Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple cycles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Development and performance of INCONEL® alloy 740H® seam-welded piping

INCONEL® alloy 740H® is an age-hardenable nickel-based alloy approved for pressure vessels and piping within ASME Section I, VIII, and B31.1. Currently, the code applies a weld strength reduction factor (WSRF) of 0.7 to the allowable stresses for longitudinal seam welds in the time dependent creep regime. In this work, a full-scale seam weld was successfully produced using typical industrial practices. The component was solution heat-treated and aged after fabrication to improve the performance of the weldment. Tensile, bend, impact, and low-cycle fatigue tests showed the component met all the specification requirements and elevated temperature properties were within base metal expectations with failures predominately in the weld metal. Long-term creep tests, including large samples more representative of the entire weldment, were fabricated and tested to times in excess of 10,000 h at multiple temperatures. Analysis of the creep data supports a WSRF of 0.9 for the solution annealed + aged weldments in contrast to the WSRF of 0.7 currently applied to welded + aged weldments. Metallurgical analysis shows that the solution annealing causes recrystallization of the weld metal and reduces the chemical compositional and microstructural gradients in the weldments resulting in acceptable short-term performance. In long-term creep, evidence for coarsened zones in the weldments due to discontinuous coarsening reactions were identified as the mechanism leading to accelerated creep damage formation in the weld metal and sample failure.

14 SOLAR ENERGY↗
DOE OSTI2021

Validation of the Community Land Model Version 5 over the Contiguous United States (CONUS) using in situ and remote sensing data sets

The Community Land Model (CLM) is an effective tool to simulate the biophysical and biogeochemical processes and their interactions with the atmosphere. Although CLM Version 5 (CLM5) constitutes various updates in these processes, its performance in simulating energy, water and carbon cycles over the Contiguous United States (CONUS) at scales which land surface changes and hydrometeorological and hydroclimatological applications are more locally relevant is yet to be assessed. In this study, we conducted three simulations at 0.125? during 1979-2018 over the CONUS using different configurations of CLM, namely CLM5-biogeochemistry (CLM5BGC), CLM4.5BGC, and CLM5-satellite phenology (CLM5SP). We validated and compared their simulations against multiple remote-sensed and in-situ datasets. Overall, the parametric and structural updates (e.g., carbon cost for nitrogen uptake, variable soil thickness, dry surface layer) in CLM5 improve its ability in capturing terrestrial biogeochemical dynamics. The low evapotranspiration in CLM5BGC is associated with biases in simulating vegetation phenological characteristics rather than soil water limitations. The mismatch between CLM5BGC-simulated peak leaf area index and reference data can be attributed to CLM5BGC's inability in simulating phenology of trees and grasses. The differences between CLM-simulated irrigation and reference estimates can be attributed to differences between processes represented in models and in reality, and uncertainties in input and validation datasets. Evaluation against observations at small catchments suggest that hydrologic parameters needed to be calibrated to improve simulations of runoff, especially subsurface runoff. Additional efforts are needed to incorporate spatially-distributed plant phenology and physiology parameters and regional-specific agricultural management practices (e.g., planting, harvest).

Cheng, Yanyan↗
DOE OSTI2020

A life cycle analysis (LCA) primer for the agricultural community

Consumer demand for sustainably produced agricultural products is increasing. One approach that can be used to evaluate and compare product sustainability is to conduct a life cycle analysis (LCA). The term LCA is broadly used to describe a suite of analytical resources and standardized methods. Life cycle analyses are a transdisciplinary tool which can and are used by all professions but work best when conducted by teams with diverse skills and backgrounds. The objective of this paper is to provide a primer on LCAs for the agricultural community and for LCA practitioners unfamiliar with agronomy. Agricultural LCAs can differ greatly because agricultural products have multiple end uses, complex socio-economic and environmental trade-offs, and can be generated using a variety of different practices, resources, and production systems. Through worldwide agricultural marketing, intricate agronomic supply chains and support systems have been developed to produce, store, and distribute agricultural products. In many situations, the production practices are not linked to the products consumers purchase. This limitation can be partially overcome by conducting an LCA, which is a systematic summation of the multiple environmental impacts associated with the production, use, and disposal of a product. However, the large number and types of analyses can make it difficult for non-practitioners and decision-makers to use and interpret LCA results. Finally, it is important for members of the agricultural community to be aware of these analyses and how they can be used and how they affect product markets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Illumination of serotonin transporter mechanism and role of the allosteric site

The serotonin transporter (SERT) terminates serotonin signaling by using sodium and chloride gradients to drive reuptake of serotonin into presynaptic neurons and is the target of widely used medications to treat neuropsychiatric disorders. Despite decades of study, the molecular mechanism of serotonin transport, the coupling to ion gradients, and the role of the allosteric site have remained elusive. Here, we present cryo–electron microscopy structures of SERT in serotonin-bound and serotonin-free states, in the presence of sodium or potassium, resolving all fundamental states of the transport cycle. From the SERT-serotonin complex, we localize the substrate-bound allosteric site, formed by an aromatic pocket positioned in the scaffold domain in the extracellular vestibule, connected to the central site via a short tunnel. Together with elucidation of multiple apo state conformations, we provide previously unseen structural understanding of allosteric modulation, demonstrating how SERT binds serotonin from synaptic volumes and promotes unbinding into the presynaptic neurons.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Integrated system failure analysis software toolchain (IS-FAST)

Systems and methods are provided for generating faults and analyzing fault propagation and its effects. Starting from the ontologies of components, functions, flows, and faults, systems and methods are provided that describe, generate and track faults in a computer system across multiple domains throughout design and/or development. In order to construct the system and fault models, a series of concepts is introduced in the form of ontologies and their dependencies. An investigation is performed into the faults, including their type, cause, life-cycle aspects, and effect. Principles and rules are created to generate various faults based on system configurations. After the modeling process, a simulation engine is described to execute actions and simulate the process of fault generation and propagation. As a result, fault paths that impact components and functions can be obtained.

Diao, Xiaoxu↗
DOE OSTI2026

Optimized Gear Selection to Maximize Energy Savings in Electric Traction Drives for Medium and Heavy Duty Vehicles

Multi‑gear transmission systems are commonly used in electric traction drives for medium and heavy‑duty vehicles, while most passenger‑vehicle electric drivetrains rely on a single fixed ratio to reduce cost, weight, and complexity. Using multiple gear ratios can enable downsizing of the motor and inverter while still meeting performance requirements. Additionally, appropriately chosen ratios allow the motor to operate more frequently in high‑efficiency regions, improving overall energy usage and reducing operating costs over the drive cycle. This paper presents a systematic approach for selecting optimal gear ratios for electric drive systems. A neural‑network model is first developed to represent motor losses across the full torque–speed range using data generated from finite element analysis. This model enables fast, accurate evaluation of motor efficiency under varying operating conditions. A genetic‑algorithm‑based optimization framework is then applied to identify gear ratios that maximize energy cost savings over the drive cycle, with the resulting optimal ratios stored for real‑time implementation.

Gadiyar, Nishanth [ORNL] (ORCID:0000000348267524)↗
DOE OSTI2023

Comparing Parallel Plastic‐to‐X Pathways and Their Role in a Circular Economy for PET Bottles

Abstract The United States generates the most plastic waste of any country and is a top contributor to global plastic pollution. Multiple end‐of‐life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different lifetimes and utilities. Herein, they present a material flow model equipped with consequential life cycle assessment, cost analysis, and a plastic circularity indicator that considers product quality and lifetime. The model is used to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) bottle mechanical downcycling to lower‐quality resin, closed‐loop glycolysis to food‐grade PET, upcycling to glass fiber‐reinforced plastic, and conversion to non‐plastic products (electricity, oil) on a United States economy‐wide basis for the year 2020. A brute force algorithm suggests that a combination of 68% glycolysis, 11% mechanical recycling, 6% upcycling, 9% landfilling, and 5% incineration can minimize the cost and GHG emissions and maximize the circularity of the current PET economy. However, uncertainty around transportation distances, materials recovery facility efficiencies, and recycling yields can result in different “optimal” pathway mixes. This flexible framework enables informed decision‐making to move toward a cost‐ and environment‐conscious circular economy for plastic.

09 BIOMASS FUELS↗
DOE OSTI2024

Enriched Background Isotope Study (EBIS): Analysis of 14C-Enriched Carbon Cycle in Soils and Litter at Forested Oak Ridge and AmeriFlux Sites, 2001-2011

These data provide a record of the multi-year, multi-institutional Enriched Background Isotope Studies (EBIS) projects that ran from 2000 through 2011. Elevated levels of 14C enriched CO2 in the air and soil atmosphere as well as leaf, stem, and root tissues were observed on the Oak Ridge Reservations (ORR) during the summer of 1999, and were attributed to local incinerator activities on and/or near the ORR (Trumbore et al. 2002). The isolated enrichment of the background levels of 14C in local forest ecosystem represented a unique opportunity to study unresolved carbon cycling processes such as the contribution of leaf versus root litter contributions to soil carbon accumulation, the rate of vertical transport of carbon into deep soil storage pools, and the differential contribution of physicochemical versus faunal driven processes to soil carbon cycling and sequestration. Leaf litter from the local enriched forest was transplanted to selected sites on the ORR and to selected AmeriFlux study sites to study soil C cycling across a range of soils and climates. The EBIS research projects provide data on C flux from litter sources to mineral soil sinks for United States eastern hardwood forests necessary for testing process hypotheses and judging efficacy of soil C cycling models. Experimental results from this study are being used to parameterize and refine existing carbon dynamics models, the quantification of the long-term fate of ecosystem carbon inputs and as a means to judge the potential for ecosystem carbon sequestration via enhance litter inputs to soil. EBIS observations support conclusions that intra- and inter-annual soil carbon cycling in hardwood forest soils should be characterized as a least a two-compartment system where surface leaf-litter and belowground root turnover represent primary carbon sources for organic-layer and mineral-soil carbon cycles, respectively. EBIS experiments were conducted to complete enriched litterfall maniplations in upland forests on Ultisol and Inceptisol soils of the Oak Ridge Reservation, Oak Ridge, Tennessee. We also collected additional14C-enriched materials for new experimental applications, and applied those materials to multiple AmeriFlux sites over a range of climatic, edaphic and biological conditions. The research provided data for addressing DOE's goal of understanding mechanisms controlling C flux, and for the improvement of models to be applied to policy discussions regarding the safe levels of greenhouse gases for the earth's system. There are 5 data files provided in comma separated (*.csv) format for vegetation, field litter, soil and air [C] and C isotope data from the EBIS studies and associated environmental data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Distortions of the Rain Distribution With Warming, With and Without Self-Aggregation

We investigate how mesoscale circulations associated with convective aggregation can modulate the sensitivity of the hydrologic cycle to warming. We quantify changes in the full distribution of rain across radiative-convective equilibrium states in a cloud-resolving model. For a given Sea Surface Temperature (SST), the shift in mean rainfall between disorganized and organized states is associated with a shift in atmospheric radiative cooling, and is roughly analogous to the effect of a 4K SST increase. With rising temperatures, the increase in mean rain rate is insensitive to the presence of organization, while extremes can intensify faster in the aggregated state, leading to a faster amplification in the sporadic nature of rain. When convection aggregates, heavy rain is enhanced by 20%–30% and nonlinear behaviors are observed as a function of SST and strength of aggregation feedbacks. First, radiative- and surface-flux aggregation feedbacks have multiplicative effects on extremes, illustrating a non-trivial sensitivity to the degree of organization. Second, alternating Clausius-Clapeyron and super-Clausius-Clapeyron regimes in extreme rainfall are found as a function of SST, corresponding to varying thermodynamic and dynamic contributions, and a large sensitivity to precipitation efficiency variations in some SST ranges. The potential for mesoscale circulations in amplifying the hydrologic cycle is established. However, these nonlinear distortions question the quantitative relevance of idealized self-aggregation. This calls for a deeper investigation of relationships which capture the coupling between global energetics, aggregation feedbacks and local convection, and for systematic tests of their sensitivity to domain configurations, surface boundary conditions, microphysics, and turbulence schemes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Introduction of the Adding and Doubling Method for Solving Bateman Equations for Nuclear Fuel Depletion

This paper introduces and evaluates the Adding and Doubling Method (ADM) for solving the Bateman equations for depletion systems with varying numbers of nuclides and compares it to the Chebyshev Rational Approximation Method (CRAM), both implemented in the reactor physics analysis application Griffin. ADM, when applied to the Crank-Nicolson Finite Difference method, can produce results comparable in accuracy and precision to CRAM with comparable run times for systems with 35 or 297 nuclides. For systems with more than 300 nuclides, the matrix-matrix operations required by ADM are significantly more costly than the matrix-vector operations required by CRAM, making CRAM the more efficient method for systems with large numbers of nuclides. ADM is an accurate method that maintains other advantages over CRAM in that it does not depend on pre-generated coefficients or require complex number operations. ADM also manages to outperform CRAM by a factor of more than 250 in terms of run time for depletion systems that require multiple Bateman solves while the depletion matrix and time step size remain constant over all depletion intervals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

HERA M&S Exercise Problem Description Report

The Nuclear Energy Agency (NEA) Framework for Irradiation Experiments (FIDES) program includes the High burnup Experiments for Reactivity initiated Accident (HERA) Joint Experimental Program (JEEP). The HERA project is focused on studying Light Water Reactor (LWR) fuel behavior during Reactivity Initiated Accident (RIA) conditions. The HERA experiment plan includes analytical integral experiments using test specimens tailored to investigate specific conditions of relevance as well as prototypic integral experiments focused on irradiated fuel from prototypic origin. Modeling & simulation (M&S) is a key component of any experiment program, and the HERA JEEP is coordinating a M&S exercise. The purpose of this document is to provide problem descriptions to support the HERA M&S exercise based on fuel performance modeling. The HERA M&S exercise is expected to evolve into multiple efforts in outyears. This document may be revised and expanded to incorporate those evolutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Machine-Learning Assisted Identification of Battery Life Models

Predictive battery life models are commonly utilized to extrapolate degradation trends observed during accelerated aging tests for simulation of degradation in real-world applications. Thus, fitting accelerated aging data as accurately as possible and with low uncertainty is crucial for making believable projections of battery lifetime, but it is challenging to identify algebraic expressions that accurately fit multivariate degradation trends. A review of models published in literature reveal some common expressions for fitting calendar aging data, which is only dependent on temperature and state-of-charge, but no consistency across many models for fitting cycle aging data, indicating the need for a statistically rigorous data driven approach for developing empirical models. This talk will describe a machine-learning assisted method for identification of predictive battery life models utilizing bilevel optimization and symbolic regression. Bilevel optimization with cross-validation is used to statistically determine cell- and stress-dependent model parameters, while symbolic regression identifies both linear and multiplicative candidate expressions to predict stress-dependent degradation rates by selecting low-order subsets of features from a generated feature library. Because model expressions are identified empirically, it is crucial to ensure resulting models behave according to physical expectations, so the stability of models for interpolation or extrapolation is interrogated qualitatively through simulation and quantitatively through cross-validation and uncertainty quantification via bootstrap resampling. This model identification approach substantially improves upon models identified purely using expert judgement in terms of both accuracy and uncertainty. Model simulation and validation is then conducted by deriving a state-equation form of the predictive model, enabling simulation of battery aging under dynamic stresses. This enables validation of the predictive battery model on lab-based tests with varying conditions or on drive-cycle or application-cycle testing protocols. Parameter uncertainty can be carried forward into model simulation, giving lifetime estimates and confidence windows for cell- or system-level lifetime. The financial impact of battery model uncertainty can be estimated by incorporating uncertainty into a technoeconomic model.

battery↗
DOE OSTI2024

In Situ Cyclized Polyacrylonitrile Coating: Key to Stabilizing Porous High-Entropy Oxide Anodes for High-Performance Lithium-Ion Batteries

High-entropy oxides (HEOs) composed of multiple metal elements have attracted great attention as anode materials for lithium-ion batteries (LIBs) due to the synergistic effects of various metal species. However, the practical applications of HEOs are still plagued by poor conductivity, unstable solid electrolyte interphase (SEI) and poor cycling stability. In this work, nanosized (FeCoNiCrMn) 3 O 4 HEO (NHEO) is prepared successfully by the NaCl-assisted mechanical ball-milling strategy. Novelly, polyacrylonitrile (PAN) is used as the binder and then in situ thermochemically cyclized to construct a cyclized PAN (cPAN) outer layer onto NHEO (NHEO-cPAN). The in situ formed cPAN coating not only improves the electrical conductivity, but also reinforces the structural and interfacial stability, and thereby, the resulted NHEO-cPAN electrode exhibits significantly enhanced rate and cyclic performance. Specifically, NHEO-PAN500 electrode delivers a high reversible capacity of 560 mAh g –1 at 5 A g –1 and a high-capacity retention of 83% over 800 cycles at 3 A g –1 . Furthermore, the structural evolution and electrochemical behavior of NHEO-PAN electrode during discharge/charge is systematically investigated by operando X-ray diffraction, in situ impedance spectroscopy and ex situ high-resolution transmission electron microscopy. Therefore, this work provides new insights into the engineering of electrode and interphase for high-performance HEO electrode materials, potentially enlightening the practical applications of HEO-based LIBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Quantifying atmospheric carbon removal at pulp and paper mills: a life cycle assessment across system boundaries

The pulp and paper industry is a promising yet underexplored platform for large-scale carbon dioxide removal (CDR) due to its use of biogenic feedstocks and production of concentrated CO 2 emissions from point sources. This study presents the first comprehensive life cycle assessment (LCA) of retrofitting an amine-based carbon capture and storage (CCS) system into a representative virgin kraft pulp and paper mill in the Southeastern U.S. We evaluate carbon removal across five system configurations, applying both static and dynamic LCA methods under multiple functional units: CO 2 captured, biomass input, and paper output. Results show that CCS retrofits can convert a conventional mill from a net emitter into a net carbon sink, with total removal efficiencies from 17% to 92% (metric tonnes of CO 2 removed per metric tonne of CO 2 available for removal under selected boundary conditions). When carbon removal is normalized to the quantity of biogenic CO 2 captured—a narrow, gate-to-gate system boundary that considers only CCS facility emissions—removal efficiencies reached as high as 92%. The use of such narrow boundaries aligns with precedents in traditional LCA methodology, where gate-to-gate assessments are commonly applied to isolate process-level performance and allocate emissions accordingly, providing a consistent basis for comparison across technologies. Under broader cradle-to-grave boundaries—which begin tracking carbon at the point of its physical removal from the atmosphere via photosynthesis in the forest, and extend to include upstream forest operations, mill-wide emissions, and downstream product decomposition—efficiencies declined, ranging from 17% to 46% under static assumptions and dropping to 12% when accounting for dynamic biogenic carbon fluxes over time. These results underscore how system boundary definitions influence reported outcomes, while also illustrating the complementary roles of narrow and broad perspectives for different decision-making contexts.

09 BIOMASS FUELS↗
DOE OSTI2024

SMARTER Rules-Based Distributed Deconfliction of ADMS Applications

A conceptual numerical methodology derived from Grid Architecture principles is introduced for deconflicting setpoints issued by multiple advanced distribution management system applications. The methodology applies technical, economic, environmental, and social rules to eliminate non-viable combinations. The concept of temporal equipment controls budgets is introduced to preserve the health of physical assets and avoid equipment damage through repeated controls cycling. The rules are combined with a multi-criteria decision-making framework to select a near-optimal set of deconflicted setpoints using a set of qualitative and quantitative decision criteria selected by the distribution system operator. Numerical results are demonstrated on the IEEE 123-bus test feeder for three competing applications. Three alternative distributed schemes are used to decompose the problem: by topological area, by phase, and fully decentralized. The fully decentralized implementation is shown to yield near-optimal deconfliction results with significantly reduced computational time.

Anderson, Alexander A.↗
DOE OSTI2025

Neutron-Friendly Li-Ion Battery Coin Cell for In Situ 3D Visualization of Li Plating

Advanced battery characterization using in situ/operando neutron imaging is critical for uncovering degradation modes such as lithium (Li) plating in Li-ion batteries (LIBs). However, conventional LIBs hinder operando neutron radiography (NR) and in situ neutron micro-computed tomography (N-μCT) for visualizing Li plating near the graphite-separator interface due to strong attenuation from hydrogen-rich components like PP–PE–PP separators, electrolyte, and Fe-based spacers. In this work, we designed and tested a neutron-friendly battery (NFB) optimized for in situ Li detection during extreme fast charging (XFC). Guided by neutron attenuation cross-sections and material transmission, the NFB enables clear visualization at the graphite–separator interface, which is typically opaque in standard LIBs. Electrochemical tests show the NFB exhibits voltage/current responses like standard cells for up to 50 XFC cycles. However, its lower reversibility and capacity are likely due to Cu-coated Al spacer degradation from delamination or corrosion. We propose titanium spacers as a more stable alternative, albeit requiring custom machining. Using this optimized cell, we achieved simultaneous neutron tomography of multiple cells, capturing in situ 3D images of dead Li accumulation, particularly near graphite edges. These heterogeneous deposits and disconnected Li clusters suggest localized current density hotspots during XFC.

25 ENERGY STORAGE↗
DOE OSTI2023

A Case Study of Tunable White LED Lighting with Networked Lighting Controls (Emory University Cognitive Empowerment Program)

Emory University and Georgia Institute of Technology (Georgia Tech) partnered to create the Charlie and Harriet Schaffer Cognitive Empowerment Program (CEP) facility in northeast Atlanta. Together with the funders they are building a program to help individuals experiencing mild cognitive impairment (MCI) to maintain their physical and cognitive health, and independence as long as possible. In addition to applying effective strategies and therapies, the two research groups are investigating the responses of the MCI members to treatments that involve acoustical conditions, exercise and movement, and lighting changes that may support retention or relearning of skills. Care partners and family members receive support and instruction to improve home and work life, promoting joy, purpose, and wellness in the family groups. The lighting system uses tunable-white LEDs, employing luminaires with both warm and cool-color emitters that can be dimmed separately to produce any white correlated color temperature (CCT) between 2700 K and 6500 K. All luminaires were dimmable to achieve subdued or lively surroundings for different treatments, time-of-day, and mood. A central networked digital control system was employed to allow tuning of multiple spaces together (for example, bright, cool morning light could be programmed for extra stimulation, or lighting in all spaces at the end of the day could be reduced in both light output and CCT to promote relaxation and not interfere with the melatonin cycle of occupants). Almost all spaces were equipped with individual room control of dimming and color temperature with touch screens to allow users to tune the lighting as desired, but each room’s controls could also be specially programmed through the server in case the research staff were investigating lighting settings on learning, for example. The server incorporates a timeclock, and it is able to send signals to switch off all lighting after occupancy hours, or enable occupancy sensors to control the lighting. The bulk of the construction work was completed in January 2020. It was clear from an initial walk-through that although the lighting system produced the expected high light level with low-glare qualities of light, that there were issues and inconsistencies to be resolved. These were noted in an initial punchlist visit and expected to be resolved when the tech representatives from the agency visited with the electrical contractor in the following few weeks. What followed was 2.5 years of identifying unexpected lighting performance in terms of light output, color, scheduling, and occupancy. This report documents the issues encountered in the effort to get the lighting and controls systems to operate as intended. It concludes with guidance for design professionals and manufacturers to help avoid problematic complexity in future projects.

42 ENGINEERING↗