Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “packaging materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.

36 MATERIALS SCIENCE↗

Technical Basis for Extending Storage Life of DOE-STD-3013 Containers

The U.S. Department of Energy (DOE) Technical Standard for Stabilization, Packaging, and Storage of Plutonium-Bearing Materials, DOE-STD-3013 [USDOE 2018], provides requirements for packaging stabilized metals, alloys, and oxides containing at least 30 weight percent (wt%) plutonium (Pu) plus uranium for storage for up to 50 years. This document provides the technical basis for extending that storage duration to up to 100 years for metals and alloys, and oxides that do not present a corrosion risk to the integrity of the container.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Savannah River Site Eastern Transportation Hub: A Concept For a DOE Eastern Packaging, Staging and Maintenance Center - 13143

The Department of Energy (DOE) is working to de-inventory sites and consolidate hazardous materials for processing and disposal. The DOE administers a wide range of certified shipping packages for the transport of hazardous materials to include Special Nuclear Material (SNM), radioactive materials, sealed sources and radioactive wastes. A critical element to successful and safe transportation of these materials is the availability of certified shipping packages. There are over seven thousand certified packagings (i.e., Type B/Type AF) utilized within the DOE for current missions. The synergistic effects of consolidated maintenance, refurbishment, testing, certification, and costing of these services would allow for efficient management of the packagings inventory and to support anticipated future in-commerce shipping needs. The Savannah River Site (SRS) receives and ships radioactive materials (including SNM) and waste on a regular basis for critical missions such as consolidated storage, stabilization, purification, or disposition using H-Canyon and HB-Line. The Savannah River National Laboratory (SRNL) has the technical capability and equipment for all aspects of packaging management. SRS has the only active material processing facility in the DOE complex and is one of the sites of choice for nuclear material consolidation. SRS is a logical location to perform maintenance and periodic testing of the DOE fleet of certified packagings. This initiative envisions a DOE Eastern Packaging Staging and Maintenance Center (PSMC) at the SRS and a western hub at the Nevada National Security Site (NNSS), an active DOE Regional Disposal Site. The PSMC's would be the first place DOE would go to meet their radioactive packaging needs and the primary locations projects would go to disposition excess packaging for beneficial reuse. These two hubs would provide the centralized management of a packaging fleet rather than the current approach to design, procure, maintain and dispose of packagings on a project-by-project basis. This initiative provides significant savings in packaging costs and acceleration of project schedules. In addition to certified packaging, the PSMC would be well suited for select designs of 7A Type A packaging and Industrial Packaging. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

AGING PERFORMANCE OF MODEL 9975 PACKAGE FLUOROELASTOMER O-RINGS

The influence of temperature and radiation on Viton{reg_sign} GLT and GLT-S fluoroelastomer O-rings is an ongoing research focus at the Savannah River National Laboratory. The O-rings are credited for leaktight containment in the Model 9975 shipping package used for transportation of plutonium-bearing materials. At the Savannah River Site, the Model 9975 packages are being used for interim storage. Primary research efforts have focused on surveillance of O-rings from actual packages, leak testing of seals at bounding aging conditions and the effect of aging temperature on compression stress relaxation behavior, with the goal of service life prediction for long-term storage conditions. Recently, an additional effort to evaluate the effect of aging temperature on the oxidation of the materials has begun. Degradation in the mechanical properties of elastomers is directly related to the oxidation of the polymer. Sensitive measurements of the oxidation rate can be performed in a more timely manner than waiting for a measurable change in mechanical properties, especially at service temperatures. Measuring the oxidation rate therefore provides a means to validate the assumption that the degradation mechanisms(s) do not change from the elevated temperatures used for accelerated aging and the lower service temperatures. Monitoring the amount of oxygen uptake by the material over time at various temperatures can provide increased confidence in lifetime predictions. Preliminary oxygen consumption analysis of a Viton GLT-based fluoroelastomer compound (Parker V0835-75) using an Oxzilla II differential oxygen analyzer in the temperature range of 40-120 C was performed. Early data suggests oxygen consumption rates may level off within the first 100,000 hours (10-12 years) at 40 C and that sharp changes in the degradation mechanism (stress-relaxation) are not expected over the temperature range examined. This is consistent with the known long-term heat aging resistance of fluoroelastomers relative to hydrocarbon-based elastomers, and in absence of antioxidants that may be consumed over time. Additional experimental effort will be undertaken in the short term range within the first 100 hours of thermal aging to capture further details of the oxygen consumption rate.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Proposed Path Forward for Transportation of High-Assay Low-Enriched Uranium

Many of the advanced reactors that are being designed will use high-assay low-enriched uranium (HALEU) as the reactor fuel. HALEU is fuel that is enriched between 5% – 20% uranium-235. With the change to higher enriched material, the industry will have new challenges with the development and regulatory approval of enrichment and fuel fabrication facilities and suitable transportation packages to support the economic use of HALEU materials. One area of concern relates to ensure sub-criticality of the material during transportation as identified by the Nuclear Energy Institute (NEI). To evaluate the relevant work, experts, and industry perspectives on HALEU, a workshop was organized to share relevant experience and insights into HALEU transportation, handling, and management. At the August 30 and 31, 2018 workshop, NEI and industry provided the following recommendations to DOE and the national lab complex. 1. DOE and the lab complex should communicate and educate the Nuclear Regulatory Commission (NRC) on criticality issues related to HALEU. 2. Idaho National Laboratory (INL) should support work needed to certify package design for the transportation of HALEU. a. Suggest amending the Certificate of Compliance of an existing package used for the shipment of commercial quantities. b. Suggest DOE provide funding to package designer(s) for analysis and engineering work for a package to be submitted to NRC for approval. 3. INL should provide specific, or a range, of the expected impurities that will be present in recycled naval fuel. 4. In the longer term, DOE and the lab complex should increase the availability of criticality benchmark data to further reduce conservatism in package design. In addition, a couple key takeaways were identified, including: 1. Although the labs can provide additional criticality experiments, industry has enough data to license facilities, overpacks, and cylinders. Validation from additional critical experiments to establish less uncertainty in the benchmarks will be helpful. 2. A collective effort from industry is needed to express consistency on how much information exists or is needed related to criticality. Based on interactions with industry, DOE, and national laboratories, it appears that large-volume transportation of fresh HALEU appears feasible from a criticality perspective. Specifically, an initial review of applicable criticality benchmark experiments identified numerous applicable experiments. However, a more thorough review of a realistic transportation package design is suggested. Therefore, the following next steps are proposed: 1. Evaluate a large volume package with uranium dioxide enriched to 20%. Specifically, the GNF-A NPC package was proposed as a potentially viable option. 2. Based on the results of (1), determine if additional package designs and fuel material should be evaluated. 3. Based on the results of (1), determine if additional criticality experiments would be beneficial to improve the margins for criticality due to uncertainties. 4. Determine DOE transportation needs (packages sizes, shielding requirements, handling/operational requirements, and timing of availability) related to HALEU. 5. Continue to interface with NEI and interested industry companies to determine the appropriate time to engage the NRC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status and Trend of Automotive Power Packaging

Comprehensive requirements in aspects of cost, reliability, efficiency, form factor, weight, and volume for power electronics modules in modern electric drive vehicles have driven the development of automotive power packaging technology intensively. Innovation in materials, interconnections, and processing techniques is leading to enormous improvements in power modules. In this paper, the technical development of and trends in power module packaging are evaluated by examining technical details with examples of industrial products. The issues and development directions for future automotive power module packaging are also discussed.

33 ADVANCED PROPULSION SYSTEMS↗

Understanding the consequences of hypothetical post-closure transient criticality in a geological disposal facility - 14439

Radioactive Waste Management (RWM) is responsible for implementing geological disposal of the UK's higher-activity radioactive wastes. These wastes include significant quantities of fissile nuclides and, therefore, demonstration of criticality safety for the wastes under disposal conditions forms an important component of RWM's disposal system safety case. At the time of disposal all waste packages will be safely sub-critical. Containment provided by the engineered barrier system of a geological disposal facility (GDF) will ensure that criticality is not possible for some time after disposal. However, as waste packages degrade, fissile and other materials may be mobilised, which could affect the potential for criticality. Although the likelihood of a critical configuration developing is demonstrably low, it cannot be assumed to be zero over long post-closure timescales. The UK environment agencies' Guidance on Requirements for Authorisation for a GDF includes a specific requirement to consider the consequences of hypothetical 'what-if' post-closure criticality. RWM has undertaken a programme of research to model and understand the consequences of hypothetical post-closure criticality events. Initially focused on the scenario of fissile material relocation and accumulation following intermediate level waste (ILW) disposal, two bespoke computer models were developed. The quasi-steady-state (QSS) model considered critical systems maintained by accumulation of fissile materials where the temperature feedback remains negative throughout the transient. The rapid transient model (RTM) considered systems with positive temperature feedback. The QSS model development included a successful comparison with the Oklo natural reactors. With a requirement to consider post-closure criticality for a wider range of potential waste types under different illustrative disposal concepts, the initial transient criticality models had some limitations. For the QSS model this was the assumption of fixed geometry, while the complex functional inputs required in the RTM were not readily available for different materials. For the QSS model this paper describes the model development to allow changing volume; this has enabled its application to 'what-if' scenarios of flooding within a spent fuel waste package and the slumping of a stack of ILW packages. For rapid transient criticality this paper explains how the development of a simpler 'bounding approach' model to complement the RTM has enabled transient criticality analysis for a wider range of host materials. The role of this research in demonstrating post-closure criticality safety of a GDF in the UK is presented in a companion paper which also draws on the results of a parallel research project to demonstrate that the likelihood of post-closure criticality is low. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NY TBO Research: Integrated Demand Management (IDM): IDM Concept, Tools, and Training Package

A series of human-in-the-loop simulation sessions were conducted in the Airspace Operations Laboratory (AOL) to evaluate a new traffic management concept called Integrated Demand Management (IDM). The simulation explored how to address chronic equity, throughput and delay issues associated with New Yorks high-volume airports by operationally integrating three current and NextGen capabilities the Collaborative Trajectory Options Program (CTOP), Time-Based Flow Management (TBFM) and Required Time of Arrival (RTA) in order to better manage traffic demand within the National Air Traffic System. A package of presentation slides was developed to describe the concept, tools, and training materials used in the simulation sessions. The package will be used to outbrief our stakeholders by both presenting orally and disseminating of the materials via email.

trajectory-based operations↗

MODEL 9975 LIFE EXTENSION PACKAGE 1 - FINAL REPORT

Life extension package LE1 (9975-03382) was instrumented and subjected to a temperature/humidity environment that bounds KAMS package storage conditions for 92 weeks. During this time, the maximum fiberboard temperature was {approx}180 F, and was established by a combination of internal heat (12 watts) and external heat ({approx}142 F). The relative humidity external to the package was maintained at 80 %RH. This package was removed from test in November 2010 after several degraded conditions were observed during a periodic examination. These conditions included degraded fiberboard (easily broken, bottom layer stuck to the drum), corrosion of the drum, and separation of the air shield from the upper fiberboard assembly. Several tests and parameters were used to characterize the package components. Results from these tests generally indicate agreement between this full-scale shipping package and small-scale laboratory tests on fiberboard and O-ring samples. These areas of agreement include the rate of fiberboard weight loss, change in fiberboard thermal conductivity, fiberboard compression strength, and O-ring compression set. In addition, this package provides an example of the extent to which moisture within the fiberboard can redistribute in the presence of a temperature gradient such as might be created by a 12 watt internal heat load. Much of the moisture near the fiberboard ID surface migrated towards the OD surface, but there was not a significant axial moisture gradient during most of the test duration. Only during the last inspection period (i.e. after 92 weeks exposure during the second phase) did enough moisture migrate to the bottom fiberboard layers to cause saturation. A side effect of moisture migration is the leaching of soluble compounds from the fiberboard. In particular, the corrosion observed on the drum appears related primarily to the leaching and concentration of chlorides. In most locations, this attack appears to be general corrosion, with shallow attack of the drum surface. The primary areas susceptible to corrosion are weld/heat-affected zones. However, one corrosion location not immediately associated with a weld was tested for, and confirmed as having, throughwall penetration. An increase in the axial gap at the top of the package is also related to the migration of moisture within the fiberboard. As moisture redistributes within the package, a majority of the fiberboard loses moisture (on average) and shrinks axially. In addition, an increased moisture content of the bottom fiberboard layers locally reduces its compression strength, leading to compaction of those layers under the weight of the package internal components. In addition to these moisture-driven phenomena, the fiberboard will shrink due to slow pyrolysis in an elevated temperature/humidity environment. Under the collective influence of these effects, the axial gap in the LE1 package increased from an initial value of 0.58 inch and exceeded the 1 inch (maximum) criterion after approximately 18 weeks conditioning. The axial gap eventually reached 1.86 inches. Despite the degradation seen in several of the package components (drum, fiberboard, shield and O-rings), the package appears to have retained sufficient integrity to meet the functional requirements for storage in KAMS. This demonstrates a degree of robustness in the package design relative to the storage environment.

42 ENGINEERING↗

Determing Degradation Of Fiberboard In The 9975 Shipping Package By Measuring Axial Gap

Currently, thousands of model 9975 transportation packages are in use by the US Department of Energy (DOE); the design of which has been certified by DOE for shipment of Type B radioactive and fissile materials in accordance with Part 71, Title 10 Code of Federal Regulations (CFR), or 10 CFR 71, Packaging and Transportation of Radioactive Material. These transportation packages are also approved for the storage of DOE-STD-3013 containers at the Savannah River Site (SRS). As such, the 9975 has been continuously exposed to the service environment for a period of time greater than the approved transportation service life. In order to ensure the material integrity as specified in the safety basis, an extensive surveillance program is in place in K-Area Complex (KAC) to monitor the structural and thermal properties of the fiberboard of the 9975 shipping packages. The surveillance approach uses a combination of Non-Destructive Examination (NDE) field surveillance and Destructive Examination (DE) lab testing to validate the 9975 performance assumptions. The fiberboard in the 9975 is credited with thermal insulation, criticality control and resistance to crushing. During surveillance monitoring in KAC, an increased axial gap of the fiberboard was discovered on selected items packaged at Rocky Flats Environmental Technology Site (RFETS). Many of these packages were later found to contain excess moisture. Savannah River National Laboratory (SRNL) testing has resulted in a better understanding of the relationship between the fiberboard moisture level and compaction of the fiberboard under storage conditions and during transport. In laboratory testing, the higher moisture content has been shown to correspond to higher total compaction of fiberboard material and compaction rate. The fiberboard height is reduced by compression of the layers. This change is observed directly in the axial gap between the flange and the air shield. The axial gap measurement is made during the pre-use inspection or during the annual recertification process and is a screening measurement for changes in the fiberboard.

42 ENGINEERING↗

Characterize traction–separation relation and interfacial imperfections by data-driven machine learning models

Abstract Interfacial mechanical properties are important in composite materials and their applications, including vehicle structures, soft robotics, and aerospace. Determination of traction–separation (T–S) relations at interfaces in composites can lead to evaluations of structural reliability, mechanical robustness, and failures criteria. Accurate measurements on T–S relations remain challenging, since the interface interaction generally happens at microscale. With the emergence of machine learning (ML), data-driven model becomes an efficient method to predict the interfacial behaviors of composite materials and establish their mechanical models. Here, we combine ML, finite element analysis (FEA), and empirical experiments to develop data-driven models that characterize interfacial mechanical properties precisely. Specifically, eXtreme Gradient Boosting (XGBoost) multi-output regressions and classifier models are harnessed to investigate T–S relations and identify the imperfection locations at interface, respectively. The ML models are trained by macroscale force–displacement curves, which can be obtained from FEA and standard mechanical tests. The results show accurate predictions of T–S relations ( R 2 = 0.988) and identification of imperfection locations with 81% accuracy. Our models are experimentally validated by 3D printed double cantilever beam specimens from different materials. Furthermore, we provide a code package containing trained ML models, allowing other researchers to establish T–S relations for different material interfaces.

97 MATHEMATICS AND COMPUTING↗

Aeroflex Technology as Class-Y Demonstrator

Modern space field programmable gate array (FPGA) devices with increased functional density and operational frequency, such as Xilinx Virtex 4 (V4) and S (V5), are packaged in non-hermetic ceramic flip chip forms. These next generation space parts were not qualified to the MIL-PRF-38535 Qualified Manufacturer Listing (QML) class-V when they were released because class-V was only intended for hermetic parts. In order to bring Xilinx V5 type packages into the QML system, it was suggested that class-Y be set up as a new category. From 2010 through 2014, a JEDEC G12 task group developed screening and qualification requirements for Class-Y products. The Document Standardization Division of the Defense Logistics Agency (DLA) has completed an engineering practice study. In parallel with the class-Y efforts, the NASA Electronic Parts and Packaging (NEPP) program has funded JPL to study potential reliability issues of the class-Y products. The major hurdle of this task was the absence of adequate research samples. Figure 1-1 shows schematic diagrams of typical structures of class-Y type products. Typically, class-Y products are either in ceramic flip chip column grid array (CGA) or land grid array (LGA) form. In class-Y packages, underfill and heat spread adhesive materials are directly exposed to the spacecraft environment due to their non-hermeticity. One of the concerns originally raised was that the underfill material could degrade due to the spacecraft environment and negatively impact the reliability of the package. In order to study such issues, it was necessary to use ceramic daisy chain flip chip package samples so that continuity of flip chip solder bumps could be monitored during the reliability tests. However, none of the commercially available class-Y daisy chain parts had electrical connections through flip chip solder bumps; only solder columns were daisy chained, which made it impossible to test continuity of flip chip solder bumps without using extremely costly functional parts. Among space parts manufacturers who were interested in producing class-Y products, Aeroflex Microelectronic Solutions-HiRel had been developing assembly processes using their internal R&D classy type samples. In early 2012, JPL and Aeroflex initiated a collaboration to study reliability of the Aeroflex technology as a class-Y demonstrator.

Suh, Jong-ook↗

Transportation Package Seal Performance in Beyond Design Basis Thermal Exposures - 12472

The Nuclear Regulatory Commission (NRC) technical report, NUREG/CR-6886, 'Spent Fuel Transportation Package Response to the Baltimore Tunnel Fire Scenario', describes, in detail, an evaluation of the potential for a theoretical release of radioactive material from three different spent nuclear fuel (SNF) transportation packages, had they been exposed to the Baltimore tunnel fire that occurred in July of 2001. This evaluation determined the temperatures of various components of the packages, including the seals, using temperatures resulting from models of the Baltimore tunnel fire (as boundary conditions) and finite element models of the SNF packages. For two of the packages evaluated, the analyses indicated that the seals used would have exceeded their continuous-use rated service temperatures, meaning the release of radioactive material could not be ruled out with available information; However, for both of the packages evaluated, the analysis determined, by a bounding calculation, that the maximum potential release was well below the regulatory requirements for releases from a SNF package during the hypothetical accident condition (HAC) sequence of events in 10CFR Part 71. The NRC is investigating the performance of seals in SNF transportation packages exposed to fires that could exceed the HAC fire described in 10CFR Part 71, such as the Baltimore Tunnel Fire that occurred in 2001. The performance of package seals is important for determining the potential release of radioactive material from a package during a beyond-design-basis accident. The seals have lower temperature limits than other package components and are the containment barrier between the environment and the cask contents. The NRC Office of Nuclear Regulatory Research contracted the National Institute of Standards and Technology (NIST) to conduct small-scale thermal testing to obtain experimental data of the performance of seals during extreme temperature exposures. The experimental testing consisted of several small-scale pressure vessels fabricated with a modified ASME flange design and tested metallic and elastomeric seals, similar to those that might be used on an actual SNF transportation package. The vessels were heated in an electrical oven to temperatures as high as 800 deg. C (1472 deg. F), exceeding the rated temperatures of the seals in question. This paper will provide a summary of the testing conducted and present test results and conclusions. Fifteen metallic and elastomeric seal performance tests including two shakedowns were performed under beyond-design-basis thermal exposure conditions; twelve tests used metallic seals, two used ethylene-propylene seals, and one used a Teflon seal. Of the five repeat metallic-seal tests (Tests No.2, 3, 4, 8, and 9), leakage (decreasing vessel pressure) was observed in three of the tests (Tests No.3, 4, and 8) during the 9 h 800 deg. C (1472 deg. F) exposure. The times when the leakage occurred (the vessel pressure started to decrease) varied in the three tests performed. The two shakedown tests were conducted using a 30 min and 4 h exposure to 800 deg. C (1472 deg. F), respectively, and the seal appeared to hold vessel pressure. No leakage (unchanged vessel pressure within the pressure measurement uncertainty) was also observed in the two metallic seal tests that used 100 deg. C incremental heating from 427 deg. C (800 deg. F) to 627 deg. C (1160 deg. F) and from 427 deg. C (800 deg. F) to 727 deg. C (1340 deg. F), respectively, with at least 9 h exposure to each temperature increment. Three repeat metallic seal tests were also conducted at the seal maximum operating temperature of 427 deg. C (800 deg. F) for 9 h. The seal maintained vessel pressure within the measurement of the pressure transducer in all three tests. No leakage was observed in one ethylene-propylene seal tested at 300 deg. C (572 deg. F) for more than 20 hours; however, leakage was found in another ethylene-propylene seal tested at 450 deg. C (842 deg. F) for more than 20 hours (Test No.15). Leakage was also observed in the test (Test No.12) that used a TFE seal subject to 300 deg. C (572 deg. F) exposure. In these fifteen tests the temperature and time exposure variables were changed to map the performance of the metallic and polymeric seals at elevated temperatures beyond the rated operating temperatures. Both the metallic and polymeric seals were able to hold pressure even after leaks were detected and no catastrophic seal failure (i.e., a rapid release of pressure to atmospheric) occurred. Further testing on the polymeric seals would need to be performed to confirm the results in these tests.(authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The NAC-SMP - a Next Generation Transformation Package - 18391

NAC International Inc. (NAC) is developing a Small Multi-Purpose (SMP) Type B(U)F-96 transportation cask designed with flexibility and cost-efficiency objectives to support shipment of a wide range of wastes with fissile material contents. The NAC-SMP package is a small, modular design that meets US DOT weight limits for road transport. Contents can be accommodated in multiple configurations including standard drums of up to 416 liters (110 U.S. gallons) in capacity. The package will also accommodate unique waste contents and fuel designs where cost-effective packaging options have been a challenge. The NAC-SMP development goals include simplicity of design and operational flexibility to meet Type B requirements. In particular, the cask body is designed to satisfy the dimensional and mass constraints, shielding requirements, and general transport requirements for a variety of contents under 10 CFR 71 and IAEA SSR-6 regulations. Flexibility is assured by the cask's modular design, which consists of multiple vessels to provide containment, shielding and overpack capability. The containment boundary design permits adaptability to content requirements by relying on interchangeable internal components for secondary containment, supplemental shielding and shoring, as required. In this paper, NAC provides an overview of the NAC-SMP cask and identifies the design features and technology advancements that makes the cask a readily adaptable and flexible solution for packaging US DOE and other orphan wastes, and to enable the integration of these wastes into the waste management system process and disposition infrastructure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Data and scripts associated with a manuscript modeling microbial regulation of priming effects

This data package is associated with the publication “Modeling Microbial Regulatory Feedback in Organic Matter Decomposition Identifies Copiotrophic Traits as Key Drivers of Positive Priming” published as a preprint on BioRXiv by Ahamed et al. (2026); https://doi.org/10.1101/2024.08.11.607483. The package contains MATLAB scripts and saved simulation outputs used to implement a cybernetic model of microbial regulation during complex organic matter (OM) decomposition governing priming effects. It includes models of (i) single microbial functional groups (copiotrophic or oligotrophic degraders) and (ii) binary consortia composed of degraders and non-degraders with contrasting or common growth traits. Simulation results were generated using Monte Carlo analyses, with randomized key model parameters across a range of environmental mixing fractions of complex and labile OM. The dataset was created to provide a transparent and reusable computational framework for systematically exploring how microbial growth traits, metabolic regulation, and community composition influence OM decomposition dynamics and priming effects. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes the variable definitions. This package includes: (1) annotated MATLAB code implementing the system of ordinary differential equations and cybernetic control laws; (2) saved output files containing data (e.g., biomass, substrates, enzyme levels, priming metrics); and (3) scripts for processing saved outputs and regenerating figures. Specifically, the data package contains three main MATLAB scripts: runPrimingModel.m, runPlotData.m, and runPlotSuppFigS1.m, along with this readme and supporting documentation. Users should begin with runPrimingModel.m, which contains the annotated code implementing the system of ordinary differential equations and cybernetic control laws. This script runs the Monte Carlo simulations of microbial OM decomposition and allows users to modify microbial trait definitions, adjust parameter distributions, or define new community configurations. Simulation outputs are automatically saved as .mat files in the folder named SavedData, which stores all pre-generated results included in this package. The second script, runPlotData.m, reads files from the SavedData folder and processes them to regenerate the figures presented in the manuscript. The third script, runPlotSuppFigS1.m, specifically generates Figure S1 in the Supplementary Material of the manuscript. The package also includes the aforementioned files in non-proprietary .txt format. If users intend to use them, they should first save the files in their respective .m or .mat formats prior to execution in MATLAB.

Biomass concentration↗

Optimization of a Solver for Computational Materials and Structures Problems on NVIDIA Volta and AMD Instinct GPUs

The Scalable Implementation of Finite Elements by NASA (ScIFEN) is a software package developed to solve complex computational materials and structures problems using the finite element method (FEM). In this paper, we describe optimization techniques to speed up the linear solver computation that occurs within the ScIFEN application. We consider GPUs from two different vendors, NVIDIA and AMD as our target platforms for optimization and highlight differences in performance and optimization techniques. The NVIDIA GPU Volta V100 is used in the Summit system deployed at Oak Ridge National Laboratory, and the new exascale system, Frontier, will be using AMD Radeon Instinct GPU. We evaluated the performance of various optimization techniques on test matrices, ranging in size from100K to 4M, that are representative of ScIFEN applications. The linear solver computation is memory-bound on both GPUs. Our experiments show that on the NVIDIA GPU we obtained up to79%of the theoretical peak bandwidth, while the AMD GPU achieved 59%. Overall, the NVIDIA V100 GPU outperforms the AMD MI 25 GPU1. We observed an overall speedup of up to37X on an NVIDIA V100 compared to an Intel Skylake 12-coremachine. The solver for a 4M degree of freedom system took under 2.5 seconds.

Mohammad Zubair↗

Determination of Bag-out Material Packing Fraction [Slides]

This report presents different packaging procedures and calculations. The objective is to determine the packing fraction (vol.%) of realistically-packed cannisters containing bagout materials to be used for H 2 evolution calculations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SHIPMENT OF TWO DOE-STD-3013 CONTAINERS IN A 9977 TYPE B PACKAGE

The 9977 is a certified Type B Packaging authorized to ship uranium and plutonium in metal and oxide forms. Historically, the standard container for these materials has been the DOE-STD-3013 which was specifically designed for the long term storage of plutonium bearing materials. The Department of Energy has used the 9975 Packaging containing a single 3013 container for the transportation and storage of these materials. In order to reduce container, shipping, and storage costs, the 9977 Packaging is being certified for transportation and storage of two 3013 containers. The challenges and risks of this content and the 9977s ability to meet the Code of Federal Regulations for the transport of these materials are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗