Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transition state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Diffusion-mediated passing of molecular species in linear nanopores constrained by orientational alignment

For diffusion-mediated catalytic conversion reactions in materials with narrow linear nanopores, e.g., mesoporous silica MCM-41, a key parameter is the propensity for product species to be able to pass reactant species and thus to efficiently exit the pore. For elongated species, this can require orientational alignment with the pore axis. In this work, we perform benchmark analyses for such solution-phase systems where one of these species is elongated in order to quantify the dependence of this passing propensity, P, on pore diameter and on the rotational diffusion coefficient, Dr, of the elongated species. In particular, we consider the passing of a spherical and an elongated spherocylindrical shaped species in a cylindrical pore in an implicit solvent, where these species cannot overlap. Passing is mediated by diffusive Brownian motion of these species as described by strongly damped Langevin dynamics. We quantify scaling of P for pore width just above the threshold where passing is sterically blocked, and also reveal a significant decrease in P for lower Dr. We also consider the dependence of P on the aspect ratio of the elongated species and obtain an exact result in the limiting regime of large aspect ratio.

Brownian motion↗

Controllable strain-driven topological phase transition and dominant surface-state transport in HfTe5

Abstract The fine-tuning of topologically protected states in quantum materials holds great promise for novel electronic devices. However, there are limited methods that allow for the controlled and efficient modulation of the crystal lattice while simultaneously monitoring the changes in the electronic structure within a single sample. Here, we apply significant and controllable strain to high-quality HfTe 5 samples and perform electrical transport measurements to reveal the topological phase transition from a weak topological insulator phase to a strong topological insulator phase. After applying high strain to HfTe 5 and converting it into a strong topological insulator, we found that the resistivity of the sample increased by 190,500% and that the electronic transport was dominated by the topological surface states at cryogenic temperatures. Our results demonstrate the suitability of HfTe 5 as a material for engineering topological properties, with the potential to generalize this approach to study topological phase transitions in van der Waals materials and heterostructures.

36 MATERIALS SCIENCE↗

Isolated [B 2 (CN) 6 ] 2– : Small Yet Exceptionally Stable Nonmetal Dianion

Here, we report the observation of a small, yet remarkably stable, metal-free hexacyanodiborate dianion [B 2 (CN) 6 ] 2– in the gas phase. Negative ion photoelectron spectroscopy (NIPES) was employed to measure its spectra at multiple laser wavelengths, yielding a 1.9 eV electron binding energy (EBE) —a remarkably high value of electronic stability and a ~2.60 eV repulsive Coulomb barrier (RCB) for electron detachment. This rationalizes the observation of this dianion, although homolytic charge-separation dissociation into two [B(CN) 3 ] •– is energetically favorable. Quantum chemical calculations demonstrate a $D_{3d}$ staggered conformation for both the dianion and radical monoanion, and the calculated EBE and RCB match the experimental values well. The simulated density of states spectrum reproduces all measured electronic transitions, while the simulated vibrational progressions for the ground state transition cover a much narrower EBE range compared to the experimental band, indicating appreciable auto-photodetachment via electronically excited dianion resonances

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excited State Phenomena in Correlated Nanostructures: Transition Metal Oxide Clusters and Nanocrystals

The primary goal of our research program was to apply advanced computational techniques to predict electronic properties of molecular species. These include transition metal monoxide and dioxide clusters and negatively charged copper oxide clusters which are important systems for their utilization in a variety of technological applications. The enhanced electron-electron interactions inherent in these systems make it challenging to model their excited state properties within a parameter-free approach. The excited state properties in question include the interaction of light with these molecules which results in ejection of electrons from the system, or the absorption of light by the molecular system resulting in a molecule in a higher-energy state. Our overall goal was to investigate the impact of various computational and theoretical approaches on such electronic and optical excitations in these systems. Comparing several variants of theoretical approaches with available experimental data, and high-level quantum chemistry computations helped us identify the level of theory and approximations that are needed to achieve a reasonable balance between accuracy and computational demand.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cationic and Anionic Redox of Battery Cathodes Investigated by Advanced Synchrotron‐Based Mapping of Resonant Inelastic X‐ray Scattering

Abstract Redox reaction builds the foundation stone for the energy density of rechargeable battery cathodes. Probing and understanding the redox reaction behavior is crucial, but also extremely formidable, which requires individual and reliable detection of cationic and anionic redox states. Fortunately, the recently developed ultra‐high‐efficiency mapping of resonant inelastic X‐ray scattering (mRIXS) has emerged as a powerful tool to probe the battery chemistry states. Here, the latest advances of employing advanced mRIXS is summarized to investigate the cationic and anionic redox mechanism of battery cathodes during electrochemical operation. Owing to the new dimension of information along the emission energy and high sensitivity to valence 3d states, 3d transition‐metal L ‐edge (TM‐ L ) mRIXS can eliminate the lineshape distortion in conventional 3d TM‐ L fluorescence X‐ray absorption spectra and investigate the cationic redox quantitatively. Moreover, O‐ K mRIXS could fingerprint the intrinsic oxidized lattice oxygen states and quantify the oxygen redox (OR) reversibility, thus demystifying the controversy in traditional wisdom. In addition, different modification strategies coupled with underlying mechanisms for regulating the activity and reversibility of OR utilizing mRIXS are also summarized. This review provides valuable guidance for further exploration of underlying reaction mechanisms of battery cathodes by mRIXS, along with both technological and scientific improvements.

Cheng, Chen↗

Theoretical level energies, radiative lifetimes and transitions in W IX

The atomic states of the W IX (W{sup 8+}) tungsten ion lying below the W{sup 9+} ionisation threshold have been studied theoretically, employing the multiconfiguration Dirac–Hartree–Fock method with configuration interaction. The level electronic structures and their energies are presented. The electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) radiative transitions have been computed in order to calculate the radiative lifetimes of given states. Transition wavelengths, energies, and decay rates are also presented for selected high-intensity E1 transitions. The configuration interaction method was applied to estimate electron correlation effects. The aim of the present research was to fill a lack of atomic data for low-charged tungsten ions, which may be useful in low-temperature plasma diagnostics and may form the base for collisional–radiative modelling of spectra for low-charged tungsten ions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shape evolution in even-mass 98-104 Zr isotopes via lifetime measurements using the $\gamma \gamma $-coincidence technique

The Zirconium (Z = 40) isotopic chain has attracted interest for more than four decades. The abrupt lowering of the energy of the first 2 + state and the increase in the transition strength B(E2; 2$^+_1$ →0$^+_1$) going from 98 Zr to 100 Zr has been the first example of “quantum phase transition” in nuclear shapes, which has few equivalents in the nuclear chart. Although a multitude of experiments have been performed to measure nuclear properties related to nuclear shapes and collectivity in the region, none of the measured lifetimes were obtained using the Recoil Distance Doppler Shift method in the γγ-coincidence mode where a gate on the direct feeding transition of the state of interest allows a strict control of systematical errors. Here this work reports the results of lifetime measurements for the first yrast excited states in 98-104 Zr carried out to extract reduced transition probabilities. The new lifetime values in γγ-coincidence and γ-single mode are compared with the results of former experiments. Recent predictions of the Interacting Boson Model with Configuration Mixing, the Symmetry Conserving Configuration Mixing model based on the Hartree–Fock–Bogoliubov approach and the Monte Carlo Shell Model are presented and compared with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electronic Structures of Iron in Oxide Glasses via 1s3p Resonant Inelastic X-ray Scattering

Electronic structures of iron in glasses are essential for unraveling the effect of transition metals on amorphous networks and controlling the electro-optical and transport properties of advanced glasses and amorphous energy-storing materials. The electronic configurations around iron in glasses, however, remain not well understood due to the structural disorders arising from multiple iron species with distinct valence, coordination, and spin states. Here, the first 1s3p resonant inelastic X-ray scattering (RIXS) for oxide glasses identifies hidden electronic configurations for Fe 2+ and Fe 3+ in amorphous networks. The results allow us to quantify the composition-induced evolution of oxygen ligand–field interactions of high-spin Fe 3d states with varying valence and coordination environments in complex glasses. The distinct electronic structures account for the electronic origins of iron-induced changes in the glass properties. The results offer prospects for a simultaneous probing of valence, coordination, and spin states of transition metals in diverse multicomponent oxide glasses and functional amorphous solids via 1s3p RIXS.

Kim, Yong-Hyun [Seoul National Univ. (Korea, Repub↗

BMINN: Learning chemical potentials and parameters from voltage data for multi-phase battery modeling

Free-energy landscapes and chemical potentials govern the dynamics of phase transitions, transport, and stability in functional materials, yet they remain experimentally inaccessible under realistic operating conditions. Here we introduce a Bayesian model-integrated neural network (BMINN) that embeds physics-based formulations of non-autonomous partial differential-algebraic equations into probabilistic learning. This approach reconstructs hidden thermodynamics directly from macroscopic current-voltage data, providing quantitative access to metastable states, staging transitions, and energy barriers without synchrotron probes. Demonstrated on lithium-graphite electrodes, BMINN recovers full Gibbs free-energy landscapes with fidelity validated against operando X-ray diffraction. The framework generalizes across dynamical regimes, enabling accurate voltage prediction, internal state estimation, and inference of governing parameters. Beyond batteries, BMINN exemplifies a broadly applicable strategy for learning missing physics in multiphase, non-equilibrium systems, offering a new pathway to uncover hidden thermodynamic functions across condensed matter and materials physics.

25 ENERGY STORAGE↗

State-selective probing of CO 2 autoionizing inner valence Rydberg states with attosecond extreme ultraviolet four-wave-mixing spectroscopy

Nonlinear spectroscopies can disentangle spectra that are congested due to inhomogeneous broadening. Here, in conjunction with theoretical calculations, attosecond extreme ultraviolet (XUV) four-wave-mixing (FWM) spectroscopy is utilized to probe the dynamics of autoionizing inner valence excited Rydberg states of the polyatomic molecule, CO 2 . This tabletop nonlinear technique employs a short attosecond XUV pulse train and two noncollinear, few-cycle near-infrared pulses to generate background-free XUV wave-mixing signals. FWM emission is observed from the n=5-7 states of the Henning sharp ndσ g Rydberg series that converges to the ionic $\widetilde{B}$ 2 Σ$^{+}_{u}$ state. However, these transient emission signals decay with lifetimes of 33 ± 6, 53 ± 2, and 94 ± 2 fs, respectively, which calculations show are consistent with the lifetimes of the short-lived n=6-8 members of the nsσ g character Henning diffuse Rydberg series. The oscillator strengths of transitions between states involved in all possible resonant FWM processes are calculated, verifying that the nonlinear spectra are dominated by pathways described by an initial excitation to the diffuse nsσ g Rydberg series and emission from the sharp ndσ g Rydberg series. The results substantiate not only that attosecond XUV FWM spectroscopy produces rigorous and meaningful measurements of ultrafast dynamics in polyatomic systems, but also that nonlinear spectroscopic techniques are versatile tools to selectively probe dynamics that are otherwise difficult to access.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transitions To Two-Hadron States From Quantum Chromodynamics

The rich spectrum of hadrons reflects the complexity of interactions between the quarks and gluons confined within them. Most of these hadrons are extremely short-lived and are called resonances. Experimentally, they are observed indirectly through their effects on the energy distribution in scattering experiments. Additionally, the non-perturbative nature of Quantum Chromodynamics (QCD), which governs the dynamics of quarks and gluons, prevents the implementation of known analytical techniques for calculating transition and interaction rates between hadrons. Lattice QCD (LQCD), a numerical implementation of QCD, provides a non-perturbative approach to studying the spectrum, as long as we understand how to account for finite-volume and imaginary-time effects in our calculations. In this dissertation, we present two main results. First, the formalism for extracting the elastic form factors of resonances from LQCD, which is necessary to understand their internal structure. Second, we perform the first numerical calculation of a coupled-channel transition, the timelike form factor of the pion, extending into the inelastic region above the kaon-antikaon threshold, as well as its connection to the spacelike region. These developments open the door for future calculations that explore the non-trivial internal structure of QCD resonances.

Gama, Felipe Ortega↗

Rotational Modulation of à 2 A State Photodissociation of HCO via Renner-Teller Nonadiabatic Transitions

By examining the product-state distribution of a prototypical non- adiabatic predissociation system, HCO($Ã^2A''–\tilde X^2A'$), we demonstrate here that the dissociation dynamics is strongly modulated by parent rotational quantum numbers. The predissociation of the nominal ($ν_{\text{C–H}} = 0, ν_{\text{bend}}, ν_{\text{C–O}} = 1$) vibronic levels of the $AÃ^2A''$ state surprisingly gives rise to both vibrational ground and excited states of the CO product, despite the assumed spectator nature of the CO moiety. This anomaly is attributed to the dependence of the lifetime of the vibronic resonance facilitated by the Renner–Teller interaction on the parent rotational angular momentum quantum numbers coupled with transient intensity borrowing from nearby vibronic resonances with $ν_{\text{C–O}} = 0$. This unique phenomenon is a purely quantum mechanical behavior that has no classical analogue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Competing Line-broadening Mechanisms in Neutron Star Atmospheres: Interference between Motional Stark and Ion Broadening

Neutron star surfaces have extremely high magnetic fields. In the atmosphere, the broadening of spectral lines will be substantial from the dense plasma as well as from the magnetic field. One broadening mechanism of note is due to the motional Stark effect (MSE)—an additional electric field that arises from the motion of the atom in the magnetic field. However, approximate formulae are often used to construct atmosphere models, and the MSE is assumed to be the dominant line-broadening mechanism even in ions. Detailed pressure-broadening models in these extreme magnetic fields are now currently being developed. In these more detailed models, it was suggested that the MSE may not be as large as previously predicted. If correct, this hypothesis implies that neutron star line widths might be dominated by pressure broadening rather than by motional Stark broadening. We find that, in the absence of plasma perturbations, for typical magnetic fields (B = 10 12 G), mid-Z elements, such as oxygen, have motional Stark widths of order 1 eV for transitions between dipole-allowed transitions from the ground state, though higher temperatures and transitions to higher-energy states are expected to have more broadening. The MSE also breaks down selection rules, giving rise to forbidden transitions, which have much larger widths. When plasma perturbations are included, we find that the plasma perturbation and motional Stark processes are not independent and, as a result, the spectral lines become narrow in a nontrivial way and display harmonics of the ion cyclotron frequency.

74 ATOMIC AND MOLECULAR PHYSICS↗

Unveiling the parasitic-reaction-driven surface reconstruction in Ni-rich cathode and the electrochemical role of Li 2 CO 3

Nickel-rich transition-metal oxides are widely regarded as promising cathode materials for high-energy-density lithium-ion batteries for emerging electric vehicles. However, achieving high energy density in Ni-rich cathodes is accompanied by substantial safety and cycle-life obstacles. The major issues of Ni-rich cathodes at high working potentials are originated from the unstable cathode-electrolyte interface, while the underlying mechanism of parasitic reactions towards surface reconstructions of cathode materials is not well understood. In this work, we controlled the Li 2 CO 3 impurity content on LiNi 0.83 Mn 0.1 Co 0.07 O 2 cathodes using air, tank-air, and O 2 synthesis environments. Home-built high-precision leakage current and on-line electrochemical mass spectroscopy experiments verify that Li 2 CO 3 impurity is a significant promoter of parasitic reactions on Ni-rich cathodes. The rate of parasitic reactions is strongly correlated to Li 2 CO 3 content and severe performance deterioration of Ni83 cathodes. The post-mortem characterizations via high-resolution transition electron microscope and X-ray photoelectron spectroscopy depth profiles reveal that parasitic reactions promote more Ni reduction and O deficiency and even rock-salt phase transformation at the surface of cathode materials. Here, our observation suggests that surface reconstructions have a strong affiliation to parasitic reactions that create chemically acidic environment to etch away the lattice oxygen and offer the electrical charge to reduce the valence state of transition metal. Thus, this study advances our understanding on surface reconstructions of Ni-rich cathodes and prepares us for searching for rational strategies.

36 MATERIALS SCIENCE↗

Hot and dense quark-gluon plasma thermodynamics from holographic black holes

We present new results on the equation of state and transition line of hot and dense strongly interacting QCD matter, obtained from a bottom-up Einstein-Maxwell-Dilaton holographic model. We considerably expand the previous coverage in baryon densities in this model by implementing new numerical methods to map the holographic black hole solutions onto the QCD phase diagram. We are also able to obtain, for the first time, the first-order phase transition line in a wide region of the phase diagram. Comparisons with the most recent lattice results for the QCD thermodynamics are also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electrolyte Vapor Induced Passivation and Transition Metal Redox on Electrode Active Materials

The gaseous environment that battery electrodes are exposed to is critical to their electrochemical performance, and yet, the impact of vapor-phase components in the glovebox is relatively unexplored. In this study, we examine how the surface of Li 4 Ti 5 O 12 and LiFePO 4 composite electrodes evolve upon exposure to 1 M LiPF 6 in ethylene carbonate:dimethyl carbonate electrolyte vapors in an argon-filled glovebox. Spatially resolved X-ray photoemission electron microscopy and X-ray photoelectron spectroscopy reveal that even brief (15 minutes) contact with electrolyte vapor initiates the formation of a LiF film and changes the oxidation state of transition metals at the particle surface. Notably, these modifications occur selectively on active material particles and not on binder or conductive carbon, underscoring the specificity of vapor-induced reactions. Prolonged exposure to electrolyte vapor over the course of 1 week yields thicker, more chemically complex interphases containing both LiF and lithium oxyfluorophosphate species (Li x PO y F z ). Subsequent electrochemical testing shows that vapor-induced passivation layers influence first cycle capacities, lithium (de)insertion overpotentials, and charge-transfer resistance values. In conclusion, these results indicate that vapor–electrode interactions may be a source of variability in electrochemical behavior over time and suggest that other, more reactive electrode materials may also be susceptible to interactions with electrolyte vapor.

36 MATERIALS SCIENCE↗

Reliability Analysis of Power Grids Considering Component Failures of Variable Energy Resources

This paper proposes an improved model for the reliability assessment of power systems considering component failures of variable energy resources (VER). The inherent intermittency of VER such as solar photovoltaic (PV) and wind farms, along with their susceptibility to component failures, present significant challenges to reliable system operation. These issues, combined with power grid operation and network constraints, complicate the reliable operation of VER-integrated power systems. Here, to address these concerns, this paper introduces a reliability assessment framework that considers VER input variability, its impact on component availability, and their resulting impact on overall system reliability. Stochastic models based on discrete Markov processes are developed to incorporate variable irradiance, wind speeds, and their effects on PV and wind component failure rates. A next-event and state transition-based approach is then developed to integrate the stochastic models into a mixed-timing sequential Monte Carlo simulation framework for composite reliability assessment. Case studies on the RTS-GMLC system demonstrate the effectiveness of the proposed model in evaluating the reliability of VER-integrated systems.

Pandit, Dilip [Sandia National Laboratories (SNL-N↗

Bi-directional tuning of thermal transport in SrCoO x with electrochemically induced phase transitions

Unlike the wide-ranging dynamic control of electrical conductivity, there does not exist an analogous ability to tune thermal conductivity by means of electric potential. The traditional picture assumes that atoms inserted into a material’s lattice act purely as a source of scattering for thermal carriers, which can only reduce thermal conductivity. In contrast, here we show that the electrochemical control of oxygen and proton concentration in an oxide provides a new ability to bi-directionally control thermal conductivity. On electrochemically oxygenating the brownmillerite SrCoO 2.5 to the perovskite SrCoO 3–δ , the thermal conductivity increases by a factor of 2.5, whereas protonating it to form hydrogenated SrCoO 2.5 effectively reduces the thermal conductivity by a factor of four. This bi-directional tuning of thermal conductivity across a nearly 10 ± 4-fold range at room temperature is achieved by using ionic liquid gating to trigger the ‘tri-state’ phase transitions in a single device. We elucidated the effects of these anionic and cationic species, and the resultant changes in lattice constants and lattice symmetry on thermal conductivity by combining chemical and structural information from X-ray absorption spectroscopy with thermoreflectance thermal conductivity measurements and ab initio calculations. This ability to control multiple ion types, multiple phase transitions and electronic conductivity that spans metallic through to insulating behaviour in oxides by electrical means provides a new framework for tuning thermal transport over a wide range.

36 MATERIALS SCIENCE↗