Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Gravity as a Portal to Reheating, Leptogenesis and Dark Matter

Considering graviton as the only messenger that exists between the inflaton, the dark sector and the Standard Model (SM), we show, it is possible to simultaneously generate the observed relic density of dark matter (DM), the baryon asymmetry via leptogenesis, as well as successful reheating after inflation. Assuming the inflaton Φ oscillates in a monomial potential V(Φ) ∝ Φ k at the end of inflation, reheating via minimal gravitational interaction turns out to be excluded due to excessive production of gravitational wave (GW) energy density from inflation. We thus (a) extend the minimal model by considering a non-minimal gravitational contribution to radiation and (b)) propose an explanation for the PeV excess observed by IceCube, when the DM has an explicit Yukawa coupling to the SM leptong and Higgs. We also propose a novel scenario, where the gravitational production is a two-step process, through the production of a pair of scalars, that eventually decay into fermionic final states. Our framework gives rise to detectable primordial GW signal, that falls within the sensitivity of several proposed GW detectors.

Barman, Basabendu↗
NASA NTRS1978

Investigation of a staged plasma-focus apparatus

A new staged plasma-focus geometry combining two Mather-type plasma-focus guns was constructed, and the current-sheet dynamics were investigated. The production of simultaneous pairs of plasma foci was achieved. The intensities of X-ray and fusion-neutron emission were measured and found to agree with the scaling law for a plasma focus. Advantages of this new geometry include the possibility of using plasma-focus type pinches in multiple arrays at power levels beyond the validity regime of the current scaling law for a single gun.

Lee, J. H.↗
NASA NTRS1992

Formation of negative ions by electron impact on SiF4 and CF4

First measurements of cross sections for the formation of negative ions by electron attachment to SiF4 and CF4 are reported for an electron impact energy range of 0 to 50 eV. The energies at which the various ions appear and the positions at which the ionization efficiency curves peak have been obtained and compared with previous measurements. Thermochemical data have been used to predict and identify the various channels of dissociation. Cross sections for the production of ion pairs through the process of polar dissociation have also been measured.

Iga, I.↗
NASA NTRS1992

Nonenzymatic template-directed synthesis on oligodeoxycytidylate sequences in hairpin oligonucleotides

We have developed a novel method for studying template-directed synthesis in hairpin oligonucleotides. An unpaired segment at the 5'-terminus of the hairpin acts as an intramolecular template for the extension of the paired 3'-terminus. Products are analyzed by denaturing gel electrophoresis of [32P]-labeled hairpins. Using this system, we have studied the synthesis of oligoguanylates on an oligodeoxycytidylate template. We find that guanosine 5'-phosphoro(2-methyl)imidazolide adds efficiently to a terminal riboguanylate residue at temperatures in the range 0-37 degrees C but not at 50 degrees C. At 0 degree C, the half-time for addition of the first G residue is about 3 h, and the reaction rate is independent of pH in the range 6.5-8.0. The first addition reaction results in the formation of a predominantly 3'-5'-internucleotide bond. When the 3'-terminal riboguanylate residue is placed by a deoxyguanylate residue, the half-time for the first addition increases from about 3 to about 30 h.

NASA Discipline Exobiology↗
NASA NTRS2004

Article Screening System

During the last ten years patents directed to luggage scanning apparatus began to appear in the patent art. Absent from the variety of approaches in the art is stereoscopic imaging that entails exposing two or more images of the same object, each taken from a slightly different perspective. If the perspectives are too different, that is. if there is too much separation of the X-ray exposures, the image will look flat. Yet with a slight separation, a stereo separation, interference occurs. Herein a system is provided for the production of stereo pairs. One perspective, a left or a right perspective angle, is first established. Next, the other perspective angle is computed. Using these left and right perspectives the X-ray sources can then be spaced away from each other.

Kenneth R Fernandez↗
NASA NTRS2007

Fabrication of Polyimide-Matrix/Carbon and Boron-Fiber Tape

The term HYCARB denotes a hybrid composite of polyimide matrices reinforced with carbon and boron fibers. HYCARB and an improved process for fabricating dry HYCARB tapes have been invented in a continuing effort to develop lightweight, strong composite materials for aerospace vehicles. Like other composite tapes in this line of development, HYCARB tapes are intended to be used to build up laminated structures having possibly complex shapes by means of automated tow placement (ATP) - a process in which a computer-controlled multiaxis machine lays down prepreg tape or tows. The special significance of the present process for making dry HYCARB for ATP is that it contributes to the reduction of the overall cost of manufacturing boron-reinforced composite-material structures while making it possible to realize increased compression strengths. The present process for making HYCARB tapes incorporates a "wet to dry" process developed previously at Langley Research Center. In the "wet to dry" process, a flattened bundle of carbon fiber tows, pulled along a continuous production line between pairs of rollers, is impregnated with a solution of a poly(amide acid) in N-methyl-2-pyrrolidinone (NMP), then most of the NMP is removed by evaporation in hot air. In the present case, the polyamide acid is, more specifically, that of LaRC. IAX (or equivalent) thermoplastic polyimide, and the fibers are, more specifically, Manganite IM7 (or equivalent) polyacrylonitrile- based carbon filaments that have a diameter of 5.2 m and are supplied in 12,000-filament tows. The present process stands in contrast to a prior process in which HYCARB tape was made by pressing boron fibers into the face of a wet carbon-fiber/ poly(amide acid) prepreg tape . that is, a prepreg tape from which the NMP solvent had not been removed. In the present process, one or more layer(s) of side-by-side boron fibers are pressed between dry prepreg tapes that have been prepared by the aforementioned gwet to dry h process. The multilayer tape is then heated to imidize the matrix material and remove most of the remaining solvent, and is pressed to consolidate the multiple layers into a dense tape. For tests, specimens of HYCARB tapes and laminated composite panels made from HYCARB tape were prepared as follows: HYCARB tapes were fabricated as described above. Each panel was made by laying down ten layers of tape, containing, variously, one, two, or three boron-fiber plies and the remainder carbon- fiber-only plies (see figure). Each panel was made by laying down ten layers of tape. Each panel was then cured by heating to a temperature of 225 C for 15 minutes, then pressing at 200 psi (A1.4 MPa) while heating to 371 C, holding at 371 C for 1 hour, then continuing to hold pressure during cooling. Control specimens that were otherwise identical except that they did not contain boron fibers also were prepared. In room-temperature flexural tests, the HYCARB specimens performed comparably to the control specimens; in room-temperature, open-hole compression tests, the HYCARB specimens performed slightly better, by amounts that increased with boron content.

Belvin, Harry L.↗
DOE OSTI2021

Nonlinear Matrix Approximation with Radial Basis Function Components

We introduce and investigate matrix approximation by decomposition into a sum of radial basis function (RBF) components. An RBF component is a generalization of the outer product between a pair of vectors, where an RBF function replaces the scalar multiplication between individual vector elements. Even though the RBF functions are positive definite, the summation across components is not restricted to convex combinations and allows us to compute the decomposition for any real matrix that is not necessarily symmetric or positive definite. We formulate the problem of seeking such a decomposition as an optimization problem with a nonlinear and non-convex loss function. Several modern versions of the gradient descent method, including their scalable stochastic counterparts, are used to solve this problem. We provide extensive empirical evidence of the effectiveness of the RBF decomposition and that of the gradient-based fitting algorithm. While being conceptually motivated by singular value decomposition (SVD), our proposed nonlinear counterpart outperforms SVD by drastically reducing the memory required to approximate a data matrix with the same L2 error for a wide range of matrix types. For example, it leads to 2 to 6 times memory save for Gaussian noise, graph adjacency matrices, and kernel matrices. Moreover, this proximity-based decomposition can offer additional interpretability in applications that involve, e.g., capturing the inner low-dimensional structure of the data, retaining graph connectivity structure, and preserving the acutance of images.

Rebrova, Elizaveta↗
NASA NTRS2005

Reproductive Ecology Of The Florida Scrub-Jay (Aphelocoma Coerulescens) On John F. Kennedy Space Center/Merritt Island National Wildlife Refuge: A Long-Term Study

From 1988 to 2002 we studied the breeding ecology of Florida Scrub-Jays (Aphelocoma coerulescens) on John F. Kennedy Space Center/Merritt Island National Wildlife Refuge. We examined phenology, clutch size, hatching failure rates, fledgling production, nest success, predation rates, sources egg and nestling mortality, and the effects of helpers on these measures. Nesting phenology was similar among sites. Mean clutch size at Titan was significantly larger than at HC or T4. Pairs with helpers did not produce larger clutches than pairs without helpers. Fledgling production at T4 was significantly greater than at HC and similar to Titan. Pairs with helpers at HC produced significantly more fledglings than pairs without helpers; helpers did not influence fledgling production at the other sites. Nest success at HC and Titan was low, 19% and 32% respectively. Nest success at T4 was 48% and was significantly greater than at HC. Average predation rates at all sites increased with season progression. Predation rates at all sight rose sharply by early June. The main cause of nest failure at all sites was predation, 93%.

Carter, Geoffry M.↗
NASA NTRS1994

Models of pair annihilation in 1E 1740.7-2942 and the HEAO 1 A-4 annihilation source

We study possible models of two Galactic sources of transient pair annihilation radiation, 1E 1740.7-2942 and a source observed by High Energy Astronomy Observatory (HEAO) 1 A-4. We fit the observed spectral features by thermal annihilation spectra and find that the redshifts obtained by us are much larger than those obtained from fitting Caussian lines centered on 511 keV. This effect, which is due to the net blueshift (with respect to 511 keV) of the annihilation spectrum due to the thermal energies of pairs, puts strong constraints on models of sources. We consider those constraints first without considering the mechanism of positron production. From the shape of the observed spectra, we are able to rule out both spherical clouds and layers above cold matter as possible source geometries. The observed spectra are compatible with two source geometries: (1) a nearly face-on disk in the Kerr metric and (2) a jet close to a black hole. We consider, then, the origin of the pairs. Theories of both thermal and nonthermal pair equilibria predict that photon-pair production is unable to produce annihilation features that contain as much as half of the bolometric luminosity, which is observed. A possible solution to this problem is obscuration of a nonthermal source (in which pairs are produced by photon-photon collisions) and an outflow of pairs to an unobscured region. This makes annihilation in a jet the most likely model of the considered sources.

Maciolek-Niedzwiecki, Andrzej↗
DOE OSTI2021

Reanalysis of the top-quark pair hadroproduction and a precise determination of the top-quark pole mass at the LHC *

In this study, we calculate the $t\bar{t}$ pQCD production cross-section at the NNLO and determine the top-quark pole mass from recent measurements at the LHC at the center-of-mass energy $\sqrt{S}=13$ TeV to a high precision by applying the principle of maximum conformality (PMC). The PMC provides a systematic method that rigorously eliminates QCD renormalization scale ambiguities by summing the nonconformal $\beta$ contributions into the QCD coupling constant. The PMC predictions satisfy the requirements of renormalization group invariance, including renormalization scheme independence, and the PMC scales accurately reflect the virtuality of the underlying production subprocesses. By using the PMC, an improved prediction for the $t\bar{t}$ production cross-section is obtained without scale ambiguities, which in turn provides a precise value for the top-quark pole mass. Moreover, the prediction of PMC calculations that the magnitudes of higher-order PMC predictions are well within the error bars predicted from the known lower-order has been demonstrated for the top-quark pair production. The resulting determination of the top-quark pole mass, $m_t^{\rm{pole}}=172.5\pm1.4$ GeV, from the LHC measurement at $\sqrt{S}=13$ TeV agrees with the current world average cited by the Particle Data Group (PDG). The PMC prediction provides an important high-precision test of the consistency of pQCD and the SM at $\sqrt{S}=13$ TeV with previous LHC measurements at lower CM energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Cascade decays of heavy Higgs bosons through vectorlike quarks in two Higgs doublet models

We study cascade decays of heavy neutral Higgs bosons through vectorlike quarks. We focus on scenarios where decay modes into pairs of vectorlike quarks are not kinematically open which extends the sensitivity of the LHC to larger masses. Assuming only mixing with the third family of standard model quarks the new decay modes of heavy Higgs bosons are: H → t 4 t → Wbt, Ztt, htt and H → b 4 b → Wtb, Zbb, hbb, where t 4 (b 4 ) is the new up-type (down-type) quark mass eigenstate. In the numerical analysis we assume the CP even Higgs boson in the two Higgs doublet model type-II but the signatures are relevant for many other scenarios. We identify the region of the parameter space where these decay modes are significant or can even dominate, and thus they provide the best opportunities for the simultaneous discovery of a new Higgs boson and vectorlike quarks. We further explore the reach of the High Luminosity LHC for two representative decay modes,t 4 → Zt → ℓℓt and b 4 → Zb → ℓℓb, and found that cross sections at a 0.1 fb level can be probed with simple cut based analyses. We also find that the rates for Higgs cascade decays can be much larger than the rates for a single production of vectorlike quarks. Furthermore, the reach for vectorlike quarks in Higgs cascade decays and pair production extends to comparable masses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Production, Purification, and Applications of a Potential Theranostic Pair: Cobalt-55 and Cobalt-58m

The emerging success of [68Ga/177Lu]Ga/Lu-DOTATATE as a theranostic pair has spurred interest in other isotopes as potential theranostic combinations. Here, we review cobalt-55 and cobalt-58m as a potential theranostic pair. Radionuclidically pure cobalt-55 and cobalt-58m have been produced on small cyclotrons with high molar activity. In vitro, DOTATOC labeled with cobalt has shown greater affinity for SSTR2 than DOTATOC labeled with gallium and yttrium. Similarly, [58mCo]Co-DOTATATE has shown improved cell-killing capabilities as compared to DOTATATE labeled with either indium-111 or lutetium-177. Finally, PET imaging with an isotope such as cobalt-55 allows for image acquisition at much later timepoints than gallium, allowing for an increased degree of biological clearance of non-bound radiotracer. We discuss the accelerator targetry and radiochemistry used to produce cobalt-55,58m, emphasizing the implications of these techniques to downstream radiotracers being developed for imaging and therapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Search for a new pseudoscalar decaying into a pair of bottom and antibottom quarks in top-associated production in $\sqrt{s} = 13$ TeV proton–proton collisions with the ATLAS detector

A search for a pseudoscalar a produced in association with a top-quark pair, or in association with a single top quark plus a W boson, with the pseudoscalar decaying into b-quarks $(a → b\bar{b})$, is performed using the full Run 2 data sample using a dileptonic decay mode signature. The search covers pseudoscalar boson masses between 12 and 100 GeV and involves both the kinematic regime where the decay products of the pseudoscalar are reconstructed as two standard b-tagged small-radius jets, or merged into a large-radius jet due to its Lorentz boost. No significant excess relative to expectations is observed. Assuming a branching ratio BR$(a → b\bar{b})$ = 100%, the range of pseudoscalar masses between 50 and 80 GeV is excluded at 95% confidence level for a coupling of the pseudoscalar to the top quark of 0.5, while a coupling of 1.0 is excluded at 95% confidence level for the masses considered, with the coupling defined as the strength modifier of the Standard Model Yukawa coupling.

Aad, G. [Aix-Marseille Univ., Marseille (France)] ↗
DOE OSTI2021

Measurement of differential t t ¯ production cross sections using top quarks at large transverse momenta in p p collisions at s = 13 TeV

A measurement is reported of differential top quark pair (${t\bar{t}}$) production cross sections, where top quarks are produced at large transverse momenta. The data collected with the CMS detector at the LHC are from pp collisions at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 35.9 fb$^{-1}$. The measurement uses events where at least one top quark decays as t$ \to $Wb $ \to q\bar{q}'b$ and is reconstructed as a large-radius jet with transverse momentum in excess of 400 GeV. The second top quark is required to decay either in a similar way, or leptonically, as inferred from a reconstructed electron or muon, a bottom quark jet, and a missing transverse momentum due to the undetected neutrino. The cross section is extracted as a function of kinematic variables of individual top quarks or of the ${t\bar{t}}$ system. The results are presented at the particle level, within a region of phase space close to that of the experimental acceptance, and at the parton level, and are compared to various theoretical models. In both decay channels the observed absolute cross sections are significantly lower than the predictions from theory, while the normalized differential measurements are well described.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Measurements of top-quark pair spin correlations in the $e\mu $ channel at $\sqrt{s} = 13$ TeV using $pp$ collisions in the ATLAS detector

A measurement of observables sensitive to spin correlations in $t$$\overline{t}$ production is presented, using 36.1 fb -1 of pp collision data at s√=13 TeV recorded with the ATLAS detector at the Large Hadron Collider. Differential cross-sections are measured in events with exactly one electron and one muon with opposite-sign electric charge as a function of the azimuthal opening angle and the absolute difference in pseudorapidity between the electron and muon candidates in the laboratory frame. The azimuthal opening angle is also measured as a function of the invariant mass of the $t$$\overline{t}$ system. The measured differential cross-sections are compared to predictions by several NLO Monte Carlo generators and fixed-order calculations. The observed degree of spin correlation is somewhat higher than predicted by the generators used. The data are consistent with the prediction of one of the fixed-order calculations at NLO, but agree less well with higher-order predictions. Using these leptonic observables, a search is performed for pair production of supersymmetric top squarks decaying into Standard Model top quarks and light neutralinos. Top squark masses between 170 and 230 GeV are largely excluded at the 95% confidence level for kinematically allowed values of the neutralino mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1996

An Archaea 5S rRNA analog is stably expressed in Escherichia coli

Mini-genes for 5S-like rRNA were constructed. These genes had a sequence which largely resembles that of the naturally occurring 5S rRNA of a bacterium, Halococcus morrhuae, which phylogenetically belongs to the Archaea. Plasmids carrying the mini-genes were transformed into Escherichia coli (Ec). Ribosomal incorporation was not a prerequisite for stable accumulation of the RNA product. However, only those constructs with a well-base-paired helix I accumulated RNA product. This result strongly implies that this aspect of the structure is likely to be an important condition for stabilizing 5S rRNA-like products. The results are consistent with our current understanding of 5S rRNA processing in Ec. When used in conjunction with rRNA probe technology, the resulting chimeric RNA may be useful as a monitoring tool for genetically engineered microorganisms or naturally occurring organisms that are released into the environment.

Non-NASA Center↗
DOE OSTI2025

Search for $t\bar{t}H/A \rightarrow t\bar{t}t\bar{t}$ production in proton–proton collisions at $\sqrt{s}=13$ $\text {TeV}$ with the ATLAS detector

A search is presented for a heavy scalar (H) or pseudo-scalar (A) predicted by the two-Higgs-doublet models, where the H/A is produced in association with a top-quark pair $(t\bar{t}H/A),$ and with the H/A decaying into a $t\bar{t}$ pair. The full LHC Run 2 proton–proton collision data collected by the ATLAS experiment is used, corresponding to an integrated luminosity of $139~\text {fb}^{-1}.$ Events are selected requiring exactly one or two opposite-charge electrons or muons. Data-driven corrections are applied to improve the modelling of the $t\bar{t}$ +jets background in the regime with high jet and b-jet multiplicities. These include a novel multi-dimensional kinematic reweighting based on a neural network trained using data and simulations. An H/A-mass parameterised graph neural network is trained to optimise the signal-to-background discrimination. In combination with the previous search performed by the ATLAS Collaboration in the multilepton final state, the observed upper limits on the $t\bar{t}H/A \rightarrow t\bar{t}t\bar{t}$ production cross-section at 95% confidence level range between 14 fb and 5.0 fb for an H/A with mass between 400 GeV and 1000 GeV , respectively. Assuming that both the H and A contribute to the $t\bar{t}t\bar{t}$ cross-section, tan β values below 1.7 or 0.7 are excluded for a mass of 400 GeV or 1000 GeV , respectively. The results are also used to constrain a model predicting the pair production of a colour-octet scalar, with the scalar decaying into a $t\bar{t}$ pair.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Measurement of $t\overline{t}$ production in association with additional b -jets in the eμ final state in proton–proton collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

This paper presents measurements of top-antitop quark pair ($t\overline{t}$) production in association with additional b-jets. The analysis utilises 140 fb -1 of proton–proton collision data collected with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 13 TeV. Fiducial cross-sections are extracted in a final state featuring one electron and one muon, with at least three or four b-jets. Results are presented at the particle level for both integrated cross-sections and normalised differential cross-sections, as functions of global event properties, jet kinematics, and b-jet pair properties. Observable quantities characterising b-jets originating from the top quark decay and additional b-jets are also measured at the particle level, after correcting for detector effects. The measured integrated fiducial cross sections are consistent with $t\overline{t}$$b\overline{b}$ predictions from various next-to-leading-order matrix element calculations matched to a parton shower within the uncertainties of the predictions. State of-the-art theoretical predictions are compared with the differential measurements; none of them simultaneously describes all observables. Differences between any two predictions are smaller than the measurement uncertainties for most observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗