Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Three-dimensional single-cell imaging with X-ray waveguides in the holographic regime

X-ray tomography at the level of single biological cells is possible in a low-dose regime, based on full-field holographic recordings, with phase contrast originating from free-space wave propagation. Building upon recent progress in cellular imaging based on the illumination by quasi-point sources provided by X-ray waveguides, here this approach is extended in several ways. First, the phase-retrieval algorithms are extended by an optimized deterministic inversion, based on a multi-distance recording. Second, different advanced forms of iterative phase retrieval are used, operational for single-distance and multi-distance recordings. Results are compared for several different preparations of macrophage cells, for different staining and labelling. As a result, it is shown that phase retrieval is no longer a bottleneck for holographic imaging of cells, and how advanced schemes can be implemented to cope also with high noise and inconsistencies in the data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductive Spray Paint Fabricated Cylindrical Coplanar Waveguide for Noncontact Liquid-Level Sensing

A noncontact liquid-level sensor using a cylindrical coplanar waveguide (CCPW) is proposed. The concept is demonstrated using a prototype device made by directly spraying conductive paint on the outer surface of a glass cylinder. The position of the air–liquid interface is measured using the time-domain reflection (TDR) signal from the CCPW. The geometric parameters of the prototype sensor were optimized using a full-wave simulation tool. The experimental results show that the prototype CCPW-based liquid-level sensor has a resolution of 29.8μm over a range of 210 mm at the sweeping frequency bandwidth of 500 MHz–4 GHz. The tradeoff between the resolution and the measurement range was discussed. The proposed sensor provides a low-cost, easy-to-fabricate, and noncontact method for liquid-level measurement, which has potential applications in fuel storage, chemical production, and wastewater treatment.

42 ENGINEERING↗

Single Event Transient Response of Vertical and Lateral Waveguide-Integrated Germanium Photodiodes

Pulsed-laser induced single event current measurements on two geometries of waveguide-integrated germanium photodiodes were conducted over a range of operating voltages to examine the impact of photodiode geometry on the transient response. Vertical PIN photodiodes exhibit transients with a duration that is relatively independent of the operating voltage while the transient duration in lateral PIN photodiodes depends on operating voltage. Furthermore, the experimental measurements facilitate identification of device dimensions that impact the transient response. In this work, these results can be used to identify potential radiation mitigation strategies for photodiodes operating in a radiation environment. Understanding the implications of design choices is critical for designing integrated photonic systems that balance system performance with tolerance for radiation degradation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High index contrast polysiloxane waveguides fabricated by dry etching

The authors demonstrate the production of low loss enhanced index contrast waveguides by reactive ion etching of IPG trade mark sign polysiloxane thin films. The use of a silica mask and CHF{sub 3}/O{sub 2} etch gas led to large etch selectivity between the silica and IPG trade mark sign of >20 and etch rates of >100 nm/min. This work indicates that compact optical circuits could be successfully fabricated for telecommunication applications using polysiloxane films.

36 MATERIALS SCIENCE↗

Structural and optical properties of yttrium oxide thin films for planar waveguiding applications

Thin films of yttrium oxide, Y{sub 2}O{sub 3}, were deposited by reactive sputtering and reactive evaporation to determine their suitability as a host for a rare earth doped planar waveguide upconversion laser. The optical properties, structure, and crystalline phase of the films were found to be dependent on the deposition method and process parameters. X-ray diffraction analysis on the ''as-deposited'' thin films revealed that the films vary from amorphous to highly crystalline with a small broad peak at 29 deg. corresponding to the <222> reflections of Y{sub 2}O{sub 3}. The samples with the polycrystalline structure had a stoichiometry close to bulk cubic Y{sub 2}O{sub 3}. Scanning electron microscopy imaging revealed a regular column structure confirming their crystalline nature. The thin film layers which allowed guiding in both visible and infrared regions had lower refractive indices, higher oxygen content, and a more amorphous structure. Higher oxygen pressures during the deposition lead to a more amorphous layer.

36 MATERIALS SCIENCE↗

Conductance dips and spin precession in a nonuniform waveguide with spin–orbit coupling

An infinite waveguide with a nonuniformity, a segment of finite length with spin–orbit coupling, is considered in the case when the Rashba and Dresselhaus parameters are identical. Analytical expressions have been derived in the single-mode approximation for the conductance of the system for an arbitrary initial spin state. Based on numerical calculations with several size quantization modes, we have detected and described the conductance dips arising when the waves are localized in the nonuniformity due to the formation of an effective potential well in it. We show that allowance for the evanescent modes under carrier spin precession in an effective magnetic field does not lead to a change in the direction of the average spin vector at the output of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation of high-frequency azimuthal surface waves by an annular electron beam in a waveguide with a noncircular interface of the plasma column

An initial stage of the interaction of an electron beam ring rotating along Larmor orbits in a gap between the plasma column and a circular metal chamber of a cylindrical waveguide with extraordinarily polarized electromagnetic waves of the surface type is studied. These waves propagate along the azimuthal angle across an axial magnetic field in the range above the upper hybrid frequency. Using numerical analysis of the dispersion relation, it is shown that by the aid of an appropriate choice of the shape of the plasma-vacuum interface one can achieve a significant increasing of growth rates of the resonant beam instability of these waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kelvin-Helmholtz instability on the magnetopause, magnetohydrodynamic waveguide in the outer magnetosphere, and Alfven resonance deep in the magnetosphere

Oscillations of the 'magnetosphere-solar wind' system are studied analytically in the framework of a plane-stratified model of the medium. The properties of oscillations are determined by three phenomena: Kelvin-Helmholtz instability on the tangential discontinuity (magnetopause) separating the magnetosphere and the solar wind, the presence of a waveguide for fast magnetosonic waves in the magnetosphere, and the Alfven resonance-a sharp increase in the amplitude of oscillations having the properties of Alfven waves-in the inner magnetosphere. The oscillations of the system form a discrete spectrum of eigenmodes. Analytical expressions are obtained for the frequency and growth rate of instability of each mode, as well as for the functions describing the spatial structure of these modes. All these characteristics of the eigenmodes are shown to depend on the velocity of the solar wind as a parameter. The dependences of the main mode characteristics (such as the instability thresholds, the points of the maximum and minimum growth rate, and the spatial distributions of the oscillation energy) on this parameter are determined for each eigenmode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of HgCdTe waveguide structures with quantum wells for long-wavelength stimulated emission

The photoluminescence and stimulated emission during interband transitions in quantum wells based on HgCdTe placed in an insulator waveguide based on a wide-gap CdHgTe alloy are studied. Heterostructures with quantum wells based on HgCdTe are of interest for the development of long-wavelength lasers in the range of 25–60 μm, which is currently unattainable for quantum-cascade lasers. Optimal designs of quantum wells for attainment of long-wavelength stimulated emission under optical pumping are discussed. It is shown that narrow quantum wells from pure HgTe appear to be more promising for long-wavelength lasers in comparison with wide (potential) wells from the alloy due to the suppression of Auger recombination. It is demonstrated that molecular-beam epitaxy makes it possible to obtain structures for the localization of radiation with a wavelength of up to 25 μm at a high growth rate. Stimulated emission is obtained for wavelengths of 14–6 μm with a threshold pump intensity in the range of 100–500 W/cm{sup 2} at 20 K.

36 MATERIALS SCIENCE↗

Reduction of Internal Loss and Thermal Resistance in Diode Lasers with Coupled Waveguides

The results of studying edge-emitting quantum-well lasers with a layered design having coupled planar waveguides, capable of suppressing the generation of excited transverse modes, are presented. In this case, a low internal loss (0.4 cm{sup –1}) is provided, combined with a small depth (~0.9 μm) of the active region, which results in a low thermal resistance of 6.0 (K/W) mm without a submount.

36 MATERIALS SCIENCE↗

Study of the Auger Recombination Energy Threshold in a Series of Waveguide Heterostructures with HgTe/Cd{sub 0.7}Hg{sub 0.3}Te QWs Near 14 μm

Stimulated emission from a heterostructure with Hg{sub 0.903}Cd{sub 0.097}Te/Cd{sub 0.7}Hg{sub 0.3}Te quantum wells, placed in a waveguide layer of wide-gap CdHgTe, is obtained at wavelengths of 14–11 μm and a temperatures of 18–80 K. The threshold Auger recombination energy is calculated for a set of heterostructures with quantum wells of pure HgTe with a band gap of 90 meV (wavelength 14 μm). The possibility of fabricating lasers operating at 14 μm and working temperatures higher than that of liquid nitrogen is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2D Bragg Resonators Based on Planar Dielectric Waveguides (from Theory to Model-Based Testing)

Using analytical approaches and CST Microwave Studio 3D simulation, the electrodynamic characteristics of 2D Bragg resonators based on planar dielectric waveguides with doubly periodic corrugation are theoretically analyzed. Such resonators are of great interest to obtain directed narrow-band radiation in heterolasers with large active regions. Model electrodynamic experiments on the “cold” testing of such structures in the millimeter range are performed. Good agreement between the experimental and simulation results is shown, including the existence of the highest-Q mode within the Bragg reflection band in the absence of defects in the periodicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical ray paths in a quasi-periodic waveguide or a multipass cavity with smoothly varying properties

Ray paths in a quasi-periodic optical system (waveguide of cavity) with smoothly varying properties have been constructed along the ray path. The ray-transfer matrix is constructed for a large number of ray paths; it has been shown that the conventional stability condition (the modulus of the ray-transfer matrix trace for a ray path is smaller than two) does not ensure the boundedness of the beam path after a large number of paths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the Thicknesses and Visualization of Ion-Exchange Waveguides in Glasses by Scanning Electron Microscopy

The formation of a surface layer with silver and sodium concentration gradients in K8-grade glasses as a result of ion exchange is demonstrated by scanning electron microscopy (SEM) and electron probe X-ray microanalysis. The silver ions enriched layers with different thicknesses, depending on the duration of the ion exchange from the silver melt, are visualized in the secondary electrons mode. SEM data on the thickness of the silver enriched layer are in good agreement with the results of calculation from the diffusion equation for silver in glass. The dependence of the silver concentration on the diffusion depth is obtained using elemental composition mapping over the glass cross section. The presence of a layer with a silver concentration gradient leads to formation of a gradient waveguide. Discrete peaks in silver concentration profiles, caused by specific features of mutual diffusion of sodium and silver ions in glasses, are found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarizability, volume expansion, and stress contributions to the refractive index change of Cu{sup +}-Na{sup +} ion exchanged waveguides in glass

The refractive index of optical waveguides formed by electric field assisted Cu{sup +}-Na{sup +} ion exchange in two types of glass is measured. Assuming, as in a previously published work, that the observed refractive index increase is solely due to polarizability changes, the difference in electronic polarizability between Cu{sup +} and Na{sup +} ions is determined by applying the Lorentz-Lorenz equation to the data. In our work, the concentration of exchanged ions, which is a necessary input to the Lorentz-Lorenz equation, is determined by combining optical data and electrical data obtained during the exchange. Values for the electronic polarizability difference are in agreement with that in the literature. However, when a correction is made, taking into consideration the measured volume expansion and stress in the glass, the calculated electronic polarizability difference is shown to increase by 19%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of a tapered slot waveguide dielectric laser accelerator for sub-relativistic electrons

We propose a dielectric laser accelerator design based on a tapered slot waveguide structure for sub-relativistic electron acceleration. This tapering scheme allows for straightforward tuning of the phase velocity of the accelerating field along the propagation direction, which is necessary for maintaining synchronization with electrons as their velocities increase. Furthermore, the non-resonant nature of this design allows for better tolerance to experimental errors. We also introduce a method to design this continuously tapered structure based on the eikonal approximation, and give a working example based on realistic experimental parameters.

47 OTHER INSTRUMENTATION↗

Amplification-free nucleic acid detection with a fluorescence-based waveguide biosensor

Early detection of pathogens using nucleic acids in clinical samples often requires sensitivity at the single-copy level, which currently necessitates time-consuming and expensive nucleic acid amplification. Here, we describe 1) a redesigned flow cell in the shape of a trapezoid-subtracted geometric stadium, and 2) modified experimental procedures that allow for the measurement of sub-attomolar analytes in microliter quantities on a fluorescence-based waveguide biosensor. We verified our instrumental sensitivity with a 200-μL sample of a fluorescent streptavidin conjugate at 100 zM (100 zeptomolar, or 100·10 −21 mol L −1 ) and theoretically explored the applicability of this modified sensing platform in a sandwich immunoassay format using a Langmuir adsorption model. We present assays that demonstrate specific detection of synthetic influenza A DNA (in buffer) and RNA (in saliva) oligonucleotides at the single-copy level (200 μL at 10 zM) using a fluorescent molecular beacon. Lastly, we demonstrate detection of isolated genomic influenza A RNA at a clinically relevant concentration. This work constitutes a sensitivity improvement of over twelve orders of magnitude compared to our previous nucleic acid detection work, illustrating the significant enhancements that can be gained with optimized experimental design.

59 BASIC BIOLOGICAL SCIENCES↗

Gold Ion Beam Milled Gold Zero-Mode Waveguides

Zero-mode waveguides (ZMWs) are widely used in single molecule fluorescence microscopy for their enhancement of emitted light and the ability to study samples at physiological concentrations. ZMWs are typically produced using photo or electron beam lithography. We report a new method of ZMW production using focused ion beam (FIB) milling with gold ions. We demonstrate that ion-milled gold ZMWs with 200 nm apertures exhibit similar plasmon-enhanced fluorescence seen with ZMWs fabricated with traditional techniques such as electron beam lithography.

36 MATERIALS SCIENCE↗