Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Chemical Evidence for Smectites and Zeolites on Mars: Criteria and Limitations

Aqueous alteration on Mars can produce a range of tell-tale secondary minerals [1]. Surface missions typically obtain detailed and highly localized element compositional information, but not always mineralogical information, whereas orbital missions deduce mineralogy from relatively high spatial resolution IR spectral mapping (decameters scale, for CRISM), but obtain element data only over much larger areas of martian terrain (~200 km). Surface missions have also discovered several occurrences of major geochemical alteration of igneous precursors, for many of which elemental compositional is the only diagnostic information available. Many types of clays and zeolites have quasi-unique element profiles which may be used to implicate their presence. In some cases, one or more candidate minerals are sufficiently close in their component elements and their stoichiometry that ambiguity must remain, unless other constraints can be brought to bear. Geochemical characteristics of alteration products most likely on Mars can be compared to results from MER and MSL rover missions (e.g. Independence [4] and Esperance samples). These considerations are needed for MER Opportunity rover now that Mini-TES is no longer operational. It also has importance for exploration by the MSL Curiosity rover because inferences and deductions available from ChemCam (CCAM) remote LIBS and/or in situ x-ray fluorescence (APXS) can be used as indicators for triage to select materials to sample for limited-resource instruments, SAM and Chemin.

Clark, B. C.↗

Evaluation of Compton suppression for enhancing trace element identification in neutron activation analysis of reference materials

Neutron activation analysis (NAA) is a powerful technique for identifying and quantifying trace elements in materials. However, challenges such as high dead times, spectral interferences, and high Compton continuum often arise. This study employs a Compton suppression system (CSS) to enhance NAA sensitivity by reducing the Compton continuum, thereby improving the peak-to-Compton ratio. National Institute of Standards and Technology certified reference materials 1632d, 1633c, and Canadian National Research Council TORT-1 were irradiated in a thermal and epithermal neutron flux under various irradiation, decay and counting times and analyzed using high-resolution gamma-ray spectroscopy with and without Compton suppression. The reduction factor was calculated to evaluate the effectiveness of the CSS, demonstrating significant background reduction and improved detection limits for trace elements. Additional experiments with a 137Cs point source demonstrated the impact of detector-source geometry on system performance, showing a decrease in the reduction factor as the source was moved further from the NaI detector. An optimum distance between the source and HPGe detector was observed, yielding the highest peak-to-Compton ratio. The results highlight the CSS's ability to minimize spectral interference and enhance elemental identification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interior Noise Predictions in the Preliminary Design of the Large Civil Tiltrotor (LCTR2)

A prediction scheme was established to compute sound pressure levels in the interior of a simplified cabin model of the second generation Large Civil Tiltrotor (LCTR2) during cruise conditions, while being excited by turbulent boundary layer flow over the fuselage, or by tiltrotor blade loading and thickness noise. Finite element models of the cabin structure, interior acoustic space, and acoustically absorbent (poro-elastic) materials in the fuselage were generated and combined into a coupled structural-acoustic model. Fluctuating power spectral densities were computed according to the Efimtsov turbulent boundary layer excitation model. Noise associated with the tiltrotor blades was predicted in the time domain as fluctuating surface pressures and converted to power spectral densities at the fuselage skin finite element nodes. A hybrid finite element (FE) approach was used to compute the low frequency acoustic cabin response over the frequency range 6-141 Hz with a 1 Hz bandwidth, and the Statistical Energy Analysis (SEA) approach was used to predict the interior noise for the 125-8000 Hz one-third octave bands.

Grosveld, Ferdinand W.↗

Better Spectrometers, Beautiful Spectra and Confusion for All

The confluence of enormous improvements in submillimeter receivers and the development of powerful large scale observatories is about to force astrophysics and the sciences that support it to develop novel approaches for interpretation of data. The historical method of observing one or two lines and carefully analyzing them in the context of a simple model is now only applicable for distant objects where only a few lines are strong enough to be observable. Modern observatories collect many GHz of high signal-to-noise spectra in a single observation and in many cases, at sufficiently high spatial resolution to start resolving chemically distinct regions. The observatories planned for the near future and the inevitable upgrades of existing facilities will make large spectral data sets the rule rather than the exception in many areas of molecular astrophysics. The methodology and organization required to fully extract the available information and interpret these beautiful spectra represents a challenge to submillimeter astrophysics similar in magnitude to the last few decades of effort in improving receivers. The quality and abundance of spectra effectively prevents line-by-line analysis from being a time efficient proposition, however, global analysis of complex spectra is a science in its infancy. Spectroscopy at several other wavelengths have developed a number of techniques to analyze complex spectra, which can provide a great deal of guidance to the molecular astrophysics community on how to attack the complex spectrum problem. Ultimately, the challenge is one of organization, similar to building observatories, requiring teams of specialists combining their knowledge of dynamical, structural, chemical and radiative models with detailed knowledge in molecular physics and gas and grain surface chemistry to extract and exploit the enormous information content of complex spectra. This paper presents a spectroscopists view of the necessary elements in a tool for complex spectral analysis.

Spectral Analysis↗

Automated thematic mapping and change detection of ERTS-A images

The author has identified the following significant results. In the first part of the investigation, spatial and spectral features were developed which were employed to automatically recognize terrain features through a clustering algorithm. In this part of the investigation, the size of the cell which is the number of digital picture elements used for computing the spatial and spectral features was varied. It was determined that the accuracy of terrain recognition decreases slowly as the cell size is reduced and coincides with increased cluster diffuseness. It was also proven that a cell size of 17 x 17 pixels when used with the clustering algorithm results in high recognition rates for major terrain classes. ERTS-1 data from five diverse geographic regions of the United States were processed through the clustering algorithm with 17 x 17 pixel cells. Simple land use maps were produced and the average terrain recognition accuracy was 82 percent.

Gramenopoulos, N.↗

Charge exchange recombination spectroscopy on the T-10 tokamak

The charge exchange recombination spectroscopy (CXRS) diagnostics on the T-10 tokamak is described. The system is based on a diagnostic neutral beam and includes three high etendue spectrometers designed for the ITER edge CXRS system. A combined two-channel spectrometer is developed for simultaneous measurements of two beam-induced spectral lines using the same lines of sight. A basic element of the combined spectrometer is a transmitting holographic grating designed for the narrow spectral region 5291 ± 100 Å. The whole CXRS system provides simultaneous measurements of two CXRS impurity spectra and H{sub α} beam line. Ion temperature measurements are routinely provided using the C{sup 6+} CXRS spectral line 5291 Å. Simultaneous measurements of carbon densities and one more impurity (oxygen, helium, lithium etc.) are carried out. Two light collecting systems with 9 lines of sight in each system are used in the diagnostics. Spatial resolution is up to 2.5 cm and temporal resolution of 1 ms is defined by the diagnostic neutral beam diameter and pulse duration, respectively. Experimental results are shown to demonstrate a wide range of the CXRS diagnostic capabilities on T-10 for investigation of impurity transport processes in tokamak plasma. Developed diagnostics provides necessary experimental data for studying of plasma electric fields, heat and particle transport processes, and for investigation of geodesic acoustic modes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generalized Multiscale Inversion for Heterogeneous Problems

In this work, we propose a generalized multiscale inversion algorithm for heterogeneous problems that aims at solving an inverse problem on a computational coarse grid. Previous inversion techniques for multiscale problems seek a coarse-grid medium properties, e.g., permeability and conductivity, and by doing so, they assume that there exists a homogenized representation of the underlying fine-scale permeability field on a coarse grid. Generally such assumptions do not hold for highly heterogeneous fields, e.g., fracture media or channelized fields, where the width of channels are very small compared to the scale of coarse grids. In these cases, grid refinement can lead to many degrees of freedom, and thus numerically unattractive to apply. The proposed algorithm is based on the Generalized Multiscale Finite Element Method (GMsFEM), which uses local spectral problems to identify non-localized features, i.e., channels (high-conductivity inclusions that connect the boundaries of the coarse-grid block). The inclusion of these features in the coarse space enables one to achieve a good accuracy. The approach is valid under the assumption that the solution can be well represented in a reduced-dimensional space spanned by multiscale basis functions. In practice, these basis functions are non-observable as we do not identify the fine-scale features of the permeability field. Our inversion algorithm finds the discretization parameters of the resulting system on the coarse grid. By doing so, we identify the appropriate coarse-grid parameters representing the permeability field instead of fine-grid permeability field. We illustrate the potential of the approach by numerical results for fractured media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DFT-FE 1.0: A massively parallel hybrid CPU-GPU density functional theory code using finite-element discretization

In this work, we present DFT-FE 1.0, building on DFT-FE 0.6 [Comput. Phys. Commun. 246, 106853 (2020)], to conduct fast and accurate large-scale density functional theory (DFT) calculations (reaching ~ 100,000 electrons) on both many-core CPU and hybrid CPU-GPU computing architectures. This work involves improvements in the real-space formulation—via an improved treatment of the electrostatic interactions that substantially enhances the computational efficiency—as well high-performance computing aspects, including the GPU acceleration of all the key compute kernels in DFT-FE. We demonstrate the accuracy by comparing the ground-state energies, ionic forces and cell stresses on a wide-range of benchmark systems against those obtained from widely used DFT codes. Further, we demonstrate the numerical efficiency of our implementation, which yields ~ 20× CPU-GPU speed-up by using GPU acceleration on hybrid CPU-GPU nodes. Notably, owing to the parallel-scaling of the GPU implementation, we obtain wall-times of 80–140 seconds for full ground-state calculations, with stringent accuracy, on benchmark systems containing ~ 6, 000 – 15,000 electrons.

pseudopotential↗

Elemental Abundances in M31: Gradients in the Giant Stellar Stream

We analyze existing measurements of [Fe/H] and [α/Fe] for individual red giant branch (RGB) stars in the Giant Stellar Stream (GSS) of M31 to determine whether spatial abundance gradients are present. These measurements were obtained from low- (R ~ 3000) and moderate- (R ~ 6000) resolution Keck/DEIMOS spectroscopy using spectral synthesis techniques as part of the Elemental Abundances in M31 survey. From a sample of 62 RGB stars spanning the GSS at 17, 22, and 33 projected kpc, we measure a [Fe/H] gradient of -0.018 ± 0.003 dex kpc{sup -1} and negligible [α/Fe] gradient with M31-centric radius. We investigate GSS abundance patterns in the outer halo using additional [Fe/H] and [α/Fe] measurements for six RGB stars located along the stream at 45 and 58 projected kpc. These abundances provide tentative evidence that the trends in [Fe/H] and [α/Fe] beyond 40 kpc in the GSS are consistent with those within 33 kpc. We also compare the GSS abundances to 65 RGB stars located along the possibly related Southeast (SE) shelf substructure at 12 and 18 projected kpc. The abundances of the GSS and SE shelf are consistent, supporting a common origin hypothesis, although this interpretation may be complicated by the presence of [Fe/H] gradients in the GSS. We discuss the abundance patterns in the context of photometric studies from the literature and explore implications for the properties of the GSS progenitor, suggesting that the high ⟨[α/Fe]⟩ of the GSS (+0.40 ± 0.05 dex) favors a major merger scenario for its formation.

47 OTHER INSTRUMENTATION↗

Tunable Infrared Devices via Ferroelectric Domain Reconfiguration

Despite widespread use in sensing, electro–optics, and catalysis, plasmonic elements are typically static in their spectral response. The subwavelength spatial confinement and enhanced electric fields intrinsic to plasmons provide a lever to realize dynamic spectral tunability—and thus multifunctional optical components—as small alterations in their dielectric environment are amplified by these effects. Here, electric–field (DC) control of phonon modes is leveraged in lead zirconate titante (PZT) ferroelectric bilayers to create tunable long–wave infrared (LWIR) plasmonic devices that demonstrate a combination of advantages—speed (>10 kHz), latching, and low–power switching (<1 µJ mm –2 )—unavailable together in approaches reported heretofore. Mechanistically, bias–induced domain reconfiguration alters the phonon energies defining PZT's optical permittivity, which determines the gap plasmon formed within the ferroelectric resting between patterned metal contacts. Furthermore the utility of ferroelectrics for tunable plasmonic devices is thus demonstrated while highlighting the promise of leveraging phonons for these purposes.

47 OTHER INSTRUMENTATION↗

4-quinolin-8-yloxy Linked Triphenylamine Based Polyimides: Blue Light Emissive and Potential Hole-Transport Materials

A series of fluorescent donor- acceptor (D-A) alternating copolyimides (P1, P2, P3 and P4) with 4-quinolin-8-yloxy linked triphenylamine main polymer chain have been synthesized by conventional polycondensation. All the synthesized co-polyimides were characterized by elemental, gel permeation chromatography and FTIR spectral analysis. These newly prepared PIs possess HOMO energy levels in range of − 4.74 to − 4.78 eV and have medium optical band gaps. The photoluminescence spectral analysis revealed blue to violet emission with appreciable efficiency with lower onset oxidation potentials suitable for the facile hole injection materials. All the photophysical and electrochemical properties were also explored in context of effect of the pendant 4- quinolin-8-yloxy, indicating suitable combination of donor (TPA) on one hand and imide and pendant as acceptor on both ends.Graphical Abstract .

74 ATOMIC AND MOLECULAR PHYSICS↗

Chemical variability in mineralized veins observed by ChemCam on the lower slopes of Mount Sharp in Gale crater, Mars

ChemCam has observed a wide range of diagenetic features along the Curiosity rover traverse including pervasive Ca-sulfate veins. Observations by multiple instruments on Curiosity indicate that these veins are hydrated, formed during diagenetic fluid event(s). In this study, we delve into the chemical variability in these Ca-sulfate bearing veins and have identified two subsets in the Murray formation with enrichments in Fe and Fe + Mg. These chemical trends do not reflect a sampling mixture with the surrounding host rock but likely indicates the presence of authigenic phases formed during the emplacement of these veins. Based on passive reflectance spectral analysis and correlation with other elements, Fe 3+ oxides and/or sulfates are proposed to account for the Fe-rich observations in the vicinity of the Naukluft Plateau whereas the Fe + Mg trend is also observed in adjacent dark-toned features with elevated Mn and P near the Old Soaker outcrop. In conclusion, the specific localization of these observations in the Gale stratigraphy implies changing pH and redox conditions in the groundwater at the time of formation of these veins, from oxidizing and likely more acidic near the Naukluft Plateau to more reducing conditions in the upper part of the Murray formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The R-Process Alliance: Hunting for gold in the near-UV spectrum of 2MASS J05383296–5904280

Over the past few years, the R-Process Alliance (RPA) has successfully carried out a search for stars that are highly enhanced in elements produced via the rapid neutron-capture (r-) process. In particular, the RPA has identified a number of relatively bright, highly r-process-enhanced (r-II) stars, suitable for observations with the Hubble Space Telescope (HST), facilitating abundance derivation of elements such as gold (Au) and cadmium (Cd). This paper presents the detailed abundances derived for the metal-poor ([Fe/H] = −2.55) highly r-process-enhanced ([Eu/Fe] = +1.29) r-II star 2MASS J05383296–5904280. One-dimensional local thermodynamic equilibrium (LTE) elemental abundances were derived via equivalent width and spectral synthesis using high-resolution high signal-to-noise near-UV HST/STIS and optical Magellan/MIKE spectra. Abundances were determined for 43 elements, including 26 neutron-capture elements. In particular, abundances of the rarely studied elements Nb, Mo, Cd, Lu, Os, Pt, and Au are derived from the HST spectrum. These results, combined with RPA near-UV observations of two additional r-II stars, increase the number of Cd abundances derived for r-process-enriched stars from seven to ten and Au abundances from four to seven. A large star-to-star scatter is detected for both of these elements, highlighting the need for more detections enabling further investigations, specifically into possible non-LTE effects.

chemically peculiar stars↗

The Maia Spectroscopy Detector System: Engineering for Integrated Pulse Capture, Low-Latency Scanning and Real-Time Processing

The Maia detector system is engineered for energy dispersive x-ray fluorescence spectroscopy and elemental imaging at photon rates exceeding 10{sup 7}/s, integrated scanning of samples for pixel transit times as small as 50 {micro}s and high definition images of 10{sup 8} pixels and real-time processing of detected events for spectral deconvolution and online display of pure elemental images. The system developed by CSIRO and BNL combines a planar silicon 384 detector array, application-specific integrated circuits for pulse shaping and peak detection and sampling and optical data transmission to an FPGA-based pipelined, parallel processor. This paper describes the system and the underpinning engineering solutions.

43 PARTICLE ACCELERATORS↗

Intermediates of CO oxidation on iron oxides: An experimental and theoretical study

Reactions of laser-ablated iron oxides with CO in excess argon are investigated by infrared adsorption spectroscopy and density functional theoretical calculations. The carbonyl iron oxides OFe(CO){sub n} (n= 1-3) and O{sub 2}Fe(CO){sub m} (m= 1, 2) are generated during sample deposition or annealing, whereas CO{sub 2} is greatly produced at the expense of these carbonyl iron oxides upon UV irradiation, showing the formation of intermediate carbonyl iron oxides in the oxidation of carbon monoxide to carbon dioxide. These intermediate carbonyl iron oxides are characterized on the basis of isotopic substitution, stepwise annealing, change of CO concentration and laser energy, and comparison with theoretical calculations. The overall agreement between the experimental and calculated vibrational frequencies, relative absorption intensities, and isotopic shifts supports the identification of these complexes from the matrix infrared spectra. The reaction pathways for the formation of the products are proposed based on the experimental and theoretical results presented.

36 MATERIALS SCIENCE↗

Spectral diagnostics based on Doppler-broadened H{sub α} line shape in a single element of a matrix source

The study is on optical emission spectroscopy diagnostics of a single element of a matrix source of negative hydrogen ions. The method developed for description of the hydrogen atoms behaviour is based on analysis of the Balmer H{sub α} line profile, and it can be readily applied to various low pressure hydrogen discharges. The present observations reveal the existence of thermal as well as of non-thermal fast hydrogen atoms in the discharge. For processing of the experimental data a line shape model, which accounts for details of the plasma kinetics and the fine structure of the Balmer lines is developed. The fit of this model to the recorded at different experimental conditions line shapes results in the temperature of the thermal atoms, the mean energy of the fast atoms, the ratio between the densities of these two group of atoms and the relative populations of the fine structure components of the n = 3 hydrogen state. The present study indicates that the reactions leading to production of fast atoms and the process of energy exchange between thermal and fast atoms may be important for the correct modeling of the plasma kinetics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

KILOPARSEC-SCALE PROPERTIES OF EMISSION-LINE GALAXIES

We perform a detailed study of the resolved properties of emission-line galaxies at kiloparsec scales to investigate how small-scale and global properties of galaxies are related. We use a sample of 119 galaxies in the GOODS fields. The galaxies are selected to cover a wide range in morphologies over the redshift range 0.2 < z < 1.3. High resolution spectroscopic data from Keck/DEIMOS observations are used to fix the redshift of all the galaxies in our sample. Using the HST/ACS and HST/WFC3 imaging data taken as a part of the CANDELS project, for each galaxy, we perform spectral energy distribution fitting per resolution element, producing resolved rest-frame U – V color, stellar mass, star formation rate (SFR), age, and extinction maps. We develop a technique to identify ''regions'' of statistical significance within individual galaxies, using their rest-frame color maps to select red and blue regions, a broader definition for what are called ''clumps'' in other works. As expected, for any given galaxy, the red regions are found to have higher stellar mass surface densities and older ages compared to the blue regions. Furthermore, we quantify the spatial distribution of red and blue regions with respect to both redshift and stellar mass, finding that the stronger concentration of red regions toward the centers of galaxies is not a significant function of either redshift or stellar mass. We find that the ''main sequence'' of star-forming galaxies exists among both red and blue regions inside galaxies, with the median of blue regions forming a tighter relation with a slope of 1.1 ± 0.1 and a scatter of ∼0.2 dex compared to red regions with a slope of 1.3 ± 0.1 and a scatter of ∼0.6 dex. The blue regions show higher specific SFRs (sSFRs) than their red counterparts with the sSFR decreasing since z ∼ 1, driven primarily by the stellar mass surface densities rather than the SFRs at a given resolution element.

79 ASTRONOMY AND ASTROPHYSICS↗