Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Compositional effects in Ag 2 ZnSnSe 4 thin films and photovoltaic devices

Ag 2 ZnSnSe 4 (AZTSe) is a relatively new n-type photovoltaic (PV) absorber material which has recently demonstrated a conversion efficiency of ~5% in a Schottky device architecture. To date, little is known about how the influence of composition on AZTSe material properties and the resulting PV performance. In this study, the Ag/Sn ratio is shown to be critical in the controlling grain growth, non-radiative recombination, and the bulk defect structure of the absorber. Insufficient Ag (relative to Zn and Sn) results in small grains, low photoluminescence intensities, and band gap narrowing, possibly due to an increase in the bulk defect density. Additionally, etching the AZTSe films in KCN prior to junction formation is found to be important for achieving reproducible efficiencies. Surface analysis using Auger Nanoprobe Microscopy analysis reveals that a KCN etch can selectively remove potentially harmful Ag-rich secondary phases, therefore improving the MoO 3 /AZTSe junction quality. Moreover, grain boundaries in AZTSe are found to be enriched in Sn and O following KCN; the role this oxide plays in surface passivation and junction formation has yet to be determined.

36 MATERIALS SCIENCE↗

Heterogeneous solute segregation suppresses strain localization in nanocrystalline Ag-Ni alloys

Solute segregation to individual grain boundaries is used by design to produce strong and stable nanocrystalline metallic alloys. Grain-boundary segregation, however, is known to cause adverse embrittlement effects from a strain-localization failure mechanism that imposes significant material limitations for structural applications. Here, using atomistic simulations, it is discovered that heterogeneous Ni segregation in nanocrystalline Ni-mixed Ag alloys dramatically shuts down localized shear bands during plastic deformation, while simultaneously increasing the tensile strength. Nanocrystalline Cu-mixed Ag metals are predicted to exhibit standard homogeneous Cu segregation and a tensile strength that saturates above a solute concentration of 8 at.% due to glass-like shear localization induced by grain boundaries. By contrast, it is found that heterogeneous Ni segregation in nanocrystalline Ag-Ni alloys forms solute-rich clusters along interfaces leading to strain delocalization at high strain and continuous strengthening at high solute concentrations up to 15 at.%. As a result, this study reveals the importance of heterogeneous versus homogeneous segregation behaviors on strain localization and points to a fundamentally new strategy to design failure-resistant nanostructured materials through grain boundary segregation engineering.

36 MATERIALS SCIENCE↗

Dual-atom Ag 2 /graphene catalyst for efficient electroreduction of CO 2 to CO

Electrochemical reduction of CO 2 into value-added carbon compounds offers a promising strategy to mitigate global warming, but present challenges for chemistry due to the poor selectivity and stability of electrocatalysts. In this work, we report a dual-atom Ag 2 /graphene catalyst featuring well-defined AgN 3 -AgN 3 active site for CO 2 electrochemical reduction. This dual-atom catalyst can drive CO 2 reduction reaction at a potential as high as -0.25 V, and exhibit excellent CO Faradic efficiency up to 93.4 % with a current density of 11.87 mA cm -2 at -0.7 V and long-term stability, far surpassing the single-atom Ag 1 /graphene and the traditional silver nanoparticle catalysts. Finally, DFT calculations reveal that the dual-atom Ag site lowers the barrier for the formation of *COOH by stabilizing the *CO 2 through the concomitant interactions with the C and an O atom of CO 2 , resulting in excellent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quaternary Laves-type phase in Ag-Cu-In-Ga thin films

Formation of a new quaternary Laves-type phase in sputter-deposited and evaporated thin films of Ag-Cu-In-Ga (ACIG) is reported. Films with different compositions are analyzed by energy dispersive x-ray spectroscopy and x-ray diffraction to determine composition and structure based on Rietveld whole pattern refinement. Annealing and partial reaction with H 2 Se are used to study the phase. The quaternary phase corresponds to (Cu 1-x Ga x ) 2 (Ag y In 1-y ) with x ≈ 0.2 and ≈ 0.3. It has a Cu 2 Mg-type crystal structure with space group of Fd$\bar{3}$m and lattice parameter of 7.090. Finally, formation of this phase is reported in the composition range (Ag + Cu)/(In + Ga) ≈ 0.8–0.9 suitable for precursors to the formation of chalcopyrite thin films for photovoltaic application.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, structural, Raman, and luminescence studies of Am[M(CN){sub 2}]{sub 3}.3H{sub 2}O and Nd[M(CN){sub 2}]{sub 3}.3H{sub 2}O (M=Ag, Au): Bimetallic coordination polymers containing both trans-plutonium and transition metal elements

The polymeric compounds consisting of the man-made element, americium, and gold and silver dicyanides were prepared under mild hydrothermal conditions at 120 deg. C. It was found that the americium ion and the transition metal ions are interconnected through cyanide bridging in the compounds. Given the similarities in the radii of americium and neodymium, crystals of the latter were also characterized for comparison purposes. The four compounds are isostructural and crystallize in the hexagonal space group, P6{sub 3}/mcm, with only slight differences in their unit cell parameters. Crystallographic data (MoK{alpha}, {lambda}=0.71073 A): Am[Ag(CN){sub 2}]{sub 3}.3H{sub 2}O (1), a=6.7205(10) A, c=18.577(3) A, V=726.64(19), Z=2; Am[Au(CN){sub 2}]{sub 3}.3H{sub 2}O (2),a=6.666(2) A, c=18.342(3) A, V=705.9(4), Z=2; Nd[Ag(CN){sub 2}]{sub 3}.3H{sub 2}O (3), a=6.7042(4) A, c=18.6199(14) A, V=724.77(8), Z=2; and Nd[Au(CN){sub 2}]{sub 3}.3H{sub 2}O (4), a=6.6573(13) A, c=18.431(4) A, V=707.2(2), Z=2. The coordination around the Am and/or Nd consists of six N-bound CN{sup -} groups resulting in a trigonal prismatic arrangement. Three capping oxygen atoms of coordinated water molecules complete the tricapped trigonal prismatic coordination environment, providing a total coordination number of nine for the f-elements. Raman spectroscopy, which compliments the structural analyses, reveals that the four compounds display strong signals in the {nu}{sub CN} stretching region. When compared with KAg(CN){sub 2} or KAu(CN){sub 2}, the {nu}{sub CN} stretching frequencies for these compounds blue-shift due to bridging of the dicyanometallate ions with the f-element ions. There is subsequent reduction in electron density at the cyanide center. Compared with the silver systems, the {nu}{sub CN} frequency appears at higher energy in the gold dicyanide complexes. This shift is consistent with the structural data where the carbon-nitrogen bond distance is found to be shorter in the gold dicyanides. - Graphical abstract: Coordination polymeric compounds between the 'man-made' trans-plutonium element, americium, and transition metal ions were prepared using the hydrothermal synthetic procedure. The Am{sup 3+} ion and the transition metals, Au and/or Ag, are interconnected through cyanide bridging. The coordination around americium consists of six CN{sup -} groups coordinated through the N atoms resulting in a trigonal prismatic environment. Three oxygen atoms of coordinated water molecules complete the tricapped trigonal prismatic coordination environment for Am{sup 3+}, providing a total coordination number of 9.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of co-doping Ag and Sb on microstructure and thermoelectric properties of PbTe prepared by combining hydrothermal synthesis and melting

Ag and Sb co-doped PbTe (AgPb{sub 18}SbTe{sub 20}) and pure PbTe nanopowders were hydrothermally synthesized. The synthesized nanopowders were heated at 1173-1223 K in vacuum for 5 h followed by a slow cooling. The nanopowders and the bulk samples were characterized by X-ray diffraction and electron microscopy, respectively. Electrical transport properties of the bulk samples were measured from room temperature to {approx}773 K. The results showed that co-doping Ag and Sb into PbTe has significant effects on both the nanopowders and bulk samples. Bulk AgPb{sub 18}SbTe{sub 20} sample showed n-type conduction in the whole temperature range measured, while bulk PbTe sample exhibited a transition from p- to n-type conduction at {approx}500 K. The thermoelectric properties of PbTe were markedly improved after co-doping of Ag and Sb. The AgPb{sub 18}SbTe{sub 20} sample has a dimensionless figure of merit of {approx}0.94 at 723 K. - Graphical abstract: SEM image of the fracture surface of an AgPb{sub 18}SbTe{sub 20} material prepared by combining hydrothermal synthesis and melting. The material has a ZT value of about 0.94 at 723 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Syntheses, crystal structures and fluorescent properties of Cd(II), Hg(II) and Ag(I) coordination polymers constructed from 1H-1,2,4-triazole-1-acetic acid

Three new d{sup 10} coordination polymers, namely [Cd(taa)Cl]{sub n}1, [Hg(taa)Cl]{sub n}2, and [Ag{sub 1.5}(taa)(NO{sub 3}){sub 0.5}]{sub n}3 (taa=1H-1,2,4-triazole-1-acatate anion) have been prepared and characterized by elemental analysis, IR, and single crystal X-ray diffraction. Compound 1 consists of two-dimensional layers constructed by carboxyl-linked helical chains, which are further linked through carboxyl group to generate a unique 3D open framework. Topological analysis reveals that the structure of 1 can be classified as an unprecedented (3,8)-connected network with the Schlaefli symbol (4.5{sup 2}){sub 2}(4{sup 2}.5{sup 8}.6{sup 14}.7{sup 3}.8). Compound 2 manifests a doubly interpenetrated decorated alpha-polonium cubic network with the Schlaefli symbol of (4{sup 10}.6{sup 2}.8{sup 3}). Compound 3 consists of 2D puckered layers made up of Ag centers and taa{sup -} bridges. In addition, all of these compounds are photoluminescent in the solid state with spectra that closely resemble those of the ligand precursor. - Graphical abstract: Three new compounds based on 1H-1,2,4-triazole-1-acetic acid and Cd(II), Hg(II) and Ag(I) salts display luminescent properties and may be potential candidates for luminescent materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and structural properties of A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) chalcopyrite semiconductors

We have studied the structural and electronic properties of defect chalcopyrite semiconductors A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) using density functional theory (DFT) based first principle technique within tight binding linear muffin-tin orbital (TB-LMTO) method. Our calculated structural parameters such as lattice constants a and c, tetragonal distortion ({eta}=c/2a) are in good agreement with experimental work. Anion displacement parameters, bond lengths and bulk modulus are also calculated. Our band structure calculation suggests that these compounds are direct band gap semiconductors having band gaps 2.40, 2.50, 2.46 and 2.82 eV for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Calculated band gaps are in good agreement with other experimental and theoretical works within LDA limitation. We have made a quantitative estimation of the effect of p-d hybridization and structural distortion on the electronic properties. The reduction in band gap due to p-d hybridization is 19.47%, 21.29%, 0% and 0.7% for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Increment of the band gap due to structural distortion is 11.62%, 2.45%, 2.92% and 9.30% in case of AgAl{sub 2}Se{sub 4}, CuAl{sub 2}Se{sub 4}, CdAl{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4} respectively. We have also discussed the bond nature of all four compounds. - Graphical abstract: Band structure and TDOS show the band gaps and effect of structural distortion on electronic properties. PDOS shows effect of p-d hybridization on band gaps for all four compounds. Highlights: > (Ag/Cu/Cd/Zn)Al{sub 2} Se{sub 4} have direct band gap of 2.4, 2.5, 2.46 and 2.82 eV respectively. > p-d hybridization reduces band gaps by 19.5%, 21.3% for (Ag/Cu)Al{sub 2}Se{sub 4} respectively. > No effects of? p-d hybridization on the band gaps for (Cd/Zn)Al{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4}. > Significant enhancement in band gap due to structural distortion in all the compounds. > Effects of bond nature on band gaps are also studied in all the compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of cation ordering on the electronic and lattice dynamic properties of Ag₂CdGeS₄ polytypes: First-principle calculation

The electronic and lattice dynamic properties of I₂–II–IV–VI₄ quaternary diamond-like semiconductors have a tight connection with their application in the area of solar cell absorption, thermoelectric conversion and so on. Structural configuration of these compounds is focused in present study, although previous researches always pay close attention to compositional modulation. In this paper, Ag₂CdGeS₄ polytypes (two types of Pna2₁, one type of Pmn2₁) have chosen as the representation to establish the relationship between cation ordering and physiochemical properties based on first-principle theory. The results show that cation arrangement practically affects their electronic and lattice dynamic properties such as bonding strength, band structure as well as their infrared spectrum. Due to different cation arrangement, two types (named model S and model P) of the same space group Pna2₁ demonstrate different properties. For both model P and Pmn2₁ of different space group, their related properties are alike because of similar cation arrangement. With the resulting cationic Born effective charges, the origin of the difference in electronic properties for three types of Ag₂CdGeS₄ can be reasonably explained from the viewpoint of vibrational polarization. - Graphical abstract: First-principle calculations were used to investigate the effect of cation ordering on the electronic and lattice dynamic properties of Ag₂CdGeS₄ polytypes. Highlights: • Structural configuration was focused other than compositional modulation. • Establish the relationship between cation ordering and physicochemical properties. • Explain the reason of different band gap with Born effective charges. • Calculated infrared spectrum can be used to distinguish different polytypes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase equilibria in the quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} and physical properties of (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} single crystals

The quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} was investigated by differential thermal, X-ray phase, X-ray structure, microstructure analysis and microhardness measurements. Five quasi-binary phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were constructed. The character and temperature of the invariant processes were determined. The specific resistance of the single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} was measured, 7.5×10{sup 5} and 3.15×10{sup 5} Ω m, respectively, optical absorption spectra in the 600–1050 nm range were recorded at room temperature, and the band gap energy was estimated which is 1.95±0. 01 eV for both samples. - Graphical abstract: The article reports for the first time the investigated liquidus surface projection of the Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system and isothermal section at 820 K of the system. Five phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were built at the first time. The existence of the large region of the solid solutions based on AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} was investigated. The existence of two ternary phases was established in the Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown and some of optical properties of them were studied at first time. Display Omitted - Highlights: • Liquidus surface projection was built for Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. • Solid solution ranges of AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} were investigated. • Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown. • Some optical properties of these single crystals were studied.

36 MATERIALS SCIENCE↗

From Ag{sub 2}Sb{sub 2}O{sub 6} to Cd{sub 2}Sb{sub 2}O{sub 7}: Investigations on an anion-deficient to ideal pyrochlore solid solution

A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized through the standard solid state ceramic method. Each composition has been characterized by various different techniques, including powder X-ray diffraction, optical spectroscopy, electron paramagnetic resonance and {sup 121}Sb Mössbauer spectroscopy. Computational methods based on density functional theory complement this investigation. Photocatalytic activity has been studied, and transport properties have been measured on pellets densified by spark plasma sintering. The analysis of the data collected from these various techniques enables a comprehensive characterization of the complete solid solution and revealed an anomalous behavior in the Cd-rich end of the solid solution, which has been proposed to arise from a possible radical O{sup −} species in small concentrations. - Graphical abstract: A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized and investigated through various techniques including X-ray diffraction, electron paramagnetic spectroscopy, and {sup 121}Sb-Mössbauer spectroscopy. Optical and electrical measurements have been performed, and computational methods have been applied to determine the density of states. Photocatalytic activity was monitored by the degradation of Methylene Blue, and upon cadmium substitution, the degradation amount decreased, which is attributed primarily to the changing optical and electrical properties of the solid solution. Display Omitted - Highlights: • A complete solid solution between Ag{sub 2}Sb{sub 2}O{sub 6} and Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized. • XRD reveals a relatively constant lattice parameter as the series progresses. • Optical and electrical properties have been measured for the solid solution. • Computational methods have been used to determine the density of states. • Photocatalytic degradation of Methylene Blue decreased upon cadmium substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub ∞} (M=Zn, Mn): Three-dimensional chalcogenide frameworks constructed from quaternary metal selenide clusters with two different transition metals

Herein we report solvothermal syntheses of two new three-dimensional chalcogenide frameworks ([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub n} (M=Zn (1), Mn (2)), which consist of quaternary metal selenide clusters with two different transition metals. The compounds represent the first Ag–Zn/Mn–Sn–Se based quaternary anionic frameworks. The optical studies show that the band gaps for 1 and 2 are 2.09 eV and 1.71 eV, respectively. Moreover, the photoelectrochemical study indicates that compound 1 displays n-type semiconducting behaviour and is photoactive under visible light illumination (λ>400 nm). - Graphical abstract: Two 3D framework selenides, [M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}] (M=Zn (1), Mn (2)), constructed from quaternary metal selenide clusters, have been solvothermally synthesized and are photoactive under visible light illumination. - Highlights: • Two new three-dimensional selenide frameworks. • Quaternary metal selenide clusters with two different transition metals. • Photoelectrochemical study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase equilibria in the quasiternary system Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} and optical properties of (Ga{sub 55}In{sub 45}){sub 2}S{sub 300}, (Ga{sub 54.59}In{sub 44.66}Er{sub 0.75}){sub 2}S{sub 300} single crystals

The quasiternary system Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} was investigated by differential thermal, X-ray diffraction analyses. The phase diagram of the Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} system and nine polythermal sections, isothermal section at 820 K and the liquidus surface projection were constructed. The existence of the large solid solutions ranges of binary and ternary compounds was established. The range of the existence of the quaternary phase AgGa{sub x}In{sub 5−x}S{sub 8} (2.25≤x≤2.85) at 820 K was determined. The single crystals (Ga{sub 55}In{sub 45}){sub 2}S{sub 300} and (Ga{sub 54.59}In{sub 44.66}Er{sub 0.75}){sub 2}S{sub 300} were grown by a directional crystallization method from solution-melt. Optical absorption spectra in the 500–1600 nm range were recorded. The luminescence of the (Ga{sub 54.59}In{sub 44.66}Er{sub 0.75}){sub 2}S{sub 300} single crystal shows a maximum at 1530 nm for the excitation wavelengths of 532 and 980 nm at 80 and 300 K. - Graphical abstract: Isothermal section of the quasiternary system Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} at 820 K and normalized photoluminescence spectra of the single crystal (Ga{sub 54.59}In{sub 44.66}Er{sub 0.75}){sub 2}S{sub 300} at 300 K. - Highlights: • Isothermal section at 820 K, liquidus surface projection were built for Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3}. • Optical properties of single crystals were studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag/α-Fe{sub 2}O{sub 3} hollow microspheres: Preparation and application for hydrogen peroxide detection

In this paper, we demonstrated a simple approach for preparing α-Fe{sub 2}O{sub 3} hollow spheres by mixing ferric nitrate aqueous and glucose in 180 °C. The glucose was found to act as a soft template in the process of α-Fe{sub 2}O{sub 3} hollow spheres formation. Ag/α-Fe{sub 2}O{sub 3} hollow nanocomposite was obtained under UV irradiation without additional reducing agents or initiators. Synthesized Ag/α-Fe{sub 2}O{sub 3} hollow composites exhibited remarkable catalytic performance toward H{sub 2}O{sub 2} reduction. The electrocatalytic activity mechanism of Ag/α-Fe{sub 2}O{sub 3}/GCE were discussed toward the reduction of H{sub 2}O{sub 2} in this paper. - Graphical abstract: Glucose is carbonized as carbon balls in the 180 °C hydrothermal carbonization process, which plays a role of a soft template. Carbon spherical shell is rich in many hydroxyls, which have good hydrophilicity and surface reactivity. When Fe(NO{sub 3}){sub 3} is added to the aqueous solution of Glucose, the hydrophilic -OH will adsorb Fe{sup 3+} to form coordination compound by coordination bond. α-FeOOH is formed on the surface of carbon balls by hydrothermal reaction. After calcination at 500 °C, carbon spheres react with oxygen to form carbon dioxide, which disappears in the air. Meanwhile α-FeOOH is calcined to form α-Fe{sub 2}O{sub 3} hollow spheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Loading Ag nanoparticles on Cd(II) boron imidazolate framework for photocatalysis

An amine-functionalized Cd(II) boron imidazolate framework (BIF-77) with three-dimensional open structure has been successfully synthesized, which can load Ag nanoparticles (NPs) for photocatalytic degradation of methylene blue (MB). - Graphical abstract: An amine-functionalized neutral Cd(II) boron imidazolate framework can load Ag NPs and show excellent photocatalytic degradation behavious for MB. - Highlights: • Amine-functionalization. • Neutral boron imidazolate framework. • Loading Ag nanoparticles (NPs). • Photocatalytic degradation of methylene blue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchical active factors to band gap and nonlinear optical response in Ag-containing quaternary-chalcogenide compounds

In this research work, Ag-containing quaternary-chalcogenide compounds KAg{sub 2}TS{sub 4} (T=P, Sb) (I-II) and RbAg{sub 2}SbS{sub 4} (III) have been studied by means of Density Functional Theory as potential IR nonlinear optical materials. The origin of wide band gap, different optical anisotropy and large SHG response is explained via a combination of density of states, electronic density difference and bond population analysis. It is indicated that the different covalent interaction behavior of P-S and Sb-S bonds dominates the band gap and birefringence. Specifically, the Ag-containing chalcogenide compound KAg{sub 2}PS{sub 4} possesses wide band gap and SHG response comparable with that of AgGaS{sub 2}. By exploring the origin of the band gap and NLO response for compounds KAg{sub 2}TS{sub 4} (T=P, Sb), we found the determination factor to the properties is different, especially the roles of Ag-d orbitals and bonding behavior of P-S or Sb-S. Thus, the compounds KAg{sub 2}TS{sub 4} (T=P, Sb) and RbAg{sub 2}SbS{sub 4} can be used in infrared (IR) region. - Graphical abstract: Metal thiophosphates RbPbPS{sub 4} and KSbP{sub 2}S{sub 6} have a similar band gap with KAg{sub 2}PS{sub 4}. However, based on first principles calculated results it shown that KAg{sub 2}PS{sub 4} possesses wide band gap (3.02 eV) and relatively large SHG response. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds

This work investigates the effects of molybdenum nanoparticles on the growth of interfacial intermetallic compound between Sn-3.8Ag-0.7Cu solder and copper substrate during multiple reflow. Molybdenum nanoparticles were mixed with Sn-3.8Ag-0.7Cu solder paste by manual mixing. Solder samples were reflowed on a copper substrate in a 250 Degree-Sign C reflow oven up to six times. The molybdenum content of the bulk solder was determined by inductive coupled plasma-optical emission spectrometry. It is found that upon the addition of molybdenum nanoparticles to Sn-3.8Ag-0.7Cu solder, the interfacial intermetallic compound thickness and scallop diameter decreases under all reflow conditions. Molybdenum nanoparticles do not appear to dissolve or react with the solder. They tend to adsorb preferentially at the interface between solder and the intermetallic compound scallops. It is suggested that molybdenum nanoparticles impart their influence on the interfacial intermetallic compound as discrete particles. The intact, discrete nanoparticles, by absorbing preferentially at the interface, hinder the diffusion flux of the substrate and thereby suppress the intermetallic compound growth. - Highlights: Black-Right-Pointing-Pointer Mo nanoparticles do not dissolve or react with the SAC solder during reflow. Black-Right-Pointing-Pointer Addition of Mo nanoparticles results smaller IMC thickness and scallop diameter. Black-Right-Pointing-Pointer Mo nanoparticles influence the interfacial IMC through discrete particle effect.

36 MATERIALS SCIENCE↗

Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn-3.5Ag-xTi active solders

Active solders Sn-3.5Ag-xTi varied from x = 0 to 6 wt.% Ti addition were prepared by vacuum arc re-melting and the resultant phase formation and variation of microstructure with titanium concentration were analyzed using X-ray diffraction, optical microscopy and scanning electron microscopy. The Sn-3.5Ag-xTi active solders are used as metallic filler to join with anodized 6061 Al alloy for potential applications of providing a higher heat conduction path. Their joints and mechanical properties were characterized and evaluated in terms of titanium content. The mechanical property of joints was measured by shear testing. The joint strength was very dependent on the titanium content. Solder with a 0.5 wt.% Ti addition can successfully wet and bond to the anodized aluminum oxide layers of Al alloy and posses a shear strength of 16.28 {+-} 0.64 MPa. The maximum bonding strength reached 22.24 {+-} 0.70 MPa at a 3 wt.% Ti addition. Interfacial reaction phase and chemical composition were identified by a transmission electron microscope with energy dispersive spectrometer. Results showed that the Ti element reacts with anodized aluminum oxide to form Al{sub 3}Ti-rich and Al{sub 3}Ti phases at the joint interfaces. - Highlights: Black-Right-Pointing-Pointer Active solder joining of anodized Al alloy needs 0.5 wt.% Ti addition for Sn-3.5Ag. Black-Right-Pointing-Pointer The maximum bonding strength occurs at 3 wt.% Ti addition. Black-Right-Pointing-Pointer The Ti reacts with anodized Al oxide to form Al{sub 3}Ti-rich and Al{sub 3}Ti at joint interface.

36 MATERIALS SCIENCE↗