Pore and grain chemistry during sintering of garnet-type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-state electrolytes
Graphic illustrating the chemical reactions that occur during sintering of LLZTO pellets up to 1100 °C.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Graphic illustrating the chemical reactions that occur during sintering of LLZTO pellets up to 1100 °C.
Using a synchrotron radiation source and a diamond anvil cell, we measured the pressure dependence of the lattice parameters of a polycrystalline Ti{sub 4}AlN{sub 3} sample up to a pressure of 55 GPa. No phase transformations were observed. As observed in Ti{sub 3}SiC{sub 2}, Ti{sub 3}Si{sub 0.5}Ge{sub 0.5}C{sub 2}, and Zr{sub 2}InC, the compressibility of Ti{sub 4}AlN{sub 3} along the c axis was larger than along the a axis which leads to a decrease in the c/a ratio with increasing pressure. The bulk modulus is 216 {+-} 2 GPa, with a pressure derivative of 3.84 {+-} 0.06.
In order to understand the role of Zr addition in Nd{sub 2}Fe{sub 14}B (2-14-1), a systematic study of Zr in Nd{sub 2}Fe{sub 14}B was done on a series of stoichiometric samples (Nd{sub 1-x}Zr{sub x}){sub 2}Fe{sub 14}B with 0 {le} x {le} 0.16. As-cast ingots formed significant amounts of Nd{sub 2}Fe{sub 17} starting at x = 0.06, while in the melt-spun ribbons, no Nd{sub 2}Fe{sub 17} was observed for the range studied. A monotonic decrease in lattice parameters for the 2-14-1 phase indicate Zr solubility in the melt-spun ribbons, but this is not observed in the ingots. Magnetic and thermal measurements on the ribbons showed that the saturated magnetization Ms (around 16 kG), the spin reorientation temperature (125 K), and the Curie temperature (583 K) do not depend on the Zr content, while the anisotropy field Ha slightly decreased as the Zr content increased. The energy product (BHmax) and the coercive force H{sub c} are highly dependent on the solidification and annealing process. Scanning electron microscopy and transmission electron microscopy on the as-melt spun alloys are consistent with x-ray diffraction showing Zr solubility in the 2-14-1 grains. After annealing, Zr diffuses to the grain boundaries to form Zr enriched compounds. Thus, while Zr may exhibit a metastable solubility in Nd{sub 2}Fe{sub 14}B, the enhanced magnetic behaviors observed in melt-spun ribbons are due to the refinement of the microstructure and enhanced grain-boundary pinning.
Molecular dynamics (MD) simulations were performed to examine the temperature-dependent elastic properties and high-temperature deformation behavior of a Cu{sub 64.5}Zr{sub 35.5} amorphous alloy. From the simulations we find that the elastic constants of the amorphous solid and supercooled liquid exhibit an approximately linear temperature dependence. The predicted temperature dependence of the Young's modulus for the amorphous solid obtained from the MD simulations is in good agreement with experimental measurements using dynamic mechanical analysis. Furthermore, the high-temperature plastic deformation behavior determined by MD simulations is qualitatively in good agreement with results from plastic deformation experiments performed on 1 mm diameter Cu{sub 64.5}Zr{sub 35.5} metallic glass rods at 698 K. Notably, the MD simulations reveal that the flow softening regime of the stress-strain curve corresponds to an increase in the free volume in the atomic structure. Moreover, the simulations indicate that the atomic mobility significantly increases within the same regime.
The reaction path for the synthesis of LaFeAsO and LaFeAsO{sub 1-x}F{sub y} by solid state reaction was studied by in situ high temperature x-ray diffraction technique and differential thermal analysis in the temperature interval 100 C - T - 1150 C. Starting with LaAs, Fe{sub 2}O{sub 3}, Fe, and LaF{sub 3} as precursors, the results show that the synthesis is characterized by three temperature intervals: (1) Below 500 C the sequential reduction of Fe{sub 2}O{sub 3} and Fe{sub 3}O{sub 4} takes place through the oxidization of LaAs. Below 400 C, Fe{sub 2}O{sub 3} is reduced to Fe{sub 3}O{sub 4} by LaAs and then at 400 C < T < 500 C Fe{sub 3}O{sub 4} is further reduced to Fe. (2) In the temperature interval 500 C < T < 800 C, multiple intermediate reactions take place resulting in the formation of FeAs and La{sub 2}O{sub 3}. (3) The formation of LaFeAsO based phase could be unambiguously resolved above 800 C. For both LaFeAsO and LaFeAsO{sub 1-x}F{sub y}, FeAs is a primary impurity at high temperatures that melts at {approx} 1040 C. Possible reaction pathways and the difference between F-free and F-doped samples are discussed.
High-pressure transformation and compression behavior of Gd{sub 2}O{sub 3} were investigated using synchrotron radiation x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. The structural transformation from a cubic to a monoclinic phase occurred during the sample precompression process. Phase transitions from both the cubic and the monoclinic polymorphs to a hexagonal structure were observed. The hexagonal phase was stable up to the highest pressure in this study and was not quenchable and transformed to a monoclinic phase after pressure release. The bulk moduli of Gd{sub 2}O{sub 3} for the cubic, monoclinic, and hexagonal phases were obtained by fitting the compression data to the Birch-Murnaghan equation of state. Moreover, an anomaly of the hexagonal type Gd{sub 2}O{sub 3} was observed.
X-ray irradiation was found to convert H{sub 2}O at pressures above 2 GPa into a novel molecular H{sub 2}-O{sub 2} compound. We used optical Raman spectroscopy to explore the behavior of x-ray irradiated H{sub 2}O samples as a function of pressure, time, and composition. The compound was found to be stable over a period of two years, as long as high pressure conditions (>2 GPa) were maintained. The Raman shifts for the H{sub 2} and O{sub 2} vibrons behaved differently from pure H{sub 2} and O{sub 2} as pressure was increased on the compound up to 70 GPa, indicating that it remains a distinct, molecular compound. Based on spectra taken from different locations in a single sample, it appears that multiple forms of the H{sub 2}-O{sub 2} compound exist. The structure and composition of the starting material plays an important role in compound formation, as we found that hydrogen-filled ice clathrate C{sub 2} (H{sub 2})H{sub 2}O did not undergo the same dissociation as observed in ice VII upon x-ray irradiation until pressure was increased to above 10 GPa
The structural stability of cubic Ho{sub 2}O{sub 3} under high pressure has been investigated by angle-dispersive x-ray diffraction (ADXD) in a diamond anvil cell up to 63.0 GPa at room temperature. The diffraction data reveal two structural transformations on compression. The structural transformation from a cubic to a monoclinic structure starts at 8.9 GPa and is complete at 16.3 GPa with an {approx}8.1% volume collapse. A hexagonal phase begins to appear at {approx}14.8 GPa and becomes dominant at 26.4 GPa. This high-pressure hexagonal phase with a small amount of retained monoclinic phase is stable up to the highest pressure of 63.0 GPa in this study. After release of pressure, the hexagonal phase transforms to a monoclinic structure. A third-order Birch-Murnaghan fit yields zero pressure bulk moduli (B{sub 0}) of 206(3), 200(7) and 204(19) GPa and their pressure derivatives (B'{sub 0}) of 4.8(4), 2.1(4), 3.8(5) for the cubic, monoclinic and hexagonal phases, respectively. Comparing with other rare-earth sesquioxides, it is suggested that the transition pressure from cubic to monoclinic phase, as well as the bulk modulus of the cubic phase, increases with the decreasing of the cation radius of rare-earth sesquioxides.
We synthesized a cubic BC{sub 3} (c-BC{sub 3}) phase, by direct transformation from graphitic phases at a pressure of 39 GPa and temperature of 2200 K in a laser-heated diamond anvil cell. A combination of x-ray diffraction, electron diffraction, transmission electron microscopy (TEM) imaging, and electron energy loss spectroscopy (EELS) measurements lead us to conclude that the obtained phase is hetero-nano-diamond, c-BC{sub 3}. High-resolution TEM imaging of the c-BC{sub 3} specimen recovered at ambient conditions demonstrates that the c-BC{sub 3} is a single, uniform, nanocrystalline phase with a grain size of about 3-5 nm. The EELS measurements show that the atoms inside the cubic structure are bonded by sp{sup 3} bonds. The zero-pressure lattice parameter of the c-BC{sub 3} calculated from diffraction peaks was found to be a = 3.589 {+-} 0.007 {angstrom}. The composition of the c-BC{sub 3} is determined from EELS measurements. The ratio of carbon to boron, C/B, is approximately 3 (2.8 {+-} 0.7).
The recently discovered three-dimensional topological insulator Bi{sub 2}Te{sub 3} is studied as function of pressure in terms of crystal structures, resistance, and Hall coefficient. The superconductivity is found in phase I (ambient phase) Bi{sub 2}Te{sub 3} with T{sub c}-3 K, which is related to the topological features. The evolution of crystal structure with pressure is investigated by high pressure synchrotron radiation experiments that reveal structural transitions occurring at about 8 GPa, 13 GPa, and 16 GPa, respectively. Furthermore, the high pressure phases of Bi{sub 2}Te{sub 3} are also superconducting but with much higher T{sub c}-8 K. The superconducting transitions are compared with those for Bi, Te elements. A global phase diagram of Bi{sub 2}Te{sub 3} as function of pressure up to 30 GPa is obtained.
Atomic structures were obtained in equilibrium and supercooled eutectic Zr{sub 75.5}Pd{sub 24.5} liquids by in situ high-energy synchrotron diffraction measurements using the beamline electrostatic levitation (BESL) technique, which provides a high-vacuum, containerless, environment. Reverse Monte Carlo fits to the x-ray static structure factors, constrained using partial pair correlation functions obtained from ab initio molecular dynamics simulations, indicate the presence of medium-range order (MRO) in the form of a strong tendency for Pd-Pd (solute-solute) avoidance. This order persists over the entire temperature range studied, from 170 C above the equilibrium liquidus temperature to 263 C below it. Further, a quantitative analysis of the atomic structures obtained indicates a modest degree of icosahedral-like local order around Pd atoms, with the clusters showing an increased tendency for face-sharing to form more extended structures with decreasing temperature.
Abstract not provided
Abstract not provided
Abstract not provided
Abstract not provided
Abstract not provided
Abstract not provided