Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Evaluation of the Williams-type spring wheat model in North Dakota and Minnesota

The Williams type model, developed similarly to previous models of C.V.D. Williams, uses monthly temperature and precipitation data as well as soil and topological variables to predict the yield of the spring wheat crop. The models are statistically developed using the regression technique. Eight model characteristics are examined in the evaluation of the model. Evaluation is at the crop reporting district level, the state level and for the entire region. A ten year bootstrap test was the basis of the statistical evaluation. The accuracy and current indication of modeled yield reliability could show improvement. There is great variability in the bias measured over the districts, but there is a slight overall positive bias. The model estimates for the east central crop reporting district in Minnesota are not accurate. The estimate of yield for 1974 were inaccurate for all of the models.

Leduc, S.↗

Comparison of visualized turbine endwall secondary flows and measured heat transfer patterns

Various flow visualization techniques were used to define the secondary flows near the endwall in a large heat transfer data. A comparison of the visualized flow patterns and the measured Stanton number distribution was made for cases where the inlet Reynolds number and exit Mach number were matched. Flows were visualized by using neutrally buoyant helium-filled soap bubbles, by using smoke from oil soaked cigars, and by a few techniques using permanent marker pen ink dots and synthetic wintergreen oil. Details of the horseshoe vortex and secondary flows can be directly compared with heat transfer distribution. Near the cascade entrance there is an obvious correlation between the two sets of data, but well into the passage the effect of secondary flow is not as obvious.

Gaugler, R. E.↗

Prediction of high speed propeller flow fields using a three-dimensional Euler analysis

To overcome the limitations of classical propeller theory, a computer program, NASPROP-E, was developed which solves for the flow field surrounding a multibladed propeller and axisymmetric nacelle combination using a finite difference method. The governing equations are the three dimensional unsteady Euler equations written in a cylindrical coordinate system. They are marched in time until a steady state solution is obtained. The Euler equations require no special treatment to model the blade work vorticity. The equations are solved using an implicit approximate factorization method. Numerical results are presented which have greatly increased the understanding of high speed propeller flow fields. Numerical results for swirl angle downstream of the propeller and propeller power coefficient are higher than experimental results. The radial variation of coefficient are higher than experimental results. The radial variation of swirl angle, however, is in reasonable agreement with the experimental results. The predicted variation of power coefficient with blade angle agrees very well with data.

Bober, L. J.↗

LANDSAT-D data format control book. Volume 6, appendix A: Partially processed thematic mapper High Density Tape (HDT-AT)

One of the outputs of the data management system being developed to provide a variety of standard image products from the thematic mapper and the multispectral band scanners on LANDSAT 4, is the partially processed TM data (radiometric corrections applied and geometric correction matrices for two projections appended) which is recorded on a 28-track high density tape. Specifications are presented for the format of the recorded data as well as for the time code and the major and minor frames of the tape. Major frame types, formats, and field definitions are included.

Jai, A.↗

Evaluation of LANDSAT-4 TM and MSS ground geometry performance without ground control

Techniques and software developed to characterize the Washington, D.C. scene were improved and are being systematically applied to an Imperial Valley, CA scene. Digital elevation files are being acquired. One hundred seventy-two tiepoints were located in the Imperial Valley scene. They were digitized from USGS maps to determine their lat-long coordinates. A least squares fit is currently being performed between line-sample image data and the lat-long positions of the tiepoints. Thematic mapper scanner sweeps were determined for the Imperial Valley P-data. VICAR jobs are currently under way to analyze sample-direction offsets between sweeps in the data, as well as band to band registration offsets. Tiepoint location is about to begin in the Harrisburg, PA scene.

Bryant, N. A.↗

A model of the excitation of large scale fluctuations in a shear layer

The acoustical excitation of instability waves in free shear layers is investigated theoretically and experimentally. A configuration with a thin shear layer leaving from a semi-infinite plate is considered. The excitation by sound sources in various locations, e.g., far away from the trailing edge or very near the edge lip, is analyzed. The influence of additional walls (like those in a channel) is also predicted. The theory is extended to include two streams on both sides of the shear layer having different velocities and densities. A reference quantity for the artificial excitation is suggested. The experimental data compare well with the theory. The theory does not contain any empirical constants.

Bechert, D. W.↗

Approaches to detection of geochemical stress in vegetation

Work has been carried out to elucidate fundamental relationships between spectral properties of plants and geochemical stress, and a programme of field and laboratory work is in progress. The most significant results and conclusions at this stage are described and attention is focused on the new concepts for stress detection which have been generated. The applications of the research are relevant to the understanding of current remotely sensed data as well as relating to ideas for new instrumentation.

Horler, D. N. H.↗

Laser-induced fluorescence technique for velocity field measurements in subsonic gas flows

A nonintrusive optical technique is reported for multiple-point velocity measurements in subsonic flows. The technique is based on the detection of fluorescence from a Doppler-shifted absorption line of seeded iodine molecules excited at a laser frequency fixed in the wing of the line. Counterpropagating laser sheets are used to illuminate the flow, in the present case a nitrogen round jet, thereby eliminating the need for an unshifted reference signal. The fluorescence is detected simultaneously at 10,000 points in a plane of the flow using a 100 x 100 element photodiode-array camera. The velocity at each point is computed from four successive camera frames, each recorded with a different beam direction. The measured mean velocities between 5 and 50 m/sec agree well with data from the literature.

Hiller, B.↗

Radar scatterometry of sand dunes and lava flows

Four frequency like polarized scatterometer data over a sand dune field and a volcanic field were analyzed to understand the scattering characteristics of these two terrain types as a function of frequency and incidence angle. For the frequency range studied (400 MHz to 13.3 GHz) unvegetated sand dunes are specular reflectors that return an echo to the radar antenna particularly when the geometry is such that the dune slope is nearly perpendicular to the antenna. Vegetation on the dunes can cause significant backscatter. Lava flows are strong diffuse scatterers which have backscatter values similar to coniferous forest at certain frequencies. Different observation frequencies are required for different situations. The scatterometer data correlate well with radar images.

Blom, R.↗

Studies of flows through N-sequential orifices

Critical mass flux and axial pressure profile data for fluid nitrogen are presented for N = 20, 15, 10, and 7 N-sequential-orifice-inlet configurations uniformly spaced at 15.5 cm. These data correlate well over a wide range in reduced temperature and reduced pressure, and are in general agreement with previous studies of one to four inlets. Experimental and theoretical agreement is good for liquid and gas critical mass flux, but inconclusive in the near thermodynamic critical regions.

Hendricks, R. C.↗

Equation for Electrolyte Viscosity

Equation agrees with measurements over wide concentration range. Plot of calculated values from equation and measured values show close match except at extremely low concentrations of electrolyte. Other equations do not match data as well and limited to dilute solutions.

Fedors, R. F.↗

Intercenter Problem Reporting and Corrective Action System (PRACAS)

The Kennedy Space Center is transforming the PRACA bath automatic data processing (ADP) system of today into a fully integrated data base with on-line update and retrieval capabilities. The present manual system of reporting (Datafax, mail, and telephone) to the off-site design and engineering organizations is to be replaced by direct access to the most current information as it accrues at KSC or VAFB. Two major goals of the Intercenter PRACA are to provide a single data depository for both launch sites and to fully integrate the problem data with engineering data as well as other relevant information. The resulting ADP system can provide a closed loop system for problem reporting, corrective action and recurrence control that should serve the engineering community as well as reliability and quality assurance at the launch sites, KSC and VAFB, and at the design centers, JSC and MSFC.

Brock, G. H.↗

Observing ocean-atmosphere exchanges with space-borne sensors, appendix C

At present, space-borne sensors cannot give accurate measurements of net longwave radiation and sensible heat flux at ocean surface. The variability of ocean surface net insolation was successfully estimated from observations using geostationary satellites. Global coverages of the low frequency variation of major atmosphere-ocean exchanges, momentum, latent heat, and insolation are within reach. Data from research and defense satellites should be made available in useful form to the user community. High quality in-situ measurements are required to calibrate space-borne sensors and numerical models are needed to integrate satellite and in-situ data as well as interpolate both in space and time. Techniques that can resolve boundary layer parameters should be developed.

Liu, W. T.↗

Nickel-iron battery system safety

The generated flow rates of gaseous hydrogen and gaseous oxygen from an electrical vehicle nickel-iron battery system were determined and used to evaluate the flame quenching capabilities of several candidate devices to prevent flame propagation within batteries having central watering/venting systems. The battery generated hydrogen and oxygen gases were measured for a complete charge and discharge cycle. The data correlates well with accepted theory during strong overcharge conditions indicating that the measurements are valid for other portions of the cycle. Tests confirm that the gas mixture in the cells is always flammable regardless of the battery status. The literature indicated that a conventional flame arrestor would not be effective over the broad spectrum of gassing conditions presented by a nickel-iron battery. Four different types of protective devices were evaluated. A foam-metal arrestor design was successful in quenching gaseous hydrogen and gaseous oxygen flames, however; the application of this flame arrestor to individual cell or module protection in a battery is problematic. A possible rearrangement of the watering/venting system to accept the partial protection of simple one-way valves is presented which, in combination with the successful foam-metal arrestor as main vent protection, could result in a significant improvement in battery protection.

Saltat, R. C.↗

Estimation of delays and other parameters in nonlinear functional differential equations

A spline-based approximation scheme for nonlinear nonautonomous delay differential equations is discussed. Convergence results (using dissipative type estimates on the underlying nonlinear operators) are given in the context of parameter estimation problems which include estimation of multiple delays and initial data as well as the usual coefficient-type parameters. A brief summary of some of the related numerical findings is also given.

Banks, H. T.↗

Digital TV tri-state delta modulation system for Space Shuttle ku-band downlink

A tri-state delta modulation/demodulation (TSDM) technique which provides for efficient run-length coding of constant-intensity segments of a TV picture is described. Aspects of the hardware implementation of a high-speed TSDM transmitter and receiver for black-and-white TV or field-sequential color or NTSC format color are reviewed. Run-length encoding of the TSDM output can consistently reduce the required channel data rate well below one bit per sample. As compared with a bistate delta modulation system, the present technique eliminates granularity in the reconstructed video without degrading rise or fall times. About 40 chips are used by TSDM when used to handle the luminance information in a color link. A possible overall space and ground functional configuration to accommodate Shuttle digital TV with scrambling for privacy is presented.

Udalov, S.↗

Comparison of visualized turbine endwall secondary flows and measured heat transfer patterns

Various flow visualization techniques were used to define the seondary flows near the endwall in a large heat transfer data. A comparison of the visualized flow patterns and the measured Stanton number distribution was made for cases where the inlet Reynolds number and exit Mach number were matched. Flows were visualized by using neutrally buoyant helium-filled soap bubbles, by using smoke from oil soaked cigars, and by a few techniques using permanent marker pen ink dots and synthetic wintergreen oil. Details of the horseshoe vortex and secondary flows can be directly compared with heat transfer distribution. Near the cascade entrance there is an obvious correlation between the two sets of data, but well into the passage the effect of secondary flow is not as obvious. Previously announced in STAR as N83-14435

Gaugler, R. E.↗