SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The extensive air shower (EAS) development model independent method of the determination of a maximum depth of shower (X sub m) is considered. X sub m values obtained on various EAS parameters are in a good agreement.
Three 10 sq m liquid scintillators were situated at approximately 0 m, 150 m and 250 m from the center of the Haverah Park array. The detectors were shielded by lead/barytes giving muon detection thresholds of 317 MeV, 431 MeV and 488 MeV respectively. During part of the operational period the 431 MeV threshold was lowered to 313 MeV for comparison purposes. For risetime measurement fast phototubes were used and the 10% to 70% amplitude time interval was parameterized by T sub 70. A muon lateral density distribution of the form rho mu (R theta) = krho(500)0.94 1/R(1 + R/490)-eta has been fitted to the data for 120 m R 600 m and 0.27 (500) 2.55. The shower size parameter (500) is the water Cerenkov response at 500 m from the core of the extensive air showers (EAS) and is relatable to the primary energy. The results show general consistency.
Experiments were conducted to determine the mean turbulence characteristics of the noise-producing region of a 3 in. cold excited round jet. The jet was excited by plane acoustic waves with a high amplitude of excitation (2 percent of the jet dynamic head), and at a Strouhal number of 0.5. The flow Reynolds number was 280,000. The exit boundary layer was made turbulent by artificially tripping it with sandpaper strips. The data were obtained with single and X-hot-wires and processed in digital form. Mean and higher order statistics were also deduced. The results showed an increase in all three velocity components and stresses. However, most of the increase was noticed from the longitudinal component, while the changes in the radial velocity and the azimuthal component were much smaller. Substantial widening of the jet occurred, accompanied by a shortening of the potential core. Increased rates of production of energy close to the lip-line were a characteristic feature of the mixing region behavior.
Experiments were run to characterize the global vorticity distribution in an excited plane mixing layer. A reciprocating piston excited the mixing layer at a 0.0053 intensity, a Strouhal number of 0.97, and a 15 Hz frequency. An X-wire anemometer and a pitot tube furnished data in the 13 m/sec free stream velocity flow. Deep depressions were observed in the velocity contours on the high-speed side of the mixing layer, while primary vortex growth occurred on the low-speed side. The cores of the vortices moved at highly differentiated velocities. Phase plots were also generated to show tearing and fusing of the vortex contours.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The calculations of the vertically-integrated strengths of the lithosphere and the Agrand number are described. The crustal and mantle contributions to the vertically-integrated strength, which is approximated from the brittle layer, and the depth and stress difference at the brittle-ductile transtion, is examined. The effective power laws for vertically-integrated rheology, which are dependent on the thermal stability of the lithosphere and the depth to the brittle-ductile transition in the crust, are studied. The relationship between the Agrand number and vertically-integrated strengths of the lithosphere and the thermal regime of the uppermost mantle and the stress state in the upper crust is analyzed.
The MacCormack implicit predictor-corrector model (1981) for numerical solution of the coupled Navier-Stokes equations for turbulent flows is extended to nonconservative multiequation turbulence models, as well as the inclusion of second-order Reynolds stress turbulence closure. A scalar effective pressure turbulent contribution to the pressure field is defined to approximate the effects of the Reynolds stress in strongly sheared flows. The Jacobian matrices of the transport equations are diagonalized to reduce the required computer memory and run time. Techniques are defined for including turbulence in the diagonalization. Application of the method is demonstrated with solutions generated for transonic nozzle flow and for the interaction between a supersonic flat plate boundary layer and a 12 deg compression-expansion ramp.
It is proposed to measure the decreasing global concentration of an OH reactive isotopic tracer, G sub 2 D sub 6, after its introduction into the troposphere in a manner to facilitate uniform global mixing. Analyses at the level of 2 x 10 to the -19th power fraction, corresponding to one kg uniformly distributed globally, should be possible by a combination of cryogenic absorption techniques to separate ethane from air and high sensitivity isotopic analysis of ethane by mass spectrometry. Aliquots of C sub 2 D sub 6 totaling one kg would be introduced to numerous southern and northern latitudes over a 10 day period in order to achieve a uniform global concentration within 3 to 6 months by the normal atmospheric circulation. Then samples of air of 1000 l (STP) would be collected periodically at a tropical and temperate zone location in each hemisphere and spiked with a known amount of another isotopic species of ethane, C-13 sub 2 H sub 6, at the level of 10 to the -11th power mole fraction. After separation of the ethanes from air, the absolute concentration of C sub 2 D sub 6 would be analyzed using the Argonne 100-inch radius mass spectrometer.
The Nimbus-7 ERB experiment measures the Earth's albedo from a satellite in a fixed Sun synchronous orbit. The data is obtained at a fixed time of the day for each latitude observed. For Earth Radiation Budget studies it is normally assumed that the observed scene is invariant during the day and that the albedo varies only with the solar zenith angle. This paper presents a technique for computing mean zonal albedos as a function of the albedo (A sub s) of cloud free atmosphere, the albedo (A sub c) of cloudy atmosphere and of the cloud fractions. The values of A sub s and A sub c are obtained from radiation transfer theory and climatological values of the surface and cloud albedos. The albedos are a function of the solar zenith angle, latitude and solar declination. The cloud fractions are measured from the Nimbus-7 ERB albedos. The present study shows the importance of taking into account latitude variations in surface types and in cloud cover.
Explore the source record for details and available documents.
Chapman chemistry has been used in a two-dimensional model to simulate ozone balance phenomenology. The similarity between regions of ozone production and loss calculated using Chapman chemistry and those computed using LIMS and SAMS data with a photochemical equilibrium model indicate that such simplified chemistry is useful in studying gross features in stratospheric ozone balance. Net ozone production or loss rates are brought about by departures from the photochemical equilibrium (PCE) condition. If transport drives ozone above its PCE condition, then photochemical loss dominates production. If transport drives ozone below its PCE condition, then photochemical production dominates loss. Gross features of ozone loss/production (L/P) inferred for the real atmosphere from data are also simulated using only eddy diffusion. This indicates that one must be careful in assigning a transport scheme for a two-dimensional model that mimics only behavior of the observed ozone L/P.
Explore the source record for details and available documents.
The effect of alternating low (0.01 g) and high (1.8 g) gravity force on the primary spacings in the dendrite structure in a directionally solidified Ni-based superalloy (PWA 1480, containing 5 pct Co, 10 pct Cr, 4 pct W, 12 pct Ta, 5 pct Al, 1.5 pct Ti, and the balance Ni) was investigated using samples solidified in a directional solidification furnace aboard the NASA KC-135 aircraft that made a series of low-g parabolas. The cross-section slices for each growth rate were polished and etched with Kallings II, and the primary dendritic arm spacings were measured using the method of Jacobi and Schwerdtfeger (1976). The arm spacings were found to fluctuate with gravity force, increasing as the gravity level decreased, and growing finer as gravity increased.
Measurements with the charge energy mass spectrometer of the AMPTE CCE spacecraft are used to determine the relative fluxes of these ions near the equatorial plane as a function of the drift shell parameter L, the magnetic activity index Kp, and the local time LT. The O(+) and O(2+) ions have radial profiles with maxima at about L = 5 and diurnal variations with a broad maximum on the dayside. The O(6+) and C(6+) ion fluxes increase with L between L = 5 and L = 7 and level off farther out. The diurnal variations of the relative O(6+) and C(6+) fluxes exhibit a pronounced minimum on the dayside. The observations can be interpreted in terms of ion convection from the tail onto quasi-trapped drift orbits and further radial diffusion onto closed drift shells. The maximum of the O(+) and O(2+) fluxes as well as the minimum of the O(6+) and C(6+) fluxes on the dayside can be explained by drift shell splitting. The inward transport is associated with ion losses, mainly by charge exchange. O(6+) and C(6+) ions are removed already at larger distances than O(+) and O(2+). As a result, the ionosphere contributes most of the oxygen ions in the magnetosphere. Important contributions from the solar wind are encountered in the outer magnetosphere.
An indirect method of estimating the surface heat flux from observations of vertical velocity variance at the lower mid-levels of the convective atmospheric boundary layer is described. Comparison of surface heat flux estimates with those from boundary-layer heating rates is good, and this method seems to be especially suitable for inhomogeneous terrain for which the surface-layer profile method cannot be used.
A computational fluid dynamics tool has been developed capable of analyzing the viscous supersonic/hypersonic flow about realistic configurations. This techniques can predict the flow in regions of canopies, wings, and canards in addition to the usual simple symmetric configurations. It also allows for interactions between aerodynamic surfaces such as the vortex interaction between canards and wings.
Turbulent flows subjected to various kinds of unsteady disturbances were simulated using a large-eddy-simulation computer code for flow in a channel. The disturbances were: a normal velocity expressed as a traveling wave on one wall of the channel; staggered blowing and suction distributions on the opposite walls of the channel; and oscillations of the mean flow through the channel. The wall boundary conditions were designed to simulate the effects of wakes of a stator stage passing through a rotor channel in a turbine. The oscillating flow simulated the effects of a pressure pulse moving over the rotor blade boundary layer. The objective of the simulations was to provide better understanding of the effects of time-dependent disturbances on the turbulence of a boundary layer and of the underlying physical phenomena regarding the basic interaction between the turbulence and external disturbances of the type found in turbomachinery. Results showed that turbulence is sensitive to certain ranges of frequencies of disturbances. However, no direct connection was found between the frequency of imposed disturbances and characteristic burst frequency of turbulence. New insight into the nature of turbulence at high frequencies was found. The viscous phenomena near solid walls was found to be the dominant influence for high frequency perturbations. At high frequencies, the turbulence was found to be undisturbed, remaining the same as for the steady mean flow. A transition range exists between the high frequency range and the low, or quasi-steady, range in which the turbulence is not predictable by either quasi-steady models or the steady flow model. The limiting lowest frequency for use of the steady flow turbulence model is that for which the viscous Stokes layer based on the blade passing frequency is thicker than the laminar sublayer.