in a narrower parameter space, support using rare-earth ions for integrated optical and quantum signal processing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Frequency comb ptychoscopy

Multiheterodyne techniques using frequency combs—radiation sources whose lines are perfectly evenly-spaced—have revolutionized science. By beating sources with the many lines of a comb, their spectra are recovered. Even so, these approaches are fundamentally limited to probing coherent sources, such as lasers. They are unable to measure most spectra that occur in nature. Here we present frequency comb ptychoscopy, a technique that allows for the spectrum of any complex broadband source to be retrieved using a comb. In this approach, the spectrum is reconstructed by unfolding the simultaneous beating of a source with each comb line. We demonstrate this both theoretically and experimentally, at microwave frequencies. This approach can reconstruct the spectrum of nearly any complex source to high resolution, and the speed, resolution, and generality of this technique will allow chip-scale frequency combs to have an impact in a wide swath of new applications, such as remote sensing and passive spectral imaging.

42 ENGINEERING↗

de Gennes Narrowing and Relationship between Structure and Dynamics in Self-Organized Ion-Beam Nanopatterning

Investigating the relationship between structure and dynamical processes is a central goal in condensed matter physics. Perhaps the most noted relationship between the two is the phenomenon of de Gennes narrowing, in which relaxation times in liquids are proportional to the scattering structure factor. Here, a similar relationship is discovered during the self-organized ion-beam nanopatterning of silicon using coherent x-ray scattering. However, in contrast to the exponential relaxation of fluctuations in classic de Gennes narrowing, the dynamic surface exhibits a wide range of behaviors as a function of the length scale, with a compressed exponential relaxation at lengths corresponding to the dominant structural motif—self-organized nanoscale ripples. These behaviors are reproduced in simulations of a nonlinear model describing the surface evolution. Our team suggests that the compressed exponential behavior observed here is due to the morphological persistence of the self-organized surface ripple patterns which form and evolve during ion-beam nanopatterning.

36 MATERIALS SCIENCE↗

Superconductinglike response in a driven gapped bosonic system

In this study, we propose a mechanism for the photoinduced superconductinglike response recently reported in cuprates and other strongly correlated materials. This mechanism relies on quantum-fluctuating bosons consisting of electron pairs. With periodic drive, the electron pairs and vacancies of pairs form a coherent nonequilibrium condensate, different from conventional superconductors, yet showing a superconductinglike response in some regime even with dissipation. Unlike the case of driven fermionic bands, which results in the familiar Floquet bands with hybridization gaps, for driven bosons the “gap” opens up in the momentum direction, resulting in a resonant region in momentum space where the eigenvalues are complex. We give a simple physical argument for why this picture leads to a “perfect conductor” which exhibits superconductinglike frequency-dependent conductivity but no Meissner response. While our model is quite general, in the case of cuprates, a quantum-fluctuating pair density wave in the pseudogap region may serve as the origin of the quantum-fluctuating electron pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast Relaxation on Qutrit Transitions of Nitrogen-Vacancy Centers in Nanodiamonds

Thanks to their versatility, nitrogen-vacancy (N-𝑉) centers in nanodiamonds have been widely adopted as nanoscale sensors. However, their sensitivities are limited by their short coherence times relative to N-𝑉⁢s in bulk diamond. A more complete understanding of the origins of decoherence in nanodiamonds is critical to improving their performance. Here we present measurements of fast spin relaxation on qutrit transitions between the energy eigenstates composed of the 𝑚 𝑠 =|±1⟩ states of the N-𝑉 − electronic ground state in approximately 40-nm nanodiamonds under ambient conditions. For frequency splittings between these states of 20 MHz or less the maximum theoretically achievable coherence time of the N-𝑉 spin is approximately 2 orders of magnitude shorter than would be expected if the N-𝑉 spin is treated as a qubit. We attribute this fast relaxation to electric field noise. We observe a strong falloff of the qutrit relaxation rate with the splitting between the states, suggesting that, whenever possible, measurements with N-𝑉⁢s in nanodiamonds should be performed at moderate axial magnetic fields (>60 G). We also observe that the qutrit relaxation rate changes with time. As a result, these findings indicate that surface electric field noise is a major source of decoherence for N-𝑉⁢s in nanodiamonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Condensation and Lattice Coupling Drives Stripe Formation in Nickelates

Revealing the predominant driving force behind symmetry breaking in correlated materials is sometimes a formidable task due to the intertwined nature of different degrees of freedom. This is the case for La 2–x Sr x NiO 4+δ , in which coupled incommensurate charge and spin stripes form at low temperatures. Here, we use resonant x-ray photon correlation spectroscopy to study the temporal stability and domain memory of the charge and spin stripes in La 2–x Sr x NiO 4+δ . Although spin stripes are more spatially correlated, charge stripes maintain a better temporal stability against temperature change. More intriguingly, charge order shows robust domain memory with thermal cycling up to 250 K, far above the ordering temperature. Furthermore, these results demonstrate the pinning of charge stripes to the lattice and that charge condensation is the predominant factor in the formation of stripe orders in nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LigninGraphs: lignin structure determination with multiscale graph modeling

Lignin is an aromatic biopolymer found in ubiquitous sources of woody biomass. Designing and optimizing lignin valorization processes requires a fundamental understanding of lignin structures. Experimental characterization techniques, such as 2D-heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra, could elucidate the global properties of the polymer molecules. Computer models could extend the resolution of experiments by representing structures at the molecular and atomistic scales. We introduce a graph-based multiscale modeling framework for lignin structure generation and visualization. The framework employs accelerated rejection-free polymerization and hierarchical Metropolis Monte Carlo optimization algorithms. We obtain structure libraries for various lignin feedstocks based on literature and new experimental NMR data for poplar wood, pinewood, and herbaceous lignin. The framework could guide researchers towards feasible lignin structures, efficient space exploration, and future kinetics modeling. Its software implementation in Python, LigninGraphs, is open-source and available on GitHub.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear spin engineering for quantum information science

Semiconductors are the backbone of modern technology, garnering decades of investment in high-quality materials and devices. Electron spin systems in semiconductors, including atomic defects and quantum dots, have been demonstrated in the last two decades to host quantum coherent spin qubits, often with coherent spin–photon interfaces and proximal nuclear spins. These systems are at the center of developing quantum technology. However, new material challenges arise when considering the isotopic composition of host and qubit systems. The isotopic composition governs the nature and concentration of nuclear spins, which naturally occur in leading host materials. These spins generate magnetic noise—detrimental to qubit coherence—but also show promise as local quantum memories and processors, necessitating careful engineering dependent on the targeted application. Reviewing recent experimental and theoretical progress toward understanding local nuclear spin environments in semiconductors, we show this aspect of material engineering as critical to quantum information technology.

Defects↗

Non-Hermitian approach for quantum plasmonics

Herein, we examine the limits of applicability of a simple non-Hermitian model for exciton/plasmon interactions in the presence of dissipation and dephasing. The model can be used as an alternative to the more complete Lindblad density matrix approach and is computationally and conceptually simpler. We find that optical spectra in the linear regime can be adequately described by this approach. The model can fail, however, under continuous optical driving in some circumstances. In the case of two quantum dots or excitons interacting with a plasmon, the model can also describe coherences and entanglement qualitatively when both dissipation and dephasing are present and quantitatively in the limit with no dephasing. The approach, within a single excitation manifold, is also applied to assess the role of disorder for 50 quantum dots interacting with a plasmon, where we find that, on average, large enough disorder can help stabilize the ensemble average of the open quantum system toward a dark quasi-steady-state much faster than without disorder. Furthermore, while such single excitation manifold calculations in this size limit can readily be done with either the non-Hermitian or Lindblad forms, as one goes to larger Hilbert space sizes, the computational and storage advantages of the non-Hermitian approach can become more useful. Published under license by AIP Publishing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗