Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Velocity structure and evolution of the moon

Seismic data from the Apollo Passive Seismic Network stations are analyzed to determine the velocity structure and to infer the composition and physical properties of the lunar interior. Data from artificial impacts (SIBV booster and LM-ascent stage) cover a distance range of 9 to 1750 km. Travel times and amplitudes, as well as theoretical seismograms, are used to derive a velocity model for the outer 150 km of the moon. The P-wave velocity model confirms an earlier report of a lunar crust in the eastern part of Oceanus Procellarum. The crust is about 60 km thick and may consist of two layers in the mare regions. Possible values for the P-wave velocity in the uppermost mantle are between 7.6 and 9.0 km/sec. The 9 km/sec velocity represents either a localized heterogeneous unit, or a thin layer less than about 40 km in thickness. The elastic properties of the deep interior, as inferred from the seismograms of natural events (meteoroid impacts and moonquakes) occurring at great distances, indicate that there is an increase in attenuation and a possible decrease of velocity at depths below about 1000 km.

Toksoz, M. N.↗
DOE OSTI2020

FOSWEC dynamics and controls test report

This report describes the testing of a model scale wave energy converter. This device, which uses two aps that pivot about a central platform when excited by waves, has a natural frequency within the range of the waves by which it is excited. The primary goal of this test was to assess the degree to which previously developed modeling, experimentation, and control design methods could be applied to a broad range of wave energy converter designs. Testing was conducted to identify a dynamic model for the impedance and excitation behavior of the device. Using these models, a series of closed loop tests were conducted using a causal impedance matching controller. This report provides a brief description of the results, as well as a summary of the device and ex- perimental design. The results show that the methods applied to this experimental device perform well and should be broadly applicable.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Numerical Model Development of a Variable-Geometry Attenuator Wave Energy Converter: Preprint

Because the wave energy industry is still in its infancy, an optimal design for wave energy converters (WECs) has yet to be established; more work is needed to explore various cost reduction pathways. The primary cost-reduction pathway considered for this work is the optimization of the geometric profile on an attenuator WEC to maximize power production while, at the same time, minimizing capital expenditures through the use of variable-geometry modules. In this investigation, the variable geometry modules consist of inflatable bags placed on either side of a base central steel cylinder that would be inflated in low moderate sea states to maximize power capture and then deflated in moderate-extreme sea states to minimize wave loading. The numerical model and simulation of the attenuator WEC were developed and completed using WEC-Sim, which is an open-source code that is appropriate for use in evaluating the dynamic response of the different WEC models in operational seas. The power production estimates were obtained from the Wave Energy Prize (WEP) sea states, which are representative of U. S. deployment sites, to calculate the average climate capture width that is used in the WEP ACE calculation. Preliminary capital expenditure costs were obtained assuming the base central steel cylinder mass was equal to the fluid displaced mass, minus the mass of the variable-geometry bags. The additional weight required to offset the additional buoyancy from the variable-geometry bags was assumed to come from the addition of seawater ballast. The variable-geometry attenuator model was found to have a similar power capture efficiency as a fixed-body model, but is expected to have a lower characteristic capital expenditure given its more streamlined profile, which demonstrates that variable-geometry modules may provide a realistic cost-reduction pathway to help design a more cost-competitive WEC.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2020

Numerical Model Development of a Variable-Geometry Attenuator Wave Energy Converter

Because the wave energy industry is still in its infancy, an optimal design for wave energy converters (WECs) has yet to be established; more work is needed to explore various cost-reduction pathways. The primary cost-reduction pathway considered for this work is the optimization of the geometric profile on an attenuator WEC to maximize power production while, at the same time, minimizing capital expenditures through the use of variable-geometry modules. In this investigation, the variable-geometry modules consist of inflatable bags placed on either side of a base central steel cylinder that would be inflated in low-moderate sea states to maximize power capture and then deflated in moderate-extreme sea states to minimize wave loading. The numerical model and simulation of the attenuator WEC were developed and completed using WEC-Sim, which is an open-source code that is appropriate for use in evaluating the dynamic response of the different WEC models in operational seas. The power production estimates were obtained from the Wave Energy Prize (WEP) sea states, which are representative of U. S. deployment sites, to calculate the average climate capture width that is used in the WEP ACE calculation. Preliminary capital expenditure costs were obtained assuming the base central steel cylinder mass was equal to the fluid displaced mass, minus the mass of the variable-geometry bags. The additional weight required to offset the additional buoyancy from the variable-geometry bags was assumed to come from the addition of seawater ballast. The variable-geometry attenuator model was found to have a similar power capture efficiency as a fixed-body model, but is expected to have a lower characteristic capital expenditure given its more streamlined profile, which demonstrates that variable-geometry modules may provide a realistic cost-reduction pathway to help design a more cost-competitive WEC.

50 EE - Wind and Water Power Program - Water (EE-4↗
NASA NTRS1997

Possible signatures of nonlinear MHD waves in the solar wind: UVCS observations and models

Recent ultraviolet coronagraph spectrometer (UVCS) white light channel observations are discussed. These data indicated quasi-periodic variations in the polarized brightness in the polar coronal holes. The Fourier power spectrum analysis showed significant peaks at about six minutes and possible fluctuations on longer time scales. The observations are consistent with the predictions of the nonlinear solitary-like wave model. The purpose of a planned study on plume and inter-plume regions of coronal holes, motivated by the result of a 2.5 magnetohydrodynamic model (MHD), is explained.

Ofman, L.↗
NASA NTRS1992

Absorption of acoustic waves by sunspots. II - Resonance absorption in axisymmetric fibril models

Analytical calculations of acoustic waves scattered by sunspots which concentrate on the absorption at the magnetohydrodynamic Alfven resonance are extended to the case of a flux-tube embedded in a uniform atmosphere. The model is based on a flux-tubes of varying radius that are highly structured, translationally invariant, and axisymmetric. The absorbed fractional energy is determined for different flux-densities and subphotospheric locations with attention given to the effects of twist. When the flux is highly concentrated into annuli efficient absorption is possible even when the mean magnetic flux density is low. The model demonstrates low absorption at low azimuthal orders even in the presence of twist which generally increases the range of wave numbers over which efficient absorption can occur. Resonance absorption is concluded to be an efficient mechanism in monolithic sunspots, fibril sunspots, and plage fields.

Rosenthal, C. S.↗
DOE OSTI2022

Early arrival waveform inversion using data uncertainties and matching filters with application to near-surface seismic refraction data

We develop an early arrival waveform inversion (EAWI) technique for high-resolution near-surface velocity estimation by iteratively updating the P-wave velocity model to minimize the difference between the observed and calculated seismic refraction data. Traditional EAWI uses a least-squares penalty function and an acoustic forward-modeling engine. Conventional least-squares error is sensitive to data with low signal-to-noise ratio (S/N) and iterations of EAWI stop at a local-minimum data misfit or at the preassigned maximum number of iterations. These stopping criteria can result in overfitting the data. In addition, fitting the elastic field data with an acoustic modeling engine can introduce artifacts in velocity estimation, especially in land data with significant elastic effects. To overcome these challenges, we develop a robust EAWI (REAWI) method by (1) incorporating the data uncertainties into the penalty function and (2) mitigating the elastic effects using a matching filter workflow. The data uncertainties are estimated from waveform reciprocal errors. When full-waveform reciprocity is not available, trace interpolation is applied. The proposed method prevents closely fitting data with low S/N, avoids overall overfitting by stopping the iterations when a normalized chi-square ([Formula: see text]) waveform misfit of one is achieved, and is less affected by elastic effects. Numerical examples and application to near-surface refraction data at a groundwater contamination site suggest that the final REAWI models are more accurate than the corresponding EAWI models, at the same level of misfit. This is the first known application of a matching filter workflow to real land data. The final REAWI models satisfy an appropriate misfit between the real data and predicted elastic P-wave data, making this approach in this respect equivalent to elastic waveform inversion. We also develop a method to analyze model constraint by examining the energy of the wavefield Fréchet derivative thereby avoiding the influence of the data residuals in traditional Fréchet kernels.

Geochemistry & Geophysics↗
DOE OSTI2022

Alternative formulation of weak magnetohydrodynamic turbulence theory

In a recent paper, the weak turbulence theory for incompressible magnetohydrodynamics is formulated by employing the method customarily applied in the context of kinetic weak plasma turbulence theory. Such an approach simplified certain mathematical procedures including achieving the closure relationship. The formulation in the above-cited paper starts from the equations of incompressible magnetohydrodynamic (MHD) theory expressed via Elsasser variables. The derivation of nonlinear wave kinetic equation therein is obtained via a truncated solution at the second-order of iteration following the standard practice. In the present paper, the weak MHD turbulence theory is alternatively formulated by employing the pristine form of incompressible MHD equation rather than that expressed in terms of Elsasser fields. The perturbative expansion of the nonlinear momentum equation is carried out up to the third-order iteration rather than imposing the truncation at the second order. Furthermore, it is found that while the resulting wave kinetic equation is identical to that obtained in the previous paper cited above, the third-order nonlinear correction plays an essential role for properly calculating derived quantities such as the total and residual energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Planar, longitudinal, compressive waves in solids: Thermodynamics and uniaxial strain restrictions

A new tri-axial pressure-based constitutive expression has been found using Cauchy's stress tensor. This stress state emphasizes pressure and shear stress. The description is a pressure plus an effective shear stress allowing for a constitutive law based on atomic solid-state phase changes in crystalline cells due to pressure plus shear-based dislocation motion commonly associated with plasticity. Pressure has a new role in the material's constitutive response as it is separated from plasticity. The thermo-mechanical system describes third-order Gibbs’ expressions without specific volume restrictions placed upon the material. Isothermally, the ratio of heat to shear work in elastic copper is shown to approach zero at a very low temperature and become larger than one as temperature approaches melting. Wave compression models investigated are elastic and plastic: in fully elastic materials, the planar wave is restricted by Poisson's effect although plastic shear changes this constraint. Plastic deformation, dominated by dissipative shear stresses in uniaxial strain, heats the material while excluding phase changes from hydrostatic pressures. The material properties per se across Hugoniot shocks are described with entropy concepts. Shock waves are exceedingly complex since the constitutive laws are linked at extreme temperatures, pressures, and shear stresses. Isothermal, isentropic, isochoric, and iso-shear conditions are used throughout with Jacobian algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Enhancement of charge density wave correlations in a Holstein model with an anharmonic phonon potential

The Holstein Hamiltonian describes itinerant electrons whose site density couples to local phonon degrees of freedom. In the single-site limit, at half filling, the electron-phonon coupling results in a double-well structure for the lattice displacement, favoring empty or doubly occupied sites. In two dimensions and on a bipartite lattice in d ≥ 2, intersite hopping causes these doubly occupied and empty sites to alternate in a charge density wave (CDW) pattern when the temperature is lowered. Because a discrete symmetry is broken, this occurs in a conventional second-order transition at finite T cdw . In this paper, we investigate the effect of changing the phonon potential energy to one with an intrinsic double-well structure even in the absence of electron-phonon coupling. While this aids in the initial process of pair formation, the implications for subsequent CDW order are nontrivial. One expects that, when the electron-phonon coupling is too strong, the double wells become deep and the polaron mass gets large, an effect which reduces T cdw . Here, we show here the existence of regions of parameter space where the double-well potential, while aiding local pair formation, does so in a way which also substantially enhances long-range CDW order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

A General-applications Direct Global Matrix Algorithm for Rapid Seismo-acoustic Wavefield Computations

A new matrix method for rapid wave propagation modeling in generalized stratified media, which has recently been applied to numerical simulations in diverse areas of underwater acoustics, solid earth seismology, and nondestructive ultrasonic scattering is explained and illustrated. A portion of recent efforts jointly undertaken at NATOSACLANT and NORDA Numerical Modeling groups in developing, implementing, and testing a new fast general-applications wave propagation algorithm, SAFARI, formulated at SACLANT is summarized. The present general-applications SAFARI program uses a Direct Global Matrix Approach to multilayer Green's function calculation. A rapid and unconditionally stable solution is readily obtained via simple Gaussian ellimination on the resulting sparsely banded block system, precisely analogous to that arising in the Finite Element Method. The resulting gains in accuracy and computational speed allow consideration of much larger multilayered air/ocean/Earth/engineering material media models, for many more source-receiver configurations than previously possible. The validity and versatility of the SAFARI-DGM method is demonstrated by reviewing three practical examples of engineering interest, drawn from ocean acoustics, engineering seismology and ultrasonic scattering.

Schmidt, H.↗
NASA NTRS1993

A model-based approach for detection of objects in low resolution passive millimeter wave images

A model-based vision system to assist the pilots in landing maneuvers under restricted visibility conditions is described. The system was designed to analyze image sequences obtained from a Passive Millimeter Wave (PMMW) imaging system mounted on the aircraft to delineate runways/taxiways, buildings, and other objects on or near runways. PMMW sensors have good response in a foggy atmosphere, but their spatial resolution is very low. However, additional data such as airport model and approximate position and orientation of aircraft are available. These data are exploited to guide our model-based system to locate objects in the low resolution image and generate warning signals to alert the pilots. Also analytical expressions were derived from the accuracy of the camera position estimate obtained by detecting the position of known objects in the image.

Kasturi, Rangachar↗
DOE OSTI2021

Convection–Kelvin Wave Coupling in a Global Convection-Permitting Model

A convectively coupled equatorial Kelvin wave (CCKW) was observed over the equatorial Indian Ocean in early November 2011 during the DYNAMO field campaign. This study examines the structure of the CCKW event using two simulations made using the MPAS model: one with 3-km grid spacing without convective parameterization and another with a 15-km grid and parameterized convection. Both simulations qualitatively capture the observed structure of the CCKW, including its vertical tilt and progression of cloud/precipitation structures. The two simulations, however, differ substantially in the amplitude of the CCKW-associated precipitation. While the 3-km run realistically captures the observed modulation of precipitation by the CCKW, the 15-km simulation severely underestimates its magnitude. To understand the difference between the two MPAS simulations regarding wave–convection coupling within the CCKW, the relationship of precipitation with convective inhibition, saturation fraction, and surface turbulent fluxes is investigated. Results show that the 15-km simulation underestimates the magnitude of the CCKW precipitation peak in association with its unrealistically linear relationship between moisture and precipitation. Precipitation, both in observations and the 3-km run, is predominantly controlled by saturation fraction and this relationship is exponential. In contrast, the parameterized convection in the 15-km run is overly sensitive to convective inhibition and not sensitive enough to environmental moisture. The implications of these results on CCKW theories are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Urban-Scale Heat Wave Visualization: WRF-UCM modeling in Los Angeles, California

This visualization includes an E3SM-based animation of temperatures in North America during the July 2018 heat wave, followed by a higher resolution focus over Los Angeles using the WRF-UCM model to illustrate neighborhood-scale temperatures that account for urban features like buildings, waste heat, and vegetation, as well as sea breeze impacts. Finally, we show the potential impact of cool roofs to reduce temperatures.

Vahmani, Pouya↗
DOE OSTI2024

Anomalous Hall crystals in rhombohedral multilayer graphene. II. General mechanism and a minimal model

Here we propose a minimal "three-patch model"for the anomalous Hall crystal (AHC), a topological electronic state that spontaneously breaks both time-reversal symmetry and continuous translation symmetry. The proposal for this state is inspired by the recently observed integer and fractional quantum Hall states in rhombohedral multilayer graphene at zero magnetic field. There, interaction effects appear to amplify the effects of a weak moiré potential, leading to the formation of stable, isolated Chern bands. It has been further shown that Chern bands are stabilized in mean-field calculations even without a moiré potential, enabling a realization of the AHC state. Our model is built on the dissection of the Brillouin zone into patches centered around high-symmetry points. Within this model, the wave functions at high-symmetry points fully determine the topology and energetics of the state. We extract two quantum geometrical phases of the noninteracting wave functions that control the stability of the topologically nontrivial AHC state. The model predicts that the AHC state wins over the topological trivial Wigner crystal in a wide range of parameters, and agrees very well with the results of full self-consistent Hartree-Fock calculations of the rhombohedral multilayer graphene Hamiltonian.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1976

A comparative study of three techniques for using the spectral matrix in wave analysis

Three techniques - power spectral analysis, coherency analysis, and wave analysis - for studying ULF waves in the magnetosphere are described. These techniques, while mathematically dissimilar, are all based on the assumption that, at any single frequency, a single plane wave, propagating along the normal to the plane, is present. Wave polarization parameters provided by these techniques are important in the development of models of wave generation. A comparative study of the three techniques was carried out using simulated data involving known wave and noise properties and real ULF event data from ATS 1 and 6.

Arthur, C. W.↗
NASA NTRS1985

Diffuse galactic annihilation radiation from supernova nucleosynthesis

The propagation of MeV positrons in the outer ejecta of type I supernovae was investigated. It was found that the positrons created at times of approx 100 days propagated along magnetic field lines in the outer ejecta without any appreciable pitch-angle scattering or excitation of hydromagnetic waves. The lack of significant pitch-angle scattering is well consistent with models of wave excitation and scattering by resonant interactions. This occurs because time periods to scatter the particles or to excite waves are significantly longer than escape times. Thus it is expected that, when positrons are not coupled to the ejecta by Coulomb collisions, they escape from the relatively cold, dense ejecta and reside predominantly in the tenuous, hotter, shock-heated interstellar gas. In the tenuous shock-heated gas the positron lifetime against annihilation is much greater than lifetimes in the dense ejectra. Thus the production of steady-state diffuse annihilation radiation by some fraction of these escaped positrons seems probable.

Higdon, J. C.↗