Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Overcoming low EIA performance - A diagnostic tool for the deliberate development of EIA system capacities in low and middle income countries

Highlights: • A tool for rapid assessment of EIA performance is presented. • The tool focusses on EIA systems in low and middle income countries. • This tool aims to enhance the capacities of the main EIA organizations. • Mechanisms are identified to maintain and further develop the enhanced capacities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An integrated modeling and design tool for advanced optical spacecraft

Consideration is given to the design and status of the Integrated Modeling of Optical Systems (IMOS) tool and to critical design issues. A multidisciplinary spacecraft design and analysis tool with support for structural dynamics, controls, thermal analysis, and optics, IMOS provides rapid and accurate end-to-end performance analysis, simulations, and optimization of advanced space-based optical systems. The requirements for IMOS-supported numerical arrays, user defined data structures, and a hierarchical data base are outlined, and initial experience with the tool is summarized. A simulation of a flexible telescope illustrates the integrated nature of the tools.

Briggs, Hugh C.↗

Tool and data interoperability in the SSE system

Information is given in viewgraph form on tool and data interoperability in the Software Support Environment (SSE). Information is given on industry problems, SSE system interoperability issues, SSE solutions to tool and data interoperability, and attainment of heterogeneous tool/data interoperability.

Shotton, Chuck↗

Monitoring Building Systems for Schedule Compliance

As Pacific Northwest National Laboratory (PNNL) initiated a Core Business Hours program, it became a challenge to ensure that the hundreds of systems campus wide were operating within their programmed schedules. Therefore, a collaborative exchange between PNNL operations and PNNL researchers developing the Decision Support for Operations and Maintenance (DSOM) software package was initiated to create a tool to solve this problem. This new DSOM tool verifies systems are operating within scheduled operation times by polling Building Automation and Control Network (BACnet) identifiers of systems’ on/off or command statuses. The tool records the time spent in operation state (ON) and totalizes each system over a rolling 7-day period, highlighting systems that are running over the scheduled hours. This snapshot view allows building management to look quickly at the entire campus to ensure that systems are not operating beyond their scheduled hours.

Jensen, Andrew M.↗

Sliding Mode Network Perimeter Control

Urban traffic congestion is a chronic problem faced by many cities in the US and worldwide. It results in inefficient infrastructure use as well as increased vehicle fuel consumption and emission levels. Congestion is intertwined with delay, as road users waste precious hours on the road, which in turn reduces productivity. Researchers have developed, and continue to design, tools and systems to alleviate this problem. Network perimeter control is one such tool that has been studied extensively. It attempts to control the flow of vehicles entering a protected area to ensure that the congested regime predetermined by the Network Fundamental Diagram (NFD) is not reached. In this paper, a method derived from sliding mode control theory is presented. Its main advantages over proportional-integral controllers include (1) minimal tuning, (2) no linearization of the governing equations, (3) no assumptions with regard to the shape of the NFD, and (4) ability to handle various demand profiles without the need to retune the controller. A sliding mode controller was implemented and tested on a congested grid network. The results show that the proposed controller produces network-wide delay savings and disperses congestion effectively.

42 ENGINEERING↗

The Thermococcales as a model system: historical perspectives and emerging tools

Thermococcales are among the most widely studied hyperthermophilic Archaea and have become key models for understanding life at extreme temperatures. Early work in the 1980s culminated in the isolation of novel Thermococcales species from hydrothermal vents that grew rapidly, tolerated extreme heat, and metabolized diverse substrates, making them uniquely amenable for laboratory studies. Their thermostable enzymes and emerging genetic tools facilitated detailed investigations of core processes such as DNA replication, repair, and transcription under conditions that challenge most life forms. These practical advantages, together with the accumulation of tools and protocols, cemented the role of Thermococcales as a model system. Here, we recount how chance discoveries, environmental adaptations, and experimental practicality intersected to establish Thermococcales as a central model for studying archaeal biology and extremophile physiology.

59 BASIC BIOLOGICAL SCIENCES↗

Resilience Development For Electric Energy Delivery Systems

The Resilience Development for Electric Energy Delivery Systems (ResDEEDS) tool walks users through the process of evaluating electric energy delivery systems (EEDS) for resiliency. It implements the steps of the INL Resilience Framework for EEDS and provides automated tracking of resilience planning and suggestions for mitigating hazards.

Culler, MeganJ.↗

Genomes to ecosystem function: Targeting critical knowledge gaps in methanogenesis and translation to updated global biogeochemical models

Natural freshwater temperate wetland systems currently represent the largest natural source of atmospheric methane, but are relatively understudied using systems biology tools (e.g. meta-omics) compared to other high producing methane systems (e.g. peat, tropical, or reconstructed wetlands). Using field investigations at the NOAA operated sentinel site on Lake Erie, methane producing activities and responses to geochemical conditions will be determined along seasonal and spatial gradients (Objective 1). Here, a combination of high-throughput activity and gas measurements, combined with high-resolution systems biology and analytical methods, will provide in depth knowledge of the microbiological, chemical, and physical constraints on methane production in wetlands. Using laboratory microcosms, the formation of anoxic microsites and their capacity to facilitate methane production in wetland soils will be simulated (Objective 2). This objective will validate the findings from the field investigations, offering a more controlled environment for teasing out the role of different yet interrelated variables. Lastly, these field and laboratory data will be used for multi-scale, process-level evaluation of an ecosystem biogeochemical model that accommodates these newly identified processes and parameterizes representation of these processes along relevant environmental gradients (Objective 3).This research will identify multiple interacting geochemical, ecological, and metabolic constraints that are poorly understood, oversimplified, or missing in global biogeochemical methane models. This proposal targets the role of oxygen limitation on methane processes in soil domains, to improve reactive transport models of microbial carbon cycling across terrestrial-aquatic soils and generate data on nutrient cycling activities in Great Lake wetlands. This information could provide new insights into the microbial controllers of Lake Erie eutrophication.

59 BASIC BIOLOGICAL SCIENCES↗

Verification of a Multiphysics Toolkit against the Magnetized Target Fusion Concept

In the spring of 2004 the Advanced Concepts team at MSFC embarked on an ambitious project to develop a suite of modeling routines that would interact with one another. The tools would each numerically model a portion of any advanced propulsion system. The tools were divided by physics categories, hence the name multiphysics toolset. Currently most of the anticipated modeling tools have been created and integrated. Results are given in this paper for both a quarter nozzle with chemically reacting flow and the interaction of two plasma jets representative of a Magnetized Target Fusion device. The results have not been calibrated against real data as of yet, but this paper demonstrates the current capability of the multiphysics tool and planned future enhancements

Thomas, Scott↗

JPL/NASA/IEEE Test Effectiveness Workshop

(none given)From OBJECTIVES: Specific objectives of the working group are to support the innovation, development, evaluation and implementation of test methods, metrics and tools based on failure engineering/physics and/or root cause evaluations. Data sources systems and tools shall be developed and implemented that: 1) provide improved preventions, controls, analyses and tests (PACT) & field failure data collection, 2) facilities data analysis, archiving, retrieval, failure physics and/or root cause evaluations and 3) enable new and existing technology suitability evaluations to be performed.

effectiveness concurrent engineering metrics test ↗

Advanced Flow Control as a Management Tool in the National Airspace System

Advanced Flow Control is closely related to Air Traffic Control. Air Traffic Control is the business of the Federal Aviation Administration. To formulate an understanding of advanced flow control and its use as a management tool in the National Airspace System, it becomes necessary to speak somewhat of air traffic control, the role of FAA, and their relationship to advanced flow control. Also, this should dispell forever, any notion that advanced flow control is the inspirational master valve scheme to be used on the Alaskan Oil Pipeline.

Wugalter, S.↗

NASA System-Level Design, Analysis and Simulation Tools Research on NextGen

A review of the research accomplished in 2009 in the System-Level Design, Analysis and Simulation Tools (SLDAST) of the NASA's Airspace Systems Program is presented. This research thrust focuses on the integrated system-level assessment of component level innovations, concepts and technologies of the Next Generation Air Traffic System (NextGen) under research in the ASP program to enable the development of revolutionary improvements and modernization of the National Airspace System. The review includes the accomplishments on baseline research and the advancements on design studies and system-level assessment, including the cluster analysis as an annualization standard of the air traffic in the U.S. National Airspace, and the ACES-Air MIDAS integration for human-in-the-loop analyzes within the NAS air traffic simulation.

Bardina, Jorge↗

Procedures and tools for building large Ada systems

Some of the problems unique to building a very large Ada system are addressed. This is done through examples from experience. In the winter of 1985 and 1986, Intermetrics bootstrapped the Ada compiler, which was being built over the last few years. This system consists of about one million lines of full Ada. Over the last few years a number of procedures and tools were adopted for managing the life cycle of each of the many parts of an Ada system. Many of these procedures are well known to most system builders: release management, quality assurance testing; and source file revision control. Others are unique to working in an Ada language environment; i.e., recompilation management, Ada program library management, and managing multiple implementations. First a look is taken at how a large Ada system is broken down into pieces. The Ada definition leaves unspecified a number of issues that the system builder must address: versions, subsystems, multiple implementations, and synchronization of branched development paths. Having introduced how the Ada systems are decomposed, a look is taken, via a series of examples, at how the life cylces of those parts is managed. The procedures and tools used to manage the evolution of the system are examined. It is hoped that other Ada system builders can build upon the experience of the last few years.

Hyde, Ben↗

Using generic tool kits to build intelligent systems

The Intelligent Systems and Robots Center at Sandia National Laboratories is developing technologies for the automation of processes associated with environmental remediation and information-driven manufacturing. These technologies, which focus on automated planning and programming and sensor-based and model-based control, are used to build intelligent systems which are able to generate plans of action, program the necessary devices, and use sensors to react to changes in the environment. By automating tasks through the use of programmable devices tied to computer models which are augmented by sensing, requirements for faster, safer, and cheaper systems are being satisfied. However, because of the need for rapid cost-effect prototyping and multi-laboratory teaming, it is also necessary to define a consistent approach to the construction of controllers for such systems. As a result, the Generic Intelligent System Controller (GISC) concept has been developed. This concept promotes the philosophy of producing generic tool kits which can be used and reused to build intelligent control systems.

Miller, David J.↗

Update on Parallel Process Execution in the Next Generation System Analysis Model

As of the end of 2021, 88,880 metric tons of heavy metal (MTHM) (44,741 MTHM in dry storage; 44,139 MTHM in wet storage) of spent nuclear fuel (SNF) were stored at various reactor sites across the United States [1]. The Office of Storage and Transportation in the Department of Energy is planning for the transportation, storage, and eventual disposal of SNF and high-level radioactive waste (HLW). To aid in this effort and inform decision-makers about the backend of the spent fuel cycle, systems analysis tools capable of analyzing the various options with respect to SNF and HLW management are being used as well as continuously improved to meet the evolving needs of the program. System analysts typically use these tools to vary underlying assumptions (shipping rates, allocation priority, available facilities, start dates, etc.) and study the implications of these changes on site clearance schedules, campaign costs, transportation infrastructure acquisition, etc.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Inductive knowledge acquisition experience with commercial tools for space shuttle main engine testing

Since 1984, an effort has been underway at Rocketdyne, manufacturer of the Space Shuttle Main Engine (SSME), to automate much of the analysis procedure conducted after engine test firings. Previously published articles at national and international conferences have contained the context of and justification for this effort. Here, progress is reported in building the full system, including the extensions of integrating large databases with the system, known as Scotty. Inductive knowledge acquisition has proven itself to be a key factor in the success of Scotty. The combination of a powerful inductive expert system building tool (ExTran), a relational data base management system (Reliance), and software engineering principles and Computer-Assisted Software Engineering (CASE) tools makes for a practical, useful and state-of-the-art application of an expert system.

Modesitt, Kenneth L.↗

2009 DOE-EM LONG-TERM MONITORING TECHNICAL FORUM SUMMARY REPORT

The U. S. Department of Energy's (DOE) Office of Environmental Management (EM) has the responsibility for cleaning up 60 sites in 22 states that were associated with the legacy of the nation's nuclear weapons program and other research and development activities. These sites are unique and many of the technologies needed to successfully disposition the associated wastes have yet to be developed or would require significant re-engineering to be adapted for future EM cleanup efforts. In 2008, the DOE-EM Engineering and Technology Program (EM-22) released the Engineering and Technology Roadmap in response to Congressional direction and the need to focus on longer term activities required for the completion of the aforementioned cleanup program. One of the strategic initiatives included in the Roadmap was to enhance long term performance monitoring as defined by 'Develop and deploy cost effective long-term strategies and technologies to monitor closure sites (including soil, groundwater, and surface water) with multiple contaminants (organics, metals and radionuclides) to verify integrated long-term cleanup performance'. To support this long-term monitoring (LTM) strategic initiative, EM 22 and the Savannah River National Laboratory (SRNL) organized and held an interactive symposia, known as the 2009 DOE-EM Long-Term Monitoring Technical Forum, to define and prioritize LTM improvement strategies and products that could be realized within a 3 to 5 year investment time frame. This near-term focus on fundamental research would then be used as a foundation for development of applied programs to improve the closure and long-term performance of EM's legacy waste sites. The Technical Forum was held in Atlanta, GA on February 11-12, 2009, and attended by 57 professionals with a focus on identifying those areas of opportunity that would most effectively advance the transition of the current practices to a more effective strategy for the LTM paradigm. The meeting format encompassed three break-out sessions, which focused on needs and opportunities associated with the following LTM technical areas: (1) Performance Monitoring Tools, (2) Systems, and (3) Information Management. The specific objectives of the Technical Forum were to identify: (1) technical targets for reducing EM costs for life-cycle monitoring; (2) cost-effective approaches and tools to support the transition from active to passive remedies at EM waste sites; and (3) specific goals and objectives associated with the lifecycle monitoring initiatives outlined within the Roadmap. The first Breakout Session on LTM performance measurement tools focused on the integration and improvement of LTM performance measurement and monitoring tools that deal with parameters such as ecosystems, boundary conditions, geophysics, remote sensing, biomarkers, ecological indicators and other types of data used in LTM configurations. Although specific tools were discussed, it was recognized that the Breakout Session could not comprehensively discuss all monitoring technologies in the time provided. Attendees provided key references where other organizations have assessed monitoring tools. Three investment sectors were developed in this Breakout Session. The second Breakout Session was on LTM systems. The focus of this session was to identify new and inventive LTM systems addressing the framework for interactive parameters such as infrastructure, sensors, diagnostic features, field screening tools, state of the art characterization monitoring systems/concepts, and ecosystem approaches to site conditions and evolution. LTM systems consist of the combination of data acquisition and management efforts, data processing and analysis efforts and reporting tools. The objective of the LTM systems workgroup was to provide a vision and path towards novel and innovative LTM systems, which should be able to provide relevant, actionable information on system performance in a cost-effective manner. Two investment sectors were developed in this Breakout Session. The last Breakout Session of the Technical Forum was on LTM information management. The session focus was on the development and implementation of novel information management systems for LTM including techniques to address data issues such as: efficient management of large and diverse datasets; consistency and comparability in data management and incorporation of accurate historical information; data interpretation and information synthesis including statistical methods, modeling, and visualization; and linage of data to site management objectives and leveraging information to forge consensus among stakeholders. One investment sector was developed in this Breakout Session.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗