Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Low Temperature ABC-Type Ru Atomic Layer Deposition through Consecutive Dissociative Chemisorption, Combustion, and Reduction Steps

Thermal atomic layer deposition (ALD) of noble metals is frequently performed using molecular oxygen as the nonmetal precursor to effect a combustion-type chemistry at relatively high temperatures of 300 °C. Bis(ethylcyclopentadienyl)ruthenium (Ru(EtCp)2) is one of the common used metal precursors for Ru ALD. Using Ru(EtCp)2 and oxygen as reactants, Ru ALD was acheived at near 300 °C. Here, we demonstrate that Ru ALD can proceed at as low as 150 °C by using successive exposures to oxygen and hydrogen as the co-reactants. In situ quartz crystal microbalance (QCM) and quadrupole mass spectroscopy (QMS) measurements both suggest that this ABC-type ALD occurs through dissociative chemisorption, combustion, and reduction for the Ru(EtCp)2, oxygen and hydrogen steps, respectively, in a similar manner to processes using ozone and hydrogen as co-reactants reported previously. Moreover, we believe this molecular O2 and H2 based ABC-type ALD could be exploited for the ALD of other noble metals to decrease the deposition temperature and reduce oxygen impurities.

36 MATERIALS SCIENCE↗

Metal–Ligand Cooperativity Promoting Sulfur Atom Transfer in Ferrous Complexes and Isolation of a Sulfurmethylenephosphorane Adduct

Here, the reaction of elemental sulfur with the cis-divacant octahedral complex [(pyrr 2 py)Fe(OEt 2 )] (1; pyrr 2 py 2– = 3,5- t Bu 2 -bis(pyrrolyl)pyridine) yields the iron dimer [(pyrr-1-S-pyrrpy)Fe] 2 (2; pyrr-1-S-pyrrpy 2– = 3,5-( t Bu2-pyrrolyl)(1-S-3,5-tBu2-pyrrolyl)pyridine) resulting from a pyrr 2 py 2– ligand based S-oxidation of one pyrrole arm. Addition of the phosphorus ylide H 2 CPPh 3 to 1 forms the ylide adduct [(pyrr 2 py)Fe(CH 2 PPh 3 )] (3), which upon reaction with elemental sulfur produces a rare example of a sulfurmethylenephosphorane adduct, [(pyrr 2 py)Fe(SCH 2 PPh 3 )] (4). The sulfur-oxidized pyrrole group of the ligand pyrr-1-S-pyrrpy 2– can be reversed, since complex 2 exhibits S atom transferability via the addition of 2 equiv of H 2 CPPh 3 to yield a mixture of compounds 3 and 4. For all complexes reported, the ferrous ion remains S = 2. Complexes 2–4 were characterized by single-crystal X-ray diffraction as well as 1 H NMR spectroscopy, solid and solution magnetic studies, and 57 Fe Mössbauer spectroscopic measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extension of structure-reactivity correlations for the hydrogen abstraction reaction by bromine atom and comparison to chlorine atom and hydroxyl radical

Recently we presented structure-reactivity correlations for the gas-phase ambient-temperature rate constants for hydrogen abstraction from sp 3 -hybridized carbon by chlorine atom and hydroxyl radical (Cl•/HO• + HCR 3 → HCl/HOH + •CR 3 ); the reaction enthalpy effect was represented by the independent variable Δ r H and the polar effect by the independent variables F and R, the Hammett constants for field/inductive and resonance effects. Both these reactions are predominantly exothermic and have early transition states. Here we present a parallel treatment for Br• whose reaction is significantly endothermic with a correspondingly late transition state. In spite of lower expectations because the available data base is less extensive and much more scattered and because long temperature extrapolations are often required, the resulting least-squares fit (log k 298,Br = –0.147 Δ r H –4.32 ΣF –4.28 ΣR –12.38 with r 2 = 0.92) was modestly successful and useful for initial predictions. The coefficient of Δ r H was ~4-fold greater, indicative of the change from an early to a late transition state; meanwhile the sizable coefficients of ΣF and ΣR indicate the persistence of the polar effect. Although the mean unsigned deviation of 0.79 log k 298 units is rather large, it must be considered in the context of a total span of over 15 log units in the data set. Lastly, the major outliers are briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Submonolayer Is Enough: Switching Reaction Channels on Pt/SiO 2 by Atomic Layer Deposition

The reaction mechanism of CO 2 with H 2 is studied on platinum nanoparticles supported on fumed silica. It is found that platinum nanoparticle size, reaction temperature, and metal oxide promoters play important roles in determining the reaction rate and the mechanism of forming surface carbonyl species. Metal oxide promoters consist of sub-monolayer titanium oxide or aluminum oxide overcoated onto the catalysts by atomic layer deposition (ALD). Furthermore, these alter the CO formation rate, influence the adsorption and desorption behavior, and switch the surface reaction channel from Eley-Rideal to Langmuir-Hinshelwood mechanism due to an enhancement of CO 2 affinity to the metal-metal oxide interface. At the temperatures relevant for catalytic turnover, ALD overcoating significantly increases catalytic activity in CO 2 hydrogenation to CH 4 and CO, while the identity of the oxide overcoat helps control product selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Number Dependent “Structural Transitions” in Ordered Lanthanide Monolayers: Role of the Hydration Shell

When lanthanide ions are present in the aqueous subphase of a floating monolayer (Langmuir film), the ions attracted to the interface will in many cases form commensurate and/or incommensurate two-dimensional structures. These lattices depend not only on the molecules forming the monolayer, but also on the atomic number of the lanthanide, with a sudden change between the lattice formed by lighter ions and that formed by heavier ions under a given monolayer. Since there are few other relevant differences between the lanthanides, we attribute the Z-dependent “transition” to the number of water molecules associated with each ion. Finally, the first hydration shell is thought to vary continuously from ~9 in lighter lanthanides to ~8 in heavier lanthanides.

Miller, Mitchell↗

Dynamics of Back Electron Transfer in Dye-Sensitized Solar Cells Featuring 4-tert-Butyl-Pyridine and Atomic-Layer-Deposition Alumina as Surface Modifiers.

A series of dye-sensitized solar cells (DSCs) was constructed with TiO2 nanoparticles and N719 dye. The standard I-3(-)/I- redox shuttle and the Co(1,10-phenanthroline)(3)(3+/2+) shuttle were employed. DSCs were modified with atomic-layered-deposited (ALD) coatings of Al2O3 and/or with the surface-adsorbing additive 4-tert-butyl-pyridine. Current-voltage data were collected to ascertain the influence of each modification upon the back electron transfer (ET) dynamics of the DSCs. The primary effect of the additives alone or in tandem is to increase the open-circuit voltage. A second is to alter the short-circuit current density, J(SC). With dependence on the specifics of the system examined, any of a myriad of dynamics-related effects were observed to come into play, in both favorable (efficiency boosting) and unfavorable (efficiency damaging) ways. These effects include modulation of (a) charge-injection yields, (b) rates of interception of injected electrons by redox shuttles, and (c) rates of recombination of injected electrons with holes on surface-bound dyes. In turn, these influence charge-collection lengths, charge-collection yields, and onset potentials for undesired dark current. The microscopic origins of the effects appear to be related mainly to changes in driving force and/or electronic coupling for underlying component redox reactions. Perhaps surprisingly, only a minor role for modifier-induced shifts in conduction-band-edge energy was found. The combination of DSC-efficiency-relevant effects engendered by the modifiers was found to vary substantially as a function of the chemical identity of the redox shuttle employed. While types of modifiers are effective, a challenge going forward will be to construct systems in ways in which the benefits of organic and inorganic modifiers can be exploited in fully additive, or even synergistic, fashion.

Katz, Michael J.↗

Genesis and evolution of surface species during Pt atomic layer deposition on oxide supports characterized by in-situ XAFS analysis and water-gas shift reaction.

Platinum atomic layer deposition (ALD) using MeCpPtMe{sub 3} was employed to prepare high loadings of uniform-sized, 1-2 nm Pt nanoparticles on high surface area Al{sub 2}O{sub 3}, TiO{sub 2}, and SrTiO{sub 3} supports. X-ray absorption fine structure was utilized to monitor the changes in the Pt species during each step of the synthesis. The temperature, precursor exposure time, treatment gas, and number of ALD cycles were found to affect the Pt particle size and density. Lower-temperature MeCpPtMe{sub 3} adsorption yielded smaller particles due to reduced thermal decomposition. A 300 C air treatment of the adsorbed MeCpPtMe{sub 3} leads to PtO. In subsequent ALD cycles, the MeCpPtMe{sub 3} reduces the PtO to metallic Pt in the ratio of one precursor molecule per PtO. A 200 C H{sub 2} treatment of the adsorbed MeCpPtMe{sub 3} leads to the formation of 1-2 nm, metallic Pt nanoparticles. During subsequent ALD cycles, MeCpPtMe{sub 3} adsorbs on the support, which, upon reduction, yields additional Pt nanoparticles with a minimal increase in size of the previously formed nanoparticles. The catalysts produced by ALD had identical water-gas shift reaction rates and reaction kinetics to those of Pt catalysts prepared by standard solution methods. ALD synthesis of catalytic nanoparticles is an attractive method for preparing novel model and practical catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗