Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Solvent structure and dynamics over Brønsted acid MWW zeolite nanosheets

In the liquid phase of heterogeneous catalysis, solvent plays an important role and governs the kinetics and thermodynamics of a reaction. Although it is often difficult to quantify the role of the solvent, it becomes particularly challenging when a zeolite is used as the catalyst. This difficulty arises from the complex nature of the liquid/zeolite interface and the different solvation environments around catalytically active sites. Here, we use ab initio molecular dynamics simulations to probe the local solvation structure and dynamics of methanol and water over MWW zeolite nanosheets with varying Brønsted acidity. We find that the zeolite framework and the number and location of the acid sites in the zeolite influence the structure and dynamics of the solvent. In particular, methanol is more likely to be in the vicinity of the aluminum (Al 3+ ) at the T4 site than at T1 due to easy accessibility. The methanol oxygen binds strongly to the Al at the T4 site, weakening the Al–O for the bridging acid site, which results in the formation of the silanol group, significantly reducing the acidity of the site. The behavior of methanol is in direct contrast to that of water, where protons can easily propagate from the zeolite to the solvent molecules regardless of the acid site location. Furthermore, our work provides molecular-level insights into how solvent interacts with zeolite surfaces, leading to an improved understanding of the catalytic site in the MWW zeolite nanosheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectron–residual-ion interaction in angle-resolved streaked shake-up ionization of helium

Streaked photoelectron emission spectra access the correlated dynamics of photoelectrons and residual target electrons with attosecond temporal resolution. Here, we calculated ab initio single-ionization spectra for photoemission from helium atoms by colinearly polarized ultrashort XUV and assisting few-femtosecond IR pulses. Distinguishing direct and shake-up ionization resulting in ground-state and excited (𝑛 = 2, 3) He + residual ions, respectively, we examined the effects of the correlated photoemission dynamics on the photoelectron phase accumulation as a function of the observable photoelectron detection direction and kinetic energy and XUV–IR pulse delay. We tracked the dynamical evolution of the residual ion in relative streaked photo- emission delays and found dominant contributions for shake-up emission from the residual-ion–photoelectron interaction. These are in very good and fair agreement, respectively, for 𝑛 = 2 and 𝑛 = 3 shake-up photoemission along the pulse-polarization directions, with previous experimental and theoretical investigations [Ossiander et al ., Nat. Phys. 13, 280 (2017)] and reveal a strong photoemission-direction dependence for shake-up ionization due to the coupling between the photoelectron and evolving residual-ion charge distribution in the IR-laser field.

Stark effect↗

Recovering Gardner restacking with purely diffusive operations

The maximum particle kinetic energy that can be extracted from an initial six-dimensional phase space distribution motivates the concept of free or available energy. The free energy depends on the allowed operations that can be performed. A key concept underlying the theoretical treatment of plasmas is the Gardner free energy, where the exchange of the contents of equal phase volumes is allowed. Further, a second free energy concept is the diffusive free energy, in which the contents of volumes are instead averaged. For any finite discretization of phase space, the diffusive free energy is known to be less than the Gardner free energy. However, despite the apparent fundamental differences between these free energies, it is demonstrated here that the Gardner free energy may be recovered from the continuous limit of the diffusive free energy, leading to the surprise that macroscopic phase-space conservation can be achieved by ostensibly entropy-producing microscopic operations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Supramolecular bending and twisting in the hierarchical self-assembly of monodisperse mesogenic oligomers

Understanding how different forms of supramolecular curvature arise during assembly is crucial to designing and tuning the microstructure of hierarchically self-assembled materials. Here, we show that in crystalline phases of mesogenic oligomers, the oligomer length is a critical parameter that determines the type of curvature (Gaussian or cylindrical) exhibited by the self-assembled structures. We use iterative exponential growth to synthesize monodisperse mesogenic oligomers ranging from dimer to octamer. By analyzing their phase behavior and microstructure, we elucidate how length-dependent thermodynamic and kinetic effects tune their hierarchical degree of ordering. The oligomers’ length-dependent crystalline order drives the formation of scrolled sheets in shorter oligomers and twisted ribbons in longer oligomers. These studies highlight how oligomer length interplays with mesogen geometry and crystalline packing to drive self-assembly, introducing oligomer length as a powerful design parameter toward tailored applications of mesogenic systems.

36 MATERIALS SCIENCE↗

TChem 2.0

The TChem toolkit is an object-oriented C++ software library that enables numerical simulations using complex chemistry and facilitates the analysis of detailed kinetic models. The toolkit provides capabilities for thermodynamic properties and gas-phase and surface chemistry. The computations rely on the Kokkos framework for parallel execution on many-core and GPU-based platforms. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525. SAND2021-2752 O

Kim, Kyungjoo↗

Electronic glasses from a broken gauge symmetry in disorder-free systems

Glass phases can be stabilized by quenched disorders, as in most spin-glass materials, or self-generated through kinetic freezing in disorder-free systems. A canonical example of the latter is structural glasses, which have been extensively studied for many decades. Yet, how the rugged energy landscape of a glass phase is spontaneously generated in disorder-free systems remains one of the key questions in glass physics. Here, in this work, we present a general electronic mechanism for the emergence of glassy phase using the example of itinerant electrons coupled to XY spins on a lattice. This model can also be viewed as the mean-field theory of a superconducting system with attractive density-density interactions. Intriguingly, the electron gauge symmetry in the strong pairing limit gives rise to a macroscopic degeneracy of XY spins. In the presence of electron hopping that breaks the gauge symmetry, the lifting of the extensive degeneracy leads to a glass phase with disordered pairings. Our findings highlight a scenario in which a glassy state originates from the breaking of quantum gauge symmetry without quenched disorders.

XY model↗

Multiphase Processing of the Water-Soluble and Insoluble Phases of Biomass Burning Organic Aerosol

Biomass burning is one of the most significant sources of organic aerosol in the atmosphere. Biomass burning organic aerosol (BBOA) has been observed to undergo liquid– liquid phase separation (LLPS) to give core–shell morphology with the hydrophobic phase encapsulating the hydrophilic phase, potentially impacting the evolution of light-absorbing components, i.e., brown carbon (BrC), through multiphase processes. Here, we demonstrate how multiphase processing differs between the watersoluble (i.e., hydrophilic) and insoluble (i.e., hydrophobic) phases of BBOA in terms of reactive uptake of ozone in a coated-wall flow tube. Effects of relative humidity (RH) and ultraviolet (UV) irradiation were investigated. Experimental timeseries were used to inform simulations using multilayer kinetic modeling. Among non-irradiated thin films, the uptake coefficient was greatest for the water-soluble phase at 75% RH (3 × 10 –5 , corresponding to a diffusion coefficient of BrC, D BrC , of 3 × 10 –9 cm 2 s –1 ) and least for the same phase at 0% RH (1 × 10 –5 , corresponding to D BrC of 1 × 10 –10 cm 2 s –1 ). The uptake coefficient for the water-insoluble phase fell between these two (about 1.5 × 10 –5 ), regardless of RH, and the corresponding D BrC increased only slightly (8 × 10 –10 cm 2 s –1 at 0% RH to 9 × 10 –10 cm 2 s –1 at 75% RH). The uptake coefficients of both phases at 0% RH decreased significantly after UV irradiation, consistent with a transition from viscous liquid to solid and supported by qualitative microscopy observations. Modeling multiphase ozone oxidation of primary BrC components in the atmosphere demonstrated, first, that LLPS may extend the lifetime of water-soluble BBOA encapsulated by water-insoluble species by a factor of 1.5 at moderate to high RH and, also, that UV irradiation may extend the lifetime of both phases by more than a factor of 2.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into Defect-Mediated Nucleation of the Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys

A fine scale second phase distribution is important for strengthening metallic materials. High precipitate density is often difficult to achieve due to sluggish precipitation kinetics and limited nucleation sites. Based on the CALPHAD predictions, transition element-based complex concentrated alloys (CCAs)/ High Entropy Alloys (HEAs), have a highly stable face-centered cubic (FCC) phase and intermetallic B2 phase. The precipitation of the strengthening B2 phase is often limited to low fractions in these alloys due to a high nucleation barrier in the FCC matrix. Here, by illustrating in three different alloys, we present a defect mediated nucleation of a high fraction equilibrium B2 phase. The degree of cold work is used to manipulate the phase fraction, morphology, and distribution of B2 precipitates. Our approach synergistically improves the strength and ductility of these alloys and is widely applicable to many other complex alloys.

Sharma, Abhishek↗

Understanding the TiH (2-x) /TiO y System at Elevated Temperature: A Literature Review

Titanium hydride of varying TiH stoichiometry is used in pyrotechnic compositions. In order to yield consistent performance, manufacturing processes must be developed to ensure precise and reproducible material properties, including composition and morphology. Legacy synthesis protocols are not comprehensive nor are the required apparatuses still available. To guide the development of novel production procedures, this report reviews literature on relevant chemical reactions and diffusion events occurring at elevated temperature in the TiH (2-x) /TiO y system. Titanium hydride exposed to air spontaneously forms a passivating oxide layer. Upon heating, significant hydrogen release, which is accompanied by changes to the surface oxide layer, is noted by 375–400°C. At higher temperatures (above about 500°C) the oxide layer is reported to be essentially nonexistent as a result of oxide-layer dissolution processes and, potentially, oxide-layer reduction due to water formation. Based on the reviewed literature, we hypothesize that, by 500°C, the surface layer consists of an oxyhydride phase, which is a solid solution of oxygen in titanium hydride. We believe that hydrogen release from titanium hydride is controlled by the kinetics of molecular hydrogen desorption on the oxyhydride surface. No literature data is available for corresponding activation energies of the dynamic desorption process, and the equilibrium phase diagram of this three-component system remains largely unexplored as well. These gaps in knowledge might be addressed through coordinated computational modeling and experimental efforts.

36 MATERIALS SCIENCE↗

The real-time data processing and acquisition system for Project 8 Phase II

In Phase II of the Project 8 neutrino mass experiment, electrons from the decays of tritium or 83m Kr are detected via their ≈26 GHz cyclotron radiation while contained within a circular waveguide. The signal from a given electron is characterized as a brief chirp, lasting ≲10 ms and changing in frequency by ≲1 MHz/ms. To detect these signals, the Project 8 collaboration developed a Data Acquisition (DAQ) system tailored to the signal properties. The DAQ is responsible for simultaneously selecting up to three 100 MHz-wide frequency windows to study, detect, and trigger on likely signals from different electron kinetic energies, and for writing the relevant data to disk. Finally, we describe the Phase II DAQ system in detail and address how the system was used for data-taking operations.

Data acquisition↗

In situ study on heavy ion irradiation induced microstructure evolution in single crystal Cu with nanovoids at elevated temperature

Understanding the response of nanovoids to irradiation damage advances our capability to design radiation tolerant materials. Recent in situ studies reveal the shrinkage of hexagon-shaped nanovoids in (110) textured Cu. However, the evolution of voids with irregular geometries under irradiation is less well understood. Here, in situ Kr ion irradiation was performed at 100 °C on single-crystal Cu (112) that possesses nanovoids with high aspect ratio. In situ studies show these elongated voids fragment into smaller voids and shrink gradually with increasing dose. Phase field simulations confirm that fragmentation of the void is governed by the competing kinetics between atoms diffusing toward and away from the elongated nanovoid. In conclusion, cost irradiation analysis reveals the formation of high-density defect clusters.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Predicting the recovery and grade of a rougher flotation circuit from liberation data

A flotation model has been validated against the survey data obtained from a copper rougher flotation circuit with a circulating load. Here, the model was developed using the hydrophobic force as a kinetic parameter, which made it possible to use the contact angles of the free and composite particles as input parameters so that the model can predict both recoveries and grades. The model also recognizes the role of bubble coarsening in determining the froth phase recoveries and grades. The model predictions are in good agreement with the survey data. The size-by-size recovery curve as predicted from the model shows an optimum particle size range that is consistent with most of the operating data reported in the literature. The model suggests that the upper particle size limit may be determined by the instability of the froth phase rather than the turbulence in the pulp phase of a flotation cell.

36 MATERIALS SCIENCE↗

Engineering Assembly Kinetics and Line Roughness in Solvent Vapor-Annealed Block Copolymer/Homopolymer Blends

Block copolymer (BCP) directed self-assembly (DSA) is a promising route to enhance lithography resolution by multiplying nanopattern density and reducing feature roughness. Eliminating kinetically trapped self-assembly defects requires fast self-assembly. However, acceleration strategies like solvent vapor annealing or homopolymer blending broaden domain interfaces, implying a trade-off in increased feature roughness. In this work, we experimentally investigate this apparent dilemma between self-assembly kinetics and line roughness for solvent vapor-annealed thin films of a lamellar poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) BCP blended with PS and P2VP homopolymers. Binary blends with PS or P2VP homopolymers and ternary blends incorporating both in equal weight fractions were solvent vapor annealed using acetone, a near-neutral solvent for PS and P2VP, followed by P2VP-selective vapor-phase infiltration with alumina (AlOx) and polymer etching. Binary blends with P2VP exhibit a modest kinetic enhancement but also higher line-edge and -width roughness due to the increased frequency of P2VP protrusions and bridge defects in the alumina line patterns. In contrast, binary blends with PS self-assemble noticeably faster, while domain asymmetry from the added PS homopolymer reduces roughness by curbing the number of alumina protrusions and bridge defects. Ternary blends maintain DSA line patterns across a wider composition window and, at higher homopolymer loadings, reduce roughness at length scales near the lamellar period, consistent with a reduced impact of intradomain compositional fluctuations. These findings provide important insights for codesigning blend compositions and process flows to achieve high-resolution, defect free patterns with minimal roughness through BCP DSA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temporal Ni K-Edge X-ray Absorption Spectroscopy Study Reveals the Kinetics of the Ni Redox Behavior of the Iron-Nickel Oxide Bimetallic OER Catalyst

Operando X-ray absorption spectroscopy (XAS) can be utilized to probe the phase and structural changes of FeNiOx and similar transition metal oxide electrocatalysts during electrocatalytic reactions. However, capturing the temporal changes occurring in the operando chemistry of electrocatalysts has been little studied. Here, in this work, we successfully capture the time-resolved changes at the Ni K-edge for both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions of an aqueous phase synthesized FeNiO x bimetallic nanoparticle electrocatalyst. During a stepped voltage experiment, the temporal change in the Ni K-edge was observed as the applied voltage was stepped from 0.7 to 0.8 V versus the silver/silver chloride reference electrode, and the change observed is associated with the Ni redox transition from the 2+ to 3+/4+ oxidation state. Individual XAS spectra were obtained in 90 s, and a total of 9 scans post voltage step showed a unique transition from a hydroxide to an oxyhydroxide phase. The shift in absorption edge energy position and the changes in spectral shape for individual scans explain the typically observed broadening of the Ni K-edge XANES spectrum during time-averaged operando XAS, and a kinetic analysis revealed a first-order observed rate constant, |k obs |, of 0.00426 s –1 and a half-life (t 1/2 ) of 163 s. Multivariate curve resolution-alternating least squares analysis followed by linear combination fitting analysis for time-averaged versus time-resolved Ni K-edge changes upon voltage step show distinct differences in estimated contributions from Ni 2+ oxide/hydroxide phases. Detailed EXAFS modeling shows the phase transition from hydroxide to oxyhydroxide on top of the unchanged metallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Fundamental Creep Behavior Model of Gr.91 Alloy by ICME Approach (Final Report)

The current project mainly focused on the fundamental creep cracking mechanism of the Grade 91 system during the operation conditions in the advanced technologies FE power plants and build the link among Composition-Processing Parameters-Phase Stability-Microstructure-Creep Resistance. A model based on computational thermodynamics and diffusion kinetics will be developed to provide guidance on how to improve the creep resistance of the alloy system. The PI mainly investigate the Gr.91 base alloy and weldment with the Integrated Computational Materials Engineering (ICME) approach. The long-term goal of the proposed program is to develop a model for creep and fatigue resistant alloys with different elemental systems, compositions, and processing parameters of weldment and heat-treatment. In addition, new creep and fatigue resistant alloys are to be designed based on the predictions from the model. The computational as well as experimental results include three sections: 1) The compositional optimization and secondary phases evaluation regarding the creep resistance in Grade 91 steel through the CALPHAD approach. In this section, the formation of the critical secondary phases, M23C6, MX and Z-phase were well predicted based on many conditions like the temperature as well as compositions. Meanwhile, the role of different alloying elements was also considered as they will directly affect the formation of the secondary phases mentioned above based on the compositional evolution of the alloying elements. 2) An investigation of Creep Resistance in Grade 91 Steel through Computational Thermodynamics. We systematically considered the evolution of the four critical temperatures, Ac3, Ac1, the threshold of M23C6 and Z-phase, on basis of the computational approach. Meanwhile, the equilibrium cooling as well as Scheil simulations were also considered to perform further predictions based on the different cooling rates. 3) Creep lifetime and microstructural evolution of the Grade 91 steel. In this part, mainly experimental approach was performed on the real creep test from the beginning of the commercial Gr.91 alloys. The alloys were normalized, tempered, welded (Gleeble) and PWHT and finally subjected to the creep lifetime analyses. Finally, all the samples after each process were further characterized based on the OM, XRD and SEM technique to draw final conclusions.

01 COAL, LIGNITE, AND PEAT↗

Lattice Boltzmann simulation of the dissolution of slag in alkaline solution using real-shape particles

Highlights: • A dissolution numerical model was proposed to capture the real dissolution kinetics of slag in alkaline solution. • The log forward dissolution rate of Si was described as a function of NBO/T and solution pH. • A threshold solid volume fraction of 0.688 was found for a voxel in 3D, 63.8% larger than that for a pixel in 2D. • The proposed dissolution numerical model provides a reliable alternative to study the dissolution kinetics of slag. A dissolution numerical model was proposed in this study to capture the real dissolution kinetics of slag in alkaline solution. It consists of three modules, i.e. (i) simulation of the initial particle parking structure of slag in alkaline solution using real-shape particles of slag, (ii) simulation of the chemical reactions between slag and solution based on the transition state theory, and (iii) simulation of the physical transport of aqueous ions using the lattice Boltzmann method. This dissolution numerical model was verified using experimental results, showing reasonable accuracy. After verification, the dissolution numerical model was implemented to study the influences of temperature and particle shape using a proper recipe of slag in alkaline solution. This recipe was designed to avoid solid phase precipitation or gel formation via thermodynamic analysis. The simulation results showed faster dissolution kinetics of slag when using higher temperatures and more irregular particle shapes.

36 MATERIALS SCIENCE↗

Microstructure-dependent rate theory model of defect segregation and phase stability in irradiated polycrystalline LiAlO 2

We report gamma lithium aluminate (LiAlO 2 ) is a breeder material for tritium and is one of key components in a tritium-producing burnable absorber rod (TPBAR). Dissolution and precipitation of second phases such as LiAl 5 O 8 and voids are observed in irradiated LiAlO 2 . Such microstructure changes cause the degradation of thermomechanical properties of LiAlO 2 and affect tritium retention and release kinetics, and hence, the TPBAR performance. In this work, a microstructure-dependent model of radiation-induced segregation (RIS) has been developed for investigating the accumulation of species and phase stability in polycrystalline LiAlO 2 structures under irradiation. Three sublattices (i.e. [Li, Al, V] I [O, V o ] II [Li i , Al i , O i , V i ] III ), and concentrations of six diffusive species (i.e. Li; vacancy of Li or Al at [Li, Al, V] I sublattice, O vacancy at [O, V o ] II sublattice, and Li, Al and O interstitials at [Li i , Al i , O i , V i ] III interstitial sublattices; are used to describe spatial and temporal distributions of defects and chemistry. Microstructure-dependent thermodynamic and kinetic properties including the generation, reaction, and chemical potentials of defects and defect mobility are taken into account in the model. The parametric studies demonstrated the capability of the developed RIS model to assess the effect of thermodynamic and kinetic properties of defects on the segregation and depletion of species in polycrystalline structures and to explain the phase stability observed in irradiated LiAlO 2 samples. The developed RIS model will be extended to study the precipitation of LiAl 5 O 8 and voids and tritium retention by integrating the phase-field method.

36 MATERIALS SCIENCE↗