Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “normal stars”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

The diffuse interstellar feature at 4430 A and interstellar extinction in the far-ultraviolet

IUE measurements have been obtained for the UV extinction characteristics of 20 reddened stars previously reported to have anomalously high or low A(4430)/E(B-V) ratios, in order to conduct a first statistical study of the correlations between these ratios and interstellar extinction features in the UV. A marginally significant positive correlation is noted between A(4430)/E(B-V) and the normalized strength of the 2175 A extinction jump, but no correlation is found with the total extinction at the wavelength and a marginally negative correlation is found with the extinction rise at 1250 A. The hypothesis that 4430 A diffuse absorption is produced by very small interstellar grains is not supported by the present observations.

Witt, A. N.↗

The 60 micron to 20 centimeter infrared-to-radio ratio within spiral galaxies

A detailed comparison is presented of the distribution of 60 micron IR and 20 cm radio continuum emission within 25 galaxies, mostly disk spirals. Local maxima in the thermal IR and nonthermal radio emission are found to be spatially coincident on scales of less than about 0.4 kpc in the nearest sample galaxies. The IR-red disk in normal spirals appears to be characterized by a shorter scale length than that of the radio continuum disk, suggesting that the IR-to-radio ratio should decrease as a function of radius. A model that successfully accounts for the observations is introduced which is based on the assumptions of steady-state star formation activity within the disk on kpc scales and a tight coupling between the origins of the dust-heating radiation and the radio-emitting cosmic-ray electrons. The underlying source is described as an exponential disk. The results also suggest that a random walk process cannot by itself describe the temporal evolution of cosmic rays.

Bicay, M. D.↗

Magnetars: Challenging the Extremes of Nature

Magnetars are magnetically powered rotating neutron stars with extreme magnetic fields (over 10(exp 14) Gauss). They are discovered and emit predominantly in the X- and gamma-rays. Very few sources (roughly 15) have been found since their discovery in 1987. NASA s Fermi Observatory was launched June 11, 2009; the Fermi Gamma Ray Burst Monitor (GBM) began normal operations on July 14, about a month after launch, when the trigger algorithms were enabled. Since then, we recorded emission from four magnetar sources; of these, only one was an old magnetar: SGR 1806+20. The other three detections were two brand new sources, SGR J0501+4516, discovered with Swift and extensively monitored with both Swift and GBM, SGR J0418+5729, discovered with GBM and the Interplanetary Network (IPN), and SGR J1550-5418, a source originally classified as an Anomalous X-ray Pulsar (AXP 1E1547.0-5408). In my talk I will give a short history of the discovery of magnetars and describe how this, once relatively esoteric field, has emerged as a link between several astrophysical areas including Gamma-Ray Bursts. Finally, I will describe the properties of these sources and the current status of our knowledge of the magnetar population and birth rate.

Kouveliotou, Chryssa↗

[Presentation Slides] Code-to-Code Benchmark Study for Thermal Stress Modeling and Preliminary Analysis of the High-temperature Single Heat-Pipe Experiment

In the heat-pipe-cooled microreactor, heat pipes remove heat from the reactor core as a passive heat-transfer device, so the fluid circulation is not required for cooling, which can substantially simplify the overall reactor design. However, given the extremely high temperatures in the core region and potentially large temperature gradients across the structure materials, thermal stresses need to be well-analyzed to ensure structural integrity during normal operations and accident scenarios. This presentation slides discuss finite element method-based thermal-stress analysis for the high-temperature single heat-pipe test article in the Single Primary Heat Extraction and Removal Emulator (SPHERE) facility at Idaho National Laboratory (INL), using two commercial software packages, Abaqus and Star-CCM+. A code-to-code benchmark study was performed to crosscheck the model setup and capability of each code and to gain preliminary insights into the potential thermal stress concerns from the current experimental setup. It is observed the significant thermal stresses happen at the inner surface of the heat pipe hole surrounded by electric heaters where the largest temperature gradients appear. The temperature fields have good agreements between Abaqus and Star-CCM+, while the induced thermal stresses show modest deviations probably due to differences of meshing engines used in these two codes. It is found that the local maximum thermal stresses may reach close to the ultimate tensile strength and yield strength of structural material depending on the heater power. Ultimately, the coupled thermal-structural analysis will help guide the current experimental plan and ensure the facility safety for future experimental study.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Pronghorn Porous Media Model Validation with Pressure Drop Measurements

The verification and validation (V&V) of Pronghorn is imperative to assert its accuracy when predicting the fluid velocity, temperature, and pressure in high temperature gas-cooled reactors. Pronghorn is a coarse-mesh, intermediate-fidelity, and multidimensional thermal-hydraulics (TH) code developed by the Idaho National Laboratory (INL). New pebble bed experiments are used to observe the details of the fluid motion and pressure drop in the porous bed under the reactor normal operation. This paper focuses on the validation of the Pronghorn compressible and incompressible Navier-Stokes equations using the pressure drop measurements performed at the engineering-scale pebble bed facility at the Texas A&M university (TAMU). Various pressure drop correlations and porosity functions are implemented in both Pronghorn and STAR-CCM+ to compare the pressure drop due to the combined viscous and inertial resistances in the porous bed. The correlations accounting for the near-wall effect are also utilized to observe if the pressure drop estimates can be improved. Pronghorn porous media models predict the pressure drop well relative to the STAR-CCM+ simulation results and 1D correlations, and both the finite element method (FEM) and finite volume method (FVM) perform accurately. Pronghorn models are also validated with the experimental measurements given the different Reynolds number ranges and specific aspect ratios. The likelihood of the statistical significance between the pressure drop measurements and specific correlations or simulations is low provided that the overlap of their confidence intervals is more than the half of a single arm. Several validation metrics are reasonable in regard to the similar studies from other literature. The precise average pebble bed porosity estimation has much impact on the pressure drop, and the Foumeny and Montillet (dense packing) models carry out the accurate pressure drop prediction by considering the near-wall effect.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Extremely Overdoped Superconducting Cuprates via High Pressure Oxygenation Methods

Within the cuprate constellation, one fixed star has been the superconducting dome in the quantum phase diagram of transition temperature vs. the excess charge on the Cu in the CuO2-planes, p, resulting from O-doping or cation substitution. However, a more extensive search of the literature shows that the loss of the superconductivity in favor of a normal Fermi liquid on the overdoped side should not be assumed. Many experimental results from cuprates prepared by high-pressure oxygenation show Tc converging to a fixed value or continuing to slowly increase past the upper limit of the dome of p = 0.26–0.27, up to the maximum amounts of excess oxygen corresponding to p values of 0.3 to > 0.6. These reports have been met with disinterest or disregard. Our review shows that dome-breaking trends for Tc are, in fact, the result of careful, accurate experimental work on a large number of compounds. This behavior most likely mandates a revision of the theoretical basis for high-temperature superconductivity. That excess O atoms located in specific, metastable sites in the crystal, attainable only with extreme O chemical activity under HPO conditions, cause such a radical extension of the superconductivity points to a much more substantial role for the lattice in terms of internal chemistry and bonding.

Sederholm, Linda (ORCID:0000000172090509)↗

X-ray properties of bright far-infrared galaxies

The Einstein IPC was searched for observations of galaxies in the IRAS BCS. Of the 324 galaxies in this sample, 81 were observed with the IPC, and 51 were detected at a confidence level greater than 3-sigma. A strong correlation was found to exist between the FIR and X-ray luminosities among the normal and starburst (NSB) galaxies with LX varies as Lfir exp 0.90-1.01 (90-percent confidence limits). The X-ray luminosity of the 10 Seyfert galaxies in this sample is a factor of approximately 10 greater than the NSB galaxies with the same FIR luminosity. The efficiency of X-ray production through star formation is found to be nearly independent of the star formation rate with 10 exp 47.5 ergs of energy produced for each solar mass consumed into stars. It is shown that the X-ray emission from bright FIR galaxies can make a significant contribution to the observed X-ray background.

David, L. P.↗

Eta Carinae and the Homunculus: An Astrophysical Laboratory

High spatial resolution spectroscopy with HST/STIS between 1998.0 and 2004.2 has provided much exciting information about the central binary system and the physics of its N-rich, C,O-poor ejecta. Stellar He I profiles, noticeably blue-shifted relative to P Cygni H and Fe II line profiles, originate from the ionized wind region between two massive companions. Changes in profiles of He I singlet and triplet lines provide clues to the excitation mechanisms involved as the hot, UV companion moves in its highly eccentric orbit. For 90% of the 5.54-year period, the spectra of nearby Weigelt blobs and the Little Homunculus include highly excited emission lines of Ar, Ne, and Fe. During the few month-long spectroscopic minimum, these systems are deprived of Lyman continuum. Recombination, plus cooling, occurs. In the skirt region between the bipolar Homunculus, a neutral emission region, devoid of hydrogen emission, glows in Ti II, Fe I, Sr II, Sc II, etc. We find the ejecta to have Ti/Ni abundances nearly 100 times solar, not due to nuclear processing, but due to lack of oxygen. Many metals normally tied up in interstellar dust remain in gaseous phase. Much information is being obtained on the physical processes in these warm N-rich gases, whose excitation varies with time in a predictable pattern. Indeed recent GRB high dispersion spectra include signatures of circumGRB warm gases. This indicates that the early, primordial massive stars have warm massive ejecta reminiscent to that around Eta Carinae.

Gull, Theodore R.↗

Solar Array Disturbances to Spacecraft Pointing During the Lunar Reconnaissance Orbiter (LRO) Mission

The Lunar Reconnaissance Orbiter (LRO), the first spacecraft to support NASA s return to the Moon, launched on June 18, 2009 from the Cape Canaveral Air Force Station aboard an Atlas V launch vehicle. It was initially inserted into a direct trans-lunar trajectory to the Moon. After a five day transit to the Moon, LRO was inserted into the Lunar orbit and successfully lowered to a low altitude elliptical polar orbit for spacecraft commissioning. Successful commissioning was completed in October 2009 when LRO was placed in its near circular mission orbit with an approximate altitude of 50km. LRO will spend at least one year orbiting the Moon, collecting lunar environment science and mapping data, utilizing a suite of seven instruments to enable future human exploration. The objective is to provide key science data necessary to facilitate human return to the Moon as well as identification of opportunities for future science missions. LRO's instrument suite will provide the high resolution imaging data with sub-meter accuracy, highly accurate lunar cartographic maps, mineralogy mapping, amongst other science data of interest. LRO employs a 3-axis stabilized attitude control system (ACS) whose primary control mode, the "Observing Mode", provides Lunar nadir, off-nadir, and inertial fine pointing for the science data collection and instrument calibration. This controller combines the capability of fine pointing with on-demand large angle full-sky attitude reorientation. It provides simplicity of spacecraft operation as well as additional flexibility for science data collection. A conventional suite of ACS components is employed in the Observing Mode to meet the pointing and control objectives. Actuation is provided by a set of four reaction wheels developed in-house at NASA Goddard Space Flight Center (GSFC). Attitude feedback is provided by a six state Kalman filter which utilizes two SELEX Galileo Star Trackers for attitude updates, and a single Honeywell Miniature Inertial Measurement Unit (MIMU) to provide body rates for attitude propagation. Rate is computed by differentiating accumulated angle provided by the MIMU. The Observing Mode controller is required to maintain fine pointing while a large fully-articulated solar array (SA) maintains its panel normal to the solar incidence. This paper describes the disturbances to the attitude control resulting from the SA articulation. Observing Mode performance in the presence of this disturbance was assessed while the spacecraft was in an initial elliptical low altitude orbit during the commissioning phase, which started about two weeks after launch and lasted for 90 days. LRO demonstrated excellent pointing performance during Observing Mode nadir and inertial attitude target operations during this phase. Transient LRO attitude errors observed during commissioning resulted primarily from three sources, Diviner instrument calibrations, RW zero crossings, and SA articulation. Even during times of considerable disturbance from SA articulation, the attitude errors were maintained below the statistical attitude error requirement level of 15 arc-sec (3 sigma).

Calhoun, Philip↗

Synthetic observables for electron-capture supernovae and low-mass core collapse supernovae

Stars in the mass range from 8 M ⊙ to 10 M⊙ are expected to produce one of two types of supernovae (SNe), either electron-capture supernovae (ECSNe) or core-collapse supernovae (CCSNe), depending on their previous evolution. Either of the associated progenitors retain extended and massive hydrogen-rich envelopes and the observables of these SNe are, therefore, expected to be similar. In this study, we explore the differences in these two types of SNe. Specifically, we investigate three different progenitor models: a solar-metallicity ECSN progenitor with an initial mass of 8.8 M ⊙ , a zero-metallicity progenitor with 9.6 M ⊙ , and a solar-metallicity progenitor with 9 M ⊙ , carrying out radiative transfer simulations for these progenitors. Here, we present the resulting light curves for these models. The models exhibit very low photospheric velocity variations of about 2000 km s -1 ; therefore, this may serve as a convenient indicator of low-mass SNe. The ECSN has very unique light curves in broad-bands, especially the U band, and does not resemble any currently observed SN. This ECSN progenitor being part of a binary will lose its envelope for which reason the light curve becomes short and undetectable. The SN from the 9.6 M ⊙ progenitor exhibits also quite an unusual light curve, explained by the absence of metals in the initial composition. The artificially iron-polluted 9.6 M ⊙ model demonstrates light curves closer to normal SNe IIP. The SN from the 9 M ⊙ progenitor remains the best candidate for so-called low-luminosity SNe IIP like SN 1999br and SN 2005cs.

79 ASTRONOMY AND ASTROPHYSICS↗

Rates and delay times of type Ia supernovae in the Dark Energy Survey

We use a sample of 809 photometrically classified Type Ia supernovae (SNe Ia) discovered by the Dark Energy Survey (DES) along with 40 415 field galaxies to calculate the rate of SNe Ia per galaxy in the redshift range 0.2 < z < 0.6. We recover the known correlation between SN Ia rate and galaxy stellar mass across a broad range of scales 8.5 ≤ log (M*/M ⊙ ) ≤ 11.25. We find that the SN Ia rate increases with stellar mass as a power law with index 0.63 ± 0.02, which is consistent with the previous work. We use an empirical model of stellar mass assembly to estimate the average star formation histories (SFHs) of galaxies across the stellar mass range of our measurement. Combining the modelled SFHs with the SN Ia rates to estimate constraints on the SN Ia delay time distribution (DTD), we find that the data are fit well by a power-law DTD with slope index β = –1.13 ± 0.05 and normalization A = 2.11 ± 0.05 × 10 –13 SNe M ⊙ –1 yr –1 , which corresponds to an overall SN Ia production efficiency N Ia /M * = 0.9 $^{+4.0}_{–0.7}$ × 10 –3 SNe M$^{–1}_{⊙}$. Upon splitting the SN sample by properties of the light curves, we find a strong dependence on DTD slope with the SN decline rate, with slower-declining SNe exhibiting a steeper DTD slope. We interpret this as a result of a relationship between intrinsic luminosity and progenitor age, and explore the implications of the result in the context of SN Ia progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution IUE observations of interstellar absorption lines in the Vela supernova remnant

Ultraviolet spectra of 45 stars in the vicinity of the Vela supernova remnant were recorded by the short-wavelength echelle spectrograph aboard the International Ultraviolet Explorer (IUE). Over one-third of the stars show interstellar absorption lines at large radial velocities (greater than 60 km/s). The mapping of these high-velocity components in the sky suggests the motions are chaotic, rather than from a coherent expansion of the remnant material. In accord with earlier conclusions from Copernicus data, the gas at high velocity exhibits higher than normal ionization and shows substantially less depletion of nonvolatile elements than normal interstellar material at low velocities. Relatively strong lines from neutral carbon in the two excited fine-structure states indicate that the neutral clouds within the remnant have had their pressures enhanced by the passage of the blast wave from the supernova. Also, the remnant seems to show a significant enhancement in the abundances of low-velocity Si IV, C IV, and N V over those found in the general interstellar medium.

Jenkins, E. B.↗

Astrophysical implications of periodicity

Two remarkable discoveries of the last decade have profound implications for astrophysics and for geophysics. These are the discovery by Alvarez et al., that certain mass extinctions are caused by the impact on the earth of a large asteroid or comet, and the discovery by Raup and Sepkoski that such extinctions are periodic, with a cycle time of 26 to 30 million years. The validity of both of these discoveries is assumed and the implications are examined. Most of the phenomena described depend not on periodicity, but just on the weaker assumption that the impacts on the earth take place primarily in showers. Proposed explanations for the periodicity include galactic oscillations, the Planet X model, and the possibility of Nemesis, a solar companion star. These hypotheses are critically examined. Results of the search for the solar companion are reported. The Deccan flood basalts of India have been proposed as the impact site for the Cretaceous impact, but this hypotheisis is in contradiction with the conclusion of Courtillot et al., that the magma flow began during a period of normal magnetic field. A possible resolution of this contradiction is proposed.

Muller, Richard A.↗

Modeling the Redshift Evolution of the Normal Galaxy X-Ray Luminosity Function

Emission from X-ray binaries (XRBs) is a major component of the total X-ray luminosity of normal galaxies, so X-ray studies of high-redshift galaxies allow us to probe the formation and evolution of XRBs on very long timescales (approximately 10 Gyr). In this paper, we present results from large-scale population synthesis models of binary populations in galaxies from z = 0 to approximately 20. We use as input into our modeling the Millennium II Cosmological Simulation and the updated semi-analytic galaxy catalog by Guo et al. to self-consistently account for the star formation history (SFH) and metallicity evolution of each galaxy. We run a grid of 192 models, varying all the parameters known from previous studies to affect the evolution of XRBs. We use our models and observationally derived prescriptions for hot gas emission to create theoretical galaxy X-ray luminosity functions (XLFs) for several redshift bins. Models with low common envelope efficiencies, a 50% twins mass ratio distribution, a steeper initial mass function exponent, and high stellar wind mass-loss rates best match observational results from Tzanavaris & Georgantopoulos, though they significantly underproduce bright early-type and very bright (L(sub x) greater than 10(exp 41)) late-type galaxies. These discrepancies are likely caused by uncertainties in hot gas emission and SFHs, active galactic nucleus contamination, and a lack of dynamically formed low-mass XRBs. In our highest likelihood models, we find that hot gas emission dominates the emission for most bright galaxies. We also find that the evolution of the normal galaxy X-ray luminosity density out to z = 4 is driven largely by XRBs in galaxies with X-ray luminosities between 10(exp 40) and 10(exp 41) erg s(exp −1).

Tremmel, M.↗

Rotation curves and dynamical masses of MaNGA barred galaxies

In this paper we analyse a sample of 46 barred galaxies of MaNGA. Our goal is to investigate the stellar kinematics of these galaxies and obtain their rotation curves. Additionally, we aim to derive the total stellar and dynamical masses, as well as the maximum rotation velocity, in order to examine their distributions and scaling relations. Using the Pipe3D dataproducts publicly available we obtained the rotation curves, which were fitted considering two components of an axisymmetric Miyamoto–Nagai gravitational potential. We found a wide range of the maximum rotation velocities (117–340 ${\rm km\, s^{-1}}$), with a mean value of 200 ${\rm km\, s^{-1}}$. In addition we found that the total stellar and dynamical masses are in the range of log(M star /M ⊙ ) = 10.1−11.5, with a mean value of log(M star /M ⊙ ) = 10.8, and log(M dyn /M ⊙ ) = 10.4−12.0, with a mean value of log(M dyn /M ⊙ ) = 11.1, respectively. We found a strong correlation between dynamical mass and maximum velocity, between maximum velocity and magnitude, and between stellar mass and maximum velocity. According to these results, barred galaxies exhibit similar behaviour to that of normal spiral galaxies with respect to these relations, as well as in terms of the distribution of their dynamical mass and maximum rotation velocity. However, we found that the distribution of stellar masses of barred galaxies is statistically different from other samples including non-barred galaxies. Finally, analysing the galaxies that show nuclear activity, we find no difference with the rotation curves of normal galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Color-magnitude diagrams for six metal-rich, low-latitude globular clusters

Colors and magnitudes for stars on CCD frames for six metal-rich, low-latitude, previously unstudied globular clusters and one well-studied, metal-rich cluster (47 Tuc) have been derived and color-magnitude diagrams have been constructed. The photometry for stars in 47 Tuc are in good agreement with previous studies, while the V magnitudes of the horizontal-branch stars in the six program clusters do not agree with estimates based on secondary methods. The distances to these clusters are different from prior estimates. Redding values are derived for each program cluster. The horizontal branches of the program clusters all appear to lie entirely redwards of the red edge of the instability strip, as is normal for their metallicities.

Armandroff, Taft E.↗

The three micron 'ice' band in grain mantles

Attention is given to the influence of different mantle constituents on extinction and polarization due to H2O absorption in grain mantles, particularly the 3250/cm band. With respect to BN, the simultaneous reproduction of the extinction and polarization band shapes occurs by normal size particles containing mixtures of H2O with other molecules. As regards the 3-micron absorption in OH 231.8 plus 4.2, the data can be best fitted with pure amorphous H2O grains which have been heated to (or created at) about 80 K. The variation in grain mantle composition between young stellar objects and late-type stars loosing mass is attributed to a fundamental difference in grain formation and evolution.

Hagen, W.↗

Amplitude calibration of spaceborne synthetic aperture radars

Problems encountered during attempts to calibrate SAR imagery, recent successful experiments conducted with SEASAT SAR data, and a proposed program for the calibration and validation of the radar imagery from the forthcoming SIR-B SAR are discussed. The SEASAT SAR data for 10 passes over Death Valley, California, were processed with a modified digital correlator. The procedure included a preliminary screening of the data to check for raw data saturation, compensation of waveforms and estimation of the amplitude of the pilot tone. All data was normalized to this pilot tone signal to reduce the effects of variable gains in the data links and ground receivers. The digital correlation algorithm generated image data. Evaluation of 6 passes results in a maximum pass to pass gain variation of only 1.1 dB and a standard deviation amongst the passes of 0.35 dB. previously announced in STAR as N83-26215

Held, D. N.↗