Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Low temperature plasma enhanced atomic layer deposition of conducting zirconium nitride films using tetrakis (dimethylamido) zirconium and forming gas (5% H{sub 2} + 95% N{sub 2}) plasma

Zirconium nitride (ZrN) has the lowest bulk electrical resistivity and high thermal stability among group IV and V transition metal nitrides, which makes it a promising material for ULSI applications such as a diffusion barrier for Cu interconnects, contact metal in III-V semiconductor devices, and in high density memory structures. Plasma enhanced atomic layer deposition (PEALD) of conducting ZrN thin films using Zr[N(CH{sub 3}){sub 2}]{sub 4} and forming gas (5% H{sub 2} + 95% N{sub 2}) plasma is reported in this article. The growth per cycle (GPC) for every deposition was determined from analysis of dynamic in-situ spectroscopic ellipsometry (d-iSE) measurements. An experimental design is proposed for faster determination of ALD growth saturation curves. At substrate temperature of 150 °C, a GPC of 0.10 nm/cycle was observed for self-limiting ZrN PEALD growth. The electrical resistivity of ZrN films deposited on SiO{sub 2} substrate was found to be 559.5 ± 18.5 μΩ cm with negligible change in resistivity even after ∼1000 h exposure to air. The metallic behavior of our ZrN films was evident from the free electron dispersion component in dielectric response, the broad band of photoelectron emission across Fermi level and the positive temperature coefficient for resistivity of 0.0088/ °C.

36 MATERIALS SCIENCE↗

Effect of Gallium Nitride Film Growth Conditions on Surface Segregation

The micro-and nanomorphology and local composition of gallium nitride (GaN) films produced by four different procedures have been studied with the aim of detecting autosegregation phenomena. As a result, a complex autosegregation picture has been demonstrated and discussed. Independent of the growth procedure, all of the gallium nitride films have nonstoichiometric chemical compositions (gallium deficiency), with a degree of nonstoichiometry ranging from ~0.30 to <0.10. We discuss the segregation mechanism, which presumably involves predominant selective diffusion of nitrogen atoms to the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Soliton mechanism of the uranium nitride microdynamics and heat conductivity at high temperatures

The microdynamics of soliton waves and localized modes of nonlinear acoustic and optical oscillations in uranium nitride has been investigated. It is shown that, upon heating, the energies of solitons in the gap between the optical and acoustic phonon bands increase, while the energies of local modes decrease. The experimentally observed quasi-resonance features, which are shifted in the gap with a change in temperature, can be manifestations of the revealed soliton waves and local modes. The microdynamics of uranium nitride heat conductivity with the stochastic generation of the observed solitons and local modes at remote energy absorption have been investigated. The temperature dependence of the heat conductivity coefficient has been determined from the temperature gradient and energy flux within the standard approach (which is to be generalized).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of crystalline ZnO films on the nitridated (0001) sapphire surface

The surface morphology and structure of (0001) sapphire substrates subjected to thermochemical nitridation in a mixture of N{sub 2}, CO, and H{sub 2} gases are investigated by electron and probe microscopy and X-ray and electron diffraction. It is shown that an aluminum nitride layer is formed on the substrate surface and heteroepitaxial ZnO films deposited onto such substrates by magnetron sputtering have a higher quality when compared with films grown on sapphire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron spin resonance and photoluminescence in pyrolytic silicon nitride films irradiated with argon and molecular ions

The photoluminescence and electron spin resonance phenomena are studied at room temperature for pyrolytic silicon nitride films irradiated with argon ions or molecular nitrogen ions and annealed at temperatures in the range 500-1100{sup o}C. The absorption spectrum suggests that the broad photoluminescence band at 400-600 nm is due to electron transitions between the band tails. The low-dose irradiation with argon ions slightly reduces the photoluminescence intensity, whereas the high-dose irradiation followed by annealing at 800-900{sup o}C can induce a more than twofold increase in the intensity. At the same time, irradiation with nitrogen ions profoundly suppresses the integrated photoluminescence intensity that decreases by more than an order of magnitude. A correlation between the changes in the photoluminescence intensity and the amplitude of the ESR spectra on annealing of the silicon nitride films is observed.

36 MATERIALS SCIENCE↗

Layer-by-layer composition and structure of silicon subjected to combined gallium and nitrogen ion implantation for the ion synthesis of gallium nitride

The composition and structure of silicon surface layers subjected to combined gallium and nitrogen ion implantation with subsequent annealing have been studied by the X-ray photoelectron spectroscopy, Rutherford backscattering, electron spin resonance, Raman spectroscopy, and transmission electron microscopy techniques. A slight redistribution of the implanted atoms before annealing and their substantial migration towards the surface during annealing depending on the sequence of implantations are observed. It is found that about 2% of atoms of the implanted layer are replaced with gallium bonded to nitrogen; however, it is impossible to detect the gallium-nitride phase. At the same time, gallium-enriched inclusions containing ∼25 at % of gallium are detected as candidates for the further synthesis of gallium-nitride inclusions.

36 MATERIALS SCIENCE↗

Dependence of mobility on the electron concentration upon scattering at polar optical phonons in A{sup III}–N nitrides

The dependence of the effective relaxation time on the electron concentration in A{sup III}–N nitrides in the case of electron scattering at polar longitudinal optical phonons is calculated by the marching method. The method takes into account the inelasticity of electron scattering at polar optical phonons for nitrides in the zinc-blende approximation. The calculations show a substantial increase in mobility in samples with a degenerate electron gas, if screening of the long-range potential of polar longitudinal optical phonons is taken into account.

36 MATERIALS SCIENCE↗

On the photon annealing of silicon-implanted gallium-nitride layers

The conditions for the formation of ion-doped layers in gallium nitride upon the incorporation of silicon ions followed by photon annealing in the presence of silicon dioxide and nitride coatings are analyzed. The conditions of the formation of ion-doped layers with a high degree of impurity activation are established. The temperature dependences of the surface concentration and mobility of charge carriers in ion-doped GaN layers annealed at different temperatures are studied.

36 MATERIALS SCIENCE↗

Photoluminescence of amorphous and crystalline silicon nanoclusters in silicon nitride and oxide superlattices

The photoluminescence properties of silicon nitride and oxide superlattices fabricated by plasmaenhanced chemical vapor deposition are studied. In the structures annealed at a temperature of 1150°C, photoluminescence peaks at about 1.45 eV are recorded. The peaks are defined by exciton recombination in silicon nanocrystals formed upon annealing. Along with the 1.45-eV peaks, a number of peaks defined by recombination at defects at the interface between the nanocrystals and silicon-nitride matrix are detected. The structures annealed at 900°C exhibit a number of photoluminescence peaks in the range 1.3–2.0 eV. These peaks are defined by both the recombination at defects and exciton recombination in amorphous silicon nanoclusters formed at an annealing temperature of 900°C. The observed features of all of the photoluminescence spectra are confirmed by the nature of the photoluminescence kinetics.

36 MATERIALS SCIENCE↗

Dependence of Mechanical Stresses in Silicon Nitride Films on the Mode of Plasma-Enhanced Chemical Vapor Deposition

Films of silicon nitride SiN{sub x}, obtained by plasma-enhanced chemical vapor deposition from the monosilane SiH{sub 4} and ammonia NH{sub 3} gases, are widely used in microelectronics and micro- and nanoelectromechanical systems. Residual mechanical stresses and film composition are important characteristics for many applications. The properties of SiN{sub x} films, particularly mechanical stresses and composition, depend largely on the conditions of production, e.g., the ratio of the reacting gas flow rates, the composition of the gas mixture, the power and frequency of the plasma generator, and the temperature and pressure during deposition. Despite the great volume of works on the subject, data regarding the dependence of the properties and composition of SiN{sub x} films on the conditions of production remain sparse. This work considers the effect the ratio of the reacting gas flow rates has on the mechanical stresses and composition of silicon nitride films SiN{sub x} obtained by plasma-enhanced chemical vapor deposition from gaseous mixtures of SiH{sub 4} monosilane and NH{sub 3} ammonia using low-frequency plasma. It is found that when the ratio of the gas flow rates of SiH{sub 4} and NH{sub 3} is raised from 0.016 to 0.25, the compressive mechanical stresses are reduced by 31%, the stoichiometric coefficient falls from 1.40 to 1.20, the refractive index rises from 1.91 to 2.08, the concentration of N–H bonds is reduced by a factor of 7.4, the concentration of Si–H bonds grows by a factor of 8.7, and the concentration of hydrogen atoms is reduced by a factor of 1.5. These results can be used for the controlled production of SiN{sub x} films with such specified characteristics as residual mechanical stresses, refractive index, stoichiometric coefficient, and the concentration of hydrogen-containing bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Piezoelectric Properties of 2D Nanoallotropes of Boron Nitride

Abstract—: The independent components of the tensor of piezoelectric moduli are calculated for various 2D nanoallotropes of boron nitride. The principle of the proposed approximation calculation method consists in the fact that the effective dipole moment of the unit cell of the 2D structure normalized to the unit area is expressed through the tensor of elastic rigidities and relative cell deformations. It is shown that, in addition to well-known graphite-like boron nitride h-BN, its other hexagonal and tetragonal nanoallotropes possessing higher piezoelectric properties in comparison to h-BN can be of practical interest as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dataset for "Resistance of Boron Nitride Nanotubes to Radiation-Induced Oxidation" as published in The Journal of Physical Chemistry C

We present unprecedented results on the damage thresholds and pathways for boron nitride nanotubes (BNNT) under the influence of energetic electrons in an oxidative gas environment, using an environmental aberration-corrected electron microscope over a range of oxygen pressures. We observe a damage cascade process that resists damage until a higher electron dose, compared with carbon nanotubes, initiating at defect-free BNNT sidewalls and proceeding through the conversion from crystalline nanotubes to amorphous boron nitride (BN), resisting oxidation throughout. We compare with prior results on the oxidation of carbon nanotubes and present a model that attributes the onset of damage in both cases to a physisorbed oxygen layer that reduces the threshold for damage onset. Surprisingly, increased temperatures offer protection against damage, as do electron dose rates that significantly exceed the oxygen dose rates, and our model attributes both effects to a physisorbed oxygen population.

Adsorption↗

Synthesis and behavior of bulk iron nitride soft magnets via high-pressure spark plasma sintering

Abstract In this study, dense bulk iron nitrides (Fe x N) were synthesized for the first time ever using spark plasma sintering (SPS) of Fe x N powders. The Fe 4 N phase of iron nitride in particular has significant potential to serve as a new soft magnetic material in both transformer and inductor cores and electrical machines. The density of SPSed Fe x N increased with SPS temperature and pressure. The microstructure of the consolidated bulk Fe x N was characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRD revealed a primary phase of Fe 4 N with secondary phases of Fe 3 N and metallic iron. Finite element analysis (FEA) was also applied to investigate and explain localized heating and temperature distribution during SPS. The effects of processing on interface bonding formation and phase evolution were investigated and discussed in detail to provide insight into fundamental phenomena and microstructural evolution in SPSed Fe x N. Graphic abstract

36 MATERIALS SCIENCE↗

Lithium nitride coatings deposited by magnetron sputtering on sulfide electrolytes for solid-state batteries

Lithium nitrides have been considered as promising candidates for interfacial layers in solid-state lithium batteries (SSBs). Previously reported lithium nitride (Li 3 N) coatings were mostly prepared by the reaction between lithium metal and nitrogen gas, which makes it challenging for their thickness control and integration in SSBs. In this study, we prepare Li 3 N via magnetron sputtering for the first time, and apply the resulting coating directly on sulfide solid-state electrolyte. A much smaller impedance increase associated with improved cycling performance is observed in lithium metal symmetric cell. These results demonstrate the feasibility of depositing Li 3 N via magnetron sputtering and its application in SSBs.

25 ENERGY STORAGE↗

Nitrogen Atom Transfer From High Valent Iron Nitrides

This report describes the synthesis and reactions of high valent iron nitrides. Organonitrogen compounds such as aziridines are useful species for organic synthesis, but there are few efficient methods for their synthesis. Using iron nitrides to catalytically access these species may allow for their synthesis in an energy-and atom-efficient manner. We have developed a new ligand framework to achieve these goals as well as providing a method for inducing previously unknown reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low Forward Voltage III-Nitride Red Micro-Light-Emitting Diodes on a Strain Relaxed Template with an InGaN Decomposition Layer

In this study, III-nitride red micro-light-emitting diodes (µLEDs) with ultralow forward voltage are demonstrated on a strain relaxed template. The forward voltage ranges between 2.00 V and 2.05 V at 20 A/cm 2 for device dimensions from 5 x 5 to 100 x 100 µm 2 . The µLEDs emit at 692 nm at 5 A/cm 2 and 637 nm at 100 A/cm 2 , corresponding to a blueshift of 55 nm due to the screening of the internal electric field in the quantum wells. The maximum external quantum efficiency and wall-plug efficiency of µLEDs are 0.31% and 0.21%, respectively. This suggests that efficient III-nitride red µLEDs can be realized with further material optimizations.

36 MATERIALS SCIENCE↗

Photocatalytic Generation of Singlet Oxygen by Graphitic Carbon Nitride for Antibacterial Applications

Carbon-based functional nanocomposites have emerged as potent antimicrobial agents and can be exploited as a viable option to overcome antibiotic resistance of bacterial strains. In the present study, graphitic carbon nitride nanosheets are prepared by controlled calcination of urea. Spectroscopic measurements show that the nanosheets consist of abundant carbonyl groups and exhibit apparent photocatalytic activity under UV photoirradiation towards the selective production of singlet oxygen. Therefore, the nanosheets can effectively damage the bacterial cell membranes and inhibit the growth of bacterial cells, such as Gram-negative Escherichia coli, as confirmed in photodynamic, fluorescence microscopy, and scanning electron microscopy measurements. The results from this research highlight the unique potential of carbon nitride derivatives as potent antimicrobial agents.

36 MATERIALS SCIENCE↗

Synthesis of Binary Transition Metal Nitrides, Carbides and Borides from the Elements in the Laser-Heated Diamond Anvil Cell and Their Structure-Property Relations

Transition metal nitrides, carbides and borides have a high potential for industrial applications as they not only have a high melting point but are generally harder and less compressible than the pure metals. Here we summarize recent advances in the synthesis of binary transition metal nitrides, carbides and borides focusing on the reaction of the elements at extreme conditions generated within the laser-heated diamond anvil cell. The current knowledge of their structures and high-pressure properties like high-(p, T) stability, compressibility and hardness is described as obtained from experiments.

synthesis↗