Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Structural Changes in Self-Catalyzed Adsorption of Carbon Monoxide on 1,4-Phenylene Diisocyanide Modified Au(111)

The self-accelerated adsorption of CO on 1,4-phenylene diisocyanide (PDI)-derived oligomers on Au(111) is explored by reflection–absorption infrared spectroscopy and scanning tunneling microscopy. PDI incorporates gold adatoms from the Au(111) surface to form one-dimensional —(Au–PDI) n — chains that can also connect between gold nanoparticles on mica to form a conductive pathway between them. CO adsorption occurs in two stages; it first adsorbs adjacent to the oligomers that move to optimize CO adsorption. Further CO exposure induces PDI decoordination to form Au–PDI adatom complexes thereby causing the conductivity of a PDI-linked gold nanoparticle array on mica to decrease to act as a chemically drive molecular switch. This simple system enables the adsorption process to be explored in detail. DFT calculations reveal that both the —(Au–PDI) n — oligomer chain and the Au–PDI adatom complex are stabilized by coadsorbed CO. A kinetic “foot-in-the-door” model is proposed in which fluctuations in PDI coordination allow CO to diffuse into the gap between gold adatoms to prevent the PDI from reattaching, thereby allowing additional CO to adsorb, to provide kinetic model for allosteric CO adsorption on PDI-covered gold.

1,4-phenylene diisocyanide (PDI)↗

Acetylene and Ethylene Adsorption on a β-Mo 2 C(100) Surface: A Periodic DFT Study on the Role of C- and Mo-Terminations for Bonding and Hydrogenation Reactions

Mo 2 C catalysts are widely used in hydrogenation reactions; however, the role of the C and Mo terminations in these catalysts is not clear. Understanding the binding of adsorbates is key for explaining the activity of Mo 2 C. The adsorption of acetylene and ethylene, probe molecules representing alkynes and olefins, respectively, was studied in this paper on a β-Mo 2 C(100) surface with C and Mo terminations using calculations based on periodic density functional theory. Moreover, the role of the C/Mo molar ratio was investigated to compare the catalytic potential of cubic (δ-MoC) and orthorhombic (β-Mo 2 C) surfaces. The geometry and electronic properties of the clean δ-MoC(001) and β-Mo 2 C(100) surfaces have a strong influence on the binding of unsaturated hydrocarbons. The adsorption of ethylene is weaker than that of acetylene on the surfaces of the cubic and orthorhombic systems; adsorption of the hydrocarbons was stronger on β-Mo 2 C(100) than on δ-MoC(001). The C termination in β-Mo 2 C(100) actively participates in both acetylene and ethylene adsorption and is not merely a spectator. Finally, the results of this work suggest that the β-Mo 2 C(100)-C surface could be the one responsible for the catalytic activity during the hydrogenation of unsaturated C≡C and C=C bonds, while the Mo-terminated surface could be poisoned or transformed by the strong adsorption of C and CH x fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supercritical Fluid Adsorption to Weakly Attractive Solids: Universal Scaling Laws

In this study, adsorption of light hydrocarbons (C1–C3) confined in the pores of silica aerogel (nominal density 0.2 g/cm 3 ) was studied experimentally and by computer simulation. Five isotherms of ethane (25.0, 32.0, 32.3, 33.0, and 35.0 °C) were obtained over a temperature range including the critical temperature of the bulk fluid (T c = 32.18 °C) to ~220 bar by the vibrating tube densimetry (VTD) method, which yields unique information impossible to obtain by excess sorption measurements. Two isotherms (35 and 50 °C) of methane adsorption in SiO 2 aerogel were measured far above its critical temperature, T c = -82.59 °C, at 0–150 bar using a gravimetric method. The experimental pore fluid properties of methane, ethane, propane, and CO 2 (obtained earlier by VTD for the same SiO 2 aerogel sample) show behavior conforming to the principle of corresponding states over the entire covered reduced temperature ranges from T r = 0.976 to T r = 1.696. The magnitudes of the excess adsorption maxima and the reduced fluid densities where the maxima occur for C1–C3 hydrocarbons and CO 2 are similar functions of the reduced temperature. This behavior indicates that, at least under the conditions covered in this work, the differences in molecular size and shape have only minor impacts on the solid–fluid interactions underlying the adsorption behavior. Lastly, these findings are supported by large-scale GCMC simulations of a lattice gas confined in the pores of a computer representation of the SiO 2 aerogel framework, yielding excess adsorption isotherms in good agreement with experimental measurements, as well as the underlying microstructures of the adsorbed fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heats of Adsorption of N 2 , CO, Ar, and CH 4 versus Coverage on the Zr-Based MOF NU-1000: Measurements and DFT Calculations

Equilibrium adsorption isotherms at very low coverage (0 to ~0.1 monolayer) have been measured for four simple gases, N 2 , CO, Ar, and CH 4 , at several temperatures above 98 K on the metal-organic framework (MOF) NU-1000 (which has Zr 6 (μ 3 -OH) 4 (μ 3 -O) 4 (OH) 4 (OH 2 ) 4 nodes linked by pyrenes with -COO - end groups). From these, the differential isosteric heats of adsorption (Q st ) were determined versus coverage. These were compared to density functional calculations of the adsorption enthalpies on different sites, assuming that they are filled in a sequential order from the strongest to weakest binding. This comparison shows excellent quantitative agreement on the trends for the four gases, as well as reasonable agreement in the absolute magnitude of the adsorption energies. Here, this agreement indicates that the sites predicted by the density functional calculations to be populated at different coverages for the different gases are correct, thus further increasing our understanding of adsorption on this prototype MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Preference for Atom Adsorption on versus Intercalation into Multilayer Graphene

The thermodynamic preference of a foreign atom for adsorption on versus intercalation into a graphitic surface is of fundamental and widespread interest. From an exhaustive first-principles density functional theory investigation for 38 typical elements over the periodic table, we reveal a quasilinear correlation between the Shannon effective ionic radius and the chemical-potential difference for a single atom from adsorption to intercalation at multilayer graphene surfaces. A critical Shannon radius is found to be around 0.10 nm, below (above) which intercalation (adsorption) is more favorable for elements with ionic-like bonding after intercalation. Single atoms with van der Waals-biased bonding show some deviation from the linear relationship, while single atoms for the elements with covalent-like bonding do not favor intercalation relative to adsorption. An energy decomposition analysis indicates that the chemical-potential difference determining the thermodynamic preference of a foreign atom for adsorption versus intercalation results from the competition between the electronic and elastic strain effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Photodesorption of CO from Charged Point Defects on TiO 2 (110)

Adsorption and photodesorption of weakly-bound carbon monoxide, CO, from reduced and hydroxylated rutile TiO2(110) (r- and h- TiO2(110)) at sub-monolayer coverages is studied with atomically-resolved scanning tunneling microscopy (STM) along with ensemble-averaged temperature-programmed desorption (TPD) and angle-resolved photon-stimulated desorption (PSD) at low temperatures ( 50 K). STM data weighted by the concentration of each kind of adsorption sites on r-TiO2(110) give an adsorption probability which is the highest for the bridging oxygen vacancies (VO) and very low for the Ti5c sites closest to VO. Occupancy of the remaining Ti5c sites with CO is significant, but smaller than for VO. The probability distribution for the different adsorption sites corresponds to a very small difference in CO adsorption energies: < 0.02 eV. We also find that UV irradiation stimulates both diffusion and desorption of CO at low temperature. CO photodesorbs primarily from the vacancies with a bi-modal angular distribution. In addition to a major, normal to the surface component, there is a broader cosine component indicating scattering from the surface which likely also leads to photo-stimulated diffusion. Hydroxylation of VO’s does not significantly change the CO PSD yield and angular distribution, indicating that not atomic but rather electronic surface defects are involved in the site-specific PSD process. We suggest that photodesorption can be initiated by recombination of photo-generated holes with excess unpaired electrons localized near the surface point-defect (either VO or bridging hydroxyl), leading to the surface atoms rearrangement and ejection of the weakly-bound CO molecules.

Environmental Molecular Sciences Laboratory↗

Monte Carlo Simulations Probing the Adsorptive Separation of Hydrogen Sulfide/Methane Mixtures Using All-Silica Zeolites

Selective removal of hydrogen sulfide (H 2 S) from sour natural gas mixtures is one of the key challenges facing the natural gas industry. Adsorption and pervaporation processes utilizing nanoporous materials, such as zeolites, can be alternatives to highly energy-intensive amine-based absorption processes. The adsorption behavior of binary mixtures containing H 2 S and methane (CH 4 ) in seven different all-silica zeolite frameworks (CHA, DDR, FER, IFR, MFI, MOR, and MWW) is investigated using Gibbs ensemble Monte Carlo simulations at two temperatures (298 and 343 K) and pressures ranging from 1 to 50 bar. The simulations demonstrate high selectivities that, with the exception of MOR, increase with increasing H 2 S concentration due to favorable sorbate–sorbate interactions. The simulations indicate significant inaccuracies of predictions using unary adsorption data and ideal adsorbed solution theory. In addition, the adsorption of binary H 2 S/H 2 O mixtures in MFI is considered to probe whether the presence of H 2 S induces coadsorption and reduces the hydrophobic character of all-silica zeolites. The simulations show preferential adsorption of H 2 S from moist gases with a selectivity of about 18 over H 2 O.

03 NATURAL GAS↗

Adsorption and Depletion Regimes of a Nonionic Surfactant in Hydrophilic Mesopores: An Experimental and Simulation Study

Adsorption and aggregation of nonionic surfactants at oxide surfaces has been studied extensively in the past, but only for concentrations below and near the critical micelle concentration. In this paper, we report an adsorption study of a short-chain surfactant (C 6 E 3 ) in porous silica glass of different pore sizes (7.5 to 50 nm), covering a wide composition range up to 50 wt % in a temperature range from 20 °C to the LCST. Aggregative adsorption is observed at low concentrations, but the excess concentration of C 6 E 3 in the pores decreases and approaches zero at higher bulk concentrations. Strong depletion of surfactant (corresponding to enrichment of water in the pores) is observed in materials with wide pores at high bulk concentrations. We propose an explanation for the observed pore-size dependence of the azeotropic point. Mesoscale simulations based on dissipative particle dynamics (DPD) were performed to reveal the structural origin of this transition from the adsorption to the depletion regime. The simulated adsorption isotherms reproduce the behavior found in the 7.5 nm pores. Finally, the calculated bead density profiles indicate that the repulsive interaction of surfactant head groups causes a depletion of surfactant in the region around the corona of the surface micelles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxalic Acid Adsorption on Rutile: Experiments and Surface Complexation Modeling to 150 °C

Here, we characterize oxalate adsorption by rutile in NaCl media (0.03 and 0.30 m) and between pH 3 and 10 over a wide temperature range which includes the near hydrothermal regime (10–150 °C). Oxalate adsorption increases with decreasing pH (as is typical for anion binding by metal oxides), but systematic trends with respect to ionic strength or temperature are absent. Surface complexation modeling (SCM) following the CD-MUSIC formalism, and as constrained by molecular modeling simulations and IR spectroscopic results from the literature, is used to interpret the adsorption data. The molecular modeling simulations, which include molecular dynamics simulations supported by free-energy and ab initio calculations, reveal that oxalate binding is outer-sphere, albeit via strong hydrogen bonds. Conversely, previous IR spectroscopic results conclude that various types of inner-sphere complexes often predominate. SCMs constrained by both the molecular modeling results and the IR spectroscopic data were developed, and both fit the adsorption data equally well. We conjecture that the discrepancy between the molecular simulation and IR spectroscopic results is due to the nature of the rutile surfaces investigated, that is, the perfect (110) crystal faces for the molecular simulations and various rutile powders for the IR spectroscopy studies. Although the (110) surface plane is most often dominant for rutile powders, a variety of steps, kinks, and other types of surface defects are also invariably present. Hence, we speculate that surface defect sites may be primarily responsible for inner-sphere oxalate adsorption, although further study is necessary to prove or disprove this hypothesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS

The adsorption properties of CO 2 on the SrTiO 3 (001) surface were investigated using ambient pressure X-ray photoelectron spectroscopy under elevated pressure and temperature conditions. On the Nb-doped TiO 2 -enriched (1 × 1) SrTiO 3 surface, CO 2 adsorption, i.e., the formation of CO 3 surface species, occurs first at the oxygen lattice site under 10 –6 mbar CO 2 at room temperature. The interaction of CO 2 molecules with oxygen vacancies begins when the CO 2 pressure increases to 0.25 mbar. The adsorbed CO 3 species on the Nb-doped SrTiO 3 surface increases continuously as the pressure increases but starts to leave the surface as the surface temperature increases, which occurs at approximately 373 K on the defect-free surface. On the undoped TiO 2 -enriched (1 × 1) SrTiO 3 surface, CO 2 adsorption also occurs first at the lattice oxygen sites. Both the doped and undoped SrTiO 3 surfaces exhibit an enhancement of the CO 3 species with the presence of oxygen vacancies, thus indicating the important role of oxygen vacancies in CO 2 dissociation. When OH species are removed from the undoped SrTiO 3 surface, the CO 3 species begin to form under 10 –6 mbar at 573 K, thus indicating the critical role of OH in preventing CO 2 adsorption. The observed CO 2 adsorption properties of the various SrTiO 3 surfaces provide valuable information for designing SrTiO 3 -based CO 2 catalysts.

36 MATERIALS SCIENCE↗

NO x Adsorption and Optical Detection in Rare Earth Metal–Organic Frameworks

Acid gases (e.g., NO x and SO x ), commonly found in complex chemical and petrochemical streams, require material development for their selective adsorption and removal. Here, we report the NO x adsorption properties in a family of rare earth (RE) metal–organic frameworks (MOFs) materials. Fundamental understanding of the structure–property relationship of NO x adsorption in the RE-DOBDC materials platform was sought via a combined experimental and molecular modeling study. No structural change was noted following humid NO x exposure. Density functional theory (DFT) simulations indicated that H 2 O has a stronger affinity to bind with the metal center than NO 2 , while NO 2 preferentially binds with the DOBDC ligands. Further modeling results indicate no change in binding energy across the RE elements investigated. Also, stabilization of the NO 2 and H 2 O molecules following adsorption was noted, predicted to be due to hydrogen bonding between the framework ligands and the molecules and nanoconfinement within the MOF structure. This interaction also caused distinct changes in emission spectra, identified experimentally. As a result, calculations indicated that this is due to the adsorption of NO 2 molecules onto the DOBDC ligand altering the electronic transitions and the resulting photoluminescent properties, a feature that has potential applications in future sensing technologies.

36 MATERIALS SCIENCE↗

A Unified Picture of Adsorption on Transition Metals through Different Atoms

A key issue in catalyst design is understanding how adsorption energies of surface intermediates vary across both different surfaces and various types of adsorbing atoms. In this work, we examine trends in adsorption energies of a wide variety of adsorbates that attach to transition metal surfaces through different atoms (H, C, N, O, F, S, etc.). All adsorption energies, as calculated by density functional theory, have nearly identical dependence on the metal bands (the d-band center and the number of p electrons) and the adsorbates’ highest occupied molecular orbital (HOMO) energies. However, the dependence on the adsorbate-surface coupling and the d-band filling varies with the energy of the HOMO. Adsorbates with low HOMOs experience a higher level of Pauli repulsion than those with higher HOMOs. This leads to a classification of adsorbates into two groups, where adsorption energies in each group correlate. Even across the groups, adsorbates with similar HOMO energies are likely to have correlated adsorption energies.

Environmental Molecular Sciences Laboratory↗

A Combined Experimental-Computational Study on the Effect of Topology on Carbon Dioxide Adsorption in Zeolitic Imidazolate Frameworks

We report CO2 adsorption data for four zeolitic imidazolate frameworks (ZIFs) to 55 bar, namely ZIF-7, ZIF-11, ZIF-93, and ZIF-94. Modification of synthetic conditions allows access to different topologies with the same metal ion and organic link: ZIF-7 (ZIF-94) having sod topology and ZIF-11 (ZIF-93) having the rho topology. The varying topology, with fixed metal ion and imidazolate functionality, makes these systems ideal for studying the effect of topology on gas adsorption in ZIFs. The experiments show that the topologies with the smaller pores (ZIF-7 and 94) have larger adsorptions than their counterparts (ZIF-11 and 93, respectively) at low pressures (<1 bar); however, the reverse is true at higher pressures where the larger-pore structures have significantly higher adsorption. Molecular modeling and heat of adsorption measurements indicate that while the binding potential wells for the smaller-pore structures are deeper than those of the larger-pore structures, they are relatively narrow and cannot accommodate multiple CO2 occupancy, in contrast to the much broader potential wells seen in the larger pore structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 Adsorption on Anatase TiO 2 (101) Surfaces in the Presence of Subnanometer Ag/Pt Clusters: Implications for CO 2 Photoreduction

We show how CO 2 adsorption on perfect and reduced anatase TiO 2 (101) surfaces can be substantially modified by the presence of surface Ag and Pt octamer clusters, using density functional theory calculations. Furthermore, we found that adsorption was affected even at sites where the adsorbate was not in direct contact with the octamer, which we attributed to charge donation to CO 2 from the Ag/Pt-modified surface, as well as an electrostatic competition between attractive (Ti–O) and repulsive (Ti–C) interactions. Additionally, TiO 2 -supported Pt octamers offer key advantages that could be leveraged for CO 2 photoreduction, including providing additional stable adsorption sites for bent CO 2 species and facilitating charge transfer to aid in CO 2 – anion formation. Electronic structure analysis suggests these factors arise primarily from the hybridization of the bonding molecular orbitals of CO 2 with d orbitals of the Pt atoms. Our results show that, for adsorption on TiO 2 -supported Pt octamers, the O–C–O bending and C–O asymmetric stretching frequencies can be used as reliable indicators of the presence of the CO 2 – anion intermediate as well as to distinguish unique adsorption geometries or sites. Finally, we suggest a possible pathway for subsequent CO 2 dissociation to CO at the surface of a reduced anatase TiO 2 (101)-supported Pt octamer, which has a computed energy barrier of 1.01 eV.

30 DIRECT ENERGY CONVERSION↗

Emergence of local scaling relations in adsorption energies on high-entropy alloys

Alloying has been proposed to circumvent scaling relations between the adsorption energies thus allowing for the complete optimization of multistep reactions. Herein the fidelity of scaling rules on high-entropy alloy (HEA) surfaces is assessed focusing on hydrogen-containing molecules, *AH x for A = C and N (x = 0, 1, 2, 3), A = S (x = 0, 1, 2) and A = O (x = 0, 1). Using an adsorbate- and site-specific deep learning model to rapidly compute the adsorption energies on CoMoFeNiCu HEA surfaces, the energies of *AH x and *A are shown to be linearly correlated if *A and *AH x have identical adsorption site symmetry. However, a local linear dependence emerges between the configuration-averaged adsorption energies irrespective of the site symmetry. Although these correlations represent a weaker form of the scaling relationships, they are sufficient to prohibit the optimization of multistep reactions. The underpinning of this behavior is twofold (1) the nearsightedness principle and (2) the narrow distribution of the adsorption energies around the mean-field value. While the nearsightedness is general for all electronic systems, the second criterion applies in HEAs with relatively strong reactive elements. The present findings strongly suggest that alloys may not generally enable the breaking of scaling relationships.

36 MATERIALS SCIENCE↗

Modern approaches to studying gas adsorption in nanoporous carbons

Conventional approaches to understanding gas adsorption capacity of nanoporous carbons have emphasized the relationship with the effective surface area, but more recent work has demonstrated the importance of local structures and pore-size-dependent adsorption. We present some recent developments that provide new insights into local structures in nanoporous carbon and their effect on gas adsorption and uptake characteristics. Experiments and theory show that appropriately tuned pores can strongly enhance local adsorption, and that pore sizes can be used to tune adsorption characteristics. In the case of H2 adsorbed on nanostructured carbon, quasielastic and inelastic neutron scattering probes demonstrate novel quantum effects in the motion of adsorbed molecules.

Morris, James R↗

Carbon capture turned upside down: high-temperature adsorption & low-temperature desorption (HALD)

Carbon capture & sequestration (CCS) could reduce CO 2 emissions from large fossil-fuel power plants on the short term, but the high energy penalty of the process hinders its industrial deployment. Moreover, the utility of nanoporous materials, known to be selective for the CO 2 /N 2 separation, is drastically reduced due to the competitive adsorption with H 2 O. Taking advantage of the power plant's waste heat to perform CCS while at the same time surmounting the negative effect of H 2 O is therefore an attractive idea. We propose an upside-down approach for CCS in nanoporous materials, high-temperature adsorption & low-temperature desorption (HALD), that exploits the temperature-dependent competitive adsorption of CO 2 and H 2 O. First, we provide a theoretical background for this entropy-driven behavior and demonstrate under what conditions competitive adsorption can be in favor of CO 2 at high temperature and in favor of H 2 O at low temperature. Then, molecular simulations in all-silica MFI provide a proof of concept. The International Zeolite Association database is subsequently screened for potential candidates and finally, the most promising materials are selected using a post-Pareto search algorithm. The proposed post-Pareto approach is able to select the material that shows an optimal combination of multiple criteria, such as CO 2 /H 2 O selectivity, CO 2 /N 2 selectivity, CO 2 uptake and H 2 O uptake. As a conclusion, this work provides new perspectives to reduce the energy requirement for CCS and to overcome the competitive adsorption of H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct structural evidence of commensurate-to-incommensurate transition of hydrocarbon adsorption in a microporous metal organic framework

Here, the efficiency of physisorption-based separation of gas-mixtures depends on the selectivity of adsorbent which is directly linked to size, shape, polarizability and other physical properties of adsorbed molecules. Commensurate adsorption is an interesting and important adsorption phenomenon, where the adsorbed amount, location, and orientation of an adsorbate are commensurate with the crystal symmetry of the adsorbent. Understanding this phenomenon is important and beneficial as it can provide vital information about adsorbate–adsorbent interaction and adsorption–desorption mechanism. So far, only sporadic examples of commensurate adsorption have been reported in porous materials such as zeolites and metal organic frameworks (MOFs). In this work we show for the first time direct structural evidence of commensurate-to-incommensurate transition of linear hydrocarbon molecules (C 2 –C7) in a microporous MOF, by employing a number of analytical techniques including single crystal X-ray diffraction (SCXRD), in situ powder X-ray diffraction coupled with differential scanning calorimetry (PXRD-DSC), gas adsorption and molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗