Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Irradiation of UC1+x kernels using the MiniFuel vehicle: Microstructure, phase analysis, and initial post-irradiation examination

Uranium carbide is a candidate fuel form for a wide range of advanced reactors, including larger Generation IV reactors as well as small modular reactors and microreactors. However, its commercial deployment timeline faces challenges via traditional qualification approaches. To address this issue, an accelerated fission rate irradiation test was performed to collect basic fuel performance data to inform fuel performance models and potential future integral tests. Hyperstoichiometric UC (UC1+x) kernels were irradiated in the High Flux Isotope Reactor using the MiniFuel irradiation vehicle. The test matrix spanned two temperature regimes (700 °C and 800 °C) and burnup levels (1.8 % FIMA and 2.8 % FIMA). Between 21 and 63 kernels were tested at each unique temperature and burnup condition. As-fabricated microstructural analysis revealed a multiphase composition with UC, UC2, UC2−y, and U-C-O bearing phases for the irradiated kernels. Following irradiation, fission gas release, swelling, and microstructures were analyzed. Measured fission gas release was below 5 % for all irradiation conditions, reaching a maximum at the highest temperature and burnup condition. A binary swelling response was observed; the lower burnup and temperature conditions resulted in negligible swelling, but the higher burnup and temperature conditions produced significant anisotropic swelling and densification in a subset of kernels. The basic microstructural exams of kernels following irradiation were not capable of showing a correlation between kernels that exhibited excessive swelling and those that did not. Characterization of a subset of samples using the Advanced Photon Source and more detailed microstructural examination of unirradiated kernels revealed that a subset of kernels contained very high UC2 phase fractions. The anomalous swelling response is hypothesized to have been driven by this chemical variation. The results of this irradiation highlight the potential of accelerated fission rate irradiation testing to explore such behaviors and inform the development of fuel specifications.

Adorno Lopes, Denise [ORNL] (ORCID:000900023705987↗
DOE OSTI2026

Review of SiC material development for nuclear fusion applications: Cross-cutting research and emerging opportunities

The SiC-based materials, particularly SiC-fiber-reinforced SiC matrix (SiC/SiC) composites, show strong potential for structural and functional applications in future fusion power plants because they can operate at high temperatures with a range of coolants and breeders, thereby enabling higher energy conversion efficiency. Here, this paper presents recent advancements in the development of SiC-based materials, focusing on processing techniques and material performance and resistance under fusion-relevant environments. The processing activities have emphasized near-net-shape fabrication and the joining of SiC subcomponents, with processing methods and material compositions informed by previous irradiation experiments on various grades of SiC. Research on irradiation effects has remained focused on degradation mechanisms and the microstructural optimization of SiC/SiC composites irradiated to high neutron damage levels. Analysis of irradiation defects in SiC has advanced via the application of cutting-edge characterization methods, among which Raman spectroscopy is becoming a common tool to assess atomic-scale chemical disorder. Fusion–fission crosscutting irradiation research has explored combined effects in SiC/SiC composites with application-relevant geometries, including bowing of SiC/SiC composite channels under neutron flux gradients, stress evolution in SiC/SiC composite tubes under through-thickness temperature gradients, and irradiation-enhanced corrosion in SiC. Finally, research opportunities for component testing and assessment under fusion-relevant conditions, in support of emerging concepts from the private fusion sector, are discussed.

Advanced manufacturing↗
DOE OSTI2026

Elucidating microstructural evolution and hardness variation across friction self-piercing riveted Al-7055 using synchrotron X-ray scattering and advanced microscopy techniques

Friction self-piercing riveting (FSPR) is a unique hybrid joining technique that combines the advantages of mechanical interlocking, frictional heat, and solid-state joining (if metallurgically compatible) to produce crack free joints in high strength and/or low-ductility alloys at room temperature. Here, in the current study, Al-7055 sheets were joined using FSPR for lightweight automotive applications and significant microhardness variations were observed across the joint cross-section. A detailed microstructural characterization at multiple length scales was carried out using advanced electron microscopy and X-ray scattering techniques to provide a fundamental understanding of the process-structure-property relationships. The relative contributions of microstructural characteristics at various length scales (i.e., grain size, dislocation density, solute concentration, precipitate nature) to strengthening were estimated using existent formulations (i.e., Hall-Petch, Taylor, precipitate bypass/shear equations) and correlated to the observed microhardness values across different regions. Small-angle X-ray scattering and scanning transmission electron microscopy revealed significant changes in the size and volume fraction of precipitate species, i.e., GP-I Zones, η′, and Mg/Zn solute co-clusters, depending on the process region. It was observed that the dissolution of the small η′/GP-I zones (T ∼ 150–200 °C) in the heat-affected zone were the key reason for the hardness drop. Further, it was shown that solid-solution, dislocation, grain size and solute co-cluster strengthening played a key role in the thermo-mechanically affected zone and grain-refined zone (GRZ). Finally, these observations were leveraged along with the Zener-Holloman relationship and grain size in the GRZ to estimate the peak joining temperature of the GRZ (∼ 350 °C) near the steel rivet.

aluminum 7xxx alloy↗
DOE OSTI2023

Quality Control Methods for Measurement of UCO Kernel Composition and SiC Microstructure

Quality control (QC) is critically important to tristructural-isotropic (TRISO) particle fuels owing to the complexity of and reliance on the fuel form to contain fission products during irradiation. Characterization methods for particle fuel QC have decades of history and have continued to develop as new insights into fuel performance inform revised fuel specifications and as advances in underlying technologies expand the possibilities of what may be characterized. Two relatively new methods for characterization of TRISO fuels have been published in open literature: optical microscopy image analysis for mixed uranium carbide/uranium oxide (UCO) kernel composition analysis and automated grain boundary detection in backscattered electron (BSE) images of the silicon carbide (SiC) layer in TRISO particles for grain size characterization. Suggestions and guidelines for the application of these methods to TRISO fuel qualification are provided in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Multi-modal tomographic imaging system for poolside characterization of nuclear test fuels: Design considerations and studies

Testing and qualification of advanced nuclear fuels involves an iterative process of prototyping, in-pile irradiation testing, and in-situ or ex-situ examination. Fuel restructuring and fission product migration during burnup are among the most important aspects of fuel evolution that affect several important performance characteristics such as heat removal, accident tolerance, and fission product retention. Pool-side non-destructive characterization techniques provide fuel developers with tools to understand fuel evolution at different points of burnup. A design for a compact, submersible, and multi-modal gamma-ray tomography system for imaging irradiated nuclear fuel is presented here. Detector selection, collimator geometry and fabrication, mechanical design, imaging protocol and acquisition speed are discussed. Modeling calculations show that sub-millimeter resolution can be achieved in both transmission computed tomography images as well as in emission computed tomography images in a matter of hours. Several design compromises and fabrication challenges are discussed which should be taken into consideration for future submersible gamma-ray tomography instruments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Protoplast-Based Transient Expression and Gene Editing in Shrub Willow ( Salix purpurea L .)

Shrub willows (Salix section Vetrix) are grown as a bioenergy crop in multiple countries and as ornamentals across the northern hemisphere. To facilitate the breeding and genetic advancement of shrub willow, there is a strong interest in the characterization and functional validation of genes involved in plant growth and biomass production. While protocols for shoot regeneration in tissue culture and production of stably transformed lines have greatly advanced this research in the closely related genus Populus, a lack of efficient methods for regeneration and transformation has stymied similar advancements in willow functional genomics. Moreover, transient expression assays in willow have been limited to callus tissue and hairy root systems. Here we report an efficient method for protoplast isolation from S. purpurea leaf tissue, along with transient overexpression and CRISPR-Cas9 mediated mutations. This is the first such report of transient gene expression in Salix protoplasts as well as the first application of CRISPR technology in this genus. These new capabilities pave the way for future functional genomics studies in this important bioenergy and ornamental crop.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Closing the Gap Between Modeling and Experiments in the Self-assembly of Biomolecules at Interfaces and in Solution

Molecular self-assembly is a powerful tool in materials design, wherein non-covalent interactions like electrostatic, hydrophobic, hydrogen bonding, and van der Waals can be exploited to produce supramolecular nanostructures that are functional and highly tunable. Biomolecules are attractive building blocks, as they are biocompatible, biodegradable and adopt a wide array of higher order structures. Moreover, naturally occurring protein systems display a manifold of structures and interactions that can be replicated in synthetic biomolecules. In this perspective, we highlight advances in multiscale simulation techniques across broad spatiotemporal scales that can aid in characterizing self-assembly of hybrid and hierarchical bionanomaterial systems, with an emphasis on physics-based simulation approaches currently employed to study biomolecules at mineral interfaces. The power of these approaches is highlighted across a few recent areas where molecular simulations have advanced our understanding of self-assembly spanning peptides to protein self-assembly. Looking forward, we discuss how in the near future emerging methods in statistical and machine learning will advance this research field in all areas from expanding the capabilities of physics-based simulation methods to enabling new analyses of high throughput experiments. These advances will pave the way for understanding the molecular recognition patterns in systems that are dictated by self-assembly - biomineralizing peptides, hierarchical peptoids, and large protein assemblies, and will aid in the development of a new synthesis science for achieving precise molecular control in materials design

Sampath, Janani↗
DOE OSTI2024

Highly Responsive Polar Vortices in All‐Ferroelectric Heterostructures

Abstract The discovery of polar vortices and skyrmions in ferroelectric‐dielectric superlattices [such as (PbTiO 3 ) n /(SrTiO 3 ) n ] has ushered in an era of novel dipolar topologies and corresponding emergent phenomena. The key to creating such emergent features has generally been considered to be related to counterpoising strongly polar and non‐polar materials thus creating the appropriate boundary conditions. This limits the utility these materials can have, however, by rendering (effectively) half of the structure unresponsive to applied stimuli. Here, using advanced thin‐film deposition and an array of characterization and simulation approaches, polar vortices are realized in all‐ferroelectric trilayers, multilayers, and superlattices built from the fundamental building block of (PbTiO 3 ) n /(Pb x Sr 1− x TiO 3 ) n wherein in‐plane ferroelectric polarization in the Pb x Sr 1− x TiO 3 provides the appropriate boundary conditions. These superlattices exhibit substantially enhanced electromechanical and ferroelectric responses in the out‐of‐plane direction that arise from the ability of the polarization in both layers to rotate to the out‐of‐plane direction under field. In the in‐plane direction, the layers are found to be strongly coupled during switching and when heterostructured with ferroelectric‐dielectric building blocks, it is possible to produce multistate switching. This approach expands the realm of systems supporting emergent dipolar texture formation and does so with entirely ferroelectric materials thus greatly improving their responses.

Kavle, Pravin↗
DOE OSTI2024

Generation of macro- and microplastic databases by high-throughput FTIR analysis with microplate readers

Abstract FTIR spectral identification is today’s gold standard analytical procedure for plastic pollution material characterization. High-throughput FTIR techniques have been advanced for small microplastics (10–500 µm) but less so for large microplastics (500–5 mm) and macroplastics (> 5 mm). These larger plastics are typically analyzed using ATR, which is highly manual and can sometimes destroy particles of interest. Furthermore, spectral libraries are often inadequate due to the limited variety of reference materials and spectral collection modes, resulting from expensive spectral data collection. We advance a new high-throughput technique to remedy these problems using FTIR microplate readers for measuring large particles (> 500 µm). We created a new reference database of over 6000 spectra for transmission, ATR, and reflection spectral collection modes with over 600 plastic, organic, and mineral reference materials relevant to plastic pollution research. We also streamline future analysis in microplate readers by creating a new particle holder for transmission measurements using off-the-shelf parts and fabricating a nonplastic 96-well microplate for storing particles. We determined that particles should be presented to microplate readers as thin as possible due to thick particles causing poor-quality spectra and identifications. We validated the new database using Open Specy and demonstrated that additional transmission and reflection spectra reference data were needed in spectral libraries. Graphical abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Causality-respecting adaptive refinement for PINNs: enabling precise interface evolution in phase field modeling

Physics-informed neural networks (PINNs) have emerged as a powerful tool for solving physical systems described by partial differential equations (PDEs). However, their accuracy in dynamical systems, particularly those involving sharp moving boundaries with complex initial morphologies, remains a challenge. Here, this study introduces an approach combining residual-based adaptive refinement (RBAR) with causality-informed training to enhance the performance of PINNs in solving spatio-temporal PDEs. Our method employs a three-step iterative process: initial causality-based training, RBAR-guided domain refinement, and subsequent causality training on the refined mesh. Applied to the Allen-Cahn equation, a widely-used model in phase field simulations, our approach demonstrates significant improvements in solution accuracy and computational efficiency over traditional PINNs. Notably, we observe an ‘overshoot and relocate’ phenomenon in dynamic cases with complex morphologies, showcasing the method’s adaptive error correction capabilities. This synergistic interaction between RBAR and causality training enables accurate capture of interface evolution, even in challenging scenarios where traditional PINNs fail. Our framework not only resolves the limitations of uniform refinement strategies but also provides a generalizable methodology for solving a broad range of spatio-temporal PDEs. The enhanced performance of the RBAR–causality combined framework demonstrates its strong potential for advancing PINN-based modeling of physical systems characterized by complex, evolving interfaces.

Allen-Cahn equations↗
DOE OSTI2024

Raman spectroscopy of uranium nitride kernels

Uranium nitride is an advanced fuel candidate for a wide variety of advanced nuclear reactors. This work summarizes the first characterization of UN kernels by Raman spectroscopy. First-principles density functional theory calculations were performed to predict the Raman spectra of uranium sesquinitride (U 2 N 3 ), uranium dinitride (UN 2 ), uranium mononitride (UN), uranium monocarbide (UC), as well as U-N-C (UN 1-x C x ) and a U-N-C-O mixture. Further, a core–shell structure was identified by scanning electron microscopy and Raman spectroscopy imaging. A signal at ~500 cm -1 was identified on the periphery of the core-shell structure, possibly corresponding to U 2 N 3 and/or UN 2 . This signal broadens and shifts to 470 cm -1 because of the formation of UNC, UNCO or U 2 N 3+x structures. The culmination of this work demonstrates the feasibility of using Raman spectroscopy to identify variations in composition and phases in UN kernels.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Covalent Adaptable Networks: Reprocessable Cross-Linked Polymers

Thermoset polymers have desirable properties, such as excellent thermal and mechanical stability, but their covalent cross-links typically prevent repair or recycling. By enabling and controlling dynamic exchange reactions within polymer networks, their covalent bonds rearrange and allow the polymer to be reshaped. These viscoelastic polymer networks, now known as covalent adaptable networks (CANs), are an important frontier for improving plastic circularity, as well as for designing valuable stimuli-responsive materials. This Review describes the history of CANs, dating back to the early days of polymer science, and the evolution of their classification and nomenclature. A comprehensive survey of dynamic reactions and linkage chemistries is provided, as well as methods to characterize and reprocess CANs. Beyond straightforward reprocessing, many advanced applications of CANs and their composites are now emerging. Lastly, we provide perspective on how the development of new chemistries, strategies to control stimuli-responsive bond exchange and mechanical properties, and a deep understanding of exchange reactions will advance this field toward scalable, sustainable, and high-value materials.

Sun, Molly [Northwestern University, Evanston, IL ↗
DOE OSTI2024

Gold–Thiolate Nanocluster Dynamics and Intercluster Reactions Enabled by a Machine Learned Interatomic Potential

Monolayer protected metal clusters comprise a rich class of molecular systems and are promising candidate materials for a variety of applications. While a growing number of protected nanoclusters have been synthesized and characterized in crystalline forms, their dynamical behavior in solution, including prenucleation cluster formation, is not well understood due to limitations both in characterization and first-principles modeling techniques. Recent advancements in machine-learned interatomic potentials are rapidly enabling the study of complex interactions such as dynamical behavior and reactivity on the nanoscale. Here, we develop an Au-S-C-H atomic cluster expansion (ACE) interatomic potential for efficient and accurate molecular dynamics simulations of thiolate-protected gold nanoclusters (Au n (SCH 3 ) m ). Trained on more than 30,000 density functional theory calculations of gold nanoclusters, the interatomic potential exhibits ab initio level accuracy in energies and forces and replicates nanocluster dynamics including thermal vibration and chiral inversion. Long dynamics simulations (up to 0.1 μs time scale) reveal a mechanism explaining the thermal instability of neutral Au 25 (SR) 18 clusters. Specifically, we observe multiple stages of isomerization of the Au 25 (SR) 18 cluster, including a chiral isomer. Additionally, we simulate coalescence of two Au 25 (SR) 18 clusters and observe series of clusters where the formation mechanisms are critically mediated by ligand exchange in the form of [Au-S] n rings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scattering-type Scanning Near-Field Optical Microscopy of Polymer-Coated Gold Nanoparticles

Scattering-type scanning near-field optical microscopy (s-SNOM) has emerged over the past years as a powerful characterization tool that can probe important properties of advanced materials and biological samples in a label-free manner, with spatial resolutions lying in the nanoscale realm. In this work, we explore such usefulness in relationship with an interesting class of materials: polymer-coated gold nanoparticles (NPs). As thoroughly discussed in recent works, the interplay between the Au core and the polymeric shell has been found to be important in many applications devoted to biomedicine. We investigate bare Au NPs next to polystyrenesulfonate (PSS) and poly(diallyldimethylammonium chloride) (PDDA) coated ones under 532 nm laser excitation, an wavelength matching the surface plasmon band of the custom-synthesized nanoparticles. We observe consistent s-SNOM phase signals in the case of bare and shallow-coated Au NPs, whereas for thicker shell instances, these signals fade. For all investigated samples, the s-SNOM amplitude signals were found to be very weak, which may be related to reduced scattering efficiency due to absorption of the incident beam. We consider these observations important, as they may facilitate studies and applications in nanomedicine and nanotechnology where the precise positioning of polymer-coated Au NPs with nanoscale resolution is needed besides their dielectric function and related intrinsic optical properties, which are also quantitatively available with s-SNOM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The obligate intracellular bacterium Orientia tsutsugamushi differentiates into a developmentally distinct extracellular state

Orientia tsutsugamushi (Ot) is an obligate intracellular bacterium in the family Rickettsiaceae that causes scrub typhus, a severe mite-borne human disease. Its mechanism of cell exit is unusual amongst Rickettsiaceae, as Ot buds off the surface of infected cells enveloped in plasma membrane. Here, we show that Ot bacteria that have budded out of host cells are in a distinct developmental stage compared with intracellular bacteria. We refer to these two stages as intracellular and extracellular bacteria (IB and EB, respectively). These two forms differ in physical properties: IB is both round and elongated, and EB is round. Additionally, IB has higher levels of peptidoglycan and is physically robust compared with EB. The two bacterial forms differentially express proteins involved in bacterial physiology and host-pathogen interactions, specifically those involved in bacterial dormancy and stress response, and outer membrane autotransporter proteins ScaA and ScaC. Whilst both populations are infectious, entry of IB Ot is sensitive to inhibitors of both clathrin-mediated endocytosis and macropinocytosis, whereas entry of EB Ot is only sensitive to a macropinocytosis inhibitor. Our identification and detailed characterization of two developmental forms of Ot significantly advances our understanding of the intracellular lifecycle of an important human pathogen.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Time-of-flight detection of terahertz phonon-polariton

A polariton is a fundamental quasiparticle that arises from strong light-matter interaction and as such has attracted wide scientific and practical interest. When light is strongly coupled to the crystal lattice, it gives rise to phonon-polaritons (PPs), which have been proven useful in the dynamical manipulation of quantum materials and the advancement of terahertz technologies. Yet, current detection and characterization methods of polaritons are still limited. Traditional techniques such as Raman or transient grating either rely on fine-tuning of external parameters or complex phase extraction techniques. To overcome these inherent limitations, we propose and demonstrate a technique based on a time-of-flight measurement of PPs. We resonantly launch broadband PPs with intense terahertz fields and measure the time-of-flight of each spectral component with time-resolved second harmonic generation. The time-of-flight information, combined with the PP attenuation, enables us to resolve the real and imaginary parts of the PP dispersion relation. We demonstrate this technique in the van der Waals magnets NiI 2 and MnPS 3 and reveal a hidden magnon-phonon interaction. We believe that this approach will unlock new opportunities for studying polaritons across diverse material systems and enhance our understanding of strong light-matter interaction.

condensed-matter physics↗
DOE OSTI2026

Four ppm measurement of the antihydrogen ground-state hyperfine splitting

The hydrogen atom is a touchstone for the foundations, evolution and frontiers of quantum theory. Key spectral lines of this atom have been determined to remarkable precision. Our research focuses on the study of antihydrogen, the antimatter counterpart of hydrogen. We test fundamental symmetries of nature (such as simultaneous charge conjugation, parity inversion, and time reversal or CPT symmetry) through precision comparisons of these atomic systems. Recent 1S–2S spectroscopic measurements on trapped antihydrogen have achieved relative precisions of parts per trillion. However, the ground-state hyperfine splitting, which is sensitive to the internal structure of the antiproton, has only been measured to 400 parts per million (ppm). Here we report a 4 ppm measurement of the antihydrogen ground-state hyperfine splitting energy a 1S , advancing the state-of-the-art precision by two orders of magnitude. From microwave spectroscopy experiments with roughly 24,000 anti-atoms, we determine ${a}_{1{\rm{S}}}/h=\mathrm{1,420,404.8}\pm 1.1(\mathrm{stat.})\pm 5.6\,(\mathrm{sys.})\,\text{kHz}$ in a 1-T magnetic field, consistent with expectations for hydrogen. At this level, our measurement is sensitive to the internal structure of the antiproton, which contributes at about 40 ppm and is approaching the limit of existing theoretical analyses. The gains we report are the product of marked advances in magnetic trap field control, stabilization and characterization; anti-atom spin-state manipulation; and improved antihydrogen accumulation rate.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Enabling high-throughput enzyme discovery and engineering with a low-cost, robot-assisted pipeline

Abstract As genomic databases expand and artificial intelligence tools advance, there is a growing demand for efficient characterization of large numbers of proteins. To this end, here we describe a generalizable pipeline for high-throughput protein purification using small-scale expression in E. coli and an affordable liquid-handling robot. This low-cost platform enables the purification of 96 proteins in parallel with minimal waste and is scalable for processing hundreds of proteins weekly per user. We demonstrate the performance of this method with the expression and purification of the leading poly(ethylene terephthalate) hydrolases reported in the literature. Replicate experiments demonstrated reproducibility and enzyme purity and yields (up to 400 µg) sufficient for comprehensive analyses of both thermostability and activity, generating a standardized benchmark dataset for comparing these plastic-degrading enzymes. The cost-effectiveness and ease of implementation of this platform render it broadly applicable to diverse protein characterization challenges in the biological sciences.

36 MATERIALS SCIENCE↗