Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sprays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The effect of high-power transient events on tungsten and tungsten coatings used for radio frequency launcher applications

High-temperature plasma-facing material coatings used for radio frequency (RF) launchers need to be robust enough to survive RF breakdown arcing or other transient events from the plasma (e.g., an edge localized mode) without causing a catastrophic failure of the coating. High-power transient effects are being explored by using an RF-induced vacuum arc to determine the robustness of tungsten coatings made by a variety of manufacturing methods. A 1/4-wavelength resonant section of vacuum transmission line terminated with an open circuit electrode structure with a well-defined electric field (30-60 kV/mm) produces repeatable arcing conditions. The initial focus is on tungsten as a plasma-facing material, including sintered tungsten, tungsten coatings on steel produced via physical vapor deposition (PVD), and functionally graded tungsten/steel coatings deposited by low-pressure plasma-spraying (LPPS). Thin PVD coatings (1-2 microns) fail catastrophically from an arc and result in severe delamination of the coating. The arc-induced damage of thicker coatings, such as those made via LPPS, tend to be restricted to the top few microns of the surface. Arcing often initiates on sharp surface microstructures and causes localized melting of tungsten at the surface of all the materials studied and results in resolidified melt pools with surface cracks. The resolidified surface results in a reduction in overall deuterium retention when exposed to typical RF plasma sheath conditions.

Caughman, John [ORNL] (ORCID:0000000206091164)↗
DOE OSTI2020

Investigation of flow regimes in arc plasma–gas interactions using a two-temperature arc in crossflow model

The perpendicular impingement of a gas stream on an electric arc, a configuration known as the arc in crossflow, is of primary relevance in the study of plasma-gas interactions, as well as in industrial applications such as circuit breakers and wire-arc spraying. The flow dynamics in the arc in crossflow are the result of coupled fluid-thermal-electromagnetic phenomena accompanied by large property gradients, which can produce significant deviations from Local Thermodynamic Equilibrium (LTE) among electrons and gas species. These characteristics can lead to the establishment of distinct flow regimes depending on the relative values of the controlling parameters of the system, such as inflow velocity, arc current, and inter-electrode spacing. A two-temperature non-LTE (NLTE) model is used to investigate the arc dynamics and the establishment of flow regimes in the arc in crossflow. The plasma flow model is implemented within a nonlinear Variational Multiscale (VMS) numerical discretization approach that is less dissipative, and hence better suited to capture unstable behavior, than traditional VMS methods commonly used in computational fluid dynamics simulations. The Reynolds and the Enthalpy dimensionless numbers, characterizing the relative flow strength and arc strength, respectively, are chosen as the controlling parameters of the system. Simulation results reveal the onset of dynamic behavior and the establishment of steady, periodic, quasi-periodic, and chaotic or potentially turbulent, regimes, as identified by distinct spatiotemporal fluctuations. The computational findings reveal the role of increasing the relative arc strength on enhancing flow stability by delaying the growth of fluctuating and unstable flow behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The effect of substrate temperature on the critical velocity in microparticle impact bonding

A number of nascent coating and micromanufacturing processes involve particles sprayed at a high velocity, which impact a substrate, deform, and adhere. Successful bonding between the particles and the substrate requires impact velocities higher than the so-called critical adhesion velocity. This critical velocity is influenced by the temperature of the substrate, a variable that we isolate in this work by conducting single-particle impacts on a variable-temperature substrate for three systems (Al–Al, Sn–Sn, and Ti–Ti) with particles individually selected within a narrow size distribution. Our results quantitatively connect the increase in substrate temperature to a significant lowering of the critical velocity, which we attribute to the lower dynamic strength of the thermally softened substrate. The data are generally consistent with expectations for bonding being controlled by a hydrodynamic process of jetting upon impact.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-speed impact of micron-sized diesel drop trains—Splashing dynamics, secondary droplet formation, and effects of pre-existing film thickness

This work investigates surface impingement of monodispersed diesel drop trains using computational simulations. The three-dimensional simulations include high-speed impact of micrometer-sized fuel drops onto initially dry and wetted stainless steel substrates. The drop size and impact velocity are representative of fuel injection conditions in internal combustion engines (ICEs). The drop trains serve as a simplified representation of fuel spray. To accurately capture the film that naturally develops on initially dry substrates, a dynamic diesel-stainless steel contact angle model was developed using experiments of single drop impact under ICE representative temperature. Simulations are presented for a highly splashing case and the effects of a pre-existing film on splashing dynamics were investigated, including the temporal evolution of splashed mass and film thickness. It was concluded that for thin films, the effect of pre-existing film thickness is less significant than in single drop impingement. Secondary droplet characterization was performed on simulation results, leading to instantaneous and time-averaged distributions of secondary droplet size, velocity magnitude, and trajectory angle. It was found that for each drop impingement, approximately 58% of the splashed mass is from the impinging drop itself, while the remainder of the splashed mass is composed of film liquid. From a high resolution case, details of secondary droplet formation are observed and three distinct phases of secondary droplet formation are identified. The detailed analysis of drop train impingement under engine-relevant conditions serves as a first step toward a robust understanding of fuel impingement and the development of cleaner and more efficient ICEs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Simulating the filamentation of smoothed laser beams with three-dimensional nonlinear dynamics

In a plasma, the ponderomotive force of an inhomogeneous electromagnetic field expels plasma from regions of high intensity. When a laser propagates through a plasma, this force creates density wells that subsequently modify the index of refraction. The beam refracts and focuses into these wells and may filament. In extreme cases, the laser beam will spray due to increasing angular divergence of the beam. The threshold for ponderomotive self-focusing is well established for isolated laser hotspots or speckles. Here, we define a practical threshold for characterizing the filamentation of thousands of speckles that are found in the focal plane of high-power laser beams spatially smoothed with random phase plates as used at high energy and power laser facilities studying inertial confinement fusion. This threshold is tested against three-dimensional simulations of speckled laser light propagating through plasma. Four metrics are applied to assess filamentation: the fraction of power above five times the average intensity, an effective f-number, the mean-squared perpendicular wavenumber, and the fraction of rarefied density with deviation from the initial density exceeding | δn/ n| = 0.1. The speckled beams studied are generated by random phase plates, both with and without additional polarization smoothing, in a parameter regime of relevance to indirect drive experiments. While filamentation has been discussed extensively in the literature, we believe this to be the first published simulation study with three-dimensional nonlinear hydrodynamics that addresses the onset threshold of ponderomotive filamentation and establishes the lengths and time scales necessary to reach a statistical steady state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Measurement of laser absorption in underdense plasmas using near-field imaging of the incident and transmitted beams

Measurements of laser absorption in high-temperature, underdense plasmas produced at the Omega Laser Facility are made using two near-field imaging detectors that diagnose the spatial profile and energy of the port P9 beam before and after it transmits through the plasma. The incident beam is sampled using a partial reflection from a full-aperture, (30 cm-diam) uncoated wedge pickoff located before the target chamber vacuum window and final focus lens assembly. A concave mirror reduces the reflected beam size, allowing it to be recorded directly using a charged-coupled device (CCD) camera. The P9 transmitted beam diagnostic (P9TBD) characterizes the transmitted light by terminating the expanded beam on a semi-transparent diffuser and imaging the illuminated surface using a lens and CCD camera. The P9TBD samples a numerical aperture twice as large as the input beam, allowing the energy of transmitted beams with moderate levels of beam spray to be measured accurately. Calibration shots with no plasma provide a path to infer absorption without absolute photometric calibration of either detector. Lastly, the cross-calibration between the two detectors was measured to remain stable at ±200 ppm, enabling measurements of total beam absorption below 1% with ±0.07% error.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

On the effect of mixing-driven vaporization in a homogeneous relaxation modeling framework

The homogeneous relaxation model (HRM) is one of the most widely used models to describe the liquid–gas phase transition in multiphase flows due to the occurrence of cavitation. However, in its original formulation, the HRM does not account for the presence of ambient gas species, which generally limits its applicability to the injector's internal flow where ambient gases are negligible. In this work, a mixing-driven vaporization (MDV) model was developed to extend the capability of the HRM in handling the mixing effect in the regions external to the nozzle, where vapor–liquid equilibrium for multi-species mixtures of fuel and ambient gas is considered. Herein, to assess the model performance, simulations of the Engine Combustion Network's Spray G injector were performed with the HRM and the MDV model under both flash-boiling and evaporating conditions. It was found that the MDV model led to a better match against x-ray measurements of fuel density in the near-nozzle region. In contrast to the HRM, the MDV model was able to reproduce the vaporization process in the mixing zone at the edge of the fuel jet, which aligns with the expected physics. This resulted in substantial differences in the prediction of other flow characteristics such as mixture temperature and pressure. Furthermore, this work demonstrates that evaporation timescales have a considerable effect on the MDV model's predictions, as shown by a parametric study in which a time factor was introduced to mimic the effect of different timescales due to different phase change mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Shock state distributions in porous tantalum and characterization with multipoint velocimetry

Heterogenous materials under shock compression can be expected to reach different shock states throughout the material according to local differences in microstructure and the history of wave propagation. Here, in this work, a compact, multiple-beam focusing optic assembly is used with high-speed velocimetry to interrogate the shock response of porous tantalum films prepared through thermal-spray deposition. The distribution of particle velocities across a shocked interface is compared to results obtained using a set of defocused interferometric beams that sampled the shock response over larger areas. The two methods produced velocity distributions along the shock plateau with the same mean, while a larger variance was measured with narrower beams. The finding was replicated using three-dimensional, mesoscopically resolved hydrodynamics simulations of solid tantalum with a pore structure mimicking statistical attributes of the material and accounting for radial divergence of the beams, with agreement across several impact velocities. Accounting for pore morphology in the simulations was found to be necessary for replicating the rise time of the shock plateau. The validated simulations were then used to show that while the average velocity along the shock plateau could be determined accurately with only a few interferometric beams, accurately determining the width of the velocity distribution, which here was approximately Gaussian, required a beam dimension much smaller than the spatial correlation lengthscale of the velocity field, here by a factor of ∼30×, with implications for the study of other porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Adhesion and tribological characteristics of modified polyurethane coating on composite substrate

In the present study, glass-epoxy composites were used as a substrate to study the performance of modified polyurethane coating. Two-layer coating (180–200 µm) wherein the epoxy primer as the first coat and polyurethane as the top coat was applied using an air-assisted spray gun to increase the service life of the composite. The analysis of coating was performed using gloss, contact angle, FTIR, TGA, tensile test and SEM. The bonding strength between coating and substrate was evaluated by cross-hatch cut, 180 deg peel strength and pull-off adhesion tests. Scratch, Taber abrasion and Pin-on-disc tests were also performed to evaluate the wear resistance. In addition, a rain erosion test was performed to check the stability of the coating. From the above tests, it is concluded that the applied coating well adhered to the composite substrate. The data generated from different tests can be used to estimate the service life of polymer composites and coatings.

Mushtaq, Mohammed↗
DOE OSTI2024

Effect of viral infection on the ice nucleation efficiency of marine coccolithophores

A marine coccolithophore (Emiliania huxleyi) and coccolithovirus (EhV-207) were grown together in a marine aerosol reference tank (MART) to investigate how the viral lysis of phytoplankton affects the formation of immersion mode ice nucleating particles (INPs) in sea spray aerosol (SSA). The mean ice nucleation temperatures of SSA produced during viral infection were slightly lower (–28.5 °C) than pre-viral infection (–27.5 °C). Ice nucleation temperatures were relatively low, indicating that organic matter from E. huxleyi is less effective as an INP than phytoplankton examined in previous studies. E. huxleyi is covered in calcium carbonate coccoliths and contains high intracellular concentrations of dimethylsulfoniopropionate (DMSP). The ice nucleation efficiencies of purified components were measured to better understand this model system. Purified coccoliths were moderately effective INPs (–25.3 ± 0.4 °C at 5 x 10 2 mg L -1 (mean ±pooled SD)) that showed a concentration effect, with lower freezing temperatures at lower concentrations. Coccoliths and DMSP were both weakly efficient INPs. In comparison, purified phytoplankton viruses (EhV-207 and CtenRNAV-01) infecting coccolithophores and diatoms, respectively, did not affect freezing at temperatures warmer than the procedural blank. Our results suggest that E. huxleyi, in contrast to diatoms and cyanobacteria, is not a significant source of immersion mode INPs to the marine atmosphere, despite its broad distribution in the global ocean and large-scale bloom formation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Thermo-Mechanical Distortion of Tungsten-Coated Steel During High Heat Flux Testing Using Plasma Arc Lamps

An experimental setup and a test section were designed and fabricated for high heat flux testing (HHFT) of neutron-irradiated specimens using water-wall plasma arc lamps. Because of the radiological considerations and limitations of reactor irradiation, the size of the test articles was limited to disks less than 10 mm in diameter. The specimen was clamped onto an actively cooled block, and clamping allowed the insertion of several thermocouples on the back surface of the specimen through a copper (Cu) block. Five vacuum plasma sprayed tungsten (W)–coated F82H steel specimens were subjected to HHFT. Surface profilometry measurements, which were conducted after HHFT, revealed central bowing of the top W surface. This type of residual distortion occurred for all of the specimens, and the larger the specimens were, the larger was the distortion.In an attempt to understand specimen distortion and address the science questions related to the testing of subsize specimens during HHFT, a simplified thermo-mechanical model was developed. By using a measured temperature in the Cu as an isothermal boundary condition, the model eliminated the need for coupling cooling fluid flow models with stress models, greatly simplifying the analysis. The main variable in the proposed model is hC, i.e., the thermal contact conductance between the F82H and the Cu washer. Inelastic properties, including hardening properties, were considered for F82H steel and Cu. Numerical simulation results demonstrated a buildup of residual deformation during HHFT and a very complex state of stress and deformation during typical heat flux (HF) cycling. Additionally, hoop stress evolution during a high heat flux cycle reveals that F82H at an interface with W would be mainly in compression during HF application and experienced a transition to a tension state during cooldown. Also, specimen distortion evolves during each HF cycle, as the specimen bows downward during HF application and upward during the cooldown period between HF cycles. The final specimen distortion, i.e., upward bowing of the specimen center, was qualitatively predicted for hC values of 4000 to 5000 W/(m 2 ·K). This hC range of values, for which bulging is obtained, is at the lower spectrum of the range of values for hC, consistent with the low thermal contact conductance expected from the unpolished F82H surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Robust two-colour pyrometry uncertainty analysis to acquire spatially-resolved measurements

Two-colour pyrometry (2CP) has been used over several decades to study engine-relevant combustion processes, but results are generally regarded as qualitative or semi-quantitative. In many current 2CP systems, large measurement errors are introduced by parallax because the two measured wavelengths are not from the same line of sight. Here this work presents a spatially-resolved 2CP system with the objective of quantifying and reducing measurement uncertainty. An optical setup that eliminates parallax in 2CP is used together with pixel-by-pixel calibration of the camera sensor to increase measurement accuracy. Primary uncertainty terms are identified, and an error propagation analysis is performed to compute uncertainties in the final results of soot temperature, soot concentration parameter, KL, and soot mass. These methodologies are applied to investigate an auto-igniting fuel spray in a constant pressure flow rig at diesel-like conditions of high ambient pressure and temperature. Results show bias uncertainty of around 200 K (≈10%) for temperature and about 40%–60% for KL. High uncertainty was found to occur on the diffusion flame front where both optical thickness and soot concentrations are small. However, these uncertain measurement zones with relatively low soot concentrations contribute minimally to the total soot mass present in the reacting jet during the temporal evolution of the flame.

42 ENGINEERING↗
DOE OSTI2024

A method to observe field-region oxide charge and inter-electrode isolation from CV-characteristics of n-on-p devices

Abstract N-on-psilicon sensors will be utilized in the Compact Muon Solenoid (CMS) detector's tracker and High Granularity Calorimeter (HGCAL) in the High Luminosity upgrade of the Large Hadron Collider (HL-LHC). Among their several advantages in terms of radiation hardness over the traditionalp-on-nsensors in the extreme radiation environment of the HL-LHC are electron collection instead of holes and overlapping maxima of weighting and electric fields at the charge-collecting electrodes. The disadvantage of the multi-channel SiO 2 -passivatedn-on-psensors is the generation of an inversion layer under the Si/SiO 2 -interface by a positive interface-oxide-charge (N ox ) that at high densities can compromise the position resolution by creating a conduction channel between the electrodes. This issue is typically addressed by including additional isolnts (p-stp,p-spray) between n + -electrodes. Focusing on the guard-ring regions ofn-on-psensors where no isolation implants are applied between the electrodes, a capacitance-voltage (CV) characterization study of both 6-inch wafer test diodes and 8-inch HGCAL prototype and pre-series sensors showed a distinct threshold voltage (V th,iso ) in theCV-characteristics of a biased n + -electrode when its enclosing guard-ring was left floating. When reproduced by simulations, the measuredV th,iso was found to contain information on the field-regionN ox and indicate the threshold where the two electrodes become electrically isolated by the influence of the reverse bias voltage. Together with previous studies on the inter-electrode isolation of irradiatedn-on-psensors, the results indicate that position sensitiven-on-psensors without isolation implants may be feasible in future HEP experiments.

Instruments & Instrumentation↗
DOE OSTI2026

Wasserstein normalized autoencoder for anomaly detection

A novel anomaly detection algorithm is presented. The Wasserstein normalized autoencoder (WNAE) is a normalized probabilistic model that minimizes the Wasserstein distance between the learned probability distribution—a Boltzmann distribution where the energy is the reconstruction error of the autoencoder (AE)—and the distribution of the training data. This algorithm has been developed and applied to the identification of semivisible jets—conical sprays of visible standard model (SM) particles and invisible dark matter states—with the CMS experiment at the CERN LHC. Trained on jets of particles from simulated SM processes, the WNAE is shown to learn the probability distribution of the input data in a fully unsupervised fashion, such that it effectively identifies new physics jets as anomalies. The model exhibits stable, convergent training and recovers strong classification performance for a wide range of signals against the selected background process, for which a standard AE fails because of outlier reconstruction. In addition, the model improves upon standard normalized autoencoders while remaining fully agnostic to the signal. The WNAE directly tackles the problem of outlier reconstruction, a common failure mode of autoencoders in anomaly detection tasks.

Hayrapetyan, Aram [Yerevan Phys. Inst.]↗
DOE OSTI2024

Time-resolved cryogenic electron tomography for the study of transient cellular processes

Cryogenic electron tomography (cryo-ET) is the highest resolution imaging technique applicable to the life sciences, enabling sub-nanometer visualization of specimens preserved in their near native states. The rapid plunge freezing process used to prepare samples lends itself to time-resolved studies, which researchers have pursued for in vitro samples for decades. Here, we focus on developing a freezing apparatus for time-resolved studies in situ. The device mixes cellular samples with solution-phase stimulants before spraying them directly onto an electron microscopy grid that is transiting into cryogenic liquid ethane. By varying the flow rates of cell and stimulant solutions within the device, we can control the reaction time from tens of milliseconds to over a second prior to freezing. In a proof-of-principle demonstration, the freezing method is applied to a model bacterium, Caulobacter crescentus, mixed with an acidic buffer. Through cryo-ET we resolved structural changes throughout the cell, including surface-layer protein dissolution, outer membrane deformation, and cytosolic rearrangement, all within 1.5 seconds of reaction time. This new approach, Time-Resolved cryo-ET (TR-cryo-ET), enhances the capabilities of cryo-ET by incorporating a sub-second temporal axis and enables the visualization of induced structural changes at the molecular, organelle, or cellular level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A Biomass Pyrolysis Oil as a Novel Insect Growth Regulator Mimic for a Variety of Stored Product Beetles

Abstract As fumigants face increasing regulatory restrictions, resistance, and consumer pushback, it is vital to expand the integrated pest management (IPM) chemical toolkit for stored products. The production of biomass derived insecticides (e.g., bio-oil fraction) from byproducts of biofuel production may be a promising alternative source of chemistries for controlling stored product insects. These potential insecticidal bio-oils were fractionated based on boiling points (ranging from 115 to 230°C in one series and 245–250°C in another). Fractions were analyzed using GC-MS, and were found to be unique in composition. The lethality of these fractions was tested on Tribolium castaneum, Tribolium confusum, and Oryzaephilus surinamensis (L.) (Coleoptera: Silvanidae). Fractions were tested at concentrations ranging from 5–260 mg/ml to screen for efficacy against adults for durations of 2–8 hr sprayed on concrete arenas. In addition, a separate assay evaluated adult emergence of larvae after 6 wk with supplemental food in arenas, while repellency was evaluated against four stored product insect species in a laminar wind tunnel. A greenhouse gas (GHG) emissions life cycle assessment was also performed, which found the use of the bio-oil fraction could reduce GHG emissions associated with the insecticide supply chain by 25–61% relative to a fossil-fuel based insecticide or pyrethroid. While adults were largely unaffected, we found that larval emergence was significantly suppressed compared to controls by roughly half or more. We also determined that there was minimal repellency to most fractions by most species. We conclude that the use of bio-oil fractions is a climate-friendly choice that may support IPM programs.

09 BIOMASS FUELS↗
DOE OSTI2023

Modulation of polar auxin transport identifies the molecular determinants of source–sink carbon relationships and sink strength in poplar

Abstract Source-to-sink carbon (C) allocation driven by the sink strength, i.e., the ability of a sink organ to import C, plays a central role in tissue growth and biomass productivity. However, molecular drivers of sink strength have not been thoroughly characterized in trees. Auxin, as a major plant phytohormone, regulates the mobilization of photoassimilates in source tissues and elevates the translocation of carbohydrates toward sink organs, including roots. In this study, we used an ‘auxin-stimulated carbon sink’ approach to understand the molecular processes involved in the long-distance source–sink C allocation in poplar. Poplar cuttings were foliar sprayed with polar auxin transport modulators, including auxin enhancers (AE) (i.e., IBA and IAA) and auxin inhibitor (AI) (i.e., NPA), followed by a comprehensive analysis of leaf, stem and root tissues using biomass evaluation, phenotyping, C isotope labeling, metabolomics and transcriptomics approaches. Auxin modulators altered root dry weight and branching pattern, and AE increased photosynthetically fixed C allocation from leaf to root tissues. The transcriptome analysis identified highly expressed genes in root tissue under AE condition including transcripts encoding polygalacturonase and β-amylase that could increase the sink size and activity. Metabolic analyses showed a shift in overall metabolism including an altered relative abundance levels of galactinol, and an opposite trend in citrate levels in root tissue under AE and AI conditions. In conclusion, we postulate a model suggesting that the source–sink C relationships in poplar could be fueled by mobile sugar alcohols, starch metabolism-derived sugars and TCA-cycle intermediates as key molecular drivers of sink strength.

59 BASIC BIOLOGICAL SCIENCES↗