Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “security operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Report series: finding of effect and mitigation documentation for the mercury solar photovoltaic array and battery energy storage system, area 23, nevada national security site, nye county, nevada

The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) proposes to install solar photovoltaic (PV) power generation arrays and an associated battery energy storage system (BESS) for the town of Mercury at the Nevada National Security Site (NNSS) in Nye County, Nevada (Figure 1). The purposes of the development of this facility are to support long-term efforts to modernize Mercury and to provide energy-resilient infrastructure and address climate adaptation needs. Because it is within the boundary of the Mercury Historic District (MHD), it is subject to the terms of the Programmatic Agreement Between the National Nuclear Security Administration Nevada Field Office and the Nevada State Historic Preservation Officer Regarding Modernization and Operational Maintenance of the Nevada National Security Site, at Mercury in Nye County, Nevada (hereafter referred to as the Mercury PA). An identification and evaluation report prepared for this undertaking determined that a contributing element to the MHD, the Mercury airstrip (26NY15777), is within the APE (Haynes 2024). The Mercury airstrip was developed following the closure of Camp Desert Rock in 1957 and used until late 1963 or 1964 when the Camp Desert Rock Airport was renovated, and the Mercury Bypass road constructed. The town of Mercury and the immediate surrounding area have been determined eligible for listing in the National Register of Historic Places (NRHP) as the MHD (SHPO Resource No. D230) under Criteria A and C for its importance in supporting nuclear testing and scientific research from 1951 through 1992 (Reed 2019). Originally recorded in 2016, 26NY15777 was determined individually not eligible for listing in the NRHP because it lacked sufficient integrity to convey its significance (Palmer 2016). It was subsequently determined in 2018 to be a contributing element of the MHD in an architectural survey of the district (Palmer 2018) and identified in Appendix C of the Mercury PA as a Category I contributing element. However, as per Stipulation IV.B.2, because the airstrip had already been formally evaluated and determined not to be individually eligible for the NRHP in consultation with the SHPO, this categorization was an error. NNSA/NFO reported this to the SHPO in Haynes 2024 and the SHPO concurred on June 11, 2024 (Reed). Accordingly, the airstrip is a Category II Property for the purposes of complying with the Mercury PA. The Mercury airstrip is a historic property for the purposes of compliance with Section 106 of the National Historic Preservation Act (NHPA) and subject to the stipulations of the Mercury PA.

25 ENERGY STORAGE↗

Regulatory Framework for Permanent Shut-down and Decommissioning of Nuclear Power Plant in Korea - 18101

Kori Unit 1, the first commercial NPP in Korea which was commissioned in 1978, was put on permanent shutdown for decommissioning on June 2017, after 40 years of operation. For permanent shutdown of the Kori Unit 1, an operation change permit was submitted in 2016 prior to the expiration since the NSA (Nuclear Safety Act) recognizes permanent shutdown as one of the operation stage. In preparation for the decommissioning of Kori Unit 1, the NSA related to decommissioning was revised and promulgated in 2015. The lower statues including Enforcement Decree and Regulation of the NSA, etc. were promptly revised to reflect decommissioning related requirements and procedures accordingly. For new NPPs, preliminary decommissioning plan is submitted and is being reviewed in the course of license review. Operating NPPs are also planning to submit the decommissioning plan by 2018 and receive approvals from Nuclear Safety and Security Commission. In case that an operator intends to decommission a nuclear installation, the operator shall apply for decommissioning and receive an approval from the NSSC. As discussed, framework for permanent shutdown and decommissioning of nuclear facilities have been well formatted by successful revision of NSA in Korea. Further detailed technical standards and regulatory guides on decommissioning will be developed to facilitate the relevant activities and ensure the nuclear safety. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stormwater Pollution Prevention Plan for the TA-60-02 Salvage Warehouse, Los Alamos National Laboratory, Revision 3, January 2018

This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. The applicable stormwater discharge permit is EPA General Permit Registration Number NMR053915 (Los Alamos National Security (LANS) (U.S. EPA, June 2015). Contents of the June 4, 2015 Multi-sector General Permit can be viewed at: https://www.epa.gov/sites/production/files/2015- 10/documents/msgp2015_finalpermit.pdf This SWPPP applies to discharges of stormwater from the operational areas of the TA-60-02 Salvage and Warehouse facility at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60-02 Salvage/ Warehouse and associated areas. The current permit expires at midnight on June 4, 2020. A copy of the facility NOI and LANS Delegation of Authority Letter are located in Appendix C of this SWPPP.

54 ENVIRONMENTAL SCIENCES↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

97 MATHEMATICS AND COMPUTING↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

97 MATHEMATICS AND COMPUTING↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

Hart, Mark Miles↗

URANIUM ACCUMULATIONS IN CASTING OPERATIONS

In December 2017, unexpected accumulations of uranium were discovered in several locations throughout the casting process area at the Y-12 National Security Complex that subsequently placed casting operations on hold. The Y-12 uranium casting process takes place in enclosures and hoods, many of which are open to a large floor surface area that has limited visibility and access. At the time of discovery, there were no Nuclear Criticality Safety (NCS) analyses or limits for material accumulations in the casting processing areas. Due to changes in the operation of the casting process and invalid assumptions in the criticality safety evaluation, significant material accumulations were occurring inside the enclosures. The material accumulations were identified as a result of an extent of condition review from another process, and an occurrence report was filed. The NCS organization worked with Production and Operations personnel to identify additional areas of uranium accumulation in the casting area, which resulted in several iterations of cleaning and material collection. Following material recovery, a causal analysis was performed that identified several contributing factors that allowed the accumulations to go unnoticed. In order to resume operations, the criticality safety evaluation was revised to analyze and control uranium accumulations in the casting area. Additionally, improvements in nuclear material control and accountability (NMC&A) controls were required. Casting operations have since resumed with frequently required material collections, which have limited the amount of uranium material accumulation.

42 ENGINEERING↗

URANIUM ACCUMULATIONS IN CASTING OPERATIONS

In December 2017, unexpected accumulations of uranium were discovered in several locations throughout the casting process area at the Y-12 National Security Complex that subsequently placed casting operations on hold. The Y-12 uranium casting process takes place in enclosures and hoods, many of which are open to a large floor surface area that has limited visibility and access. At the time of discovery, there were no Nuclear Criticality Safety (NCS) analyses or limits for material accumulations in the casting processing areas. Due to changes in the operation of the casting process and invalid assumptions in the criticality safety evaluation, significant material accumulations were occurring inside the enclosures. The material accumulations were identified as a result of an extent of condition review from another process, and an occurrence report was filed. The NCS organization worked with Production and Operations personnel to identify additional areas of uranium accumulation in the casting area, which resulted in several iterations of cleaning and material collection. Following material recovery, a causal analysis was performed that identified several contributing factors that allowed the accumulations to go unnoticed. In order to resume operations, the criticality safety evaluation was revised to analyze and control uranium accumulations in the casting area. Additionally, improvements in nuclear material control and accountability (NMC&A) controls were required. Casting operations have since resumed with frequently required material collections, which have limited the amount of uranium material accumulation.

61 RADIATION PROTECTION AND DOSIMETRY↗

HP in Cybersecurity: CyOTE

The U.S. Department of Energy’s (DOE) Office of Cybersecurity, Energy Security, and Emergency Response (CESER), through the Cybersecurity for the Operational Technology Environment (CyOTE) Program, worked with energy sector asset owners and operators (AOOs), partners, and Idaho National Laboratory (INL) to develop capabilities for AOOs to independently detect adversarial tactics, techniques, and procedures (TTPs) within their operational technology (OT) environments. Unlike the approach taken with commercial security solutions, CyOTE seeks to tie anomalies in cyber operations to a cyber-attack. By stringing together multiple techniques in the OT environment, AOOs can identify attack campaigns with ever decreasing impacts. The CyOTE methodology applies fundamental concepts of perception and comprehension to a universe of knowns and unknowns increasingly disaggregated into observables, anomalies, and triggering events. MITRE’s ATT&CK® Framework for Industrial Control Systems (ICS) is used as a common lexicon to identify a set of triggering events related to three Use Cases – Alarm Logs, Human-Machine Interface (HMI), and Remote Logins – which together account for 87 percent of the techniques commonly used by adversaries. The CyOTE methodology is also appropriate for OT-related anomalies perceived outside the three Use Cases, such as through the energy system itself.

99 GENERAL AND MISCELLANEOUS↗

Primary Disaster Field Office (DFO), Lufkin, Texas

On February 1, 2003, the Space Shuttle Columbia broke apart during atmospheric re-entry on mission STS-107; the complexity of such an event cannot be underestimated. The Lufkin Disaster Field Office (DFO) served as the primary DFO for all operations, including staging assets and deploying field teams for search, recovery and security. There were many organizations that had operational experience with disaster recovery. Offers to help came from many groups including the White House Liaison Office, the Department of Defense (DOD), branches of local, state and federal government, the Federal Bureau of Investigation (FBI), the Federal Emergency Management Agency (FEMA), the Environmental Protection Agency (EPA), state police, fire departments, the Texas Forestry Service, the Texas Army National Guard, medical groups, various rescue forces, contractor companies, the Salvation Army, local businesses, and citizens of our country and especially East Texas. The challenge was to know how much help to accept and how to efficiently incorporate their valuable assistance into a comprehensive and cohesive operational plan. There were more than 2,000 people involved with search and recovery.

Wetherbee, James D.↗

Celestial Navigation in Cislunar Space with autoNGC

Celestial navigation (CelNav) is a source of navigation observables where images of known solar system bodies are used to locate a spacecraft, beneficial within the solar system for both cislunar and deep space missions. CelNav provides a variety of design benefits to support and enable current and new autonomous space operations- using only a camera and a processor to produce in-situ measurements for navigation. This technology reduces subscription to ground-based tracking during all phases of a mission, freeing up resources for other operational needs. This also supports secure navigation since it eliminates the need for ground contact. CelNav enables missions where the light time delay between Earth and the spacecraft is too long (or the Earth to spacecraft line of sight is obscured) to support critical operations. It also enables smaller mission classes, where Deep Space Network (DSN)time is cost prohibitive, to reduce its cost by focusing primarily on data downlink. Finally, it enables the NASA Artemis program and other cislunar human space flight by providing redundant navigation to traditional radiometric tracking. In this presentation, we discuss the implementation of a CelNav app in autonomous Navigation, Guidance, and Control (autoNGC), a comprehensive flight software suite for onboard autonomy that is built on the core Flight System (cFS). The presentation also summarizes the results of flight software-in-the-loop (SIL) and processor-in-the-loop (PIL) demonstrations. Both are high-fidelity simulations with the use of a camera emulator hosted on a GPU server that simulates images that would be captured by the camera. The CelNav app leverages the use of cGIANT (cFS Goddard Image Analysis and Navigation Tool).Previously developed for the autoNGC software suite, cGIANT is an onboard autonomous image processing and optical navigation (OpNav) tool that performs limb-based OpNav and Terrain Relative Navigation. The added CelNav capability of cGIANT generates bearing measurements to multiple known celestial bodies (planets, moons, asteroids, comets, etc.) in monocular (2D) images. These observables are then fed to the Goddard Enhanced Onboard Navigation System (GEONS)navigation filter app, enabling us to navigate the spacecraft autonomously. In early 2025, the autoNGC CelNav capability is planned to be flight tested as part of the onboard autonomy experiment on the Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment(CAPSTONE) spacecraft that is currently in a Lunar Near Rectilinear Halo Orbit(NRHO).

celestial navigation↗

UAS Radiological Sensing – Nevada National Security Site

In the aftermath of a hazardous incident, there is limited information and almost no means to access the area safely. There is a need to quickly obtain accurate information regarding the extent and severity of the incident. One way to quickly assess the environment is by flying over the dangerous area with unmanned aerial systems followed by remotely operated ground vehicles. The Nevada National Security Site (NNSS) provides a repeatable environment to simulate operations for dangerous and dirty situations. An unmanned aircraft system (UAS) has the advantages of fast deployment and low-altitude flying, which enhances sensitivity and wide-area coverage, eliminates radiation exposure health safety restrictions, and gives the ability to access highly hazardous or radioactive areas, etc. A UAS can be configured with the nuclear detecting sensor optimized to measure the radiation associated with the event. A multi-UAS has advantages over a single UAS, especially in time-critical tasks such as detecting nuclear radiation. UAS may be helpful in plume definition, ground deposition, moving source, and static or moving spills. Assessing any situation that is dangerous, in hazardous areas (dirty), needs to be repeated (dull), or unreachable (deep), is a candidate for an unmanned system. In addition, the NNSS is in a unique location to conduct isolated, secured, and controlled high-risk experiments. We attract international customers along with domestic agencies due to the unique environmental conditions that have evolved over the past 65 years. The NNSS employs a talented group of operational scientists and engineers with a long history of applied research in radiation/nuclear science. We often collaborate with other national laboratories and universities in addressing unique problems. The NNSS has conducted UAS missions for over 25 years and has established a UAS program to address the difficult challenges in using unmanned systems for national security missions.

42 ENGINEERING↗

Towards 5G-Enabled Operational Technology for Process Monitoring and Network Slicing

Cyber-Physical Systems (CPS) are deployed to monitor physical processes in critical cyber-enabled services like power generation. However, CPS ecosystems are typically designed without robust security. While it is important to ensure optimal performance of the Operational Technology (OT) environments, security cannot be overlooked. To modernize traditional OT services, 5G technology is being integrated. 5G technology offers low latency and high availability, making it a suitable infrastructure for managing and monitoring physical processes. How-ever, integrating 5G mechanisms into large-scale OT networks introduces new implementation and performance challenges. Therefore, this paper presents a 5G-enabled CPS architecture (5G-CPS) that describes the necessary components, services, and communication protocols and conducts feasibility study to integrate 5G technology in industrial control system networks to understand the performance merits. The 5G-CPS architecture aims to minimize implementation and operational challenges associated with integrating 5G technology into constrained OT.

Aguayo, Jared M.↗

Corrective Control to Handle Forecast Uncertainty: A Chance Constrained Optimal Power Flow

Higher shares of electricity generation from renewable energy sources and market liberalization is increasing uncertainty in power systems operation. At the same time, operation is becoming more flexible with improved control systems and new technology such as phase shifting transformers (PSTs) and high voltage direct current connections (HVDC). Previous studies have shown that the use of corrective control in response to outages contributes to a reduction in operating cost, while maintaining N-1 security. In this work, we propose a method to extend the use of corrective control of PSTs and HVDCs to react to uncertainty. We characterize the uncertainty as continuous random variables, and define the corrective control actions through affine control policies. This allows us to efficiently model control reactions to a large number of uncertainty sources. The control policies are then included in a chance constrained optimal power flow formulation, which guarantees that the system constraints are enforced with a desired probability. Lastly, by applying an analytical reformulation of the chance constraints, we obtain a second-order cone problem for which we develop an efficient solution algorithm. In a case study for the IEEE 118 bus system, we show that corrective control for uncertainty leads to a decrease in operational cost, while maintaining system security. Further, we demonstrate the scalability of the method by solving the problem for the IEEE 300 bus and the Polish system test cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Progress to Date on Developing the NUSAM Methodology Document

The same basic steps occur when evaluating the physical protection of nuclear or radiological material in transport against theft or sabotage as are needed for protecting nuclear facilities and nuclear material in use or storage. There are some notable distinctions, however. There are limited layers of protection around material when in transport so that the analysis focuses more on scenario analysis than for fixed sites which may require formal path analysis if the facility has some complexity. In many respects, ground transportation security is more challenging than security at a fixed site. Operation in the public domain is frequently required and the same degree of access limitation is not possible as it is in a protected fixed site. Because of these differences, response force personnel in transit play a more dominant role in the security of a mobile system than they do for a fixed site. In all cases, however, the system time delay that is required to provide the response force the time to react must be provided primarily by transportation vehicle technology elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗