Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pillar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

An investigation of the star-forming main sequence considering the nebular continuum emission at low- z

Galaxy evolution has been studied by interpreting the spectral energy distribution of galaxies using spectral synthesis codes. This method has been crucial in discovering different pillars of modern galaxy evolution theories. However, this analysis was mostly carried out using spectral synthesis codes that are purely stellar, that is, they assume that the nebular contribution to the total continuum is negligible. The code FADO is the first publicly available population spectral synthesis tool that treats the contribution from ionised gas to the observed emission self-consistently. This is expected to have a particularly strong effect in star-forming (SF) galaxies. We study the impact of the nebular contribution on the determination of the star formation rate (SFR), stellar mass, and consequent effect on the star-forming main sequence (SFMS) at low redshift. We applied FADO to the spectral database of the SDSS to derive the physical properties of galaxies. As a comparison, we used the data in the MPA-JHU catalogue, which contains the properties of SDSS galaxies derived without the nebular contribution. We selected a sample of SF galaxies with Hα and Hβ flux measurements, and we corrected the fluxes for the nebular extinction through the Balmer decrement. We then calculated the Hα luminosity to estimate the SFR. Then, by combining the stellar mass and SFR estimates from FADO and MPA-JHU, the SFMS was obtained. The Hα flux estimates are similar between FADO and MPA-JHU. Because the Hα flux was used as tracer of the SFR, FADO and MPA-JHU agree in their SFR. The stellar mass estimates are slightly higher for FADO than for MPA-JHU on average. However, considering the uncertainties, the differences are negligible. With similar SFR and stellar mass estimates, the derived SFMS is also similar between FADO and MPA-JHU. Our results show that for SDSS normal SF galaxies, the additional modelling of the nebular contribution does not affect the retrieved fluxes and consequentially also does not influence SFR estimators based on the extinction-corrected Hα luminosity. For the stellar masses, the results point to the same conclusion. These results are a consequence of the fact that the vast majority of normal SF galaxies in the SDSS have a low nebular contribution. However, the obtained agreement might only hold for local SF galaxies, but higher-redshift galaxies might show different physical properties when FADO is used. This would then be an effect of the expected increased nebular contribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Overview on Heavy Flavor Production in Heavy Ion Collisions

The use of probes containing heavy quarks is one of the pillars for the study of medium formed in high energy nuclear collisions. The conceptual ideas formulated more than two decades ago, such as quark mass hierarchy of the energy that the probe lose in the media and color screening of bound heavy quarkonia states, have being challenged by the measurements performed at RHIC and LHC. A summary of the most recent experimental observations involving charm and bottom quarks in pp, pA, and AA collisions from collisions energies extending from √sNN =200 GeV to 8 TeV is presented. Finally, this manuscript also discuss possibilities of new measurements which can be at reach with increased statistics and detector upgrades.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Homogeneous deformation of Au-based metallic glass micropillars in compression at elevated temperatures

We performed high-temperature microcompression tests on micron-sized pillar samples fabricated from Au{sub 49}Ag{sub 5.5}Pd{sub 2.3}Cu{sub 26.9}Si{sub 16.3} metallic glass near the glass transition temperature to investigate the homogeneous deformation behavior. Samples were invariably deformed uniformly. The strength was observed to decrease with increasing temperature and decreasing strain rate. Plastic flow behavior can be described by a shear transition zone model. The activation energy and the size of the basic flow unit were both deduced and compared favorably with the theory.

36 MATERIALS SCIENCE↗

Optical properties of InGaN/GaN nanopillars fabricated by postgrowth chemically assisted ion beam etching

The optical properties of InGaN/GaN quantum wells, which were nanopatterned into cylindrical shapes with diameters of 2 {mu}m, 1 {mu}m, or 500 nm by chemically assisted ion beam etching, were investigated. Photoluminescence (PL) and time-resolved PL measurements suggest inhomogeneous relaxation of the lattice-mismatch induced strain in the InGaN layers. By comparing to a strain distribution simulation, we found that partial stain relaxation occurs at the free side wall, but strain remains in the middle of the pillar structures. The strain relaxation leads to an enhanced radiative recombination rate by a factor of 4-8. On the other hand, nonradiative recombination processes are not strongly affected, even by postgrowth etching. Those characteristics are clearly reflected in the doughnut-shape emission patterns observed by optical microscopy.

36 MATERIALS SCIENCE↗

Insights into the reactive ion etching mechanism of nanocrystalline diamond films as a function of film microstructure and the presence of fluorine gas

Inhomogeneous etching of nanocrystalline diamond (NCD) films, which produces nanopillars during reactive ion etching process, is problematic to the microfabrication of NCD films for the sensor and actuator applications. Thus, its origin was investigated for various initial microstructures of the NCD films, SF{sub 6}/O{sub 2} gas ratios during etching, and plasma powers. The etched NCD film surface roughness became more pronounced (leading to larger pillar diameters and heights) for larger initial microstructural features (larger grain and cluster sizes), particularly at low plasma powers. The surface roughening was significantly reduced with the addition of SF{sub 6}, almost disappearing at SF{sub 6}/O{sub 2} of 5% to 10%. These results indicate that the etch rate was locally enhanced at the interfaces between grains or clusters, and the etch rate disparity between intragranular and intergranular (or cluster) carbons increased with decreasing ion energy, implying a chemical reaction rate-limited etching mechanism. The role of SF{sub 6} could be explained to reduce the energy barrier for the chemical reaction of intragranular carbons. Here we suggest that the etching rate is limited by an energy barrier that could be reduced by defect generation during ion bombardment or by catalytic radicals.

36 MATERIALS SCIENCE↗

Controllable deformation of silicon nanowires with strain up to 24%

Fabricated silicon nanostructures demonstrate mechanical properties unlike their macroscopic counterparts. Here we use a force mediating polymer to controllably and reversibly deform silicon nanowires. This technique is demonstrated on multiple nanowire configurations, which undergo deformation without noticeable macroscopic damage after the polymer is removed. Calculations estimate a maximum of nearly 24% strain induced in 30 nm diameter pillars. The use of an electron activated polymer allows retention of the strained configuration without any external input. As a further illustration of this technique, we demonstrate nanoscale tweezing by capturing 300 nm alumina beads using circular arrays of these silicon nanowires.

36 MATERIALS SCIENCE↗

A New Methodology For In-Situ Residual Stress Measurement In MEMS Structures

In this paper, a new approach is presented for local residual stress measurement in MEMS structures. The newly proposed approach involves incremental focused ion beam (FIB) milling of annular trenches at material surface, combined with high resolution SEM imaging and Digital Image Correlation (DIC) analysis for the measurement of the strain relief over the surface of the remaining central pillar. The proposed technique allows investigating the average residual stress on suspended micro-structures, with a spatial resolution lower than 1 {mu}m. Results are presented for residual stress measurement on double clamped micro-beams, whose layers are obtained by DC-sputtering (PVD) deposition. Residual stresses were also independently measured by the conventional curvature method (Stoney's equation) on a similar homogeneous coating obtained by the same deposition parameters and a comparison and discussion of obtained results is performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high sensitivity test of the Pauli Exclusion Principle for electrons

One of the fundamental rules of nature and a pillar in the foundation of quantum theory and thus of modern physics is represented by the Pauli Exclusion Principle. We know that this principle is extremely well fulfilled due to many observations like the order of the elements and the stability of matter. Numerous experiments were performed to search for tiny violation of this rule in various systems. The VIP experiment at Gran Sasso underground laboratory is testing the validity of this principle for electrons with very high precision (order of 10{sup -30}). The layout of the present experiment, results obtained so far and new ideas to further increase the precision will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In situ nanomechanical testing in focused ion beam and scanning electron microscopes

The recent interest in size-dependent deformation of micro- and nanoscale materials has paralleled both technological miniaturization and advancements in imaging and small-scale mechanical testing methods. Here we describe a quantitative in situ nanomechanical testing approach adapted to a dual-beam focused ion beam and scanning electron microscope. A transducer based on a three-plate capacitor system is used for high-fidelity force and displacement measurements. Specimen manipulation, transfer, and alignment are performed using a manipulator, independently controlled positioners, and the focused ion beam. Gripping of specimens is achieved using electron-beam assisted Pt-organic deposition. Local strain measurements are obtained using digital image correlation of electron images taken during testing. Examples showing results for tensile testing of single-crystalline metallic nanowires and compression of nanoporous Au pillars will be presented in the context of size effects on mechanical behavior and highlight some of the challenges of conducting nanomechanical testing in vacuum environments.

36 MATERIALS SCIENCE↗

Recent Emulsion Technologies

Emulsion technologies are very much developed in the last decade and still developing in both the emulsion gel and the data taking. Emulsion detectors are suitable for the neutrino experiments because they can distinguish all 3 flavors of neutrino. The OPERA experiment, a recent pillar in the emulsion experiments aiming at the first observation of the neutrino oscillation in CNGS beam in appearance mode, is running, showing the good capability to separate 3 flavor neutrino interactions. In this poster, the recent developments and prospects of the emulsions for the next generation experiments are reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-step ion beam etching of sub-30 nm magnetic tunnel junctions for reducing leakage and MgO barrier damage

We have demonstrated the fabrication of sub 30 nm magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy. The multi-step ion beam etching (IBE) process performed for 18 min between 45 deg. and 30 deg. , at 500 V combined ion supply voltage, resulted in a 55 nm tall MTJ with 28 nm diameter. We used a negative tone electron beam resist as the hard mask, which maintained its lateral dimension during the IBE, allowing almost vertical pillar side profiles. The measurement results showed a tunnel magneto-resistance ratio of 13% at 1 k{Omega} junction resistance. With further optimization in IBE energy and multi-step etching process, it will be possible to fabricate perpendicularly oriented MTJs for future sub 30 nm non-volatile magnetic memory applications.

36 MATERIALS SCIENCE↗

Photonuclear reactions: Past, present, and future

This contribution is supposed to provide an introduction to the discussion of future research opportunities at the planned {gamma}-ray beam of the ELI-Nuclear Physics pillar. It contains a brief overview on the history of photonuclear science, some fundamental facts on photonuclear reactions at energies below 20 MeV, a few examples for recent photonuclear research, and a brief outlook to a future with ELI-NP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Holographic modification of TiO{sub 2} nanostructure for enhanced charge transport in dye-sensitized solar cell

We show that the photocurrent and energy conversion efficiency of dye-sensitized solar cells can be greatly enhanced with holographic modification to the morphology of TiO{sub 2} electrode. The nanoporous electrode coated onto conducting glass was irradiated by three interfering laser beams at 1064 nm incident from the backside of the substrate. This generated two-dimensional periodic pillars of higher density in the electrode, through which the photoexcited electrons could be extracted more effectively. The cells fabricated with modified electrodes exhibited average photocurrent and efficiency of 17.14 mA/cm{sup 2} and 9.03%, while 14.91 mA/cm{sup 2} and 7.83% were obtained from the reference cells. It was attributed to the enhanced charge transport accompanied by the reduction of internal resistance of the electrode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Superallowed nuclear beta decay: Precision measurements for basic physics

For 60 years, superallowed 0{sup +}{yields}0{sup +} nuclear beta decay has been used to probe the weak interaction, currently verifying the conservation of the vector current (CVC) to high precision ({+-}0.01%) and anchoring the most demanding available test of the unitarity of the Cabibbo-Kobayashi-Maskawa (CKM) matrix ({+-}0.06%), a fundamental pillar of the electroweak standard model. Each superallowed transition is characterized by its ft-value, a result obtained from three measured quantities: the total decay energy of the transition, its branching ratio, and the half-life of the parent state. Today's data set is composed of some 150 independent measurements of 13 separate superallowed transitions covering a wide range of parent nuclei from {sup 10}C to {sup 74}Rb. Excellent consistency among the average results for all 13 transitions - a prediction of CVC - also confirms the validity of the small transition-dependent theoretical corrections that have been applied to account for isospin symmetry breaking. With CVC consistency established, the value of the vector coupling constant, G{sub V}, has been extracted from the data and used to determine the top left element of the CKM matrix, V{sub ud}. With this result the top-row unitarity test of the CKM matrix yields the value 0.99995(61), a result that sets a tight limit on possible new physics beyond the standard model. To have any impact on these fundamental weak-interaction tests, any measurement must be made with a precision of 0.1% or better - a substantial experimental challenge well beyond the requirements of most nuclear physics measurements. I overview the current state of the field and outline some of the requirements that need to be met by experimentalists if they aim to make measurements with this high level of precision.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope

A general nano-mechanical test platform capable of performing variable temperature and variable strain rate testing in situ in the scanning electron microscope is described. A variety of test geometries are possible in combination with focused ion beam machining or other fabrication techniques: indentation, micro-compression, cantilever bending, and scratch testing. The system is intrinsically displacement-controlled, which allows it to function directly as a micro-scale thermomechanical test frame. Stable, elevated temperature indentation/micro-compression requires the indenter tip and the sample to be in thermal equilibrium to prevent thermal displacement drift due to thermal expansion. This is achieved through independent heating and temperature monitoring of both the indenter tip and sample. Furthermore, the apex temperature of the indenter tip is calibrated, which allows it to act as a referenced surface temperature probe during contact. A full description of the system is provided, and the effects of indenter geometry and of radiation on imaging conditions are discussed. The stabilization time and temperature distribution throughout the system as a function of temperature is characterized. The advantages of temperature monitoring and thermal calibration of the indenter tip are illustrated, which include the possibility of local thermal conductivity measurement. Finally, validation results using nanoindentation on fused silica and micro-compression of <100> silicon micro-pillars as a function of temperature up to 500 Degree-Sign C are presented, and procedures and considerations taken for these measurements are discussed. A brittle to ductile transition from fracture to splitting then plastic deformation is directly observed in the SEM for silicon as a function of temperature.

36 MATERIALS SCIENCE↗

Cross-plane thermoelectric transport in p-type La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/LaMnO{sub 3} oxide metal/semiconductor superlattices

The cross-plane thermoelectric transport properties of La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO)/LaMnO{sub 3} (LMO) oxide metal/semiconductor superlattices were investigated. The LSMO and LMO thin-film depositions were performed using pulsed laser deposition to achieve low resistivity constituent materials for LSMO/LMO superlattice heterostructures on (100)-strontium titanate substrates. X-ray diffraction and high-resolution reciprocal space mapping indicate that the superlattices are epitaxial and pseudomorphic. Cross-plane devices were fabricated by etching cylindrical pillar structures in superlattices using inductively, this coupled-plasma reactive-ion etching. The cross-plane electrical conductivity data for LSMO/LMO superlattices reveal a lowering of the effective barrier height to 223 meV as well as an increase in cross-plane conductivity by an order of magnitude compared to high resistivity superlattices. These results suggest that controlling the oxygen deficiency in the constituent materials enables modification of the effective barrier height and increases the cross-plane conductivity in oxide superlattices. The cross-plane LSMO/LMO superlattices showed a giant Seebeck coefficient of 2560 {mu}V/K at 300 K that increases to 16 640 {mu}V/K at 360 K. The giant increase in the Seebeck coefficient with temperature may include a collective contribution from the interplay of charge, spin current, and phonon drag. The low resistance oxide superlattices exhibited a room temperature cross-plane thermal conductivity of 0.92 W/m K, this indicating that the suppression of thermal conductivities due to the interfaces is preserved in both low and high resistivity superlattices. The high Seebeck coefficient, the order of magnitude improvement in cross-plane conductivity, and the low thermal conductivity in LSMO/LMO superlattices resulted in a two order of magnitude increase in cross-plane power factor and thermoelectric figure of merit (ZT), compared to the properties of superlattices with higher resistivity that were reported previously. The temperature dependence of the cross-plane power factor in low resistance superlattices suggests a direction for further investigations of the potential LSMO/LMO oxide superlattices for thermoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Purcell effect on the purity of bright single photon sources

Purcell effect is a powerful tool to efficiently collect single photons emitted by semiconductor quantum dots. However, it is common to observe a degraded single photon purity when a quantum dot is inserted in an optical microcavity. Here, we investigate the role of the cavity coupling on the single photon purity for a quantum dot deterministically coupled to a pillar cavity mode. We show that the degradation of the purity cannot be attributed to cavity feeding effects but is fully explained by recapture processes. A good single photon purity is therefore easily restored using an intra-dot excitation scheme.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chromosome aberrations and cellular premature senescence as radiation-induced sub-lethal effects: Implications for laser-driven charged-particle radiotherapy

The use of charged particles significantly reduces the dose absorbed by normal cells due to the inverse dose-depth deposition profile. This is the physical pillar justifying hadrontherapy as the eligible treatment for deepseated tumours. However, a non-negligible amount of radiation is nevertheless absorbed in correspondence with the plateau region of the Bragg curve, which may result in the induction of sub-lethal effects. Very little experimental data exist on the induction of such effects. Moreover, reliable follow-up data on such adverse effects in hadrontherapy patients are limited since this type of treatment has been adopted relatively recently. A fortiori, the dependence of sub-lethal effects on unprecedented factors, such as the exceedingly high dose rates and/or the pulsed nature of beams originated by laser interaction with target materials, is unknown. This warrants investigation prior to a therapeutic use of such beams.

62 RADIOLOGY AND NUCLEAR MEDICINE↗