Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONDENSATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Waste Treatment and Immobilization Plant U. S. Department of Energy Office of River Protection Submerged Bed Scrubber Condensate Disposition Project - 13460

The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix [1]. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility [2]. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, which mitigates potential issues associated with recycling. This study [2] concluded that SBS direct disposal is a viable option to the WTP baseline. The results show: - Off-site transportation and disposal of the SBS condensate is achievable and cost effective. - Reduction of approximately 4,325 vitrified WTP Low Activity Waste canisters could be realized. - Positive WTP operational impacts; minimal WTP construction impacts are realized. - Reduction of mass flow from the LAW Facility to the Pretreatment Facility by 66%. - Improved Double Shell Tank (DST) space management is a benefit. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A New Empirical Correlation for Condensation Heat Transfer Coefficient of Air-Steam Mixture on a Vertical Tube

The Passive Containment Cooling System (PCCS) provides passive means to remove the decay heat and protect the integrity of the containment during severe accidents. For thermal design and performance evaluation of the PCCS condensers, one needs experimental data and a heat transfer model for condensation heat transfer in the presence of a noncondensable gas on a vertical tube. The main objective of this study is to propose a new empirical correlation, based on the experimental data obtained in Jeju National University, expressed in terms of dimensionless numbers. Dimensionless numbers to account for vapor-gas condensation phenomena are found by non-dimensionalizing the governing boundary layer equations, and the predictions of the proposed correlation is validated with selected sets of experimental data. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Enhancing Synchronous Condenser Operation of Hydrogenerators

Hydropower plants are sometimes dispatched below capacity or even shut down to meet water regulations. These can temporarily be repurposed to operate as synchronous condensers. To enable this capability, this paper proposes a design that allows hydrogenerators to safely operate as synchronous condensers, providing fast voltage and reactive power support under both normal and boost conditions. The proposed design integrates capability curves with hydrogenerators’ excitation systems through modifications using proposed MVA-field current curve, current controller, and limiter. The design is implemented locally at the machine for rapid response. Simulation results demonstrate the effectiveness of the proposed design and using hydrogenerators as synchronous condensers in power grids.

24 - POWER TRANSMISSION AND DISTRIBUTION↗

Probing the excitation spectrum of polariton condensates

We propose a four-wave mixing experiment to probe the elementary excitation spectrum of a nonequilibrium Bose-Einstein condensate of exciton-polaritons under nonresonant pumping. Analytical calculations based on mean-field theory show that this method is able to reveal the characteristic negative energy feature of the Bogoliubov dispersion. Numerical simulations including the finite spatial profile of the excitation laser spot and a weak disorder confirm the practical utility of the method for realistic condensates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-consistent perturbation expansion for Bose-Einstein condensates satisfying Goldstone's theorem and conservation laws

Quantum-field-theoretic descriptions of interacting condensed bosons have suffered from the lack of self-consistent approximation schemes satisfying Goldstone's theorem and dynamical conservation laws simultaneously. We present a procedure to construct such approximations systematically by using either an exact relation for the interaction energy or the Hugenholtz-Pines relation to express the thermodynamic potential in a Luttinger-Ward form. Inspection of the self-consistent perturbation expansion up to the third order with respect to the interaction shows that the two relations yield a unique identical result at each order, reproducing the conserving-gapless mean-field theory [T. Kita, J. Phys. Soc. Jpn. 74, 1891 (2005)] as the lowest-order approximation. The uniqueness implies that the series becomes exact when infinite terms are retained. We also derive useful expressions for the entropy and superfluid density in terms of Green's function and a set of real-time dynamical equations to describe thermalization of the condensate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum Kelvin-Helmholtz instability in phase-separated two-component Bose-Einstein condensates

We theoretically study the Kelvin-Helmholtz instability in phase-separated two-component Bose-Einstein condensates using the Gross-Pitaevskii and Bogoliubov-de Gennes models. A flat interface between the two condensates is shown to deform into sawtooth or Stokes-type waves, leading to the formation of singly quantized vortices on the peaks and troughs of the waves. This scenario of interface instability in quantum fluids is quite different from that in classical fluids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum condensates in nuclear matter

Nonrelativistic nuclear matter is considered as a special example of a many-particle system. Quantum statistical methods are applied to treat the formation and dissolution of bound states in dense matter. The formation of quantum condensates is investigated. Special aspects are the transition from Bose-Einstein condensation (BEC) to Bardeen-Cooper-Schrieffer (BCS) pairing as well as the occurrence of quartetting. Consequences for the structure of nuclei are compared with experimental data. Exercises to illustrate the main features of in-medium effects in nuclear matter are given.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emission of Cu{sub 2}O Paraexcitons Confined by a Strain Trap: Hints of a Bose–Einstein Condensate?

We monitor the phonon sideband emission from paraexcitons confined in a strain trap in cuprous oxide at T = 1.25 K. On the low energy ank of the optical phonon replicas, both of Γ{sub 5}{sup −} and Γ{sub 3}{sup −} symmetry (the latter activated by application of a magnetic field), we detect sharp peaks that might represent indications for a paraexciton Bose–Einstein condensate. In contrast, such peaks are absent in the phonon-mediated emission of the orthoexcitons, and they also disappear at elevated temperatures. The results challenge our understanding of the involved physics, e.g., of the Auger recombination of excitons, which has so far been believed to prevent crossing the border to a condensate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Winding up superfluid in a torus via Bose Einstein condensation

We simulate Bose-Einstein condensation at finite temperature in a ring employing stochastic Gross-Pitaevskii equation and show that cooling through the critical point can generate topologically stable quantized circulation of the newborn condensate around the ring. The resulting winding numbers exhibiting Gaussian distribution with dispersion following scaling behavior predicted by the Kibble-Zurek mechanism (KZM). This opens up possibilities for direct experimental study of the underlying phase transition and the basic principles of KZM extended to account for such circulations. We discuss the effect of inhomogeneity on the above phenomenon by considering the effect of tilting of the ring in the gravitational field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bose-Einstein condensation in liquid 4He under pressure

We present neutron scattering measurements of Bose-Einstein condensation, the atomic momen- tum distribution and Final State effects in liquid 4He under pressure. The condensate fraction at low temperature is found to decrease from n0 = 7.25 0.75% at SVP (p 0) to n0 = 3.2 0.75% at pressure p = 24 bar. This indicates an n0 = 3.0% in the liquid at the liquid/solid co-existence line (p = 25.3 bar). The atomic momentum distribution n(k) has high occupation of low k states and differs significantly from a Gaussian (e.g. a classical n(k)). Both n(k) and the Final state function broaden with increasing pressure, reflecting the increased localization of the 4He in space under increased pressure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Abstract Vapor‐phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

Kwon, Ohsung↗

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Vapor-phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady-state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Branched Bio-Lubricant Base Oil Production through Aldol Condensation

Currently, lubricant base oils are derived from petroleum, a nonrenewable feedstock that contributes to greenhouse gas emissions. Bioderived, renewable lubricant base oils can mitigate environmental challenges and offer superior cold flow properties by incorporating branches to the base oil's hydrocarbon backbone with an appropriate synthetic strategy. A strategy was developed to synthesize branched alkanes for lubricant base oil in two steps from 12-tricosanone, obtained from bioderived fatty acids, and furfural, obtained from lignocellulosic biomass. The reaction pathway involves carbon–carbon coupling through aldol condensation followed by hydrodeoxygenation (HDO). Various solvents (non-polar, aprotic and polar, protic) and reaction conditions were screened to achieve a maximum yield of 94.3% of aldol condensation products, containing the majority of a C 33 furan (79.5%) followed by a C 28 furan (14.8%). Subsequent HDO of aldol condensation products over an Ir-ReO x /SiO 2 catalyst produced lubricant-ranged branched alkanes (C 28 and C 33 ) with 61.4% yield and small fractions (<11%) of alkanes with carbon numbers between C 15 and C 10 . The viscous properties of the produced bio-lubricant base oil were comparable to commercial petroleum-derived Group III and Group IV base oils. Overall, this approach serves as a potential stepping-stone to replace petroleumderived base oils and, in turn, reduce greenhouse gas emissions associated with current lubricant production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

eQE: An open‐source density functional embedding theory code for the condensed phase

Abstract In this work, we present the main features and algorithmic details of a novel implementation of the frozen density embedding (FDE) formulation of subsystem density functional theory (DFT) that is specifically designed to enable ab initio molecular dynamics (AIMD) simulations of large‐scale condensed‐phase systems containing 1000s of atoms. This code (available at http://eqe.rutgers.edu ) has been given the moniker of embedded Quantum ESPRESSO (eQE) as it is a generalization of the open‐source Quantum ESPRESSO (QE) suite of programs. The strengths of eQE reside in a hierarchical parallelization scheme that allows for an efficient and fully self‐consistent treatment of the electronic structure (via the addition of an additional DIIS extrapolation layer) while simultaneously exploiting the inherent symmetries and periodicities in the system (via sampling of subsystem‐specific first Brillouin zones and utilization of subsystem‐specific basis sets). While bulk liquids and molecular crystals are two classes of systems that exemplify the utility of the FDE approach (as these systems can be partitioned into weakly interacting subunits), we show that eQE has significantly extended this regime of applicability by outperforming standard semilocal Kohn–Sham DFT (KS‐DFT) for large‐scale heterogeneous catalysts with quite different layer‐specific electronic structure and intrinsic periodicities. eQE features very favorable strong parallel scaling for a model system of bulk liquid water composed of 256 water molecules, which allows for a significant decrease in the overall time to solution when compared to KS‐DFT. We show that eQE achieves speedups greater than one order of magnitude ( ) when performing AIMD simulations of such large‐scale condensed‐phase systems as: (1) molecular liquids via bulk liquid water represented by 1024 independent water molecules (3072 atoms with a 25.3× speedup over KS‐DFT), (2) polypeptide/biomolecule solvation via ( gly ) 6 solvated in (H 2 O) 395 (1230 atoms with a 38.6× speedup over KS‐DFT), and (3) molecular crystals via a 3 × 3 × 3 periodic supercell of pentacene (1940 atoms with a 12.0× speedup over KS‐DFT). These results represent a significant improvement over the current state‐of‐the‐art and now enable subsystem DFT‐based AIMD simulations of realistically sized condensed‐phase systems of interest throughout chemistry, physics, and materials science.

Genova, Alessandro↗

Fermion masses through four-fermion condensates

Fermion masses can be generated through four-fermion condensates when symmetries prevent fermion bilinear condensates from forming. This less explored mechanism of fermion mass generation is responsible for making four reduced staggered lattice fermions massive at strong couplings in a lattice model with a local four-fermion coupling. The model has a massless fermion phase at weak couplings and a massive fermion phase at strong couplings. In particular there is no spontaneous symmetry breaking of any lattice symmetries in both these phases. Recently it was discovered that in three space-time dimensions there is a direct second order phase transition between the two phases. Here we study the same model in four space-time dimensions and find results consistent with the existence of a narrow intermediate phase with fermion bilinear condensates, that separates the two asymptotic phases by continuous phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Topological fermion condensates from anomalies

We show that a class of fermion theory formulated on a compact, curved manifold will generate a condensate whose magnitude is determined only by the volume and Euler characteristic of the space. The construction requires that the fermions be treated as Kahler-Dirac fields and the condensate arises from an anomaly associated with a U(1) global symmetry which is subsequently broken to a discrete subgroup. Remarkably the anomaly survives under discretization of the space which allows us to compute the condensate on an arbitrary triangulation. The results, being topological in character, should hold in a wide range of gravitationally coupled fermion theories both classical and quantum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗

Enhanced internal condensation of R1233zd(E) on micro- and nanostructured copper and aluminum surfaces

In-tube condensation of refrigerants is an important process which affects thermal efficiency in many applications, ranging from refrigeration and air conditioning to electronics thermal management. In-tube heat transfer and pressure drop are important to heat exchanger sizing and design. Here, in this work, micro- and nanostructured surfaces are applied to the internal wetted areas of copper and aluminum mini-channels to enhance the condensation heat transfer coefficient of hydrofluorocarbon R1233zd(E) refrigerant. To achieve scalable nanomanufacturing, surfaces were uniformly structured by relying on hydrochloric acid etching of aluminum and chemical oxidation of copper. The etched aluminum surfaces exhibited a 150% increase in heat transfer coefficient compared to smooth aluminum channels at specific qualities, with a 66% heat transfer coefficient improvement for complete phase change from saturated vapor to saturated liquid. Copper oxide structures showed no discernable difference in thermal-hydraulic performance when compared to smooth copper channels. Critical dimensionless parameters governing the heat transfer enhancement were identified by varying the tube internal diameter (2.3 mm to 4.7 mm), refrigerant mass flux (50 to 300 kg/(m 2 ·s)), and refrigerant quality (0 to 1). The dimensionless parameters include the Bond number normalized to the condensate film thickness, and the Weber number modified by the vapor friction factor. The relatively small increase in pressure drop (< 10%) associated with these surface enhancements further supports the promise of this method. The scalable and cost-effective techniques used to create these aluminum microstructures may reduce manufacturing cost when compared with current enhancement approaches such as extrusion, drawing, and welding.

42 ENGINEERING↗