Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

A new approach to evaluate temperature distribution and stress fracture within solid state lasers

This work presents a new approach to determine the maximum allowable pump power that causes fractures in solid-state lasers. By considering temperature-dependent-thermal conductivity, heat equation was solved and an analytical thermal model of laser diode double end-pumped cylindrical laser rod was deduced. Taking into account two unequal pump radii focused on each rod faces, the temperature distribution and thermal stresses components were calculated at the two end faces of the rod under top-hat pump profile. The results showed that at the maximum total pump power of 200 W (80 W on the right side and 120 W on the left side) the rod is subject to fracture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transformation of char carbon during bubbling fluidized bed gasification of biomass

This study focuses on the fate of carbon in the char generated by devolatilization of biomass during fluidized bed gasification. A carbon balance model was developed to distinguish between char transformed to carbon-bearing gases and its comminution and elutriation as fine char during gasification. The model accurately predicts the transient accumulation of char carbon in the reactor. Experiments revealed steady state reactor char carbon loadings were achieved after multiple hours of gasification. The model formed the basis of an experimental methodology that assesses the transformation of char carbon based on collection of elutriated solids from the reactor and assessment of the steady state char carbon loading in the reactor. Experiments were performed to distinguish the relative contributions of chemical reaction and physical comminution toward conversion of char to gaseous and solid products. The effects of equivalence ratio, gasification temperature, superficial gas velocity, biomass particle size, and the addition of steam on the partitioning of char carbon between gaseous and solid products during gasification of ground seed corn in a bubbling fluidized bed were investigated. This study revealed that char conversion during gasification of biomass was limited by elutriation of fine char particles arising from fragmentation or attrition of primary char product. Additionally, increased chemical reaction of char to form gases was usually accompanied by increased elutriation of fine char, which suggests that chemical reaction increased the porosity of the char and its susceptibility to fragmentation and attrition. Lastly, decreasing superficial gas velocity, increasing equivalence ratio, and decreasing particle size led to increased carbon conversion, while increasing temperature and steam concentration in the reactor had negligible effect.

09 BIOMASS FUELS↗

Gain characterization of LGAD sensors with beta particles and 28-MeV protons

Low Gain Avalanche Diodes, also known as LGADs, are widely considered for fast-timing applications in high energy physics, nuclear physics, space science, medical imaging, and precision measurements of rare processes. Such devices are silicon-based and feature an intrinsic gain due to a p + -doped layer that allows the production of a controlled avalanche of carriers, with multiplication on the order of 10–100. This technology can provide time resolution on the order of 20–30 ps, and variants of this technology can provide precision tracking too. The characterization of LGAD performance has so far primarily been focused on the interaction of minimum ionizing particles for high energy and nuclear physics applications. This article expands the study of LGAD performance to highly-ionizing particles, such as 28-MeV protons, which are relevant for several future scientific applications, e.g. in biology and medical physics, among others. These studies were performed with a beam of 28-MeV protons from a tandem Van de Graaff accelerator at Brookhaven National Laboratory and beta particles from a ^90Sr source; these were used to characterize the response and the gain of an LGAD as a function of bias voltage and collected charge. Here, the experimental results are also compared to TCAD simulations.

47 OTHER INSTRUMENTATION↗

Emergence of p+ip superconductivity in two-dimensional doped Dirac systems

Searching for the $p + ip$ superconducting (SC) state has become a fascinating subject in condensed matter physics recently, as a dream application awaiting in topological quantum computation. Unfortunately, so far there is no universal principle for realizing $p + ip$ in generic solid-state systems. Here we report a theoretical discovery of a $p + ip$ SC ground state (coexisting with ferromagnetic order) in the honeycomb lattice Hubbard model in the extremely strong-coupling limit (e.g., infinite U) at low doping $(δ < 0.2)$, by using both the state-of-art Grassmann tensor product state approach and a continuum quantum field theory approach. Our discovery suggests a mechanism for the $p + ip$ SC state in generic strongly correlated systems based on spin-charge separation and the charge current–current coupling scenario, which opens a door towards experimental realization. The $p + ip$ SC state has an instability towards a potential non-Fermi liquid with a large but finite U . Nevertheless, by applying an in-plane Zeeman field, such a $p + ip$ SC state can be stabilized with finite U in a very wide range of doping. Relevant realistic materials are also proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying the statistical complexity of low-frequency fluctuations in semiconductor lasers with optical feedback

Low-frequency fluctuations (LFFs) represent a dynamical instability that occurs in semiconductor lasers when they are operated near the lasing threshold and subject to moderate optical feedback. LFFs consist of sudden power dropouts followed by gradual, stepwise recoveries. We analyze experimental time series of intensity dropouts and quantify the complexity of the underlying dynamics employing two tools from information theory, namely, Shannon's entropy and the Martin, Plastino, and Rosso statistical complexity measure. These measures are computed using a method based on ordinal patterns, by which the relative length and ordering of consecutive interdropout intervals (i.e., the time intervals between consecutive intensity dropouts) are analyzed, disregarding the precise timing of the dropouts and the absolute durations of the interdropout intervals. We show that this methodology is suitable for quantifying subtle characteristics of the LFFs, and in particular the transition to fully developed chaos that takes place when the laser's pump current is increased. Our method shows that the statistical complexity of the laser does not increase continuously with the pump current, but levels off before reaching the coherence collapse regime. This behavior coincides with that of the first- and second-order correlations of the interdropout intervals, suggesting that these correlations, and not the chaotic behavior, are what determine the level of complexity of the laser's dynamics. These results hold for two different dynamical regimes, namely, sustained LFFs and coexistence between LFFs and steady-state emission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lignin-polysaccharide interactions in plant secondary cell walls revealed by solid-state NMR

Lignin is a complex aromatic biopolymer that strengthens and waterproofs plant secondary cell walls, enabling mechanical stability in trees and long-distance water transport in xylem. Lignin removal is a key step in paper production and biomass conversion to biofuels, motivating efforts to re-engineer lignin biosynthesis. However, the physical nature of lignin’s interactions with wall polysaccharides is not well understood. Here we show that lignin self-aggregates to form highly hydrophobic and dynamically unique nanodomains, with extensive surface contacts to xylan. Solid-state NMR spectroscopy of intact maize stems, supported by dynamic nuclear polarization, reveals that lignin has abundant electrostatic interactions with the polar motifs of xylan. Lignin preferentially binds xylans with 3-fold or distorted 2-fold helical screw conformations, indicative of xylans not closely associated with cellulose. These findings advance our knowledge of the molecular-level organization of lignocellulosic biomass, providing the structural foundation for optimization of post-harvest processing for biofuels and biomaterials.

59 BASIC BIOLOGICAL SCIENCES↗

Design Considerations for Practical Li-S Batteries for Electric Aviation

The development of high-energy, high-safety, and high-power batteries beyond electric automotive standards is critical for future electric aviation applications. Non-volatile solid-state electrolytes (SSE) offer many promising advantages over traditional flammable liquid electrolytes. Solid-state electrolytes may be an enabling technology for certain battery chemistries by preventing detrimental interactions with liquid electrolytes, for example prevention of the dissolution of intermediates in lithium-sulfur common in traditional liquid organic solvents. However, significant manufacturing challenges must be overcome before the adoption of such technology. This research was conducted to identify processing techniques for producing solid-state battery components with practical dimensions and weights for enabling high specific energy cells. Traditional research has identified a range of very high theoretical ionic conductivities but are impractical due to their instability or inability to be manufactured. Electrolytes explored in this study were produced as sulfide-polymer composites with densified thicknesses below 40 micron using a tape-casting technique and thermoplastic elastomer binder. The combination of high chemical compatibility and flexibility produced robust films that had moderate impact on the ionic conductivity but was capable of dramatically reducing the parasitic mass. Despite minimal conductivity losses, films were produced 10-15 times thinner than comparable bulk powder electrolytes thus leading to overall lower film resistance. Conductivity is maintained above 0.2mS/cm for composite electrolytes. Through the analysis of materials based on their physical properties, such as density, practical cells can be designed. Based on this, low density sulfide-solid-state electrolytes are a promising candidate for achieving the energy and safety metrics for electric aviation, however, further optimization of cathode microstructure and composite processing will be required to achieve the high power metrics and will be the focus of further studies. Additionally, fabrication challenges arise when utilizing metallic lithium foil, due to its soft nature, as overflow and mechanical short circuit can occur on assembly which remains a challenge to overcome before metallic lithium anodes can be fully realized.

batteries↗

Simultaneous use of solution NMR and X-ray data in REFMAC5 for joint refinement/detection of structural differences

Paramagnetic NMR data (pseudocontact shifts and self-orientation residual dipolar couplings) and diamagnetic residual dipolar couplings can now be used in the program REFMAC5 from CCP4 as structural restraints together with X-ray crystallographic data. These NMR restraints can reveal differences between solid state and solution conformations of molecules or, in their absence, can be used together with X-ray crystallographic data for structural refinement. The program REFMAC5 from CCP4 was modified to allow the simultaneous use of X-ray crystallographic data and paramagnetic NMR data (pseudocontact shifts and self-orientation residual dipolar couplings) and/or diamagnetic residual dipolar couplings. Incorporation of these long-range NMR restraints in REFMAC5 can reveal differences between solid-state and solution conformations of molecules or, in their absence, can be used together with X-ray crystallographic data for structural refinement. Since NMR and X-ray data are complementary, when a single structure is consistent with both sets of data and still maintains reasonably ‘ideal’ geometries, the reliability of the derived atomic model is expected to increase. The program was tested on five different proteins: the catalytic domain of matrix metalloproteinase 1, GB3, ubiquitin, free calmodulin and calmodulin complexed with a peptide. In some cases the joint refinement produced a single model consistent with both sets of observations, while in other cases it indicated, outside the experimental uncertainty, the presence of different protein conformations in solution and in the solid state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photon calibration techniques for high resolution cryogenic detectors

Monoenergetic photons from a pulsed laser diode or LED are commonly used to calibrate the detector response of high-resolution calorimetric detectors. However, when the detector’s resolution is larger than the energy of a single photon, a calibration is normally derived using Poisson statistics. In this paper, we clarify the assumptions implicit in this calibration method, before considering how a more realistic model of a detector’s performance will violate these assumptions, biasing the calibration. Lastly, we judge the individual impact of specific detector parameters on our calibration, and conclude with discussion of both the limits of our calculations and the implications for state-of-the art detectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High‐Field NMR, Reactivity, and DFT Modeling Reveal the γ‐Al 2 O 3 Surface Hydroxyl Network**

Abstract Aluminas are strategic materials used in many major industrial processes, either as catalyst supports or as catalysts in their own right. The transition alumina γ‐Al 2 O 3 is a privileged support, whose reactivity can be tuned by thermal activation. This study provides a qualitative and quantitative assessment of the hydroxyl groups present on the surface of γ‐Al 2 O 3 at three different dehydroxylation temperatures. The principal [AlOH] configurations are identified and described in unprecedented detail at the molecular level. The structures were established by combining information from high‐field 1 H and 27 Al solid‐state NMR, IR spectroscopy and DFT calculations, as well as selective reactivity studies. Finally, the relationship between the hydroxyl structures and the molecular‐level structures of the active sites in catalytic alkane metathesis is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and physical properties of reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22}

Polycrystalline sample of the reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22} was synthesized by solid state reaction at 1523 K in Ar atmosphere for the first time. The Rietveld refinement using the powder X-ray diffraction data confirmed the sample to be main phase of Ba{sub 2}Ti{sub 13}O{sub 22} having the orthorhombic crystal system, space group Bmab and the lattice parameters of a=11.67058(11) A, b=14.12020(13) A and c=10.06121(9) A, and V=1657.995(20) A{sup 3}. The valence state of Ti was evaluated by both the Ti-O bond distance analysis and the Ti K-edge XANES analysis. The magnetic susceptibility was nearly temperature independent in the range of 60-300 K, suggesting the Van Vleck Paramagnetism. The electrical conductivity at 300 K is approximately 320.50 S/cm, and a semiconducting behavior was observed below room temperature. The Seebeck coefficient showed a negative value of -1.25 {mu}V/K at 300 K, indicating n-type behavior. These facts were confirmed by the results of the present theoretical calculations by the FLAPW method. - Graphical abstract: Temperature dependence of the electrical conductivity of Ba{sub 2}Ti{sub 13}O{sub 22}. A plot of ln {sigma} versus T{sup -1} is shown by open circles, and a plot of ln {sigma} versus T{sup -1/4} is shown by open triangles. Highlights: > Polycrystalline samples of Ba{sub 2}Ti{sub 13}O{sub 22} synthesis by solid state reaction. > Theoretical calculation by FLAPW method. > Electrical property measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental observation of stochastic resonance in a solid-state ring laser in the absence of bistability

The appearance of a stochastic resonance is found in a solid-state ring laser in the absence of bistability in it. It is shown that in this laser operating in the self-modulation regime of the first kind, the noise modulation of the pump can cause a significant increase in the laser response to the periodic modulating signal. These effects observed are explained qualitatively. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization Techniques for LiInSe{sub 2} Semiconducting Neutron Detector - Paper 55

As the world supply of helium continues to dwindle, alternatives to neutron detection have been a key focus area of radiation detection research. Solid-state neutron detectors are one possible alternative to the {sup 3}He detectors currently used for neutron detection when large detector areas are not required. Although {sup 6}Li and {sup 10}B are both also commonly used for neutron detection, neither has as high of a thermal cross section as {sup 3}He. The thermal cross sections for {sup 6}Li, {sup 10}B, and {sup 3}He are, respectively, 940 barns, 3840 barns, and 5330 barns. Both boron and helium are used in a gaseous form for neutron detection; however, there is no suitable gaseous form of lithium for neutron detection. Lithium is instead utilized in solid or liquid compounds for neutron detection. In this context, one area of interest is in the development of ternary A{sup I}B{sup III}C{sup IV} semiconductors comprised of isotopically-enriched lithium. Single crystal samples are being prepared through collaboration with the Y12 National Security Complex. This research focuses on the characterization of {sup 6}LiInSe{sub 2} (LISe) crystals, as well as on the development of prototype systems to assess the viability of using LISe crystals as a thermal neutron detector. Data to be obtained will provide previously untested physical parameters to facilitate growth optimization. Eventually, the refined crystals will be developed into solid-state, position-sensitive pixel detectors used for neutron imaging, among a wide array of possible applications including nuclear forensics. For the most part, the research team has been focused on mastering the detector fabrication processes, response tests on the first two batches of crystal samples, and the design of the first iteration detection system (Fig. 2). Response tests using alphas and neutrons have shown sensitivity to both particles. The first iteration detection system developed utilizes a 3-stage filter ladder of resistors and capacitors, similar to an ORTEC 142PC Preamplifier. Ideally, this ladder will reduce the noise associated with the high voltage power supply. The preamplifier is AC coupled to improve its counting rate capability (saturation), and critical components are on insulated posts. The custom circuit is housed in an aluminum box, and initial testing of the circuit has shown expected results. Investigation into further noise reduction is underway and will be the focus of the presented results. Upon completion and successful testing of the final detection system design, further development in spatial resolution and gamma/neutron discrimination will continue. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of noncommuting spin components using spin-orbit interaction

We propose a possible experiment aimed at a joint measurement of two noncommuting spin-1/2 components and analyze its physical meaning. We demonstrate that switching of a strong spin-orbit interaction, e.g., in a solid-state or a cold-atom system, for a short time interval simulates a simultaneous von Neumann measurement of the operators {sigma}{sub x} and {sigma}{sub y}. With the spin dynamics mapped onto the quantum coordinate-space motion, such an experiment determines averages of {sigma}{sub x} and {sigma}{sub y} over the duration of the measurement, however short the latter may be. These time averages, unlike the instantaneous values of {sigma}{sub x} and {sigma}{sub y}, may be evaluated simultaneously to an arbitrary accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

F-wave pairing of cold atoms in optical lattices

The tremendous development of cold atom physics has opened up a whole new opportunity to study novel states of matter which are not easily accessible in solid-state systems. Here we propose to realize the f-wave pairing superfluidity of spinless fermions in p{sub x,y}-orbital bands of two-dimensional honeycomb optical lattices. The nontrivial orbital band structure, rather than strong correlation effects, gives rise to the unconventional pairing with the nodal lines of the f-wave symmetry. With a confining harmonic trap, zero-energy Andreev bound states appear around the circular boundary with a sixfold symmetry. The experimental realization and detection of this novel pairing state are feasible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phonon Coupling between a Nanomechanical Resonator and a Quantum Fluid

Owing to their extraordinary sensitivity to external forces, nanomechanical systems have become an important tool for studying mesoscopic physics and realizing hybrid quantum systems. While nanomechanics has been widely applied in solid-state systems, its use in liquid receives less attention. There it finds unique applications such as biosensing, rheological sensing, and studying both classical and quantum fluid dynamics in unexplored regimes. In this work, we demonstrate efficient coupling of a nano-optomechanical resonator to a bosonic quantum fluid, superfluid 4He, through ultrahigh-frequency phonons (i.e., sound waves) approaching gigahertz frequencies. A high phonon exchange efficiency >92% and minimum excitation rate of 0.25 phonons per oscillations period, or equivalently k B T / hf m Q m = 0.044 << 1, are achieved. Based on our experimental results, we further predict that strong coupling between a nanomechanical resonator and superfluid cavity phonons with cooperativity up to 880 can be achieved. Finally, our study opens new opportunities in controlling and manipulating superfluid at the nanoscale and low-excitation level.

42 ENGINEERING↗