Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superfluid density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

High energy gain in three-dimensional simulations of light sail acceleration

The dynamics of radiation pressure acceleration in the relativistic light sail regime are analysed by means of large scale, three-dimensional (3D) particle-in-cell simulations. Differently to other mechanisms, the 3D dynamics leads to faster and higher energy gain than in 1D or 2D geometry. This effect is caused by the local decrease of the target density due to transverse expansion leading to a “lighter sail.” However, the rarefaction of the target leads to an earlier transition to transparency limiting the energy gain. A transverse instability leads to a structured and inhomogeneous ion distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Predicting a quaternary tungsten oxide for sustainable photovoltaic application by density functional theory

A quaternary oxide, CuSnW{sub 2}O{sub 8} (CTTO), has been predicted by density functional theory (DFT) to be a suitable material for sustainable photovoltaic applications. CTTO possesses band gaps of 1.25 eV (indirect) and 1.37 eV (direct), which were evaluated using the hybrid functional (HSE06) as a post-DFT method. The hole mobility of CTTO was higher than that of silicon. Further, optical absorption calculations demonstrate that CTTO is a better absorber of sunlight than Cu{sub 2}ZnSnS{sub 4} and CuIn{sub x}Ga{sub 1−x}Se{sub 2} (x = 0.5). In addition, CTTO exhibits rigorous thermodynamic stability comparable to WO{sub 3}, as investigated by different thermodynamic approaches such as bonding cohesion, fragmentation tendency, and chemical potential analysis. Chemical potential analysis further revealed that CTTO can be synthesized at flexible experimental growth conditions, although the co-existence of at least one secondary phase is likely. Finally, like other Cu-based compounds, the formation of Cu vacancies is highly probable, even at Cu-rich growth condition, which could introduce p-type activity in CTTO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structures of diamond-like phases

The diamond-like phases containing carbon atoms with the same degree of hybridization, which is close to sp{sup 3}, are classified. It is found that twenty such phases can exist, and ten of them are described for the first time. Molecular mechanics and semi-empirical quantum-mechanical methods are used to calculate the geometrically optimized structures of diamond-like phase clusters and to determine their structural parameters and properties, such as the density, the bulk modulus, and the sublimation energy. The difference between the properties of the diamond-like phases and those of diamond is found to be determined by the difference between the structures of these phases and diamond.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of integrated thyristor switching-off by a reverse gate pulse current

To increase the maximum power current density of an integrated n{sup +}p'Nn'p{sup +}-type thyristor during switching-off by a current pulse in the control circuit, the injection of electrons from the n{sup +} emitter should be interrupted before the recovery of the collector p'N junction. This has been done using a rapidly increasing reverse gate current pulse with an amplitude equal to the amplitude of the power switched-off current. After the interruption of the emitter injection, the remaining current through the device is the current of holes extracted from the collector region via the gate electrode. Like in insulated gate bipolar transistors (IGBTs), the physical mechanism that limits the maximum density of the switch-off current is the dynamic avalanche breakdown, which is initiated by the holes extracted through the space charge region of the collector p'N junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High power impulse magnetron sputtering using a rotating cylindrical magnetron

Both the industrially favorable deposition technique, high power impulse magnetron sputtering (HIPIMS), and the industrially popular rotating cylindrical magnetron have been successfully combined. A stable operation without arcing, leaks, or other complications for the rotatable magnetron was attained, with current densities around 11 A cm{sup -2}. For Ti and Al, a much higher degree in ionization in the plasma region was observed for the HIPIMS mode compared to the direct current mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and transport properties of dense liquid silica

Using density-functional-theory based molecular dynamics and the Kubo-Greenwood linear response theory, we evaluated the high-pressure equation of state and the optical and transport properties of quartz and fused silica shock-compressed to 2000 GPa. The computed Hugoniots and corresponding optical reflectivity values are in very good agreement with published data for quartz, and new data that we obtained on fused silica using magnetically launched flyer plate experiments. The rise of optical reflectivity upon shock compression appears to be primarily a temperature-driven mechanism, which is relatively insensitive to small density variation. We observed that the electrical conductivity does not display Drude-like frequency dependence, especially at lower temperatures. In addition, the Wiedemann-Franz relation between electrical and thermal conductivities was found to be invalid. It suggests that even at three-fold compression, warm dense liquid silica on the Hugoniot curve is still far away from the degenerate limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons

Thin LiF interlayers are typically used in organic light-emitting diodes to enhance the electron injection. Here, we show that the effective work function of a contact with a LiF interlayer can be either raised or lowered depending on the history of the applied bias. Formation of quasi-Ohmic contacts for both electrons and holes is demonstrated by electroluminescence from symmetric LiF/polymer/LiF diodes in both bias polarities. The origin of the dynamic switching is charging of electrically induced Frenkel defects. The current density–electroluminescence–voltage characteristics can qualitatively be explained. The interpretation is corroborated by unipolar memristive switching and by bias dependent reflection measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulation of transport hysteresis on graphene field effect transistors with Ga ion irradiation

We have studied the effect of Ga ion irradiation on the controllable hysteretic behavior of graphene field effect transistors fabricated on Si/SO{sub 2} substrates. The various densities of defects in graphene were monitored by Raman spectrum. It was found that the Dirac point shifted to the positive gate voltage constantly, while the hysteretic behavior was enhanced first and then weakened, with the dose of ion irradiation increasing. By contrasting the trap charges density induced by dopant and the total density of effective trap charges, it demonstrated that adsorbate doping was not the decisive factor that induced the hysteretic behavior. The tunneling between the defect sites induced by ion irradiation was also an important cause for the hysteresis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the ideality factor of the radiative recombination current in semiconductor light-emitting diodes

While there have been many discussions on the standard Si pn-diodes, little attention has been paid and confusion still arises on the ideality factor of the radiative recombination current in semiconductor light-emitting diodes (LEDs). In this letter, we theoretically demonstrate and experimentally confirm by using blue and infrared semiconductor LEDs that the ideality factor of the radiative recombination current is unity especially for low-current-density ranges. We utilize the data of internal quantum efficiency measured by the temperature-dependent electroluminescence to separate the radiative current component from the total current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge density wave modulation in superconducting BaPb O 3 / BaBi O 3 superlattices

The isotropic, nonmagnetic doped BaBiO 3 superconductors maintain some similarities to high-T c cuprates, while also providing a cleaner system for isolating charge density wave (CDW) physics that commonly competes with superconductivity. Artificial layered superlattices offer the possibility of engineering the interaction between superconductivity and CDW. Here we stabilize a low-temperature, fluctuating short-range CDW order by using artificially layered epitaxial (BaPbO 3 ) 3m /(BaBiO 3 ) m (m = 1-10 unit cells) superlattices that are not present in the optimally doped BaPb 0.75 Bi 0.25 O 3 alloy with the same overall chemical formula. Charge transfer from BaBiO 3 to BaPbO 3 effectively dopes the former and suppresses the long-range CDW; however, as the short-range CDW fluctuations strengthen at low temperatures charge appears to localize and superconductivity is weakened. The monolayer structural control demonstrated here provides compelling implications to access controllable, local density wave orders absent in bulk alloys and manipulate phase competition in unconventional superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of Ga-GaN system: Transition from adsorbed metal atoms to a metal–semiconductor junction

Ab initio studies of a GaN(0001)-Ga system with various thicknesses of a metallic Ga layer were undertaken. The studied systems extend from a GaN(0001) surface with a fractional coverage of gallium atoms to a Ga-GaN metal–semiconductor (m–s) contact. Electronic properties of the system are simulated using density functional theory calculations for different doping of the bulk semiconductor. It is shown that during transition from a bare GaN(0001) surface to a m–s heterostructure, the Fermi level stays pinned at a Ga-broken bond highly dispersive surface state to Ga–Ga states at the m–s interface. Adsorption of gallium leads to an energy gain of about 4 eV for a clean GaN(0001) surface and the energy decreases to 3.2 eV for a thickly Ga-covered surface. The transition to the m–s interface is observed. For a thick Ga overlayer such interface corresponds to a Schottky contact with a barrier equal to 0.9 and 0.6 eV for n- and p-type, respectively. Bond polarization-related dipole layer occurring due to an electron transfer to the metal leads to a potential energy jump of 1.5 eV, independent on the semiconductor doping. Additionally high electron density in the Ga–Ga bond region leads to an energy barrier about 1.2 eV high and 4 Å wide. This feature may adversely affect the conductivity of the n-type m–s system.

42 ENGINEERING↗

Temperature Dependence of Renormalized Spin Susceptibility for Interacting 2D Electrons in Silicon

By using Shubnikov-de Haas oscillations in crossed magnetic fields, we measured the temperature dependence of the renormalized spin susceptibility χ{sub i}{sup ∗}(T) for strongly interacting itinerant 2D electrons in silicon. The weak δχ{sub i}{sup ∗}(T) dependence, only a few percent over the range T = (0.1 − 1) K, agrees qualitatively with the predicted interaction corrections. However, in strong in-plane magnetic fields, the χ{sup ∗}(T) dependence does not vanish or weaken as expected for the interaction corrections. We found that the susceptibility variations are correlated with the T-dependence of the density of itinerant electrons extracted from the magnetooscillation period. We conclude therefore that the χ{sub i}{sup ∗}(T) dependence is affected by a T-dependent exchange of electrons between the subsystems of itinerant and localized electrons which are in thermodynamic equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of low-divergence megaelectronvolt ion beams from thin foil irradiated with an ultrahigh-contrast laser

Megaelectronvolt (MeV) ion beams with low divergence (10 Degree-Sign ) are experimentally generated from a thin foil irradiated by an ultrahigh-contrast laser at a peak intensity of {approx}10{sup 18} W/cm{sup 2}. The high-contrast ({approx}10{sup 11}) laser is obtained with a pulse cleaner based on noncollinear optical-parametric amplification and second-harmonic generation processes. The effects of the foil density, foil thickness, as well as the density gradients at the front and back sides of the foil are investigated with two-dimensional particle-in-cell simulations. The beam parameters of maximum energy and divergence strongly depend on the density gradients at the back side of the foil.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of C and N co-doped TiO{sub 2}: A combined hard x-ray photoemission spectroscopy and density functional theory study

We have studied the electronic structure of C and N co-doped TiO{sub 2} using hard x-ray photoelectron spectroscopy and first-principles density functional theory calculations. Our results reveal overlap of the 2p states of O, N, and C in the system which shifts the valence band maximum towards the Fermi level. Combined with optical data we show that co-doping is an effective route for band gap reduction in TiO{sub 2}. Comparison of the measured valence band with theoretical photoemission density of states reveals the possibility of C on Ti and N on O site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of low efficiency droop of semipolar InGaN quantum well light-emitting diodes by modified rate equation with weak phase-space filling effect

We study the low efficiency droop characteristics of semipolar InGaN light-emitting diodes (LEDs) using modified rate equation incoporating the phase-space filling (PSF) effect where the results on c-plane LEDs are also obtained and compared. Internal quantum efficiency (IQE) of LEDs was simulated using a modified ABC model with different PSF filling (n{sub 0}), Shockley-Read-Hall (A), radiative (B), Auger (C) coefficients and different active layer thickness (d), where the PSF effect showed a strong impact on the simulated LED efficiency results. A weaker PSF effect was found for low-droop semipolar LEDs possibly due to small quantum confined Stark effect, short carrier lifetime, and small average carrier density. A very good agreement between experimental data and the theoretical modeling was obtained for low-droop semipolar LEDs with weak PSF effect. These results suggest the low droop performance may be explained by different mechanisms for semipolar LEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum theory of spontaneous and stimulated emission of surface plasmons

We introduce a quantization scheme that can be applied to surface waves propagating along a plane interface. An important result is the derivation of the energy of the surface wave for dispersive nonlossy media without invoking any specific model for the dielectric constant. Working in Coulomb's gauge, we use a modal representation of the fields. Each mode can be associated with a quantum harmonic oscillator. We have applied the formalism to derive quantum mechanically the spontaneous emission rate of surface plasmon by a two-level system. The result is in very good agreement with Green's tensor approach in the nonlossy case. Green's approach allows also to account for losses, so that the limitations of a quantum approach of surface plasmons are clearly defined. Finally, the issue of stimulated versus spontaneous emission has been addressed. Because of the increasing density of states near the asymptote of the dispersion relation, it is quantitatively shown that the stimulated emission probability is too small to obtain gain in this frequency region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗