Consideration of simple model atoms for argon discharge calculations
Simple argon model atoms used for calculating electron number densities for argon plasma discharges
Dugan, J. V., Jr.↗
SEARCH · Engineering Papers
Results for “simple”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Dispersion relations for guided waves in a simple moving medium
Propagation constant relation to frequency for waveguide filled with simple moving medium, presenting dispersion curves set
Yee, H. Y.↗
Simple turbine balancing test apparatus
Simple, inexpensive apparatus has been devised for testing dynamic balance of turbine rotors. No elaborate instrumentation is required and rotor is spun by directing jet of air against blades. Basic principle involved is that of the vibration of a mass on a spring. Apparatus can be used where conventional, expensive, balance facilities are not readily available.
Vavra, M. H.↗
A simple dead-reckoning navigational system
Simple navigation system is designed for vehicles operating in remote locations where it is not feasible to transport extensive equipment. System consists of four main components: directional gyrocompass to establish inertial direction; odometer to measure distance; signal processor to combine measured distance and direction; and sun compass to determine initial direction.
Walls, B. F.↗
A simple spectrophotometric method for determination of zirconium or hafnium in selected molybdenum-base alloys
A simple analytical procedure is described for accurately and precisely determining the zirconium or hafnium content of molybdenum-base alloys. The procedure is based on the reaction of the reagent Arsenazo III with zirconium or hafnium in strong hydrochloric acid solution. The colored complexes of zirconium or hafnium are formed in the presence of molybdenum. Titanium or rhenium in the alloy have no adverse effect on the zirconium or hafnium complex at the following levels in the selected aliquot: Mo, 10 mg; Re, 10 mg; Ti, 1 mg. The spectrophotometric measurement of the zirconium or hafnium complex is accomplished without prior separation with a relative standard deviation of 1.3 to 2.7 percent.
Dupraw, W. A.↗
Comparison of hinge moments for a simple delta wing and a delta-wing orbiter concept at Mach 6
Comparisons of hinge moments for simple delta wing and delta wing orbiter concept at Mach 6
Ashby, G. C., Jr.↗
Examination of the collision force method for analyzing the responses of simple containment/deflection structures to impact by one engine rotor blade fragment
An approximate collision analysis, termed the collision-force method, was developed for studying impact-interaction of an engine rotor blade fragment with an initially circular containment ring. This collision analysis utilizes basic mass, material property, geometry, and pre-impact velocity information for the fragment, together with any one of three postulated patterns of blade deformation behavior: (1) the elastic straight blade model, (2) the elastic-plastic straight shortening blade model, and (3) the elastic-plastic curling blade model. The collision-induced forces are used to predict the resulting motions of both the blade fragment and the containment ring. Containment ring transient responses are predicted by a finite element computer code which accommodates the large deformation, elastic-plastic planar deformation behavior of simple structures such as beams and/or rings. The effects of varying the values of certain parameters in each blade-behavior model were studied. Comparisons of predictions with experimental data indicate that of the three postulated blade-behavior models, the elastic-plastic curling blade model appears to be the most plausible and satisfactory for predicting the impact-induced motions of a ductile engine rotor blade and a containment ring against which the blade impacts.
Zirin, R. M.↗
A simple branch synchronizer for convolutional decoders.
A simple branch synchronizer for rate 1/3, constraint length five, nonsystematic convolutional code is described. The scheme derives the sync information from the received channel bits, thus avoiding the extra formatting of the sync data at the transmitter and receiver, and increasing the data rate. The synchronizer detects the proper sync bits for both the in-phase and phase ambiguous cases. The design is adaptable to nonsystematic codes of different constraint lengths.
Taqvi, S. Z. H.↗
A simple executive for a fault-tolerant, real-time multiprocessor.
Description of a simple executive for operation with a fault-tolerant multiprocessor that is oriented toward application in an environment where the primary function is to provide real-time control. The primary executive function is to accept requests for jobs placed by other jobs or from peripheral equipment and then schedule their initiation in accordance with the request parameters. The executive is also brought into action when a processor fails, so that appropriate disposition may be made of the job that was running on the failed processor. Many architectural features intended to support this executive concept are included.
Filene, R. J.↗
Optimization of simple structures with higher mode frequency constraints.
Results of a study of least weight optimization of simple structures with a single natural frequency constraint. Variational techniques were used to derive the necessary equations, and numerical methods were used, where required, to find solutions to the resulting nonlinear, two-point boundary value problems. The numerical results suggest a similarity between the fixed fundamental frequency solution and solutions in which a single frequency other than fundamental is held fixed. Such a similarity is shown to occur under special circumstances, and the knowledge of the fundamental solution in these cases makes it possible to calculate the solution to problems with constraints on frequencies other than the fundamental.
Weisshaar, T. A.↗
Stored energy function of rubberlike materials derived from simple tensile data.
An explicit formulation is developed to obtain the stored energy function, based on the Valanis-Landel separable symmetric stored energy function. This formulation is applicable to any multiaxial stress state, from simple tensile data alone, for those cases in which the stored energy function is a separable function of the stretch ratios. By direct comparison, it is also shown that styrene butadiene rubber, at least over a specific range, follows this postulated separable form.
Peng, T. J.↗
Simple technique for sequential Q-switching of molecular lasers.
A simple technique for sequentially Q-switching molecular lasers is discussed in which an optical scanner is used as an optical folding element in a laser cavity consisting of a stationary diffraction grating and partially reflecting mirror. Sequential Q-switching of a conventional CO2 laser is demonstrated in which over sixty-two transitions between 9.2 and 10.8 microns are observed. Rapid repetition rates (200 Hz) and narrow laser pulses (less than 5 microsec) allow conventional signal processing techniques to be used with this multiwavelength laser source which is a versatile tool for laser propagation studies, absorption spectroscopy, and gain measurements. Results of a preliminary experiment demonstrating the utility of measuring selective absorption of CO2 laser wavelengths by C2H4 are shown.
Lucht, R. A.↗
Scanning-angle distribution of planetary albedo gramma rays: A simple model
A simple model for calculating the planetary albedo scanning angle distribution above 100 MeV is discussed and the results are compared with present observations.
Stecker, F. W.↗
A general relaxation theory of simple liquids
A relatively simple relaxation theory to account for the behavior of liquids under dynamic conditions was proposed. The general dynamical equations are similar in form to the phenomenological relaxation equations used in theories of viscoelasticity, however, they differ in that all the coefficients of the present equations are expressed in terms of thermodynamic and molecular quantities. The theory is based on the concept that flow in a liquid distorts both the radial and the velocity distribution functions, and that relaxation equations describing the return of these functions to their isotropic distributions, characterizing a stationary liquid, can be written. The theory was applied to the problems of steady and oscillatory shear flows and to the propagation of longitudinal waves. In all cases classical results are predicted for strain rates, and an expression for the viscosity of a liquid, simular to the Macedo-Litovitz equation, is obtained.
Merilo, M.↗
A design study for a simple-to-fly, constant attitude light aircraft
The activities during a four-year study by doctoral students to evolve in detail a design for a simple-to-fly, constant attitude light airplane are described. The study indicated that such aircraft could materially reduce the hazards to light airplane occupants which arise from the high pilot work load and poor visibility that occur during landing. Preliminary cost studies indicate that in volume production this system would increase the cost of the aircraft in roughly the same fashion that automatic transmission, power steering, power brakes, and cruise control increase the cost of a compact car.
Smetana, F. O.↗
The electromagnetic radiation from simple sources in the presence of a homogeneous dielectric sphere
In this research, the effect of a homogeneous dielectric sphere on the electromagnetic radiation from simple sources is treated as a boundary value problem, and the solution is obtained by the technique of dyadic Green's functions. Exact representations of the electric fields in the various regions due to a source located inside, outside, or on the surface of a dielectric sphere are formulated. Particular attention is given to the effect of sphere size, source location, dielectric constant, and dielectric loss on the radiation patterns and directivity of small spheres (less than 5 wavelengths in diameter) using the Huygens' source excitation. The computed results are found to closely agree with those measured for waveguide-excited plexiglas spheres. Radiation patterns for an extended Huygens' source and for curved electric dipoles located on the sphere's surface are also presented. The resonance phenomenon associated with the dielectric sphere is studied in terms of the modal representation of the radiated fields. It is found that when the sphere is excited at certain frequencies, much of the energy is radiated into the sidelobes. The addition of a moderate amount of dielectric loss, however, quickly attenuates this resonance effect. A computer program which may be used to calculate the directivity and radiation pattern of a Huygens' source located inside or on the surface of a lossy dielectric sphere is listed.
Mason, V. B.↗
Structural expansions for the ground state energy of a simple metal
A structural expansion for the static ground state energy of a simple metal is derived. An approach based on single particle band structure which treats the electron gas as a non-linear dielectric is presented, along with a more general many particle analysis using finite temperature perturbation theory. The two methods are compared, and it is shown in detail how band-structure effects, Fermi surface distortions, and chemical potential shifts affect the total energy. These are of special interest in corrections to the total energy beyond third order in the electron ion interaction, and hence to systems where differences in energies for various crystal structures are exceptionally small. Preliminary calculations using these methods for the zero temperature thermodynamic functions of atomic hydrogen are reported.
Hammerberg, J.↗
A simple performance calculation method for LH2/LOX engines with different power cycles
A simple method for the calculation of the specific impulse of an engine with a gas generator cycle is presented. The solution is obtained by a power balance between turbine and pump. Approximate equations for the performance of the combustion products of LH2/LOX are derived. Performance results are compared with solutions of different engine types.
Schmucker, R. H.↗