Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transport coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Collision integrals and high temperature transport properties for N-N, O-O, and N-O

Accurate collision integrals for the interactions of N(4S0) + N(4S0), O(3P) + O(3P), and N(4S0) + O(3P) are reported. These are computed from a semiclassical formulation of the scattering using the best available representations of all of the potential energy curves needed to describe the collisions. Spectroscopic curves and other accurate measured data are used where available; the results of accurate ab initio electronic structure calculations are used to determine the remaining potential curves. The high-lying states are found to give the largest contributions to the collision cross sections. The nine collision integrals needed to determine transport properties to second order are tabulated for translational temperatures in the range 250-100,000 K. The viscosity, thermal conductivity, diffusion coefficient, and thermal diffusion factor for a gas composed of nitrogen and oxygen atoms in thermal equilibrium have been calculated. It is found that the second-order contribution to the transport properties is small. Graphs of these transport properties for various mixture ratios are presented for temperatures in the range 5000-15,000 K.

Levin, E.↗
DOE OSTI2020

Effect of salt concentration profiles on protrusion growth in lithium-polymer-lithium cells

In this report, the formation of dendrites and other protrusions on lithium metal anodes is a subject of continued interest due to the potential to incorporate these anodes in next-generation rechargeable batteries with increased energy densities. Solid polymer electrolytes show improved stability against lithium metal compared to liquid carbonate electrolytes. We have studied the effect of salt concentration on the formation of protrusions formed on electrodeposited lithium through a rigid block copolymer electrolyte, polystyrene-block-poly(ethylene oxide) (PS-b-PEO or SEO), in a lithium-lithium symmetric cell. The cell lifetime decreases by a factor of 100 when salt concentration is increased by a factor of 5. Our main objective is to understand the reason for this observation. We show that this decrease is not due to a salt-induced change of the morphology of the block-copolymer electrolyte, nor is it due to a salt-induced change of mechanical properties. We use an approach based on Newman's concentrated solution theory to fully characterize ion transport in the block-copolymer electrolyte, and report the conductivity, salt diffusion coefficient, cation transference number, and thermodynamic factor. Neither cell lifetime nor protrusion density in failed cells correlate with any of these electrochemical parameters. However, the electrochemical parameters can be used to predict salt concentration profiles in our symmetric cells. We posit that an important parameter in protrusion growth is the magnitude of the salt concentration gradient, Δ. We observe a direct correlation between Δ and lithium protrusion growth.

25 ENERGY STORAGE↗
DOE OSTI2025

Stabilization of high-performance rock-salt LiMnSbTe3 thermoelectrics with embedded van der Waals-like gaps

Rock-salt-structured compounds like lead chalcogenides are promising thermoelectrics, as their high symmetry, strong anharmonicity, and favorable phase behavior collectively lead to high performance by enabling large power factors and ultralow thermal conductivity. Here, we report LiMnSbTe 3 , a new rock-salt semiconductor stabilized through targeted chemical design by combining hexagonal MnTe with cubic LiSbTe 2 . Embedded in the highsymmetry matrix, van der Waals-like gaps form due to Sb 2 Te 3 nanoscale segregation, which acts as effective phonon-scattering centers, leading to a low lattice thermal conductivity of 0.37Wm- 1 K -1 at 873 K with alloy scattering from disordered cations. The ordered local structure of Sb2Te 3 -type vdW-like gaps and the cross-gap interaction facilitate the carrier transport. Aided by energyconverged valence bands and a paramagnon drag effect, high Seebeck coefficients and enhanced power factor can be achieved, leading to a high ZT of 1.2 at 873 K. Furthermore, introducing Mn deficiency increases ZT to 1.5, highlighting the potential for higher performance through optimized doping or alloying. A segmented single-leg thermoelectric module achieves an output power density of 0.52 Wcm -2 and an efficiency of 8.7% under ΔT of 478 K, further demonstrating its promising thermoelectric applications.

42 ENGINEERING↗
DOE OSTI2020

Epitaxial growth of rock salt MgZrN 2 semiconductors on MgO and GaN

Ternary nitride compound semiconductors have attracted recent attention as electronic materials since their properties can be tuned by cation stoichiometry and ordering. A recently discovered example is MgZrN 2 , a ternary analog to the rock salt semiconductor ScN. MgZrN 2 has a larger bandgap and stronger dielectric response than the binary compound. Polycrystalline thin films of MgZrN 2 have been studied, but demonstration of high-quality growth is still required to establish its suitability for technological applications. Here, we report on epitaxial growth of MgZrN 2 thin films on (100) and (111) MgO substrates and (001) GaN templates. The MgZrN 2 composition is confirmed by Rutherford backscattering spectrometry, showing no oxygen in the film except for a thin surface oxide layer. Epitaxial growth results in MgZrN 2 with x-ray diffraction rocking curves with a full-width at half-maximum in the range of 0.3–3.0°, depending on the substrate. Transmission electron microscopy analysis of the MgZrN 2 film grown on a (111) MgO substrate confirms epitaxial growth and shows a sharp film/substrate interface. In-plane temperature-dependent Hall effect measurements show that the material is an n-type semiconductor with a relatively high concentration ( n 300K ≈ 10 19 –10 20 cm -3 ) of thermally activated electrons. Room-temperature transport measurements show a conductivity of 25 S cm -1 and a Seebeck coefficient of -80 μ V K -1 . Overall, these results provide an important step toward integration of rock salt MgZrN 2 with other technological nitrides for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Prediction of L⁢i 3 ⁢F⁡e 8 ⁢B 8 compound with rapid one-dimensional ion diffusion channels

Using a computational crystal structure search in the Li-Fe-B ternary system, we predict a stable phase of L⁢i 3 ⁢F⁡e 8 ⁢B 8 , featuring 1D channels that enable rapid Li-ion transport. Ab initio molecular dynamics simulations show that the Li-ion diffusion coefficient in L⁢i 3 ⁢F⁡e 8⁢ B 8 surpasses that of common electrode and conductive additive materials by several orders of magnitude. The high diffusion in L⁢i 3 ⁢F⁡e 8 ⁢B 8 can be explained by the Frenkel–Kontorova model, which describes an incommensurate state between the Li diffusion chain and the periodic potential field caused by the FeB backbone structure. The favorable lithium-ion diffusivity and mechanical properties of L⁢i 3 ⁢F⁡e 8 ⁢B 8 make it a promising conductive additive for battery materials. Furthermore, an external magnetic field can further manipulate the properties of this material due to its predicted itinerant ferromagnetism, which also offers a platform for exploring spin-dependent phenomena.

1-dimensional systems↗
DOE OSTI2023

Description of the multinucleon transfer mechanism for Ca 48 + Pu 244 and Kr 86 + Pt 198 reactions in a quantal transport approach

Multinucleon transfer (MNT) reactions involving heavy projectile and target combinations stand as a promising method for synthesizing new neutron-rich exotic nuclei, which may not be possible using hot or cold fusion reactions or fragmentation. Exploring the mechanisms behind MNT reactions is essential and it requires a comprehensive theoretical framework that can explain the physical observables in these reactions. This work aims to show that the quantal diffusion approach based on the stochastic mean-field (SMF) theory is capable of explaining the reaction dynamics observed in MNT reactions. Primary product mass distributions in 48 Ca + 244 Pu reaction at E c.m. = 203.2 MeV and 86 Kr + 198 Pt reaction at E c.m. = 324.2 MeV are calculated and compared with the available experimental data. In this work, we utilize the time-dependent Hartree-Fock (TDHF) calculations to analyze the mean-field reaction dynamics computationally in the reactions 48 Ca + 244 Pu and 86 Kr + 198 Pt for a broad range of initial angular momenta. Quantal transport description based on the SMF approach is used to calculate quantal diffusion coefficients and mass variances in 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary products arising from quasifission reactions are described by joint probability distribution in the SMF approach and those arising from fusion-fission are estimated by using the statistical deexcitation code gemini + +. Mean values of charge and mass numbers, scattering angles of the primary reaction products, and the total kinetic energies after the collision are calculated within the TDHF framework for a broad range of initial angular momenta. Throughout all the collisions, drift toward the mass symmetry and large mass dispersion associated with this drift are observed. Here, the calculated primary fragment and mass distributions using the SMF approach successfully explain experimental observations for the 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary mass distributions, mean values of binary products, and mass dispersions are determined and results are compared with the available experimental data. The observed agreement between the experimental data and SMF results highlights the effectiveness of the quantal diffusion mechanism based on the SMF approach, which does not include any adjustable parameters other than standard parameters of Skyrme energy density functional.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1984

On the linear approximation of gravity wave saturation in the mesosphere

Lindzen's model of gravity wave breaking is shown to be inconsistent with the process of convective adjustment and associated turbulent outbreak. The K-theory turbulent diffusion model used by Lindzen implies a spatially uniform turbulent field which is not in agreement with the fact that gravity wave saturation and the associated convection produce turbulence only in restricted zones. The Lindzen model may be corrected to some extent by taking the turbulent Prandtl number for a diffusion acting on the wave itself to be very large. The eddy diffusion coefficients computed by Lindzen then become a factor of 2 larger and eddy transports of heat and constituents by wave fields vanish to first order.

Chao, W. C.↗
NASA NTRS1992

Wall interference calculation in a transonic test section including simulation of discrete slots

A computational simulation of a transonic wind tunnel test section with longitudinally slotted walls is described. This nonlinear slot model includes dynamic-pressure effects and a plenum pressure constraint. The simulation method developed is found to be a useful tool for analyzing the nature of the flowfield that exists in a longitudinally slotted transonic test section. Results obtained from the discrete-slot model are similar to those of a homogeneous model when a plenum pressure coefficient of zero is utilized, indicating little effect of slot discreteness with the transport aircraft models examined.

Al-Saadi, Jassim A.↗
NASA NTRS2001

Theory and Simulation of Self- and Mutual-Diffusion of Carrier Density and Temperature in Semiconductor Lasers

Carrier diffusion and thermal conduction play a fundamental role in the operation of high-power, broad-area semiconductor lasers. Restricted geometry, high pumping level and dynamic instability lead to inhomogeneous spatial distribution of plasma density, temperature, as well as light field, due to strong light-matter interaction. Thus, modeling and simulation of such optoelectronic devices rely on detailed descriptions of carrier dynamics and energy transport in the system. A self-consistent description of lasing and heating in large-aperture, inhomogeneous edge- or surface-emitting lasers (VCSELs) require coupled diffusion equations for carrier density and temperature. In this paper, we derive such equations from the Boltzmann transport equation for the carrier distributions. The derived self- and mutual-diffusion coefficients are in general nonlinear functions of carrier density and temperature including many-body interactions. We study the effects of many-body interactions on these coefficients, as well as the nonlinearity of these coefficients for large-area VCSELs. The effects of mutual diffusions on carrier and temperature distributions in gain-guided VCSELs will be also presented.

Li, Jian-Zhong↗
NASA NTRS2012

Detached-Eddy Simulation Based on the V2-F Model

Detached-eddy simulation (DES) based on the v(sup 2)-f Reynolds-averaged Navier-Stokes (RANS) model is developed and tested. The v(sup 2)-f model incorporates the anisotropy of near-wall turbulence which is absent in other RANS models commonly used in the DES community. The v(sup 2)-f RANS model is modified in order the proposed v(sup 2)-f-based DES formulation reduces to a transport equation for the subgrid-scale kinetic energy isotropic turbulence. First, three coefficients in the elliptic relaxation equation are modified, which is tested in channel flows with friction Reynolds number up to 2000. Then, the proposed v(sup 2)-f DES model formulation is derived. The constant, C(sub DES), required in the DES formulation was calibrated by simulating both decaying and statistically-steady isotropic turbulence. After C(sub DES) was calibrated, the v(sub 2)-f DES formulation is tested for flow around a circular cylinder at a Reynolds number of 3900, in which case turbulence develops after separation. Simulations indicate that this model represents the turbulent wake nearly as accurately as the dynamic Smagorinsky model. Spalart-Allmaras-based DES is also included in the cylinder flow simulation for comparison.

Jee, Sol Keun↗
NASA NTRS2011

TPSAS-NF1676L-13037-DND

Mineral dust has a significant and uncertain role in the direct aerosol radiative forcing of climate. Spaceborne lidars such as CALIOP help reduce these uncertainties through vertical profile measurements of aerosol optical properties. One current limitation to the accurate retrieval of aerosol extinction and optical depth from CALIOP is the assumed relationship between the aerosol extinction to aerosol backscatter (i.e. the extinction-to-backscatter ratio, also referred to here as the lidar ratio or Sa). This problem is especially acute at 1064 nm, where few estimates of the lidar ratio exist. This study uses a dataset of eight underflights of CALIOP during August 2010 by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) to study Saharan dust transported across the Atlantic Ocean. The standard HSRL profile products include aerosol backscatter coefficients and depolarization ratios at both 532 nm and 1064 nm, and aerosol extinction coefficients (and therefore also lidar ratios) at 532 nm only. In this work, we further derive estimates of aerosol lidar ratios and extinction coefficients at 1064 nm via application of a two-wavelength technique that uses the 532 nm aerosol backscatter coefficients and the 1064 nm attenuated total backscatter profile. Summary statistics of the dust lidar ratio and depolarization at 532 nm and 1064 nm from these eight flights are presented. Implications for the CALIOP dust and polluted dust aerosol types and lidar ratio selection are discussed. In addition to the two-wavelength retrievals of lidar ratio at 1064 nm, a demonstration case of a 1064 nm lidar ratio retrieval over the ocean from CALIOP using the CloudSat measurement of surface scattering cross section as a constraint is presented (Josset et al, 2010).

Raymond R Rogers↗
DOE OSTI2021

Macro copper-graphene composites with enhanced electrical conductivity

Composites demonstrating simultaneously enhanced-electrical conductivity, current density and lowered-temperature coefficient of resistance (TCR) compared to copper have been highly sought after for their advantages in efficient energy transport behavior. While such conductors have been demonstrated in 1D (nanowires) and 2D (films) samples, achieving similar behavior in 3D has been challenging owing to the limitations of the synthesis techniques used. In this paper, novel macro-scale 3D copper conductors were demonstrated with simultaneously increased electrical conductivity and decreased temperature coefficient of resistance (TCR) through the addition of graphene. Hot-extrusion was used to manufacture over 1-m-long, 2-mm-diameter copper-graphene composites with varying graphene content and defect density. Results showed that the electrical conductivity and current density in composites with low defect density graphene increased monotonically as a function of graphene content. They also demonstrated a significant decrease of over 17% in TCR with the addition of only 15 ppm graphene along with over 52% improvement in current density. Comparatively composites with high defect density graphene demonstrated lower electrical conductivity and current density. This study provides first-of-its-kind evidence of 3D metal composites whose bulk electrical performance has been enhanced using graphene additive in minute quantities. Further developments in this area are essential to achieve high performance composite conductors that can improve energy transport efficiency and pave way for industrial adoption of such materials in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural Complexity and Tuned Thermoelectric Properties of a Polymorph of the Zintl Phase Ca 2 CdSb 2 with a Non-centrosymmetric Monoclinic Structure

The Zintl phase Ca 2 CdSb 2 was found to be dimorphic. Besides the orthorhombic Ca 2 CdSb 2 (-o), here we report on the synthesis, the structural characterization, and the thermoelectric transport properties of its monoclinic form, Ca 2 CdSb 2 (-m), and its Lu-doped variant Ca 2–x Lu x CdSb 2 (x ≈ 0.02). The monoclinic structure exhibits complex structural characteristics and constitutes a new structure type with the non-centrosymmetric space group Cm (Z = 30). The electrical resistivity ρ(T) measured on single crystals of both phases portrays a transition from a semiconductor to a degenerate p-type semiconductor upon doping with Lu and with an attendant change in the Hall carrier concentration nH from 7.15 × 10 18 to 2.30 × 10 19 cm –3 at 300 K. The Seebeck coefficient S(T) of both phases are comparable and indicate a hole-dominated carrier transport mechanism with magnitudes of 133 and 116 μV/K at 600 K for Ca 2 CdSb 2 (-m) and Ca 2–x Lu x CdSb 2 , respectively. The convoluted atomic bonding with an attendant large unit cell volume of ~4365 Å 3 drives a putative low thermal conductivity in these materials resulting in a power factor PF of 1.63 μW/cm K 2 and an estimated thermoelectric figure of merit zT of ~0.5 for Ca 2–x Lu x CdSb 2 at 600 K. Furthermore, differential scanning calorimetry results reveal the stability of these phases up to about 960 K, making them candidates for moderate temperature thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Expression of interfacial Seebeck coefficient through grain boundary engineering with multi-layer graphene nanoplatelets

Energy filtering has been a long-sought strategy to enhance a thermoelectric material's figure of merit zT through improving its power factor. Here we show a composite of multi-layer graphene nanoplatelets (GNP) and n-type Mg 3 Sb 2 leads to the expression of an energy filtering like effect demonstrated by an increase in the material's Seebeck coefficient and maximum power factor, without impact on the material's carrier concentration. We analyse these findings from the perspective of a heterogeneous material consisting of grain and grain boundary phases, instead of a more traditional and common analysis that assumes a homogeneously transporting medium. An important implication of this treatment is that it leads to the development of an interfacial Seebeck coefficient term, which can explain the observed increase in the material's Seebeck coefficient. The contribution of this interfacial Seebeck coefficient to the overall Seebeck coefficient is determined by the relative temperature drop across the grain boundary region compared to that of the bulk material. In Te doped Mg 3 Sb 2 we show the introduction of GNP increases the interfacial thermal resistance of grain boundaries, enhancing the contribution of the interfacial Seebeck coefficient arising from grain boundaries to the overall Seebeck coefficient. Without significant detriment to the electrical conductivity this effect results in a net increase in maximum power factor. This increased interfacial thermal resistance also leads to the synergistic reduction of the total thermal conductivity. As a result, we enhance zT of the Mg 3 Sb 2 to a peak value of 1.7 near 750 K. Considering the two-dimensional nature of the grain boundary interface, this grain boundary engineering strategy could be applied to a few thermoelectric systems utilizing various two-dimensional nanomaterials.

42 ENGINEERING↗
NASA NTRS1996

Aerodynamic Influence Coefficient Computations Using Euler/Navier-Stokes Equations on Parallel Computers

Modem design requirements for an aircraft push current technologies used in the design process to their limit or sometimes require more advanced technologies to meet the requirement. New design requirements always demand to improve the operational performance. Accurate prediction of aerodynamic coefficients is essential to improve the performance. For example, in the design of an advanced subsonic civil transport, since the fluid flow at transonic regime shows strong nonlinearities, high fidelity equations, such as the Euler or Navier-Stokes equations predict flow characteristics more accurately than the linear aerodynamics, which are widely used in the current design process However, high fidelity flow equations are computationally expensive and require an order of magnitude longer time to obtain aerodynamic coefficients required in the design. Parallel computing is one possibility to cut down the computational turn-around time in using high fidelity equations so that high fidelity equations would be incorporated into the design process. By doing so, high fidelity equations would be used in the routine design process. This work will demonstrate the feasibility of using high fidelity flow equations in a design process by computing aerodynamic influence coefficients of a wing-body-empennage configuration on a multiple-instruction, multiple-data parallel computer.

Byun, Chansup↗
DOE OSTI2021

A chemical kinetics perspective on thermoelectric transport

There is a growing community of chemists and materials scientists exploring thermoelectric properties of organic, polymeric, hybrid, and composite materials. Many of these materials are nondegenerate semiconductors, meaning that the Fermi and transport charge transport energy levels are significantly offset. Others are ionic conductors. While the meaning of the essential parameters electrical conductivity (σ) and Seebeck coefficient (S, the voltage difference per degree of temperature difference) are accessible, the origins of S are not readily apparent to one trained mainly in chemistry. The purpose of this manuscript is to illustrate S as being the result of a steady state difference between concentrations of two designations of charge carriers, those on hotter and those on colder sides of a material sample, analogous to the equilibrium among interconverting chemical species that differ in enthalpy and entropy. The ion-based Seebeck coefficient, also known as the Soret effect, can be explained using principles similar to those applicable to electrons and holes. We hope that this analysis leads to wider understanding of the origins of S through an explanation using the language of chemical kinetics and thermodynamics, and appreciation of ways that thermoelectric efficiency can be enhanced in emerging materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Explaining persistent incomplete mixing in multicomponent reactive transport with Eulerian stochastic model

We present an Eulerian stochastic advection–diffusion–reaction (SADR) model and use it to explain incomplete mixing typically observed in transport experiments with bimolecular reactions. Unlike traditional advection– dispersion–reaction (ADR) models, the SADR model describes mechanical and diffusive mixing as two separate processes. In the SADR model, mechanical mixing is driven by random advective velocity whose variance is given by the coefficient of mechanical dispersion. The diffusive mixing is modeled as a Fickian diffusion process with the effective diffusion coefficient. We demonstrate that the sum of the two coefficients is equal to the dispersion coefficient, but only the effective diffusion coefficient contributes to the mixing-controlled reactions. We use experimental results of Gramling et al. * * to show that for transport and bimolecular reactions in porous media, the SADR model is significantly more accurate than the ADR model, which overestimates the concentration of the reaction product by as much as 60%. We also show that the SADR model predicts an experimentally observed bell- shaped spatial distribution of the reactive product concentration, while the ADR model results in a concentration distribution with an unphysical kink.

Bimolecular reactions, incomplete mixing, Stochast↗
DOE OSTI2026

Effects of Dissolution Regimes on Flow Channelization and Solute Transport in 3D Fracture Networks: Insights From Graph‐Based Reactive Transport Modeling

We investigate how mineral dissolution reshapes flow pathways and solute transport in three‐dimensional discrete fracture networks using a computationally efficient graph‐based reactive transport model. The DFNs are inspired by field‐site observations of fractured carbonate and represent realistic connectivity and structural heterogeneity. Flow is simulated with the Reynolds equation, and dissolution follows first‐order kinetics with diffusive limitations captured through an effective mass‐transfer coefficient. By systematically varying two key dimensionless parameters, the effective Damköhler number (Da), governing reaction versus advection rates, and a transport parameter (Da), analogous to the Thiele modulus, distinct flow channelization regimes emerge: mildly channelized at low G, highly channelized at intermediate Da, and extreme wormhole formation at high Da and low G. Eulerian and Lagrangian analyses, including breakthrough curves, particle tortuosity, dispersivity, and flow channeling indicators quantitatively characterize the progression of dissolution‐driven network restructuring. Across all regimes, initial fracture heterogeneity persists. The results underscore how the interplay between this initial structure, advection, reaction, and diffusion critically shapes subsurface flow pathways, with implications for applications ranging from groundwater remediation to enhanced geothermal systems.

54 ENVIRONMENTAL SCIENCES↗