Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “zirconium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

NASA: Structure and Thermophysical Properties of Delta and Epsilon Zry4H x

Small-modular and micro-reactors are part of an emerging nuclear technology aimed to provide power to decentralized grids in civilian, industrial, and defense energy sectors. Resurgence in microreactor research is partly driven by demands for a mobile, safe, and compact energy platform for remote and strategic locations. The defining characteristics of the microreactor include its high-power density on a small footprint, its highly transportable design, and the use of high-assay low-enriched uranium (HALEU) fuel. Solid-state metal hydride neutron moderator components are considered for microreactor designs where the moderator functions to thermalize neutrons into lower energies for the fuel to achieve high fission rates. Zirconium hydride (ZrH x where x denotes the atomic hydrogen-to-metal ratio) is a leading moderator candidate material due to the combination of its low neutron absorption cross section, irradiation resistance, high hydrogen atomic density (upwards of 7.5 x 10 22 H atoms/cm 3 at low temperatures), and high hydrogen desorption (dissociation) temperature around 600 °C (873 K) compared to other metal hydrides. Its high-temperature stability enables operation of fuel temperatures into several hundred degrees Celsius for overall increased efficiency.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New dynamic diamond anvil cell for time-resolved radial x-ray diffraction

The dynamic diamond anvil cell (dDAC) is a recently developed experimental platform that has shown promise for studying the behavior of materials at strain rates ranging from intermediate to quasi-static and shock compression regimes. Combining dDAC with time-resolved x-ray diffraction (XRD) in the radial geometry (i.e., with incident x-rays perpendicular to the axis of compression) enables the study of material properties such as strength, texture evolution, and deformation mechanisms. This work describes a radial XRD dDAC setup at beamline P02.2 (Extreme Conditions Beamline) at DESY’s PETRA III synchrotron. Time-resolved radial XRD data are collected for titanium, zirconium, and zircon samples, demonstrating the ability to study the strength and texture of materials at compression rates above 300 GPa/s. In addition, the simultaneous optical imaging of the DAC sample chamber is demonstrated. The ability to conduct simultaneous radial XRD and optical imaging provides the opportunity to characterize plastic strain and deviatoric strain rates in the DAC at intermediate rates, exploring the strength and deformation mechanisms of materials in this regime.

47 OTHER INSTRUMENTATION↗

Bench-Scale Electrolytic Dissolution of Quarter-Scale FCA Cans

In 2016, the Savannah River National Laboratory (SRNL) led, in support of and under sponsorship of the Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Office of Material Management and Minimization (M3), the removal and transfer of the plutonium based Fast Critical Assembly (FCA) fuel from the Japan Atomic Energy Agency (JAEA) Tokai facility to the Savannah River Site (SRS). The team also included JAEA, multiple organizations in Savannah River Nuclear Solutions (SRNS), International Nuclear Services, and many other entities. The FCA fuel removal project completion was a key deliverable for M3 to the 2016 Nuclear Security Summit and constituted the largest inventory of weapons-usable plutonium removed under the nonproliferation program. The FCA materials consist of thousands of stainless steel (SS) clad plates and hundreds of SS clad rods. The FCA fuel elements were packaged in a carrier can and stored at SRS pending disposition of the fuel. Following an assessment of candidate disposition options, SRNS identified electrolytic dissolution (ED) as the most promising disposition option for the FCA plates and their preferred option was endorsed by DOE. This option entails electrochemically dissolving the entire FCA carrier can with fuel elements and was based on bench-scale laboratory testing and historical work on processing SS-clad and zirconium-clad uranium-based fuel in the H-Canyon electrolytic dissolver (last operated in 1980). The FCA plate consists of a plutonium-aluminum metal alloy core hermitically sealed in SS cladding.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Irradiation of Mo-100 Targets and Testing Fe(ll)CI 2 Precipitation for Tc-99 Removal

The production of molybdenum-99 (Mo-99) is a critical step in the generation of technetium-99m (Tc-99m), a radioisotope widely used in medical imaging. NorthStar Medical Radioisotopes, LLC is planning to produce the important medical radioisotope Mo-99 through a photonuclear reaction on molybdenum-100 (Mo-100). Accelerator production of Mo-99 using enriched Mo-100 targets yields undesirable isotopes, such as niobium-95 (Nb-95) and zirconium-95 (Zr-95). Previous studies reported that Nb and Zr isotopes can be effectively removed from Mo-99 products through coprecipitation with Fe(III). To enable the potential utilization of the first milking of Tc-99m from a Mo-99/Tc-99m generator, it is desirable to remove long-lived Tc-99. This can be accomplished by substituting Fe(III) with Fe(II) during the precipitation step, without affecting the removal of Zr and Nb isotopes. Previous experiments demonstrated up to 99+% removal of Tc using this method. It was also observed that the presence of hydrogen peroxide significantly impacts Tc removal. This was evident in the processing of enriched Mo-100 targets, where only 25% of Tc was removed. To further investigate this, another irradiation of enriched Mo-100 disks was conducted, followed by Tc-99 removal using Fe(II). Prior to irradiation, experimental conditions for Tc removal were optimized through several test runs using Mo-100 disks spiked with Tc-99. The results of these tests are discussed in this report.

07 ISOTOPE AND RADIATION SOURCES↗

Analysis of the Surface Morphology and Chemical Composition of Zr-Nb3Sn Alloys with Zr Different Concentrations

The inclusion of zirconium (Zr) in niobium-tin (Nb3Sn) significantly enhances the performance of Nb3Sn radiofrequency cavities in high magnetic fields. This research project is dedicated to characterizing the surface properties and chemical composition of Zr-doped Nb3Sn. Two different concentrations of Zr were used for doping: approximately 0.5% and 24%. Various spectroscopy techniques were employed to analyze how the surface morphology and chemical composition of Nb3Sn change with increasing Zr content. The findings of this study indicate that the grain size decreases as the Zr concentration increases. In samples with 24% Zr, nanometer-sized particles, likely oxides, were observed. X-ray photoelectron spectroscopy (XPS) data revealed that the thickness of niobium oxides (NbOx) decreases with increasing Zr, while the thickness of tin oxides (SnOx) increases. Additionally, grain size distribution analysis showed that the average grain size is around 5300 nm , with a grain area density of about 165 grains/μm .

Sue, Micah↗

Development of Refractory Alloys and Refractory Coatings for Advanced Nuclear Reactors

The next generation of nuclear reactors will benefit from materials that enable operation at higher temperatures (>500°C), higher irradiation doses (up to 200 displacements per atom (dpa)), and the use of more corrosive and reactive coolants. This work package represents the first experimental steps towards a longer-term effort to develop refractory materials for nuclear energy applications which will enable operation under these conditions. Specifically, this work package focuses on additive manufacturing of refractories as both a refractory liner coating deposited onto the interior surface of a metallic tubular backbone and as bulk refractory alloys. During fiscal year 23 (FY23), several refractory metal coating systems and bulk alloys were examined and selected using a decision criteria matrix. The refractory metal coating systems included molybdenum, tungsten, and zirconium as refractory coatings on backbones of either carbon-carbon (C/C) or silicon carbide-silicon carbide (SiC/SiC) ceramic matrix composites. The bulk refractory alloys included C-103, WTa, and WNiFe as bulk alloys. During FY24 additional bulk refractory alloys and metallic backbones were evaluated using the decision criteria matrix based on input from the AMMT leadership team. These included 316 SS and 316H SS for the metallic backbones and Mo-La, Ta, and Nb1Zr as bulk refractory alloys. The primary focus for the FY24 effort was placed on establishing the capabilities to deposit refractory coatings based on the results of the scoring in the decision criteria matrix and finalizing the additively manufactured TZM studies which were incorporated into the AMMT program from the microreactor program. Further efforts were dedicated to establishing the capabilities to additively manufacture down-selected bulk refractory alloys.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Iron-Chromium-Aluminum Accident Tolerant Fuel Concept Source Term Accident Sequence Analysis - High Burnup Fuel Source Term Accident Sequence Analysis Supplement

To extend NUREG-1465 and high burnup fuel source term (SAND2023-01313) recommendations, representative radiological releases to containment – patterned after NUREG-1465 – have been evaluated for LWRs utilizing iron-chromium-aluminum (FeCrAl) alloys in place of zirconium-based alloys in major core structures (cladding and fuel canisters) and high burnup fuel with enrichments of 8% and 10% for PWRs and BWRs, respectively. Representative radionuclide releases are generated for this accident tolerant fuel concept by applying non-parametric bootstrap methods to MELCOR simulation results. Accident scenarios considered in this analysis include principle contributors to historical core damage frequency estimates for a range of nuclear reactor technologies representative of the operating U.S.A. fleet of nuclear reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rare Earth Elements (REE) and Critical Minerals (CM) in Middle Pennsylvanian-Age Coals and Associated Sediments in the Central Appalachian Basin, Eastern U.S.A.

The Central Appalachian Basin (CAB) of Kentucky, Tennessee, West Virginia and Virginia has a long history of coal mining and oil and gas extraction that has empowered the regional and national economies, the development of infrastructure, and a highly trained energy resources work force. As our societal demands for advanced technologies have rapidly increased in recent years, coal-related materials are viewed as an important new unconventional domestic source of critical minerals (CM) that are required for telecommunications, aerospace and transportation industries, electronics, the transition to low-carbon emissions energy production, and many consumer products. Coal-related materials encompass coal, associated sediments, coal mining waste materials, produced waters, and ash residues from coal-fired power plants. An important objective of the Evolve Central Appalachia Project (Evolve CAPP), sponsored by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) is to assess the quantity and distribution of CM resources in the CAB region. The rare earth elements (REE) are considered highest priority, although other important CM such as niobium, gallium, and zirconium are known to occur in the Middle Pennsylvanian-age coals and sediments. Working with coal industry partners who provided access to drill cores, coal-related sediments and waste materials, over 600 samples have been collected for laboratory analysis, and over 730 materials have been scanned using portable x-ray fluorescence (pXRF) equipment. The application of pXRF provides the means for real-time semiquantitative analysis of CM content at very close spacings (typically 2-3 inch intervals) along drill core and in-situ channel samples that span the roof, coal seam, and floor rock. The comparison of pXRF geochemical data with laboratory results, geologic data, and downhole spectral gamma logs can provide high resolution input to lithologic and depositional models for future CM resource evaluations. The preliminary findings show that pXRF is capable of accurately measuring low concentrations of many of the CM with a high level of confidence (Ba, Cr, Ga, K, Nb, Rb, Sr, Th, Y), whereas for others (La, Ce, Co, Mn, Nd, Ni, Sc, Ti, V) the detection limits are very high or spectral interferences increase the uncertainty. Notably, the mean abundances of Y (34 ppm), La (86 ppm), Ga (40 ppm), and V (146 ppm) in coal underclays in the CAB region are up to 7X enriched compared with the overlying coal. These values also exceed the reported concentrations in published reference materials for upper continental crustal rocks (Rudnick and Gao, 2003), North American Shale Composite (Gromet et al., 1984), and North American coal (Finkelman, 1993). The pXRF data are in part verified by laboratory results that indicate the mean Y abundance (36 ppm) is highly correlated (R2 = 0.807) with total REE (ΣREE). The correlation is even higher (R2 = 0.957) with heavy REE (ΣHREE). Applying these correlations to the pXRF data for the coal underclays, the mean estimated values for ΣREE+Y and ΣHREE+Y are 270 ppm and 58 ppm, respectively. Although these average values are not considered high, the range of Y measured by pXRF in the coal underclays extended as high as 114 ppm, which would suggest ΣREE+Y equal to 847 ppm. The mean abundances of Zr (192 ppm) and Th (21 ppm) in coal underclays are also enriched compared with the overlying coal and these results likely reflect the presence of resistant detrital heavy minerals such as monazite, xenotime, and zircon in the underclay matrix. Several of the profiled coal seams and associated wall rocks contained thin volcanic ash layers up to 4-5 inches in thickness. The extent to which these ash fall layers provided a source for CM under the paleoenvironmental conditions that resulted in coal deposits in the CAB remains to be fully studied. Continuing investigations in the Evolve CAPP study area will include laboratory determinations of mineralogic and clay compositions, and evaluations of CM geochemical mobility in the coal and coal underclays.

Lassetter, Billy↗

Draft Critical Minerals Evaluation Report: Advanced Materials and Manufacturing Technology

Future energy production by sustainable clean energy technologies will be influenced by the availability and projected supply risks of critical minerals. In this report we discuss this context from the perspective of a sustainable nuclear energy technology and the benefits from the deployment of advanced manufacturing. In the past, the demand of critical minerals in the energy sector was minor, but in recent years renewable energy systems do force a substantial increase in the requirements for critical minerals which further induces pressure on the supply of critical minerals such as chromium, cobalt, nickel, niobium, tantalum, titanium, tungsten, vanadium, and zirconium for nuclear energy technology. The demand of critical minerals for nuclear technology is, besides beryllium and hafnium, minor and less than 1 % of the world supply. This alleviates the negative impact as the nuclear industry may not be able to provide the most compelling priority for the suppliers and to other policymakers looking at the overall needs. In this draft report, detailed background information is provided on the mineralogy of the identified critical minerals, supply chain risks followed by the discussion of specific minerals applicable to material relevant to nuclear energy technology. Briefly, the impact of advanced manufacturing on savings of critical minerals and electric energy is discussed and its effect to nuclear energy technology evaluated. This report will be followed with a final report providing a strategic vision for executable actions to implement the savings through advanced manufacturing, which will be further explored in the upcoming months. The Gen-IV relevant critical minerals will also be evaluated in the context of the AMMT programs material priorities as identified in the material score cards, to determine priorities for future actions. Material savings will become even more substantial when commercial Gen-IV reactor technology becomes available because of their needs for structural materials with higher content in alloying elements for enhanced high-temperature properties and improved corrosion resistance. The requirement for critical minerals in nuclear technology (in kg/MWe) will therefore significantly increase by 2050, even though its contribution to the worldwide electric energy production capacity will remain at about 5 %. The share of nuclear on world’s electric energy production is, on grounds of high utilization and availability 10.2 % and is expected to increase to 12 % by 2050. Advanced manufacturing could aid the deployment of Gen-IV nuclear technology since critical materials savings of up to 30 % seems possible, promoting nuclear energy as a true sustainable clean energy technology together with hydroelectric power.

36 MATERIALS SCIENCE↗

ATF-2 Ramp Conceptual Design Report

The following report documents the conceptual design for the ATF-2 Ramp experiment. The experiment aims to fill the in-pile irradiation testing gap to conduct integral ramp testing, which was created by the closure of R2, Osiris, and Halden test reactors. The concept involves the simultaneous ramping of three fuel pins using a power axial locator mechanism in the Loop-2A testing facility in the center flux trap of the advanced test reactor (ATR). The three fuel pins are ramped in individual coolant channels containing a prototypic PWR environment. Rod failure will be detected using a fuel rod elongation sensor attached to the fuel pin upper end cap. An axial stack of concentric hafnium and zirconium shrouds will be used to shape the flux around the test pins to create different power levels in each pin and to ensure the peak power location of each pin remains in the center of the test rod. Monte Carlo simulations are used to demonstrate the viability of this design concept.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Strategic Plan: Decrease Critical Minerals Waste Through Enabling Advanced Manufacturing Techniques

In this report we developed a strategic outlook derived from previous findings by our Phase-2 Scorecard Report and the Critical Mineral Evaluation Report. In addition, Phase 2 Materials Scorecards have been developed in 2022 to provide a detailed justification and traceability for the adoption of additively manufactured structural materials and ceramics for nuclear deployment. The report provides a strategic vision to harvest the benefits of reduced material and energy demands by enhanced deployment of advanced manufacturing in nuclear technology. The objective of this report is to address the needs for imminent experimental/computational studies to optimize the deployment of advanced manufacturing for its energy-, cost-, and critical materials saving potentials. We display what further actions are needed to minimize supply risks of critical minerals and to lower the economic vulnerability when implementing the additional nuclear capacity projected by 2050, in support of the U.S. goal of net-zero carbon emission. The critical minerals essential for Gen-IV nuclear technology show either low disruption potential (supply risks) combined with high economic vulnerability, such as: copper, nickel, and chromium; or low supply risks combined with medium economic vulnerability, such as: manganese, molybdenum, tungsten, vanadium, tantalum, and zirconium. Enhancements in quality and yield of critical mineral recycling and the recovery of critical minerals from solid and industrial waste streams are needed to enhance supply security for stainless-steel production and to shift the time to scarcity for society to future years.

36 MATERIALS SCIENCE↗

Coupling between collective modes in the deformed 98 Zr nucleus: Insights from consistent HFB+QRPA calculations with the Gogny interaction

The Zirconium isotopes exhibit structural properties that present multiple challenges to nuclear theory. Investigations of the coupling present within isoscalar modes and within isovector modes are scarce but important for advancing our understanding of the microscopic picture of nuclei. To explore some of these underlying coupling features, and to test the predictive power of a state-of the-art nuclear structure approach, we provide a detailed analysis of the properties of 90,96,98Zr. This region includes a benchmarking case and offers insights into nuclear deformation phenomena. To investigate the coupling between collective modes in deformed nuclei, we focused our analysis on the ground and excited-state properties of these isotopes, employing a consistent approach with the axially-symmetric deformed Hartree-Fock-Bogoliubov (HFB) and the Quasiparticle Random Phase Approximation (QRPA) framework, both using the Gogny D1M force. This approach effectively describes both low-lying and giant-resonance states. We devoted special attention to the deformed 98Zr nucleus, where we confirm the existence of coupling between monopole and quadrupole excitations through the K π = 0 + QRPA components and demonstrate an analogous dipole-octupole coupling through the K π = 0 − and K π = 1 − components. Intrinsic transition densities and associ ated radial projections illustrate the coupling. Our work complements and extends earlier studies carried out using density-functional-based methods and notably, we included the complete Coulomb interaction also in the pairing fields, i.e. we treat terms exactly that are approximated in typical calculations that use the Gogny D1 and D2 interaction families.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Benchmark Gap Assessment for the Manufacturing of High-Assay Low-Enriched Uranium Fuels

This document develops basic critical conditions for spheres—moderated and unmoderated, as well as reflected and unreflected—in consideration of nuclear criticality safety of a potential fuel production facility producing high-assay low-enriched uranium (HALEU) fuel of several different types like tristructural-isotropic (TRISO), uranium metal and alloys, oxide and non-metallic forms. In addition to spherical arrangements, TRISO particle manufacturing process–specific equipment is modeled as it would be for the criticality safety analysis. The objective is to develop representative systems that can then be used for comparison with existing benchmarks. SCALE/TSUNAMI is used to assess the similarity index between these systems to assess validation gaps for possible fuel production applications of proposed advanced reactors. Several different fuel types were evaluated, including TRISO, uranium metal, uranium molybdenum, uranium zirconium, uranium dioxide, uranium nitride, uranium hydride, U-ZrH, and uranium chloride. This selection of fuel types covers a breadth of proposed reactor types, as well as intermediate steps in the production and fabrication of the fuel

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

UHT-CAMANCHE: Ultra-High Temperature Ceramic Additively Manufactured Compact Heat Exchangers

The conceptual basis for this project is the convergence of advanced ultra-high temperature ceramic materials and additive manufacturing technologies to produce compact ceramic heat exchangers with complex internal flow path geometries. Task areas were broadly divided into materials and manufacturing development, heat exchanger design, component testing, and techno-economic analysis. Technical challenges included the design and commissioning of new test facilities, improving feature resolution and deposition rate of ceramic additive manufacturing techniques, establishing process-structure-property relationships in additively manufactured ultra-high temperature ceramics, and assessing high temperature materials compatibility in CO 2 environments. The primary candidate material evaluated in this work is a composite comprising zirconium diboride (ZrB2) with 30 vol. % silicon carbide (SiC) which was selected based on its desirable combination of high temperature mechanical properties, high thermal and electrical conductivities, and oxidation resistance. High solids loaded ZrB2-SiC pastes suitable for extrusion-based additive manufacturing were developed for the first time as part of this work. Materials compatibility studies indicate this material oxidizes in CO 2 to form a protective borosilicate scale which transforms to pure silica above 1000°C. Parts made by additive manufacturing displayed enlarged grain sizes produced by pressureless sintering as compared to hot-press sintering. Increases in microstructural coarseness have outsized effect on oxidation performance up to 1400°C due to incomplete oxidation of coarse large diameter SiC particles resulting in lower amounts of silica that apparently inhibit protective scale formation. Additive manufacturing as a forming technique did not appear to significantly affect thermal conductivity, hardness, or elastic modulus, though flexural strength was reduced by half or more as compared to traditionally hot-pressed materials. This effect was attributed to the presence of strength-limiting flaws (ca. 40 microns in size) originating from extrudate inhomogeneities that could potentially be eliminated with further process improvements. Attempts to attain economies of scale for production of multi-kilowatt scale heat exchangers by ceramic additive manufacturing proved difficult. Lack of automation and a modest extrusion rate while retaining fine feature resolution made the overall process labor intensive and limited experimental throughput. A number of full-scale components were taken through post-process heat treatments including drying, binder burnout, and sintering; however, none survived without significant flaws or cracks. Therefore, no operational data from a newly installed heat exchanger test loop were able to be obtained during the performance period. Continued research and development is recommended to improve economic feasibility of ceramic additive manufacturing by standardizing the use of advanced sensors, artificial intelligence, and automation tools to reduce associated labor costs and accelerate production rates. The materials and manufacturing techniques demonstrated in this work are likely to find applications in defense and energy applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced Moderator Material Handbook (FY25)

High hydrogen density moderators such as metal hydrides are an important research topic within the DOE NE Microreactor Program due to their ability to retain hydrogen to much higher temper atures than other hydrogenous media. This class of moderators, which includes yttrium dihydride (δ-YH 2 ) and zirconium hydride (δ-ZrH 1.6 or ϵ-ZrH 1.8 ), thermalizes neutrons in the system such that the overall fuel mass or the required uranium enrichment in the system can be significantly reduced. Knowledge of material properties, both in the as-fabricated and irradiated state, are important to understanding moderator performance during steady-state and transient reactor operation.

36 MATERIALS SCIENCE↗

High Burnup Transient Fission Gas Release Testing and Post-Test Examinations

The contribution of transient fission gas release (tFGR) to the burst behavior of high burnup fuel during a loss of coolant accident (LOCA) for commercial light water reactors is a complex phenomenon that is not fully understood. During the temperature ramp associated with a LOCA, there is significant additional transient fission gas release in excess of the steady state fission gas release from normal operation. An addition to the Oak Ridge National Laboratory Severe Accident Test Station (SATS) was created to explore the different conditions that impact transient fission gas release. Four tests on commercially irradiated zirconium clad uranium dioxide nuclear fuel were performed to support transient fission gas release study. These experiments and their post-test analyses are discussed. The first test on high burnup fuel revealed a LOCA relevant transient fission gas release of 5.3% for an unpressurised segment. Subsequent tests have measured transient fission gas release at different conditions that span from 4.8% to 14.4 % transient fission gas release.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Destructive Analysis of TRISO Particles: Crush/Burn/Leach Followed by Davies-Gray Titration and IDMS

The accurate accounting of nuclear materials is a cornerstone of international nuclear safeguards. One emerging challenge in this domain is the fabrication of TRIstructural ISOtropic (TRISO) particle fuels. Although these innovative fuel forms are critical for advanced reactor applications, their robust refractory ceramics and coating compositions present significant obstacles to destructive analysis (DA) methods. Ensuring full and quantitative recovery from these particles is essential for accurate mass accountancy. The current study was initiated to address these challenges, first by validating a previously established destructive method developed by Oak Ridge National Laboratory (ORNL) for the quantitative recovery of uranium from TRISO particles and then following that process with uranium content determination through isotope dilution mass spectrometry (IDMS) and Davies-Gray titration. This study expands on the scope of a digestive method that was developed under the Advanced Gas Reactor Fuel Development and Qualification program and is currently implemented in both the Coated Particle Fuel Development Laboratory and Irradiated Fuels Examination Laboratory at ORNL. The success of the previous Advanced Gas Reactor work relied on developing a DA method to evaluate the fabrication process and reactor experiments. The methodology described in this report was designed to rigorously investigate the efficacy of the crush/burn/leach sample preparation of TRISO particles; it aims to quantify uranium recovery while also assessing the effects of TRISO constituents (e.g., silicon and zirconium) on analytical precision and accuracy. By comparing the results from the titration method and IDMS, we sought to determine whether existing analytical procedures accepted by the International Atomic Energy Agency (IAEA) could be effectively translated to TRISO fuel forms. The team employed an approach that involved processing replicate TRISO samples, optimizing the milling (i.e., crushing) step and performing serial leaches. The elemental composition of the analytical samples was examined to prepare for interference studies in the second year of this project. The integration of gamma spectrometry to verify residual uranium activity further strengthened the validation. Statistical methods were applied to the collected data to evaluate the uncertainties arising from sampling, sample preparation and uranium quantification. These uncertainties were then compared to the IAEA’s international target values (ITVs). Additional data collected in upcoming project work will strengthen the uncertainty estimates. Ultimately, it is hoped that this project will contribute materially to the body of work related to characterization of TRISO based fuels for the purpose of material accountancy and its applications to international safeguards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Compositing and Characterization of SE Quadrant Waste Exemplars

This report outlines the experimental investigation and characterization of transport properties in Hanford SE quadrant High-Level Waste (HLW). The goal of the study was to establish baseline behaviors of bulk composite rheology and settling characteristics to facilitate waste treatment process design for the Waste Treatment and Immobilization Plant (WTP) and avoid waste conditions and properties favorable to bubble cascade gas release events. The study focused on two major objectives: 1) identifying, obtaining, and preparing relevant Hanford tank waste samples for evaluation and 2) quantifying the “as-received” rheology and transport properties of the samples. Twenty-three centrifuged core segments originating from tanks AN-101, AN-106, and AW-105 were selected based on compositional relevance to SE quadrant PUREX cladding waste. These materials were composited into five waste composites enriched with target analytes: aluminum (Al), iron (Fe), phosphate (PO 4 ), uranium (U), and zirconium (Zr). Physical property and transport testing examined particle size distributions, bulk densities, settling behaviors, rheological properties, shear strengths, and just-suspended mixing speeds (NJS). Testing revealed two distinct composite classifications based on rheological characteristics: non-Newtonian composites (Fe and PO 4 ) and Newtonian composites (Al, U, and Zr). The Fe and PO 4 composites exhibited slow settling rates and reduced mobilization proclivity, attributable to strong particle-particle interactions and the formation of yield structures within non-Newtonian slurries. In contrast, the Al, U, and Zr composites displayed rapid settling and dense compaction behaviors, indicative of minimal structuring and interactions. Shear strengths for all composites were generally low relative to prior studies of SE quadrant waste, with only the U composite showing elevated strength approaching values reported in previous literature. Repeat shear strength measurements revealed contributions from dense granular material in the U composite and stronger cohesive properties in the Al composite. Settling data highlighted hindered settling behavior, with rates falling more than one order of magnitude below estimates based on Stokes’ law and rate decreasing as composite UDS content increased. NJS testing demonstrated different mobilization behaviors between cohesive and granular composites. The Fe composite required the highest mixing rate for resuspension, while the Al composite was the easiest to resuspend. Comparison of measured NJS against predictions made using the Zwietering correlation suggests non-Newtonian behavior alters resuspension mechanics, rendering non-Newtonian systems more stable against resuspension lift forces relative to their granular counterparts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗