SEARCH · Engineering Papers

Results for “stream stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Wind-tunnel investigation at low speeds of a model of the Kestrel (XV-6A) vectored-trust V/STOL airplane

Longitudinal and lateral stability data were obtained with the model out of and in ground effect over a moving ground plane for a range of model angles of attack and sideslip at various thrust coefficients. These data were taken primarily at thrust coefficients which simulate transition speeds on the airplane between hover and 200 knots. Some data, however, represent the effect of thrust deflection at speeds up to 350 knots. Also presented are the effects of control-surface deflections and interference between the jets and free stream.

Margason, R. J.↗

NASA NTRS1974

Investigation of the oxidation behavior of dispersion stabilized alloys when exposed to a dynamic high temperature environment

The oxidation behavior of TD-NiCr and TD-NiCrAlY alloys have been studied at 2000 and 2200 F in static and high speed flowing air environments. The TD-NiCrAlY alloys preoxidized to produce an Al2O3 scale on the surface showed good oxidation resistance in both types of environments. The TD-NiCr alloy which had a Cr2O3 oxide scale after preoxidation was found to oxidize more than an order of magnitude faster under the dynamic test conditions than at comparable static test conditions. Although Cr2O3 normally provides good oxidation protection, it was rapidly lost due to formation of volatile CrO3 when exposed to the high speed air stream. The preferred oxide arrangement for the dynamic test consisted of an external layer of NiO with a porous mushroom type morphology, an intermediate duplex layer of NiO and Cr2O3, and a continuous inner layer of Cr2O3 in contact with the alloy substrate. An oxidation model has been developed to explain the observed microstructure and overall oxidation behavior of all alloys.

Tenney, D. R.↗

NASA NTRS1989

Calculation of the rotor induced download on airfoils

Interactions between the rotors and wing of a rotary wing aircraft in hover have a significant detrimental effect on its payload performance. The reduction of payload results from the wake of lifting rotors impinging on the wing, which is at 90 deg angle of attack in hover. This vertical drag, often referred as download, can be as large as 15 percent of the total rotor thrust in hover. The rotor wake is a three-dimensional, unsteady flow with concentrated tip vortices. With the rotor tip vortices impinging on the upper surface of the wing, the flow over the wing is not only three-dimensional and unsteady, but also separated from the leading and trailing edges. A simplified two-dimensional model was developed to demonstrate the stability of the methodology. The flow model combines a panel method to represent the rotor and the wing, and a vortex method to track the wing wake. A parametric study of the download on a 20 percent thick elliptical airfoil below a rotor disk of uniform inflow was performed. Comparisons with experimental data are made where the data are available. This approach is now being extended to three-dimensional flows. Preliminary results on a wing at 90 deg angle of attack in free stream is presented.

Lee, C. S.↗

DOE OSTI2020

Characterization of flowing liquid films as a regenerating plasma mirror for high repetition-rate laser contrast enhancement

In this paper, we characterize a high repetition-rate regenerating plasma mirror produced by the thin film of liquid formed when two laminar streams collide. The use of a flowing liquid film is inexpensive and the interaction surface refreshes automatically, avoiding buildup of on-target debris. The composition of the liquid material and the relative angle of the film-generating nozzles was optimized for this application. Spectra measured in reflection from a water-based plasma mirror showed a blue shift but an optical reflectivity of up to 30%. The thickness of the film was found to be of the order of 2 μm, and the stability of the reflected spot was ≈1 mrad. The reflected beam profile was highly distorted but stable. Further optimization of the nozzles to affect the fluid flow should enable significant improvements in control of the fluid films and increase in the reflectivity of these mirrors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2002

Ion Storage Tests with the High Performance Antimatter Trap (HiPAT)

The NASA/Marshall Space Flight Centers (NASA/MSFC) Propulsion Research Center (PRC) is evaluating an antiproton storage system, referred to as the High Performance Antiproton Trap (HiPAT). This interest stems from the sheer energy represented by matter/antimatter annihilation process with has an energy density approximately 10 order of magnitude above that of chemical propellants. In other terms, one gram of antiprotons contains the equivalent energy of approximately 23 space shuttle external tanks or ET's (each ET contains roughly 740,000 kgs of fuel and oxidizer). This incredible source of stored energy, if harnessed, would be an enabling technology for deep space mission where both spacecraft weight and propulsion performance are key to satisfying aggressive mission requirements. The HiPAT hardware consists of a 4 Tesla superconductor system, an ultra high vacuum test section (vacuum approaching 10(exp -12) torr), and a high voltage confinement electrode system (up to 20 kvolts operation). The current laboratory layout is illustrated. The HiPAT designed objectives included storage of up to 1 trillion antiprotons with corresponding lifetimes approaching 18 days. To date, testing has centered on the storage of positive hydrogen ions produced in situ by a stream of high-energy electrons that passes through the trapping region. However, due to space charge issues and electron beam compression as it passes through the HiPAT central field, current ion production is limited to less then 50,000 ions. Ion lifetime was determined by counting particle populations at the end of various storage time intervals. Particle detection was accomplished by destructively expelling the ions against a micro-channel plate located just outside the traps magnetic field. The effect of radio frequency (RF) stabilization on the lifetime of trapped particles was also examined. This technique, referred to as a rotating wall, made use of a segmented electrode located near the center of the trap on which various phases of a particular frequency were applied. Various experiments were performed illustrating the ability of an RF drive to both prolong and reduced the lifetimes of various ion species depending on the selected frequency. HiPAT is now being reconfigured for testing with an ion source that will provide both positive and negative hydrogen ions from an external source. This ion system shall provide higher fill capacity (order of million of ions per shot), stacking of multiple shots, and injection schemes typical of a realistic antiproton delivery system.

Martin, James J.↗

DOE OSTI2025

Cleavage of C-O and C-C Bonds in Lignin-Derived Compounds to Produce Aromatics Using Molybdenum-Containing MFI Zeolites

Lignin, the most abundant source of renewable arenes, is a viable feedstock for the production of aromatic compounds. However, the prevalence of resilient C-C bonded oligomeric fragments in lignin-derived streams can compromise monomer yields during reductive catalytic fractionation (RCF). To address this issue, we developed a bifunctional molybdenum-containing MFI (Mo/H-MFI) zeolite catalyst capable of cleaving both C-O and C-C bonds in lignin-derived molecules to produce aromatic monomers. Using propylguaiacol as a model compound, we demonstrated the importance of proximity between metallic molybdenum carbide sites and the Bronsted acid sites in the zeolite in achieving high carbon yields (~80%) of benzene, toluene, propylbenzene, and phenol while maintaining catalyst stability (>98% stable conversion for 20 h). A reaction network involving both C-O and C-C bond cleavage pathways was proposed based on kinetic studies using key intermediates as feeds. Finally, we successfully depolymerized partially deoxygenated lignin oil obtained from the RCF of poplar using a continuous, two-pass catalytic process. This work highlights the potential of the bifunctional Mo/H-MFI catalyst in upgrading complex lignin feedstocks and provides a methodological approach for converting lignin-derived compounds into platform aromatic chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Stabilization of furanics to cyclic ketone building blocks in the vapor phase

Furanics are produced in high abundance from the decomposition of biomass. The thermal and chemical instability of these species leads to the formation of humins upon condensation. The ring rearrangement of furfural to form 2-cyclopentenone and cyclopentanone is known to occur in the condensed aqueous phase, but this requires operation in condensed acidic media where humin formation readily occurs. High hydrogen pressures are typically used to offset rapid polymerization reactions, limiting the yields of stable unsaturated products that result. We report that furfural can be selectively converted to 2-cyclopentenone and cyclopentanone in a single step over supported TiO 2 catalysts with both model compounds and real biomass-derived streams in the vapor phase. Selectivity for ring rearrangement vs. C—O cleavage over TiO 2 supported Ru and Pd catalysts can be tuned by manipulating the water partial pressure. The formation of these products in the absence of a condensed acidic stream also enables the tuning of reaction environments to favor the selective formation of unsaturated ketones, which could be valuable diolefin precursors. The incorporation of a TiO 2 support in the catalysts tested leads to the suppression of C—C hydrogenolysis/decarbonylation and enhancement of ring rearrangement reactions. The nature of the active sites for selective Csingle bondO cleavage as well as vapor phase ring rearrangement are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Complexation of High-Valency Mid-Actinides by a Lipophilic Schiff Base Ligand: Synthesis, Structural Characterization, and Progress toward Selective Extraction

We report that separation of U, Np, and Pu from used nuclear fuel (UNF) would result in lower long-term radiotoxicity, alleviating constraints on the storage and handling of the material. The complexity of UNF requires several industrial-scale processes with multiple waste streams. A one-step solution to the group removal of the elements, U–Pu, is desirable. Here we present a possible solution to group actinide separation utilizing the unique dioxy conformation of An(V/VI) cations and demonstrate the ability of a tetradentate lipophilic Schiff base ligand (L) to yield isostructural complexes of the general formula [(An VI O 2 )(L)(CH 3 CN)] (where An = U, Np, or Pu). Extraction of An(VI) with the ligand follows the order U > Pu > Np, likely reflecting the decreased stability of the hexavalent actinide across the series. Lastly, while the results indicate a promising path toward a one-step process, further improvement in the ligand stability and control of the redox chemistry is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Physical Mechanism of the Transverse Instability in Radiation Pressure Ion Acceleration

The transverse stability of the target is crucial for obtaining high quality ion beams using the laser radiation pressure acceleration (RPA) mechanism. In this Letter, a theoretical model and supporting two-dimensional (2D) particle-in-cell (PIC) simulations are presented to clarify the physical mechanism of the transverse instability observed in the RPA process. It is shown that the density ripples of the target foil are mainly induced by the coupling between the transverse oscillating electrons and the quasistatic ions, a mechanism similar to the oscillating two stream instability in the inertial confinement fusion research. The predictions of the mode structure and the growth rates from the theory agree well with the results obtained from the PIC simulations in various regimes, indicating the model contains the essence of the underlying physics of the transverse breakup of the target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Coal-fueled Pressurized Chemical Looping Combustion with a Spouting Fluidized Bed

The goal of this final project report is to comprehensively summarize the work conducted on project DE-FE0025098. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UKy-CAER) (Recipient) has developed a coal-based combined cycle integrated with a pressurized chemical looping combustion (PCLC) technology to achieve high plant efficiency while capturing CO 2 at low cost. The project involved the design, fabrication, commissioning, parametric testing, and performance validation of the spouted bed approach as coal feeding to narrow the major near-term technical gaps that impede the application of PCLC into solid fuel and scale-up. Specifically, UKy-CAER provided detailed front-end design of a 50 kWth PCLC facility, produced approximately 500 lbs of oxygen carrier (OC) from industrial by-product, Red Mud in addition to commercially available ilmenite, and completed a 70+ hour-long experimental campaign to evaluate the coal feed system and performance and flexibility of the 50 kWth facility with various coal, operating pressures, fluidization agent, and OCs. Project results verified UKy-CAER’s proposed approach to address the major technical gaps of solid-fueled PCLC technology which includes: (1) cost-effective materials for OCs with high reactivity, cyclic capacity, chemical stability, and high resistance to agglomeration with coal ash; (2) fast reaction rates during solid-solid chemical looping combustion (CLC) for reduction of the OC inventory and reactor size; (3) simple and effective ash separation from binary mixtures of the OCs and solid fuel ash; (4) spouting bed coal feeding to suppress OC agglomeration in the reducer resulting from the initial coal devolatilization step, coal tar formation; and (5) pollutant removal to avoid sulfur accumulation in the system or their emission into the hot spent air stream which could result in a second train for SOx removal and potentially cause failure of the flue gas turbine blade. UKy-CAER’s economical cycling material and novel spouted bed reducer configuration shows promise, as summarized in this report, as an effective means for improved plant efficiency with reduced process complexity.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Towards stabilization of pressurized oxy-coal diffusion flames

Designing an effective burner is vital for the development of pressurized oxy-fuel combustion technologies. Turbulent jet diffusion burners are adopted for the pressurized oxy-combustor in this research and a bluff-body is employed to create a recirculation zone to stabilize the flame in pressurized oxy-combustor. The objective of this numerical work is to perform a systematic analysis of the characteristics of this pressurized non-premixed flame. Specifically, a 15-bar POFC combustor of power 100 kWth is modeled employing the Ansys FLUENT commercial platform, using Reynolds-averaged Navier-Stokes (RANS) modeling. The present computational work focuses on identifying the aerothermodynamic features of the isothermal and reacting flow with a disk-shape bluff-body. Results show that fuel-oxidizer stream momentum ratio has great impacts on the temperature profile of the down-fired, co-axial, pressurized oxy-coal, diffusion flame. Parametric study of the width of the burner tip identifies an optimal range for this pressurized burner.

Li, Lei↗

DOE OSTI2022

Preparation and characterization of aminated co-solvent enhanced lignocellulosic fractionation lignin as a renewable building block for the synthesis of non-isocyanate polyurethanes

Lignin is a major bioresource from 2nd generation biorefinery process streams and from pulp and paper production that is still severely underutilized nowadays. Its natural polymeric and aromatic structures make it suitable as a potential building block for biopolymer production. Due to the growing environmental and health concerns over conventional polyurethane (PU) manufacturing processes that utilize toxic isocyanates, there is a great interest to develop a non-isocyanate PU (NIPU) route. Herein, we demonstrate a novel strategy that uses highly pure lignin isolated from co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment of poplar wood to produce biobased NIPUs. In this strategy, hardwood poplar is firstly fractionated via a CELF pretreatment to produce a clean lignin stream that is rich in phenolics. The CELF lignin was then aminated by a Mannich reaction, and the aminated CELF lignin was finally reacted with bicyclic carbonates to yield an advanced NIPU. In this work, the structure, mechanical, and thermal properties of these novel NIPUs were elucidated by FTIR, NMR, tensile test, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). The mechanical properties of these lignin based NIPUs could be tuned from highly rigid to elastic polymers by simply modifying the lignin constituents of the polymer. The thermal stabilities of NIPUs were improved because of the addition of aminated lignin, and NIPU containing 55 and 23 wt% lignin showed the highest tensile strength (~1.2 MPa) and elongation at break (~140%), respectively. The results obtained in this study demonstrate that the reaction of cyclic carbonate with aminated lignin represents an interesting pathway for the synthesizing of lignin based NIPU with a relative high lignin content.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Upcycling Linear Low-Density Polyethylene Waste into Graphene for High Mass Loading Supercapacitors

Upcycling plastic into advanced carbons, such as graphene and porous carbon, offers attractive options to manage waste streams by converting the plastic into carbon electrode materials for energy storage devices. Linear low density polyethylene (LLDPE) is firstly bulk-oxidized with a facile and scalable method and then carbonized and catalyticlly graphenized into porous graphene materials. The LLDPE derived graphene (LLDPE-G) has a BET specific surface area up to 1800 m2/g and Raman ID/IG ratio of 0.85. When used as electrode material for symmetric supercapacitor, LLDPE-G possesses outstanding specific capacitance and excellent areal capacitance. Moreover, LLDPE-G exhibits exceptional cycling stability with capacitance retention of 95.8% after 100,000 cycles. Last but not least, KCl is recycled and reused over 3 cycles with material quality and electrocapacitive performance of LLDPE-G retained and verified after each cycle.

Gao, Yuan↗

NASA NTRS2012

Towards Reliable Evaluation of Anomaly-Based Intrusion Detection Performance

This report describes the results of research into the effects of environment-induced noise on the evaluation process for anomaly detectors in the cyber security domain. This research was conducted during a 10-week summer internship program from the 19th of August, 2012 to the 23rd of August, 2012 at the Jet Propulsion Laboratory in Pasadena, California. The research performed lies within the larger context of the Los Angeles Department of Water and Power (LADWP) Smart Grid cyber security project, a Department of Energy (DoE) funded effort involving the Jet Propulsion Laboratory, California Institute of Technology and the University of Southern California/ Information Sciences Institute. The results of the present effort constitute an important contribution towards building more rigorous evaluation paradigms for anomaly-based intrusion detectors in complex cyber physical systems such as the Smart Grid. Anomaly detection is a key strategy for cyber intrusion detection and operates by identifying deviations from profiles of nominal behavior and are thus conceptually appealing for detecting "novel" attacks. Evaluating the performance of such a detector requires assessing: (a) how well it captures the model of nominal behavior, and (b) how well it detects attacks (deviations from normality). Current evaluation methods produce results that give insufficient insight into the operation of a detector, inevitably resulting in a significantly poor characterization of a detectors performance. In this work, we first describe a preliminary taxonomy of key evaluation constructs that are necessary for establishing rigor in the evaluation regime of an anomaly detector. We then focus on clarifying the impact of the operational environment on the manifestation of attacks in monitored data. We show how dynamic and evolving environments can introduce high variability into the data stream perturbing detector performance. Prior research has focused on understanding the impact of this variability in training data for anomaly detectors, but has ignored variability in the attack signal that will necessarily affect the evaluation results for such detectors. We posit that current evaluation strategies implicitly assume that attacks always manifest in a stable manner; we show that this assumption is wrong. We describe a simple experiment to demonstrate the effects of environmental noise on the manifestation of attacks in data and introduce the notion of attack manifestation stability. Finally, we argue that conclusions about detector performance will be unreliable and incomplete if the stability of attack manifestation is not accounted for in the evaluation strategy.

cyber defense↗

NASA NTRS1977

Non-symmetric two-stream instability

A theoretical investigation is performed concerning the instability spectrum of quasi-electrostatic waves at shifted half-odd-integer values of the cyclotron frequency due to nonsymmetric counterstreaming electron beams. The beam velocities parallel and perpendicular to the static magnetic field are represented by double Dirac delta functions with no imposition of parameter limitations. Systematic consideration is given to the coupling between plasma modes and cyclotron modes as well as the coupling between cyclotron modes of the two beams that result in shifted half-odd-integer multiples of the cyclotron frequency. The general dispersion equation for quasi-electrostatic waves is analyzed, and plasma-cyclotron coupling in the nonsymmetric case is treated by deriving approximate analytical expressions for maximum growth rates and marginal stability. Exact numerical solutions in both frequency and wavenumber space are obtained and compared with the analytical expressions. Cyclotron-cyclotron coupling modes are treated in the same way, and the results for both types of coupling are compared. It is found that certain modes may be weakened or completely suppressed when the Bessel functions for specific plasma parameters vanish.

Cuperman, S.↗

DOE OSTI2021

Pilot-scale hydrotreating of catalytic fast pyrolysis biocrudes: process performance and product analysis

Catalytic fast pyrolysis (CFP) is a technology option for producing advanced biofuels from hydrocarbon-rich biocrude intermediates. The relatively high oxygen content of biocrudes compared to petroleum intermediates increases hydrogen consumption and the lower thermal stability accelerates catalyst deactivation and reactor fouling hindering the adaptation of hydrotreating technology for biocrude upgrading into biofuels. In this study, four chemically different biocrude feeds were upgraded in a pilot scale hydroprocessing unit at similar process conditions using a commercial hydrodeoxygenation (HDO) catalyst. The biocrude feeds and hydrotreated products were characterized using standard ASTM procedures and advanced analytical techniques (GCxGC-FID and GCxGC-MS). HDO catalyst activity was monitored by changes in physical properties and chemical composition of the upgraded products as a function of time on stream. Aliphatic acids, ketones, aldehydes, and furan derivatives were completely converted during the hydrotreating tests while the concentration of aromatics, aliphatic hydrocarbons and phenolics increased during the hydrotreating tests. The oxygen content, nitrogen content, specific gravity, viscosity and the heavy end of the boiling point range (determined by simulated distillation) of the upgraded products increased with increasing time on stream during hydrotreating. The deactivation rate was the lowest for the biocrude feed that contained the most aliphatic and aromatic hydrocarbons and was the highest for the biocrude feed that had the most anhydrosugars. Overall, the HDO deactivation rate correlates with the total amount of oxygen in the feed (17 wt% to 29 wt%, on a wet basis).

09 BIOMASS FUELS↗

NASA NTRS2010

The Wettzell System Monitoring Concept and First Realizations

Automated monitoring of operational system parameters for the geodetic space techniques is becoming more important in order to improve the geodetic data and to ensure the safety and stability of automatic and remote-controlled observations. Therefore, the Wettzell group has developed the system monitoring software, SysMon, which is based on a reliable, remotely-controllable hardware/software realization. A multi-layered data logging system based on a fanless, robust industrial PC with an internal database system is used to collect data from several external, serial, bus, or PCI-based sensors. The internal communication is realized with Remote Procedure Calls (RPC) and uses generative programming with the interface software generator idl2rpc.pl developed at Wettzell. Each data monitoring stream can be configured individually via configuration files to define the logging rates or analog-digital-conversion parameters. First realizations are currently installed at the new laser ranging system at Wettzell to address safety issues and at the VLBI station O Higgins as a meteorological data logger. The system monitoring concept should be realized for the Wettzell radio telescope in the near future.

Ettl, Martin↗

DOE OSTI2020

Application of a Heat Integrated Post-combustion CO 2 Capture System with Hitachi Advanced Solvent into Existing Coal-Fired Power Plant (Final Technical Report)

The goal of this final project report is to comprehensively summarize the work conducted on project DE-FE0007395. In accordance with the Project Management Plan (PMP), Revision F dated 5/10/2019, and Statement of Project Objectives (SOPO) within, the University of Kentucky (UK) Center for Applied Energy Research (CAER) (Recipient) has successfully demonstrated a unique, versatile CO 2 capture system (CCS) using a heat integrated process combined with two-stage stripping for process intensification, heat recovery and demineralized (DM) water generation. This project involved the design, fabrication, installation, testing of and data analysis from the UK CAER 0.7 MWe small pilot scale CO2 capture process installed at Kentucky Utilities (KU) E.W. Brown Generating Station in Harrodsburg, KY. During each of the four project Budget Periods (BPs), UK CAER met all project deliverables, all project milestones, with National Energy Technology Laboratory (NETL) approved adjustments made to the campaign long-term hours during BP4. The CCS was constructed in modular skids. Two solvent campaigns were initially conducted; the first with a 30 wt% monoethanolamine (MEA) as a baseline, and the second with the Hitachi H3-1 advanced solvent. Additional tests were performed with two advanced solvents including CAER and Proprietary Solvent C. Short-period testing with a higher concentration of 40 wt% MEA was conducted to evaluate the potential saving with high alkalinity. From the various solvent campaigns, unique aspects of the UK CAER CCS technology, as well as its flexibility and versatility were experimentally validated and demonstrated. With respect to solvent evaluation efforts in identifying candidates with significant operational and capital cost savings potential, performance of solvents were evaluated to determine the energy requirements for regeneration; environmental impacts from secondary emissions and degradation products; degradation rates, solvent make-up rates and stability. The assessments were done from parametric tests that determined optimum operating conditions for the individual solvents to maximize process efficiency and minimize the parasitic load of the power plant, and from long term campaigns (1000 hours for 30 wt% MEA and 1000 hours for H3-1) which collectively informed the techno-economic analyses (TEA) of the process. The long term campaigns included corrosion studies which used three types of metal coupons in different sections of the process: (absorber, primary stripper, lean carbon-loaded and rich carbon loaded flow streams in process) to mimic heat and flow dynamics process equipment were exposed to. The estimated corrosion rates were used to elucidate corrosion mechanisms and to further guide process material selection for potential capital cost savings.

gas separation↗