Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CORRELATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Correlation of ERTS MSS data and earth coordinate systems

The author has identified the following significant results. Experience has revealed a problem in the analysis and interpretation of ERTS-1 multispectral scanner (MSS) data. The problem is one of accurately correlating ERTS-1 MSS pixels with analysis areas specified on aerial photographs or topographic maps for training recognition computers and/or evaluating recognition results. It is difficult for an analyst to accurately identify which ERTS-1 pixels on a digital image display belong to specific areas and test plots, especially when they are small. A computer-aided procedure to correlate coordinates from topographic maps and/or aerial photographs with ERTS-1 data coordinates has been developed. In the procedure, a map transformation from earth coordinates to ERTS-1 scan line and point numbers is calculated using selected ground control points nad the method of least squares. The map transformation is then applied to the earth coordinates of selected areas to obtain the corresponding ERTS-1 point and line numbers. An optional provision allows moving the boundaries of the plots inward by variable distances so the selected pixels will not overlap adjacent features.

Malila, W. A.↗

Correlation of full-scale drag predictions with flight measurements on the C-141A aircraft : Phase 2: Wind tunnel tests, analysis, and prediction techniques. Volume 2: Wind tunnel test and basic data

A research program has been conducted to determine the degree of cruise drag correlation on the C-141A aircraft between predictions based on wind tunnel test data, and flight test results. Information is presented on the wind tunnel test program and basic aerodynamic data on the C-141A wind-tunnel model used in the correlation studies.

Macwilkinson, D. G.↗

A correlation between colors of Jovian clouds and their 5 micron temperatures

Observations of Jupiter at 5 micron by Keay, Low, and Rieke were compared with color photographs by Minton and Kutoroff taken near the same epoch. A strong correlation is evident between the 5 micron temperature distribution on the Jupiter disk and the cloud colors. Further comparison is made with photographs in the .888 micron CH4 absorption band. Strong correlations exist for features in System 2 latitudes at all three wavelengths but not for those that move with System 1. This is attributed to more intensive convection in the Equatorial Zone. Owen's suggestion that colors may result from at least two mechanisms appears valid; a third appears responsible for blue features only.

Minton, R. B.↗

Data correlation and analysis of arc tunnel and wind tunnel tests of RSI joints and gaps. Volume 1: Technical report

Heat transfer data measured in gaps typical of those under consideration for joints in space shuttle reusable surface insulation protection systems have been assimilated, analyzed and correlated. The data were obtained in four NASA facilities. Several types of gaps were investigated with emphasis on simple butt joints. Gap widths ranged from 0.07 to 0.7 cm and depths ranged from 1 to 6 cm. Laminar, transitional and turbulent boundary layer flows over the gap opening were investigated. Three-dimensional heating variations were observed within gaps in the absence of external flow pressure gradients. Heat transfer correlation equations were obtained for several of the tests. Thermal protection system performance with and without gaps was compared for a representative shuttle entry trajectory.

Christensen, H. E.↗

Correlation of hippocampal theta rhythm with changes in cutaneous temperature

A possible role for the hippocampus in alerting an animal to changes in cutaneous temperature was examined. Following local warming or cooling of the ears of unanesthetized, loosely restrained rabbits, theta waves (4-7 Hz EEG waves) were recorded from electrodes straddling the hippocampus. The onset of the hippocampal theta rhythm was correlated with changes in cutaneous temperature, an observation consistent with studies indicating that the theta rhythm is a nonspecific response evoked by stimulation of several sensory modalities. Additional data from cats and rabbits were correlated with specific neurons within the hippocampus, namely pyramidal cells. Post stimulus time histograms obtained by excitation of the dorsal fornix were interpreted in terms of excitatory and inhibitory inputs to pyramidal cells. Thus, the theta rhythm, which appears to be evoked by changes in cutaneous temperature, can be related to a specific type of hippocampal neuron which is in turn connected with other areas of the brain involved in temperature regulation.

Horowitz, J. M.↗

Dynamic stall modeling and correlation with experimental data on airfoils and rotors

Two methods for modeling dynamic stall have been developed. The alpha, A, B method generates lift and pitching moments as functions of angle of attack and its first two time derivatives. The coefficients are derived from experimental data for oscillating airfoils. The Time Delay Method generates the coefficients from steady state airfoil characteristics and an associated time delay in stall beyond the steady state stall angle. Correlation with three types of test data shows that the alpha, A, B method is somewhat better for use in predicting helicopter rotor response in forward flight. Correlation with lift and moment hysteresis loops generated for oscillating airfoils was good for both models.

Carlson, R. G.↗

Correlation of finite-element structural dynamic analysis with measured free vibration characteristics for a full-scale helicopter fuselage

The correlation achieved with each program provides the material for a discussion of modeling techniques developed for general application to finite-element dynamic analyses of helicopter airframes. Included are the selection of static and dynamic degrees of freedom, cockpit structural modeling, and the extent of flexible-frame modeling in the transmission support region and in the vicinity of large cut-outs. The sensitivity of predicted results to these modeling assumptions are discussed. Both the Sikorsky Finite-Element Airframe Vibration analysis Program (FRAN/Vibration Analysis) and the NASA Structural Analysis Program (NASTRAN) have been correlated with data taken in full-scale vibration tests of a modified CH-53A helicopter.

Kenigsberg, I. J.↗

A new correlation among high-velocity clouds in the galaxy

Search for correlations among the various parameters associated with the hydrogen gas in high-velocity clouds in the galaxy. The results obtained indicate that there may be some general trends, but in most cases it is difficult to assess the significance of the correlation because of the large amount of scatter. In one case, however, there appears to be a significant relationship that leads to an estimate of the distance to the high-velocity gas of about 600 pc.

Silk, J.↗

Correlation of ERTS MSS data and earth coordinate systems

Experience has revealed a problem in the analysis and interpretation of ERTS multispectral scanner (MSS) data. The problem is one of accurately correlating ERTS MSS pixels (picture elements) with analysis areas specified on aerial photographs or topographic maps for training recognition computers and/or evaluating recognition results. A computer-aided procedure to correlate coordinates from topographic maps and/or aerial photographs with ERTS data coordinates has been developed. In the procedure, a map transformation from earth coordinates to ERTS scan line and point numbers is calculated using selected ground control points and the method of least squares. The map transformation is then applied to the earth coordinates of selected areas to obtain the corresponding ERTS point and line numbers.

Malila, W. A.↗

Transmissometry and suspended matter in lower Chesapeake Bay - Correlation with ERTS multispectral imagery

The use of multispectral imagery from the Earth Resources Technology Satellite to quantitatively monitor turbidity and suspended matter of estuarine waters is being evaluated in this study. Synoptic measurements of surface-water characteristics are being made on three baselines in lower Chesapeake Bay in synchrony with satellite overpasses. Turbidity is measured as transmittance by a continuously recording transmissometer, and suspended matter is collected by filtration. Preliminary correlations to ERTS multispectral imagery have been made by microdensitometry. Final correlations will be made from the bulk tape format.

Bowker, D. E.↗

Families of shift-register sequences with impulsive correlation properties

A study of the linear feedback shift registers corresponding to a subset of nonprimitive irreducible polynomials over GF(2) has uncovered a class of sequences with interesting structures and cyclic correlation properties. These families of sequences are made up of interleaved identical sequences which are from primitive irreducible polynomials. Furthermore, they have correlation functions which are two or three valued, being constant at zero or a small value throughout most of their length with the exception of a small number of impulses. Each interval between such impulses on the correlograms uniquely corresponds to (and thus uniquely identifies) the member sequence or sequences producing it. It is shown that these families of sequences have direct application as error-correcting codes.

Lee, J.-J.↗

The remote measurement of trace atmospheric species by correlation interferometry. I - Carbon monoxide and methane

A correlation interferometer has been developed for the measurement of carbon monoxide and methane at 2.35 micrometers in the troposphere and in the stratosphere. This instrument has been tested in laboratory tests, solar-looking outdoor tests, and downward-looking airplane-based tests. The aircraft tests were flown on a Falcon fanjet provided by The Canada Centre for Remote Sensing over both polluted and unpolluted regions of North America. The results of these various tests are discussed. Based on the results obtained for carbon monoxide and methane, a study was undertaken to investigate the feasibility of measuring other atmospheric trace species by correlation interferometry. Results of the feasibility study for carbon dioxide, water vapor, ammonia, nitrous oxide, nitric oxide, nitrogen dioxide, sulfur dioxide, and several hydrocarbons are presented.

Goldstein, H. W.↗

Correlation analysis of X-ray emission from Cygnus X-1

Normalized autocorrelation and cross-correlation coefficients have been calculated for the X-ray emission of Cygnus X-1 in two energy bins, 2.1-5.1 keV and 5.1-12 keV. The analysis shows a strong correlation between the pulsations in the two energy bins, with the low-energy pulsations lagging behind the high-energy ones, or alternatively a shorter duration of the pulse trains in the high-energy bin. The power spectral density derived from the autocorrelation functions indicates a larger contribution of the high-frequency components for the higher-energy X-rays.

Brinkman, A. C.↗

A correlation study of finite-element modeling for vibrations of composite material panels

A correlation study has been made to evaluate the effectiveness of finite-element modeling for vibrations of composite material panels. The three types of composite material panels studied were: (1) symmetrically laminated cross-ply panels, (2) unsymmetrically laminated cross-ply panels, and (3) a 1/6-scale sandwich wing model. Correlations of finite-element predictions for frequencies and vibration modes were made with Rayleigh-Ritz analyses and experimental data. For the symmetrically laminated panels, the finite-element representation predicted vibration modes very accurately. For the unsymmetrically laminated panels it was found that predictions using uncoupled finite-element plate bending elements did not give good agreement with experimental data. The constant-chord, swept-wing model was effectively analyzed by finite-element presentations using either sandwich elements or ribs and spars.

Thornton, E. A.↗

Cross-correlation methods for studying near- and far-field noise characteristics of several flow-surface interaction problems

Systematic methods based on cross-correlation techniques are presented for experimental studies of near- and far-field noise characteristics of airflow-surface interaction problems. By cross-correlating any two of three-kinds of microphone measurements: one flush-mounted on the surface, one located in the near field, and one placed in the far field, far-field noise intensities and near-field acoustic energy fluxes can be determined. In both near and far fields, the noise characteristics due to the flow turbulence and surface fluctuating pressure contributions can be evaluated separately. Specific applications to the noise field generated by impinging jets, by surface blowing jets, and by turbulent flow over trailing edges are discussed.

Pan, Y. S.↗

Geographic correlation of television pictures obtained from weather satellites

The geographical control of satellite pictures, using the terminology of aerial photography, can be treated as the problem of analysis of a single picture with the objective of obtaining a ground contour map. Studies have shown the possibility and capability of the method of composing photographic maps from transformed television pictures. Optico-mechanical transformation solves the problem of geographical correlation for operational purposes. However, this technique does not compensate for electronic distortion, and accounts for earth sphericity only approximately. However, for certain purposes (studying ice drift), the maximum possible accuracy is required. Analytic geographical correlation methods using digital computers should be considered promising.

Bushuyev, A. V.↗

A model for jet-noise analysis using pressure-gradient correlations on an imaginary cone

The technique for determining the near and far acoustic field of a jet through measurements of pressure-gradient correlations on an imaginary conical surface surrounding the jet is discussed. The necessary analytical developments are presented, and their feasibility is checked by using a point source as the sound generator. The distribution of the apparent sources on the cone, equivalent to the point source, is determined in terms of the pressure-gradient correlations.

Norum, T. D.↗

Measurements of V/STOL aircraft noise mechanisms using pressure cross-correlation techniques in a reverberant wind tunnel

A 3.8 cm. model jet was operated in a wind tunnel with cross-flow in order to determine the effect on jet noise radiated characteristics. A method was developed for the determination of noise radiating characteristics of sources within reverberant wind tunnels; cross-correlation measurements were used. The averaging time in the cross-correlation is determined by the amount of background noise within the wind tunnel. It was found that cross-flow increases the radiated noise by 10 db. There was some indication of downstream radiation exceeding the sideline radiation.

Meecham, W. C.↗