Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “robust design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Countering sensor drift in x-ray micrscopy with fast and robust optimal control

In X-ray microscopy it is imperative that the relative position between the optics stage, that carries the X-ray focusing optics, and the sample stage follow a certain trajectory while either the optics or sample stage is being scanned. Main challenges in achieving this requirement include - open loop drift, environmental disturbance, measurement noise, sensor drift, and control hardware limit. The state-of-the-art in X-ray microscopy at Advanced Photon Source (APS) at Argonne National Laboratory (ANL) features an H ∞ control architecture applied to only the optics stage or both the optics and sample stage, achieving the objectives of large tracking bandwidth over 200 Hz, good positioning resolution on the order of nanometers, rejection of environmental disturbance, attenuation of measurement noise, good Xray diffraction image resolution and increased imaging bandwidth. However, an unaddressed issue in our existing robust control design is that the sensors and the fixtures that hold the sensors drift with time due to changing air temperature in the APS beamline. Since the drift of sensor itself is not measured, it affects the relative position between the focusing optics and sample resulting into imaging artifacts and reduced image resolution. In this article, we demonstrate the rejection of the sensor drift by directly measuring the displacement of the sensor with respect to the global reference frame. Both the measured sensor displacement (i.e. sensor drift) and optics stage displacement are incorporated in the H ∞ control architecture to achieve the above mentioned objectives in addition to minimal relative displacement between the optics stage and the sample stage. This will improve the Xray image resolution and reduce image artifacts.

Robust Control↗

Fine-tuning catalytic selectivity by modulating catalyst-environment interactions: CO 2 hydrogenation over Pd-based catalysts

Capturing catalytic behaviors under operational conditions is pivotal to gaining a mechanistic understanding and promoting the design of robust catalysts. The challenge lies in the difficulty of monitoring real-time surface dynamics driven by catalyst-environment interactions. Here, in this work, we introduce a framework based on density functional calculations and kinetic modeling. This framework significantly improves the accuracy of theoretical models’ descriptions of experimental observations by quantifying environmental impacts on surface phases and active sites. CO 2 hydrogenation over Pd-based catalysts is taken as a showcase. The observed selectivity variations of Pd and Pd-M bimetallic catalysts strongly correlate with hydrogen coverage maintained under typical CO 2 hydrogenation conditions. By reducing the amount of surface hydrogen, the selectivity tuned effectively from formic acid toward CO and methanol. This study not only deepens the comprehension of dynamics of active sites under active chemical conditions but also introduces an alternative opportunity for catalytic tuning by modulating catalyst-environment interactions.

03 NATURAL GAS↗

Robust control of systems with real parameter uncertainty and unmodelled dynamics

Two significant contributions have been made during this research period in the research 'Robust Control of Systems with Real Parameter Uncertainty and Unmodelled Dynamics' under NASA Research Grant NAG-1-1102. They are: (1) a fast algorithm for computing the optimal H(sub infinity) norm for the four-block, the two block, or the one-block optimal H(sub infinity) optimization problem; and (2) a construction of an optimal H infinity controller without numerical difficulty. In using GD (Glover and Doyle) or DGKF (Doyle, Glover, Khargonekar, and Francis) approach to solve the standard H infinity norm which required bisection search. In this research period, we developed a very fast iterative algorithm for this computation. Our algorithm was developed based on hyperbolic interpolations which is much faster than any existing algorithm. The lower bound of the parameter, gamma, in the H infinity Riccati equation for solution existence is shown to be the square root of the supremum over all frequencies of the maximum eigenvalue of a given transfer matrix which can be computed easily. The lower band of gamma such that the H infinity Riccati equation has positive semidefinite solution can be also obtained by hyperbolic interpolation search. Another significant result in this research period is the elimination of the numerical difficulties arising in the construction of an optimal H infinity controller by directly applying the Glover and Doyle's state-space formulas. With the fast iterative algorithm for the computation of the optimal H infinity norm and the reliable construction of an optimal H infinity controller, we are ready to apply these tools in the design of robust controllers for the systems with unmodelled uncertainties. These tools will be also very useful when we consider systems with structured uncertainties.

Chang, Bor-Chin↗

Higher-order factorization machine for accurate surrogate modeling in material design

Efficient and robust optimization is important in material science for identifying optimal structural parameters and enhancing material performance. Surrogate-based active learning algorithms have recently gained great attention for their ability to efficiently navigate large, high-dimensional design spaces. Among surrogate models, 2 nd -order factorization machine (FM) models are widely employed as the surrogate model in active learning algorithms due to their balance between simplicity and effectiveness. However, their quadratic nature limits their capacity to capture complex, higher-order interactions among variables, often leading to suboptimal solutions. To overcome this limitation, we propose an active learning scheme integrating a 3 rd -order FM model, capable of modeling three-variable interactions and more intricate relationships in material systems. We comprehensively evaluate the surrogate modeling performance of the 3 rd -order FM case using various objective functions. Furthermore, we examine the optimization reliability and efficiency of the 3 rd -order FM-based active learning in a real-world material design task (e.g., nanophotonic structures for transparent radiative cooling). Our study shows that the 3 rd -order FM outperforms the 2 nd -order model in both surrogate accuracy and optimization performance, highlighting higher-order models’ promises for material design and optimization problems.

Factorization machine↗

An Ultrastable Aqueous Iodine-Hydrogen Gas Battery

Rechargeable hydrogen gas batteries are highly desirable for large-scale energy storage because of their long life cycle, high round trip efficiency, fast reaction kinetics, and hydrogen gas profusion. Coupling advanced cathode chemistries with hydrogen gas anode is an emerging and exciting area of research. Here, a novel high-performance aqueous iodine-hydrogen gas (I 2 -H 2 ) battery using iodine as cathode and hydrogen gas as the electrocatalytic anode in environmentally benign aqueous electrolytes is reported. The working chemistry of the battery involves I 2 /I - solid-liquid reactions occurring over the cathode along with H 2 /H 2 O gas-liquid reactions at the anode, achieving a high rate performance of 100 C and long-lasting stability of over 60 000 cycles. Additionally, the static aqueous I 2 -H 2 battery displays a volumetric capacity of 15.5 Ah L -1 along with good self-healing capability towards cell overcharge. The current battery design exhibits robust electrochemical performance irrespective of acidic, neutral, and alkaline electrolyte systems. This study paves the way towards the industrialization of economically effective, high-power density, and long-term I 2 -H 2 batteries for large-scale energy storage applications.

08 HYDROGEN↗

Stabilization of Miscible Aqueous Phases via Diffusion‐Controlled Multifunctional Nanoparticle‐Ligand Complexation

Liquid‐in‐liquid structuring by harnessing miscible aqueous domains can be achieved by inducing thermodynamically defined phase separation using aqueous solutions of incompatible solutes, where immiscibility is dictated by the concentrations of the solutes. For instance, in aqueous two‐phase systems (ATPSs), the interfacial tension between the two different aqueous solutions is so small that it stabilizes the phase‐separated domains, but not their shape, thus falling short of designing tunable, robust structures. Here, we introduce a diffusion‐controlled strategy that enables liquid‐in‐liquid compartmentalization absent a thermodynamically defined interface or bulk liquid‐liquid phase separation using a barrier formed in situ at the initial contact boundary of an aqueous dispersion of multifunctional nanoparticles and a solution of multifunctional ligands in pure water or a water/alcohol mixture. The nanoparticles and ligands are entropically driven to disperse uniformly but interact at the initial contact boundary more rapidly than bulk mixing, forming a layer that establishes a barrier akin to a semi‐permeable membrane and allows the formation of tubular compartments. A wealth of opportunities is enabled by the proposed technique, where examples in separations, soft electronic devices, and ultralight porous electromagnetic shielding materials are shown.

cryogels↗

A Dual‐Crosslinking Design for Resilient Lithium‐Ion Conductors

Abstract Solid‐state electrolyte materials are attractive options for meeting the safety and performance needs of advanced lithium‐based rechargeable battery technologies because of their improved mechanical and thermal stability compared to liquid electrolytes. However, there is typically a tradeoff between mechanical and electrochemical performance. Here an elastic Li‐ion conductor with dual covalent and dynamic hydrogen bonding crosslinks is described to provide high mechanical resilience without sacrificing the room‐temperature ionic conductivity. A solid‐state lithium‐metal/LiFePO 4 cell with this resilient electrolyte can operate at room temperature with a high cathode capacity of 152 mAh g −1 for 300 cycles and can maintain operation even after being subjected to intense mechanical impact testing. This new dual crosslinking design provides robust mechanical properties while maintaining ionic conductivity similar to state‐of‐the‐art polymer‐based electrolytes. This approach opens a route toward stable, high‐performance operation of solid‐state batteries even under extreme abuse.

Lopez, Jeffrey↗

Radiation Response of Ga 2 O 3 MOSFETs Probed via Focused Particle Beams

Gallium Oxide (Ga 2 O 3 ), particularly in its β-phase, is attracting lots of interest for high-power and high-voltage electronics due to its wide bandgap, high breakdown field, and thermal stability. This study investigates the radiation response of Ga 2 O 3 Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) under Total Ionizing Dose (TID) and Displacement Damage (DD) conditions, which are critical for applications in radiation environments. Utilizing a dual-beam Focused Ion Beam and Scanning Electron Microscope setup, microscale analysis of radiation effects on individual devices is performed. The findings reveal distinct behaviors under TID and DD + TID conditions, with TID leading to threshold voltage shifts due to trapped charges, while DD results in decreased drive current attributed to increased carrier scattering from lattice defects. Notably, it is demonstrated that the TID effect can be mitigated through dynamic threshold voltage adjustments and that the predicted TID from ions calculated by Monte Carlo simulations overestimates actual TID due to unaccounted charge yield effects. In conclusion, this research enhances the understanding of Ga2O3 MOSFETs' performance in harsh radiation environments, providing insights for the design of robust electronic devices for space and nuclear applications.

MOSFET↗

Fluorinated Rocksalt‐Polyanion Cathode for Lithium‐Ion Batteries

Integrated rocksalt‐polyanion cathodes (DRXPS) are promising candidates for next‐generation lithium‐ion battery cathode materials that combine high energy density, stable cycling performance, and reduced reliance on Co and Ni. In this work, we investigated Li 3 Mn 1.6 P 0.4 O 5.4 F 0.6 , a new DRXPS cathode with fluoride incorporation. A pure spinel phase was formed and a discharge capacity retention of 84% was achieved after 200 cycles between 1.5 and 4.8 V versus Li/Li + . In comparison, the similarly synthesized Li 3 Mn 1.6 Nb 0.4 O 5.4 F 0.6 , in which all P 5+ was substituted by Nb 5+ while maintaining the same stoichiometry for all other elements, crystallized in a disordered rocksalt structure, and exhibited inferior capacity retention and rate capability than the P 5+ counterpart. Our findings expand the compositional space of DRXPS to include F − , justify the viability of integrating polyanion groups in rocksalt‐type cathodes, and highlight the superiority of P 5+ as a cation charge compensator compared to the commonly used Nb 5+ . This work thereby advances the design of robust, high‐performance cathode materials for sustainable batteries.

36 MATERIALS SCIENCE↗

Effect of Hydrostatic Pressure on Eu{sub 3−x}Sr{sub x}Bi{sub 2}S{sub 4−y}Se{sub y}F{sub 4} (x = 1 and 2 and y = 1.5 and 2) Superconductors

We have investigated the effect of pressure on Se-doped Eu{sub 2}SrBi{sub 2}S{sub 4}F{sub 4} and EuSr{sub 2}Bi{sub 2}S{sub 4}F{sub 4} at S sites. We report the electrical resistivity measurements under hydrostatic pressure (P) ~ 3 GPa and ~ 2.5 GPa on Eu{sub 2}SrBi{sub 2}S{sub 4−y}Se{sub y}F{sub 4} [dT{sub c}/dP ~ 1.68 K/GPa (x = 2)] and EuSr{sub 2}Bi{sub 2}S{sub 4−x}Se{sub x}F{sub 4} [dT{sub c}/dP ~ 1.57 K/GPa (x = 1.5) and 1.74 K/GPa (x = 2)] respectively. Pressure-induced superconductivity has been observed in EuSr{sub 2}Bi{sub 2}S{sub 2.5}Se{sub 1.5}F{sub 4} with T{sub c} of 2.42 K at 0.12 GPa and the T{sub c} increases with further application of P up to 3 GPa (dT{sub c}/dP ~ 1.12 K/GPa) and maximum T{sub c} of ~ 8 K is observed for EuSr{sub 2}Bi{sub 2}S{sub 2}Se{sub 2}F{sub 4.} These results corroborate the behavior of this material under high pressure magnetization studies. Further, the metallic nature is observed for EuSr{sub 2}Bi{sub 2}S{sub 2.5}Se{sub 1.5}F{sub 4}, EuSr{sub 2}Bi{sub 2}S{sub 2}Se{sub 2}F{sub 4}, and Eu{sub 2}SrBi{sub 2}S{sub 2}Se{sub 2}F{sub 4} compositions and it is slightly suppressed with the application of pressure. Pressure effect on upper critical field H{sub c2}(0) is estimated from magnetic field–dependent ρ(T) measurements and it is found to be higher for all compositions than parent compound. The field-dependent thermal activation energy (μ{sub 0}/k{sub B}) is calculated from Arrhenius plot using ρ(T) and designates a robust flux pinning potential which might be co-existing with applied magnetic field and pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

VUV Photodissociation Induced by a Deuterium Lamp in an Ion Trap

Tandem mass spectrometry represents an important analytical tool to unravel molecular structures and to study the gas-phase behavior of organic molecules. Besides commonly used methods like collision-induced dissociation and electron capture or transfer dissociation, new ultraviolet light–based techniques have the potential to synergistically add to the activation methods. Here, we present a new simple, yet robust, experimental design for polychromatic activation of trapped ions using the 115–160 nm output of a commercially available deuterium lamp. The resulting continuous dissociative excitation with photons of a wide energy range from 7.7 to 10.8 eV is studied for a comprehensive set of analyte classes in both positive and negative ion modes. While being simple, affordable, compact, and of low maintenance, the new setup initiates fragmentation of most precursor ions via their known dissociation pathways. Additionally, some new fragmentation patterns were discovered. Especially, electron loss and electron capture reactions with subsequent fragmentations were observed. For oligonucleotides, peptides, carbohydrates, and organic dyes, in comparison to collision-induced dissociation, a significantly wider fragment distribution was obtained, resulting in an information increase. Since the individual photons carry enough energy to post-ionize the nascent fragments, a permanent vacuum ultraviolet light exposure inside the ion trap potentially goes along with a general increase in detection capability. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗

Evolution of highly multimodal Rayleigh–Taylor instabilities

Rayleigh–Taylor (RT) instabilities are important fluid instabilities that arise in inertial confinement fusion (ICF) capsule implosions, and many other contexts. Multi-mode coupling is observed in experiments and plays a substantial role in material mix from RT instabilities. In this work, we study the evolution of highly multimodal perturbations (power law distribution) that approximate those found at manufactured material interfaces. We use simulations of over 2000 different perturbations in the LANL code xRAGE to identify distinct phases in the processes of bubble growth and bubble merger which can be visualized in a 2D phase portrait with clear regimes of mode growth and decay. Our results show that the dynamic evolution of the instability strongly depends on the mode of the perturbations and mode interactions. The merger process accelerates bubble growth. A non-Markovian region and a transition of the instability from: (1) initial exponential growth to (2) linear growth and to (3) quadratic growth and asymptotic behavior, are clearly captured in the phase space. We have developed a quantitative model of bubble growth that reproduces the dynamic behavior of ensembles of perturbations. Implications for ICF capsules designed for robustness against instabilities are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coupled flow-polymer dynamics via statistical field theory: Modeling and computation

Field-theoretic models, which replace interactions between polymers with interactions between polymers and one or more conjugate fields, offer a systematic framework for coarse-graining of complex fluids systems. While this approach has been used successfully to investigate a wide range of polymer formulations at equilibrium, field-theoretic models often fail to accurately capture the non-equilibrium behavior of polymers, especially in the early stages of phase separation. Here the 'two-fluid' approach serves as a useful alternative, treating the motions of fluid components separately in order to incorporate asymmetries between polymer molecules. In this work we focus on the connection of these two theories, drawing upon the strengths of each of the approaches in order to couple polymer microstructure with the dynamics of the flow in a systematic way. For illustrative purposes we work with an inhomogeneous melt of elastic dumbbell polymers, though our methodology will apply more generally to a wide variety of inhomogeneous systems. First we derive the model, incorporating thermodynamic forces into a two-fluid model for the flow through the introduction of conjugate chemical potential and elastic strain fields for the polymer density and stress. The resulting equations are composed of a system of fourth order PDEs coupled with a non-linear, non-local optimization problem to determine the conjugate fields. The coupled system is severely stiff and with a high degree of computational complexity. Next, we overcome the formidable numerical challenges posed by the model by designing a robust semi-implicit method based on linear asymptotic behavior of the leading order terms at small scales, by exploiting the exponential structure of global (integral) operators, and by parallelizing the non-linear optimization problem. The semi-implicit method effectively removes the fourth order stability constraint associated with explicit methods and we observe only a first order time-step restriction. The algorithm for solving the non-linear optimization problem, which takes advantage of the form of the operators being optimized, reduces the overall simulation time by several orders of magnitude. We illustrate the methodology with several examples of phase separation in an initially quiescent flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sorption kinetics and stability of conventional adsorbents for mercury remediation

In-situ remediation of mercury at numerous contaminated sites worldwide is a challenging and costly endeavor due to the persistency of this contaminant. In this study, we evaluated eight commercially available sorbent media ranging from carbon-, clays- and silica-based materials (PBC– Biochar, eSorb – Sorbster, nsPAC – Powdered Activated Carbon, fsPAC – Powdered Activated Carbon with Mackinawite, F300 – Filtrasorb 300, Si-SH – Silica Thiol, eBind – RemBind, Q-Clay – Organoclay PM-199), for their effectiveness in sorbing mercury (Hg 2+ ) and mercury complexed with dissolved organic matter (Hg-DOM). Under the chosen experimental conditions of this study, results showed that in the absence of DOM, the kinetic rates of Hg 2+ sorption onto the evaluated sorbents were in the order of 0.31 min-1 (Si-SH) to 2.98 min -1 (nsPAC), whereas in the presence of DOM, the rates varied from 0.16 min-1 (F300) to 0.95 min -1 (nsPAC). The measured sorption capacity for Hg 2+ in the absence of DOM varied from 3.02 mg/g (Q-Clay) to 35.15 mg/g (Si-SH), whereas in the presence of DOM, calculated partition coefficient (KD) ranged from 69.7 mL/g (Q-Clay) to 41,510 mL/g (Si-SH). Furthermore, kinetic data suggest liquid film diffusion was the rate-limiting steps governing mercury sorption onto the studied media. Overall, the obtained study parameters (kinetics/isotherm) are particularly important in informing robust engineering designs for deployment of the vast majority of evaluated sorbents. Thus, sorbent-based strategies offer viable solutions for cost-effective cleanup of mercury at industrially contaminated sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic tuning of confined sub-nanometer cobalt oxide clusters boosting oxygen catalysis and rechargeable Zn–air batteries.

Reasonable design of robust bifunctional oxygen catalysts from an electronic structure perspective is intriguing and challenging for the development of high active rechargeable zinc-air batteries (ZABs). In this study, the favorable regulation of the electronic structure of the cobalt oxide nanoclusters was firstly predicted by density functional theory (DFT) simulation, and then experimentally verified by confining sub-nanometer CoOx clusters (0.86 nm) into the small pore of ZIF-8 derived N-doped nanomaterials (PNC) using a microporous MOFs confinement strategy. The confined effect of the MOF micropores not only enhanced the stability of the subnanometer cobalt oxide clusters, but also make it coupled with Co-Nx to further regulate the electronic structure of the former, synergistic resulting in enhanced ORR/OER actives. As a result, the optimized 0.05CoOx@PNC catalyst demonstrates outstanding bifunctional oxygen performance with a smaller potential gap of 0.67 V. Moreover, the rechargeable Zn-air batteries integrated 0.05CoOx@PNC air cathode displays encouraging performance with a peak power density of 157.1 mW cm(-2), a specific capacity of 887 mAh g(Zn)(-1)at 10 mA cm(-2) and long-term cyclability for over 200 h, significantly outperforming the benchmark electrode couple consisted of Pt/C/RuO2. DFT calculation further revealed that reducing particle size and coupling with Co-N could effectively regulate the charge distribution of CoOx nanoclusters and downshift the D-band center of Co adsorption sites in CoOx nanoclusters, which reduced the reaction barrier of intermediate O-2* and OH* and ORR/ OER over potential, thus accelerating the overall ORR/OER kinetic process. This work offers a novel reference for the construction of a robust sub-nanometer cluster catalysts in the field of ZABs.

Bifunctional oxygen electrocatalysts↗

Consequence analyses of sabotage-induced radiological releases in high-temperature helium-cooled prismatic microreactors

Here, this study analyzes the radiological dose consequences of sabotage-induced accidents at three high-temperature helium-cooled prismatic microreactors (HTPMs) with thermal power ratings of 1, 10, and 50 MWt. Each HTPM employs uranium oxycarbide tristructural isotropic fuel enriched to 19.75 wt% high-assay low-enriched uranium. Simulations were conducted to estimate reactor core inventory at the point of fuel discharge––when the effective multiplication factor reduced to less than 1––representing peak radionuclide inventory. Postulated sabotage scenarios leading to reactor shutdown were analyzed at two intervals: immediately post-shutdown (0 h) and 3 days after shutdown using the SCALE code for radionuclide inventories and the RASCAL tool for dose consequences. Results show that although HTPMs benefit from inherent safety features and robust fuel design, radiological consequences scale with reactor power because of increased source term inventories. Smaller microreactors exhibited proportionally lower dose consequences. To support the economic and regulatory feasibility of microreactor deployment, this study emphasizes the value of a risk-informed, performance-based approach, as supported by regulations like 10 CFR Parts 100 and 53 in the United States. Microreactor developers should perform site-specific assessments of potential sabotage or low-probability, high-consequence events, especially when considering minimal on-site or full off-site emergency response.

Consequence↗