Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stacking engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Quantum anomalous Hall effect in two-dimensional magnetic insulator heterojunctions

Abstract Recent years have witnessed tremendous success in the discovery of topological states of matter. Particularly, sophisticated theoretical methods in time-reversal-invariant topological phases have been developed, leading to the comprehensive search of crystal database and the prediction of thousands of topological materials. In contrast, the discovery of magnetic topological phases that break time reversal is still limited to several exemplary materials because the coexistence of magnetism and topological electronic band structure is rare in a single compound. To overcome this challenge, we propose an alternative approach to realize the quantum anomalous Hall (QAH) effect, a typical example of magnetic topological phase, via engineering two-dimensional (2D) magnetic van der Waals heterojunctions. Instead of a single magnetic topological material, we search for the combinations of two 2D (typically trivial) magnetic insulator compounds with specific band alignment so that they can together form a type-III broken-gap heterojunction with topologically non-trivial band structure. By combining the data-driven materials search, first-principles calculations, and the symmetry-based analytical models, we identify eight type-III broken-gap heterojunctions consisting of 2D ferromagnetic insulators in the MXY compound family as a set of candidates for the QAH effect. In particular, we directly calculate the topological invariant (Chern number) and chiral edge states in the MnNF/MnNCl heterojunction with ferromagnetic stacking. This work illustrates how data-driven material science can be combined with symmetry-based physical principles to guide the search for heterojunction-based quantum materials hosting the QAH effect and other exotic quantum states in general.

36 MATERIALS SCIENCE↗

Phase Picking Beyond Local Distances: Where Waveform Filtering Still Matters for Deep Learning Models

Waveform filtering is a standard step in traditional seismic phase picking but often receives little attention in deep learning workflows, where models are typically trained on raw or minimally processed waveforms. Although this strategy performs well for local events, we show that performance can degrade substantially at regional distances. To address this limitation, we introduce two ways to incorporate multiband-filtered waveforms into deep learning phase pickers. The stacking approach concatenates filtered inputs along the channel dimension, while the branching approach processes each frequency band through a dedicated network branch before feature fusion. Both approaches can substantially improve performance across epicentral distances of 0° to 20°, but their effectiveness depends strongly on the selected frequency bands. Tests with multiple filter banks show that filter-bank design should be treated as part of model optimization rather than as a fixed preprocessing choice. Grad-CAM analysis of the branching model indicates that band importance varies among waveform samples and across training realizations, with only a weak overall preference for the 0.25 to 0.5 Hz band. These results show that no single filter band is consistently optimal and demonstrate that explicit feature engineering remains valuable for robust deep learning-based seismic phase picking.

58 GEOSCIENCES↗

Influence of Calcite on Uranium(VI) Sorption onto Montmorillonite Clay

Currently, most proposed methods for the long-term storage of nuclear waste include engineered buffer systems (EBS) in underground geologic repositories. The design of EBS typically involves a layer of geological buffer material such as bentonite. Bentonite is an ideal material for these systems, since it largely consists of the swelling smectite clay montmorillonite, which provides two types of surface sites available for the sorption of radionuclides, such as uranium(VI) (U(VI)). However, the presence of calcite, a common accessory mineral in bentonite, may potentially alter the sorption of U(VI) onto montmorillonite in multiple ways. First, calcite provides an additional surface for U(VI) sorption reactions. In addition, calcite dissolution will lead to dissolved calcium in porewater solutions, which may in turn affect U(VI) solution speciation, U(VI) ion exchange reactions, and the stacking and interlayer spacing of smectite layers. Last, a potential formation of U(VI)-Ca-carbonate co-precipitates may remove U(VI) from solution. As a first step, we characterized the sorption of U(VI) onto montmorillonite in the presence and absence of dissolved calcium at various ionic strength conditions in batch sorption envelope experiments. The presence of dissolved calcium resulted in decreased U(VI) sorption onto montmorillonite in acidic environments, but in no apparent changes in U(VI) sorption in near-neutral pH ranges. At higher pH values, there may be a possible decrease in U(VI) sorption, which needs to be further investigated. The observed trends at low pH can be explained by the preferential binding of Ca 2+ cations relative to UO 2 2+ , which resulted in a competition between the two cations for clay surface sites. This hypothesis is further supported by the results of additional sorption experiments, which were performed at various ionic strengths, but in the absence of calcium. In a next step, we will expand our experiments to include mixtures of calcite and montmorillonite as solids.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anode gas stack start-up heater and purge gas generator

In one embodiment the present invention provides for an anode side gas flow heater for a fuel cell generator that comprises a recirculating anode gas flow 28, at least one burner 24, and an energy source 22. The energy source heats the burner, the anode gas flow passes over the at least one burner and is heated, and the heated anode gas flow is then passed through the anode side of the fuel cell generator 4, where the fuel cell generator is heated.

30 DIRECT ENERGY CONVERSION↗

Highly reliable stacked white organic light emitting device

An organic light emitting device (OLED) is provided that includes a cathode and an anode; a blue emitting layer; and at least two hybrid red/green emitting layers. One of the at least two hybrid red/green emitting layers is a cathode side, red/green emitting layer that is disposed between the cathode and the blue emitting layer. The second of the at least two hybrid red/green emitting layers is an anode side, red/green emitting layer that is disposed between the blue emitting layer and the anode. The OLED emits white light.

42 ENGINEERING↗

Engineering 3D Floquet Codes by Rewinding

Floquet codes are a novel class of quantum error-correcting codes with dynamically generated logical qubits arising from a periodic schedule of noncommuting measurements. We utilize the interpretation of measurements in terms of condensation of topological excitations and the rewinding of measurement sequences to engineer new examples of Floquet codes. In particular, rewinding is advantageous for obtaining a desired set of instantaneous stabilizer groups on both toric and planar layouts. Our first example is a Floquet code with instantaneous stabilizer codes that have the same topological order as the three-dimensional (3D) toric code(s). This Floquet code also exhibits a splitting of the topological order of the 3D toric code under the associated sequence of measurements, i.e., an instantaneous stabilizer group of a single copy of the 3D toric code in one round transforms into an instantaneous stabilizer group of two copies of the 3D toric code up to nonlocal stabilizers in the following round. We further construct boundaries for this 3D code and argue that stacking it with two copies of the 3D subsystem toric code allows for a transversal implementation of the logical non-Clifford controlled-controlled- Z gate. We also show that the coupled-layer construction of the X-cube Floquet code can be modified by a rewinding schedule such that each of the instantaneous stabilizer codes is finite depth equivalent to the X-cube model up to toric codes; the X-cube Floquet code exhibits a splitting of the X-cube model into a copy of the X-cube model and toric codes under the measurement sequence. Our final 3D example is a generalization of the 2D Floquet toric code on the honeycomb lattice to three dimensions, which has instantaneous stabilizer codes with the same topological order as the 3D fermionic toric code. Published by the American Physical Society2024

Physics↗

Light Duty Fuel Cell Electric Vehicle Validation Data (Final Technical Report)

Electricore, along with partners from Quong & Associates, Inc., Honda R&D Americas (Honda), Nissan Technical Center North America (Nissan), and Toyota Motor Engineering & Manufacturing North America, Inc. (Toyota), participated in the Light Duty Fuel Cell Electric Vehicle (FCEV) Validation Data program sponsored by the Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) (Cooperative Agreement No. DE-EE0005968). The goal of this program was to provide real world data from the operation of past and current FCEVs, in order to measure their performance and improvements over time. The program was successful; 85% of the data fields requested were provided and not restricted due to proprietary reasons. Overall, the team from Electricore provided at least 4.8 GB of data to DOE, which was combined with data from other participants to produce over 33 key data products. These products included vehicle performance and fuel cell stack performance/durability. The data were submitted to the National Renewable Energy Laboratory’s National Fuel Cell Technology Evaluation Center (NREL NFCTEC) and combined with input from other participants. NREL then produced composite data products (CDP) which anonymized the data in order to maintain confidentiality. The results were compared with past data, which showed a measurable improvement in FCEVs over the past several years. The results were presented by NREL at the 2014 Fuel Cell Seminar, and 2014 and 2015 (planned) DOE Annual Merit Review. The project was successful. The team provided all of the data agreed upon and met all of its goals. The project finished on time and within budget. In addition, an extra $62,911 of cost sharing was provided by the Electricore team. All participants believed that the method used to collect, combine, anonymize, and present the data was technically and economically effective. This project helped EERE meet its mission of ensuring America’s security and prosperity by documenting progress in addressing energy and environmental challenges. Information from this project will be used by the hydrogen and vehicle industries to help advance the introduction of FCEVs and associated hydrogen infrastructure.

30 DIRECT ENERGY CONVERSION↗

Sensitivity analysis of a layered piezoelectric system using ZFEM

The complex variable finite element method (ZFEM) is a numerical technique which aims to find the partial derivatives of the independent variables with respect to variation in dependent parameters declared in the physics. This is done by combining the complex Taylor series expansion within the weak formulation of the governing equation in a coupled system of linear equations forming a complex valued block matrix given by the Cauchy–Riemann matrix representation. In this work, two-dimensional linear first-order elements have been implemented in ZFEM to predict the design derivatives of the mechanical displacement field and the voltage potential field for a layered piezoelectric system in a steady-state study with Dirichlet boundary condition applied at the top and bottom edges of the geometry. This approach allows the standard FEM solution to quantify the sensitivity of the mechanical displacement and voltage potential fields with respect to small variations in the material properties through the information obtained from the computation of the derivatives. The domain is formed by a layered body with PZT-4 and PZT-5 stacked together. For result verification, the numerical solution obtained with ZFEM was compared to results from a commercial FEM package and the solution from the imaginary part was compared to the exact solution of a well-known benchmark problem. In conclusion, comparison of the results showed good agreement for both the real and imaginary parts of the solution and the largest sensitivities were found in PZT-5 specifically in C 13 , C 33 , and ε 33 .

42 ENGINEERING↗

Dose dependence of helium bubble formation in nano-engineered SiC at 700 °C

Knowledge of radiation-induced helium bubble nucleation and growth in SiC is essential for applications in fusion and fission environments. Here we report the evolution of microstructure in nano-engineered (NE) 3C SiC, pre-implanted with helium, under heavy ion irradiation at 700 °C up to doses of 30 displacements per atom (dpa). Elastic recoil detection analysis confirms that the as-implanted helium depth profile does not change under irradiation to 30 dpa at 700 °C. While the helium bubble size distribution becomes narrower with increasing dose, the average size of bubbles remains unchanged and the density of bubbles increases somewhat with dose. These results are consistent with a long helium bubble incubation process under continued irradiation at 700 °C up to 30 dpa, similar to that reported under dual and triple beam irradiation at much higher temperatures. The formation of bubbles at this low temperature is enhanced by the nano-layered stacking fault structure in the NE SiC, which enhances point defect mobility parallel to the stacking faults. Here, this stacking fault structure is stable at 700 °C up to 30 dpa and suppresses the formation of dislocation loops normally observed under these irradiation conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reversible Physical Gelation of Thermotropic Liquid Crystals Driven by Nanoplate Self-Assembly

Physically gelled soft materials, driven by the self-assembly of low-molecular-mass gelators (LMGs), have emerged as a platform for designing advanced gels that exhibit reversible gelation and property tunability. Liquid crystal (LC) gels are of great interest due to their supramolecular orderings as gel hosts and their enhanced electro-optical properties. In this study, we demonstrate the physical gelation of a nematic LC driven by nanoplate self-assembly, expanding the concept of gelators from small molecules to nanoparticles. These nanoplates are functionalized with promesogenic ligands and form a fibrillar network in LCs with face-to-face interplate stacking, resembling LMGs. The critical gelation volume fraction in the tilt test is only 0.14 v %, comparable to values reported for LMGs. Rheological analyses confirm viscoelastic properties characteristic of gelation. In situ small-angle X-ray scattering (SAXS) characterizes the formation of nanoplate networks in the LC with decreasing temperature, wherein LC mesogens become trapped in pores. Molecular dynamics (MD) simulations reveal that the interaction between ligand-coated nanoplates and LC-forming mesogens induces a multidomain LC structure, increasing friction between LC domains and stabilizing the gel. This study establishes direct relationships among molecular interactions, nanostructures, and mechanical properties in physically gelled LCs. In conclusion, the findings inspire the future gelator design of both LMGs and nanoplates, with potential applicability in bioscaffold engineering and liquid crystalline nanocomposites.

36 MATERIALS SCIENCE↗

A Transformational Natural Gas Fueled Dynamic SOFC for Data Center in-Rack Power (Final Technical Report)

Data centers consume 250TWh or 1% of global electricity use in 2019. This electricity demand is expected to grow exponentially in the future. The current data center power supply relies on electric grids with diesel engines and batteries as backup; the latter is critically important because a sudden loss of power could erase crucial data, causing catastrophic economic loss. However, such a double protection architecture is costly, inefficient and polluting. In search for better in-rack power system, fuel-cell based generators have recently emerged as a promising alternative to diesel engines and batteries because of its potential to be more cost-effective, more efficient and less polluting. Among many types of fuel cells, solid oxide fuel cells stand out to be a front runner because of their ability to directly operate on natural gas that has an existing infrastructure. However, there are several critical challenges facing SOFC generators to meet the rigorous power requirements of data centers: high cost, poor reliability and more importantly, slow response to the datacenters’ dynamic load change. The unexpected overload conditions in data centers can cause fuel starvation; the latter can initiate microcracks in the anode structure, thus jeopardizing the lifetime of the SOFC generator. The current efforts to increase transient power capabilities of traditional SOFCs and therefore protect SOFC stacks from internal damage during transient loading, rely primarily upon mathematical algorithms. One of the challenges to these control methodologies is the physical limitations of the fuel delivery system such as slow response of mass flow controllers to fast power demand.

30 DIRECT ENERGY CONVERSION↗

Systems and synthetic biology approaches to alter plant cell walls and reduce biomass recalcitrance

Summary Fine‐tuning plant cell wall properties to render plant biomass more amenable to biofuel conversion is a colossal challenge. A deep knowledge of the biosynthesis and regulation of plant cell wall and a high‐precision genome engineering toolset are the two essential pillars of efforts to alter plant cell walls and reduce biomass recalcitrance. The past decade has seen a meteoric rise in use of transcriptomics and high‐resolution imaging methods resulting in fresh insights into composition, structure, formation and deconstruction of plant cell walls. Subsequent gene manipulation approaches, however, commonly include ubiquitous mis‐expression of a single candidate gene in a host that carries an intact copy of the native gene. The challenges posed by pleiotropic and unintended changes resulting from such an approach are moving the field towards synthetic biology approaches. Synthetic biology builds on a systems biology knowledge base and leverages high‐precision tools for high‐throughput assembly of multigene constructs and pathways, precision genome editing and site‐specific gene stacking, silencing and/or removal. Here, we summarize the recent breakthroughs in biosynthesis and remodelling of major secondary cell wall components, assess the impediments in obtaining a systems‐level understanding and explore the potential opportunities in leveraging synthetic biology approaches to reduce biomass recalcitrance.

09 BIOMASS FUELS↗

Role-Based Access Control for Distributed Energy Resources v.1.0

The Role-Based Access Control (RBAC) for Distributed Energy Resources (DER) software is an automated and transparent stack for RBAC administrators to interact with RBAC policy. The package includes demonstrations of centralized and decentralized RBAC implementation. Both include simulated DER entities that are stored automatically in a centralized Lightweight Directory Access Protocol (LDAP) server. It also includes a REST-API to serve the HTTP requests of the RBAC administrators. A complete front-end is included to serve the users' needs. This software may be used by industry (DER vendors/utilities) as well as the research community to determine if a centralized or decentralized solution fits better the needs of an RBAC model in a DER environment. Additionally, parts of this software may be useful for developing implementations for specific needs. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2021-8292 O

Johnson, Jay↗

Lateral Confinement in 2D Nanoplatelets: A Strategy to Expand the Colloidal Quantum Engineering Toolbox

Among colloidal nanocrystals, 2D nanoplatelets offer a unique set of properties with exceptionally narrow luminescence and low lasing thresholds. Furthermore, their anisotropic shape expands the playground for the complex design of heterostructures where spectra but also scattering rates can be engineered. A challenge that still remains is to combine shell growth which makes NPLs stable, with spectral tunability. Indeed, most reported shelled nanoplatelets end up being red emitters due to a loss of quantum confinement. Here, the combination of both lateral and in-plane confinements within a single heterostructure is explored. A CdS/CdSe/CdS/CdZnS core–crown–crown shell structure that enables yellow emission is grown and that is responsive to a large range of excitation including visible photons, X-ray photons, electron beams, and electrical excitations. k.p simulations predict that emission tunability of up to several 100 s of meV can be obtained in ideal structures. This material also displays stimulated emission resulting from bi-exciton emission with a low threshold. Once integrated into an LED stack, this material is compatible with sub-bandgap excitation and exhibits high luminance. Scaling of the electroluminescence properties by downsizing the pixel size is also investigated.

2D materials↗

Field Laboratory for Emerging Stacked Unconventional Plays in Central Appalachia

The goal of the Field Laboratory for Emerging Stacked Unconventional Plays (ESUP) in Central Appalachia project was to investigate and characterize the resource potential for multi-play production of emerging unconventional reservoirs in Central Appalachia. Project activities included drilling, logging and coring of a vertical characterization well drilled to basement to approximately 15,000 feet in depth. The data from drilling and well logs as well recovered core samples were used by the research team to support characterization of the geology and potential pay zones within the Nora Gas Field of southwestern Virginia and the greater Central Appalachian Basin. This project was led by Dr. Nino Ripepi of the Virginia Center for Coal and Energy Research (VCCER) in close collaboration with EnerVest Operating LLC (EnerVest). VCCER is housed in the Department of Mining and Minerals Engineering at Virginia Tech and was created by an Act of the Virginia General Assembly on March 30, 1977, as an interdisciplinary study, research, information, and resource facility for the Commonwealth of Virginia. EnerVest is a top tier, low-cost oil and natural gas company with a long history of traditional operating relationships with institutional investors as well as public and private companies. This report summarizes two major research activities: 1) Log and Core Analysis and 2) Numerical Modeling. Core analysis comprises the characterization efforts of the ESUP Field Laboratory and includes a discussion of the well logs run in the deep characterization wells, an initial analysis of those, the number, size and location of cores recovered, core testing and analysis done to date as well as plans for future analysis. Numerical modeling is comprised of seven major modeling efforts, including (1) Multiphysics shale transport modeling work, (2) the developed in-house compositional simulator studies, (3) reservoir modeling studies using GEM software, (4) fracture modeling work using EFRAC3D software and (5) numerical modeling efforts with ABAQUS software, (6) Numerical modeling efforts using FLAC3D and PFC3D, and (7) Automatic Machine Learning (AutoML) Studies.

02 PETROLEUM↗

Structure, nanomechanics, and dynamics of dispersed surfactant‐free clay nanocomposite films

The current work presents a new approach to achieve high quality dispersion of surfactant‐free nanoclay tactoid particles in sub‐micron thin films despite the absence of organic modifier. Natural Montmorillonite particles, Cloisite, were dispersed in thin films of polycaprolactone (PCL) through a flow coating technique assisted by ultra‐sonication. Wide‐angle X‐ray scattering (WAXS), grazing‐incidence wide‐angle X‐ray scattering (GI‐WAXS), and transmission electron microscopy (TEM) were used to confirm the level of natural clay dispersion down to the level of tactoids (sub‐micron scale stacks of clay sheets). These characterization techniques were carried out in conjunction with an analysis of nanomechanical properties via strain‐induced buckling instability for modulus measurements (SIEBIMM), a high‐throughput technique to characterize thin film mechanical properties. The buckling patterns indicate that the natural clay tactoids separate buckling‐enhancing (high‐modulus) crystalline regions and interconnect buckling‐suppressing amorphous (low‐modulus) regions. Due to the tactoid length scale, the glass transition behavior of the composites as characterized by broadband dielectric relaxation spectroscopy was unmodified by the clay. Likewise, the glass transition temperature, T g , and fragility (slope of relaxation time behavior approaching T g ), remain unaffected, indicating that these dispersed tactoids do not induce pronounced confinement effects on dynamics. POLYM. ENG. SCI., 58:1285–1295, 2018. © 2018 Society of Plastics Engineers

Zhang, Xiao↗

CCSI Toolset 3.20 Release

CCSI Toolset 3.20 Release Highlights Minimum Viable Product surrogate plugin was added for creating Machine Learning/Artificial Intelligence models. Corresponding documentation was added for the plugin. Sequential Design of Experiments plots were updated to eliminate an issue with the window stack ordering upon closure of the plots. Support for Python 3.7 was removed. Documentation was improved by adding new mandatory section to the ReadTheDocs configuration and adding installation instructions back for NLOpt. TurbineLite was updated to 3.0.0, which is compatible with SimSinter 3.0.0. The developer environment was updated and 32-bit support was removed. SimSinter was updated to 3.0.0. This version removed gPROMS support and included security updates.

AS↗

Noncomposite Counterelectrode Development

New counter electrode materials under development at NREL have the potential to positively impact electrochromic window technology. The current generation of nanocomposite materials is designed to provide rapid transport of lithium ions to nanoparticles of anodic coloring materials. They may improve the coloration efficiency of the entire films stack while also improving the speed and depth of coloration. We expect an added benefit of greater film durability. To date, encouraging results have been obtained in the laboratory. Performance and durability tests will be carried out to characterize any improvements obtained as a result of the new counter electrode materials. In addition to process improvement, the project also has the secondary goal of improving the basic understanding of the electrochromic process in Sage?s counter electrode.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗