Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Radiation-induced transients on solid and molten Li and K iodides

The study, quantification, and monitoring of iodine in nuclear power generation systems have been paramount due to its environmental and health implications. Thorough speciation and transport studies strengthened the development and deployment of water reactors, which are now required for the new generation of Molten Salt Reactors (MSR), where the fuel and coolant are a complex liquid system of suitable halides. The speciation, radiation-induced chemistry, and transport of iodine (I-127, I-129 and I-131) under extreme conditions of temperature and ionizing radiation are among the challenges for the future implementation of MSR’s. In aqueous systems, the triiodide-iodine-iodide (I3--I2-I-) equilibrium is strongly dependent on the conditions of the medium. In molten iodides and chlorides, the triiodide detection (and its disproportionation) poses challenges due to the extreme conditions of temperature and radiation, but studies have shown a dependence on temperature, absorbed dose and salt composition. Through absorption spectroscopy techniques (diffuse reflectance and high-temperature UV-Vis), as well as resonance (Electron Paramagnetic Resonance) it is possible to identify primary transients induced by ionizing radiation trapped in the solid phase (Solid-state radiolysis), and steady-state main absorption components with a fast-acquisition real-time spectroscopy. The presence of heterogeneous phase (colloids), viscosity changes, and gas evolution are among the observed processes. A specific case of study is speciation in the presence of Ni. A corrosion product with magnetic properties due to unpaired electrons in its electronic structure. Ferromagnetic materials are monitored in solidified salts to identify aggregation and phase separation. Comparative studies of eutectic mixtures of LiI-KI and LiCl-KCl with known addition of dopants will be presented, with a perspective of radiation chemistry and its possible implications in complex systems.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Expanding the chemistry of borates with functional [BO 2 ]- anions

More than 3900 crystalline borates, including borate minerals and synthetic inorganic borates, in addition to a wealth of industrially-important boron-containing glasses, have been discovered and characterized. Of these compounds, 99.9 % contain only the traditional triangular BO 3 and tetrahedral BO 4 units, which polymerize into superstructural motifs. Herein, a mixed metal K 5 Ba 2 (B 10 O 17 ) 2 (BO 2 ) with linear BO 2 structural units was obtained, pushing the boundaries of structural diversity and providing a direct strategy toward the maximum thresholds of birefringence for optical materials design. 11 B solid-state nuclear magnetic resonance (NMR) is a ubiquitous tool in the study of glasses and optical materials; here, density functional theory-based NMR crystallography guided the direct characterization of BO 2 structural units. The full anisotropic shift and quadrupolar tensors of linear BO 2 were extracted from K 5 Ba 2 (B 10 O 17 ) 2 (BO 2 ) containing BO 2 , BO 3 , and BO 4 and serve as guides to the identification of this powerful moiety in future and, potentially, previously-characterized borate minerals, ceramics, and glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rationally designed negative electrode for selective CO 2 -to-CO conversion in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) are solid-state electrochemical devices that employ proton-conducting oxides as electrolytes, which offer a promising approach for electrification of chemical manufacturing, including CO 2 reduction to produce value-added chemicals (e.g., CO). The primary advantage of PCECs is their intermediate operating temperatures (300–600 °C), which thermodynamically and kinetically favor the CO 2 reduction chemistry at the negative electrode. However, the conventional negative electrodes of PCECs, such as BaZr 0.8–x Ce x Y 0.2 O 3-δ -Ni or BaZr 0.8–x Ce x Y 0.1 Yb 0.1 O 3-δ -Ni, cannot reduce CO 2 to either CH 4 or CO with a selectivity of >99 %, leading to the production of a CO and CH 4 mixture. Herein, an oxide-supported in-situ exsolved Ni-Fe alloyed nanoparticle electrocatalyst, Sr 2 Fe 1.4 Mo 0.5 O 6-δ -Ni0.175 (SFM-Ni0.175), is first employed as the negative electrode of PCECs. The PCECs equipped with this new negative electrode selectively favor the CO 2 -to-CO conversion. A selectivity of ~100 % toward CO has been demonstrated over a wide range of operating temperatures (400–600 °C) and applied potentials/current densities. The negative electrode demonstrated in this work fully suppresses the CH 4 production. In situ diffuse reflectance infrared spectroscopy (DRIFTS) was performed to probe the CO 2 reduction mechanisms over both SFM-Ni0.175 and the traditional negative electrode (BCZYYb7111 +Ni), which indicates SFM-Ni0.175 inhibits the formation of formate species, leading to selective production of CO. Finally, this work validates that PCECs equipped with the rationally designed negative electrode can selectively manufacture chemicals.

25 ENERGY STORAGE↗
DOE OSTI2025

The structure of liquid carbon elucidated by in situ X-ray diffraction

Carbon has a central role in biology and organic chemistry, and its solid allotropes provide the basis of much of our modern technology. However, the liquid form of carbon remains nearly uncharted, and the structure of liquid carbon and most of its physical properties are essentially unknown. But liquid carbon is relevant for modelling planetary interiors and the atmospheres of white dwarfs, as an intermediate state for the synthesis of advanced carbon materials, inertial confinement fusion implosions, hypervelocity impact events on carbon materials and our general understanding of structured fluids at extreme conditions. Here we present a precise structure measurement of liquid carbon at pressures of around 1 million atmospheres obtained by in situ X-ray diffraction at an X-ray free-electron laser. Our results show a complex fluid with transient bonding and approximately four nearest neighbours on average, in agreement with quantum molecular dynamics simulations. The obtained data substantiate the understanding of the liquid state of one of the most abundant elements in the universe and can test models of the melting line. The demonstrated experimental abilities open the path to performing similar studies of the structure of liquids composed of light elements at extreme conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Tailored topotactic chemistry unlocks heterostructures of magnetic intercalation compounds

The construction of thin film heterostructures has been a widely successful archetype for fabricating materials with emergent physical properties. This strategy is of particular importance for the design of multilayer magnetic architectures in which direct interfacial spin-spin interactions between magnetic phases in dissimilar layers lead to emergent and controllable magnetic behavior. However, crystallographic incommensurability and atomic-scale interfacial disorder can severely limit the types of materials amenable to this strategy, as well as the performance of these systems. Here, we demonstrate a method for synthesizing heterostructures comprising magnetic intercalation compounds of transition metal dichalcogenides (TMDs), through directed topotactic reaction of the TMD with a metal oxide. The mechanism of the intercalation reaction enables thermally initiated intercalation of the TMD from lithographically patterned oxide films, giving access to a family of multi-component magnetic architectures through the combination of deterministic van der Waals assembly and directed intercalation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Role of Alkalis in Orchestrating Uranyl-Peroxide Reactivity Leading to Direct Air Capture of Carbon Dioxide

Spectator ions have known and emerging roles in aqueous metal-cation chemistry, respectively directing solubility, speciation, and reactivity. Here, in this work, we isolate and structurally characterize the last two metastable members of the alkali uranyl triperoxide series, the Rb + and Cs + salts (Cs-U 1 and Rb-U 1 ). We document their rapid solution polymerization via small-angle X-ray scattering, which is compared to the more stable Li + , Na + and K + analogues. To understand the role of the alkalis, we also quantify alkali-hydroxide promoted peroxide deprotonation and decomposition, which generally exhibits increasing reactivity with increasing alkali size. Cs-U 1 , the most unstable of the uranyl triperoxide monomers, undergoes ambient direct air capture of CO 2 in the solid-state, converting to Cs 4 [U VI O 2 (CO 3 ) 3 ], evidenced by single-crystal X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. We have attempted to benchmark the evolution of Cs-U 1 to uranyl tricarbonate, which involves a transient, unstable hygroscopic solid that contains predominantly pentavalent uranium, quantified by X-ray photoelectron spectroscopy. Powder X-ray diffraction suggests this intermediate state contains a hydrous derivative of CsU V O 3 , where the parent phase has been computationally predicted, but not yet synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Plutonium and Cerium Perrhenate/Pertechnetate Coordination Polymers and Frameworks

Spent nuclear fuel (SNF) contains transuranic and lanthanide species, which are sometimes recovered and repurposed. One particularly problematic fission product, 99 TcO 4 – , hampers this recovery via coextraction with high valence metals, perhaps by complexation during aqueous reprocessing of SNF. There is limited molecular-level knowledge concerning the coordination chemistry between TcO 4 – or its well-known surrogate ReO 4 – and transuranic/lanthanide species. In the current study, we investigated the coordination of ReO 4 – /TcO 4 – with plutonium and cerium cations by structural and chemical characterization of a series of isolated extended solids. In this study, Ce represents both trivalent lanthanides and is considered a surrogate for Pu, respectively, in its common trivalent and tetravalent oxidation states. The structural elucidation of the seven isolated crystalline solids revealed that ReO 4 – /TcO 4 – directly connects to Pu IV , Pu VI O 2 2 + , Ce III , and Ce IV in the terminal and bridging coordination modes, leading to 1-, 2-, and 3-dimensional frameworks. For example, ReO 4 – coordination to Pu(IV) formed a 1D chain or 2D framework, isostructural with previously isolated Th(IV) compounds. However, Pu VI O 2 2 + alternating with ReO 4 – led to a unique 1D chain, different from the prior-reported U(VI)/Np(VI)-ReO 4 – /TcO 4 – structures. Coordination of ReO 4 – /TcO 4 – with Ce(III) promotes the assembly of 3D frameworks. Finally, attempted synthesis of a Ce(IV)-ReO 4 – compound resulted in a 2D framework with a mixed-valence Ce III/IV . The highly acidic reaction conditions supported the reduction of both Ce IV and Tc VII , challenging isolation of compounds featuring these species. Only one TcO 4 -containing structure was obtained in this study (Ce III –TcO 4 3D framework), vs the six total Ce/Pu-ReO 4 compounds. Furthermore, our three Pu-ReO 4 crystal structures are the first reported and translated to atomic-level information about Pu-TcO 4 coordination in nuclear fuel reprocessing scenarios, in addition to broadening our knowledge of bonding trends in the early, high-valence actinides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

A contorted nanographene shelter

Nanographenes have kindled considerable interest in the fields of materials science and supramolecular chemistry as a result of their unique self-assembling and optoelectronic properties. Encapsulating the contorted nanographenes inside artificial receptors, however, remains challenging. Herein, we report the design and synthesis of a trigonal prismatic hexacationic cage, which has a large cavity and adopts a relatively flexible conformation. It serves as a receptor, not only for planar coronene, but also for contorted nanographene derivatives with diameters of approximately 15 Å and thicknesses of 7 Å. A comprehensive investigation of the host-guest interactions in the solid, solution and gaseous states by experimentation and theoretical calculations reveals collectively an induced-fit binding mechanism with high binding affinities between the cage and the nanographenes. Notably, the photostability of the nanographenes is improved significantly by the ultrafast deactivation of their excited states within the cage. Encapsulating the contorted nanographenes inside the cage provides a noncovalent strategy for regulating their photoreactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Porous and Water Stable 2D Hybrid Metal Halide with Broad Light Emission and Selective H 2 O Vapor Sorption

Here, in this work we report a strategy for generating porosity in hybrid metal halide materials using molecular cages that serve as both structure-directing agents and counter-cations. Reaction of the [2.2.2] cryptand (DHS) linker with Pb II in acidic media gave rise to the first porous and water-stable 2D metal halide semiconductor (DHS) 2 Pb 5 Br 14 . The corresponding material is stable in water for a year, while gas and vapor-sorption studies revealed that it can selectively and reversibly adsorb H 2 O and D 2 O at room temperature (RT). Solid-state NMR measurements and DFT calculations verified the incorporation of H 2 O and D 2 O in the organic linker cavities and shed light on their molecular configuration. In addition to porosity, the material exhibits broad light emission centered at 617 nm with a full width at half-maximum (FWHM) of 284 nm (0.96 eV). The recorded water stability is unparalleled for hybrid metal halide and perovskite materials, while the generation of porosity opens new pathways towards unexplored applications (e.g. solid-state batteries) for this class of hybrid semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Purification of legacy Ra-226 from ingrown Pb-210 using cation exchange chromatography

With the growing interest in using radium-226 (Ra-226) as a source material to produce essential radionuclides for targeted alpha therapies, the global demand for Ra-226 has surged, rendering its acquisition difficult. The shortage necessitates the exploration of alternative pathways to obtain this isotope beyond traditional commercial vendors. Legacy radium sources remain widespread due to Ra-226’s historical use but require the removal of ingrown daughter products to obtain a pure Ra-226 product. In conclusion, a straightforward and effective purification method for legacy Ra-226 ampoules has been developed using cation exchange chromatography, enabling the reliable conversion of legacy materials into high-purity Ra-226 solutions.

and nuclear chemistry↗
DOE OSTI2022

Crystal engineering of heterocyclic arylene(ethynylene) oligomers through programmed aromatic stacking

Conjugated oligomers and polymers consisting of aromatic heterocycles are examples of next-generation organic electronic materials. However, control and optimization of the self-assembly of these materials in the solid-state, which is a crucial parameter for high efficiency performance, remains an unsolved challenge in materials development. In this work, we provide valuable insight into aromatic stacking interactions between fluorinated arene rings (ArF) and heterocycles with different electronic character (Het), and elaborate on the prospect of using these interactions to control the solid-state configurations of three-ring phenyleneethynylene oligomers (PEs). Oligomers possessing heterocycles typically thought of as electron-rich (ER) show blue-shifted optical spectra in the solid-state, while those incorporating heterocycles typically thought of us electron deficient (ED) show red-shifted solid-state optical spectra. Crystal structures show ArF-Het stacking interactions between the fluorinated side-chains and ER units, which twist the backbone out of planarity and prevent chromophore aggregation. Further, the interactions are absent in ED oligomers, highlighting cofacial incompatibility between ArF rings and ED units. A combination of TD-DFT computations and novel heterocycle descriptors reinforce our assignment of the oligomers as ED or ER, while exhaustive conformer analysis shows ArF-Het stacking interactions are a significant contributor to compound stability. Overall, this work describes the importance of heterocycle electronics in conformational control in the solid state, understanding of which can be a valuable asset in the development of novel optoelectronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Adsorption and Chromatographic Behavior of Dispersed Sodium Bismuthate Systems for the Separation of Americium from Curium

The selective partitioning of americium (Am) and curium (Cm) is integral for nuclear science areas such as the nuclear fuel cycle, stockpile stewardship, and isotope production but remains a long-standing radioanalytical challenge due to nearly identical chemical properties. Differences in redox chemistry can be exploited since Am can be oxidized to the hexavalent oxidation state. Sodium bismuthate (NaBiO 3 ) exhibits favorable oxidation and ion exchange characteristics conducive to a rapid and efficient Am/Cm chromatographic separation. Contact of nitric acid with NaBiO 3 was shown to significantly decrease the nitric acid concentration and solution volume. The adsorption, kinetic, and chromatographic behavior of Am and Cm in systems that disperse NaBiO3 in filter aids was evaluated. Further, dispersion of NaBiO 3 increased separation factors to over 100, with rapid kinetics achieved within 1 min of contact and sustained for at least 2 h. The adsorption capacity was more than doubled from 0.066 mequiv g –1 for solid NaBiO 3 alone to 0.149(6) and 0.156(9) meq g –1 when dispersed in Celite 545 and silica gel, respectively. Complete separation was achieved in all systems with ~100% recovery in the respective eluted fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Densification of the entropy stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

The first entropy-stabilized oxide, (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O, was reported in 2015. Initial studies synthesized this material using solid state processing and were limited to densities < 80%. Here, we report a straightforward solid state route to sinter samples to densities up to 98% of the theoretical by identifying the role of oxygen and promoting the resulting mechanisms in densification. Previous works have studied effects of cation stoichiometry on the entropy-driven reaction to form a single phase, but few have explored the associated effects of anion stoichiometry and/or redox chemistry on both phase stability and densification. We demonstrate here that tuning heating rate and pO 2 during heating of initially-homogeneous calcined powders can enhance densifying diffusion processes and enable reliable sintering of dense (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O samples.

MATERIALS SCIENCE↗
DOE OSTI2023

The Intermetallic Reactivity Database: Compiling Chemical Pressure and Electronic Metrics toward Materials Design and Discovery

Here, the advent of high-throughput Density Functional Theory (DFT) calculations has supported the creation of large databases containing the quantitative output necessary for constructing theoretical phase diagrams and predicting physical properties. In this Article, we present a complementary resource, the Intermetallic Reactivity Database (IRD), focused on the chemical bonding features of solid-state structures and indicators of potential structural transformations. Each IRD entry augments common features, such as band structures and density of states (DOS) distributions, with chemically motivated information including DFT-Chemical Pressure (CP) schemes and visualizable representations of the atomic charges. Together, these data types enable the rationalization and prediction of potential structural phenomena encountered in intermetallic chemistry, as we illustrate with four examples: the origins of the Y 2 Ni 2 Mg structure in terms of CP features of its parent structures, the anticipation of intergrowth phases from the net atomic CPs collected in Al-containing binary phases, the correlation between trends in the CP schemes of CaCu 5 -type phases and experimentally observed structural variations, and finally, the development of theoretical methodology with the testing of a streamlined method generating DFT-CP schemes. Altogether, these examples highlight how the IRD supports the creation of models of structural chemistry that extend beyond the bounds of its entries.

36 MATERIALS SCIENCE↗