Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mooring system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Structural Anomaly Detection Using Fiber Optic Sensors and Inverse Finite Element Method

NASA Langley Research Center is investigating a variety of techniques for mitigating aircraft accidents due to structural component failure. One technique under consideration combines distributed fiber optic strain sensing with an inverse finite element method for detecting and characterizing structural anomalies anomalies that may provide early indication of airframe structure degradation. The technique identifies structural anomalies that result in observable changes in localized strain but do not impact the overall surface shape. Surface shape information is provided by an Inverse Finite Element Method that computes full-field displacements and internal loads using strain data from in-situ fiberoptic sensors. This paper describes a prototype of such a system and reports results from a series of laboratory tests conducted on a test coupon subjected to increasing levels of damage.

Quach, Cuong C.↗

Full-Duplex Digital Communication on a Single Laser Beam

A proposed free-space optical communication system would operate in a full-duplex mode, using a single constant-power laser beam for transmission and reception of binary signals at both ends of the free-space optical path. The system was conceived for two-way data communication between a ground station and a spacecraft in a low orbit around the Earth. It has been estimated that in this application, a data rate of 10 kb/s could be achieved at a ground-station-to-spacecraft distance of 320 km, using a laser power of only 100 mW. The basic system concept is also applicable to terrestrial free-space optical communications. The system (see figure) would include a diode laser at one end of the link (originally, the ground station) and a liquid-crystal- based retroreflecting modulator at the other end of the link (originally, the spacecraft). At the laser end, the beam to be transmitted would be made to pass through a quarter-wave plate, which would convert its linear polarization to right circular polarization. For transmission of data from the laser end to the retroreflector end, the laser beam would be modulated with subcarrier phase-shift keying (SC-PSK). The transmitted beam would then pass through an aperture- sharing element (ASE) - basically, a mirror with a hole in it, used to separate the paths of the transmitted and received light beams. The transmitted beam would continue outward through a telescope (which, in the original application, would be equipped with a spacecraft-tracking system) that would launch the transmitted beam along the free-space optical path to the retroreflector end.

Hazzard, D. A.↗

Metallic Rotor Sizing and Performance Model for Flywheel Systems

The NASA Glenn Research Center (GRC) is developing flywheel system requirements and designs for terrestrial and spacecraft applications. Several generations of flywheels have been designed and tested at GRC using in-house expertise in motors, magnetic bearings, controls, materials and power electronics. The maturation of a flywheel system from the concept phase to the preliminary design phase is accompanied by maturation of the Integrated Systems Performance model, where estimating relationships are replaced by physics based analytical techniques. The modeling can incorporate results from engineering model testing and emerging detail from the design process.

Moore, Camille J.↗

A study of rain effects on radar scattering from water waves

Results are presented from a laboratory investigation of microwave power return due to rain-generated short waves on a wind wave surface. The wind wave tank, sensor, and data processing methods used in the study are described. The study focuses on the response of a 36-GHz radar system, orientated 30 deg from nadir and pointing upwind, to surface waves generated by various combinations of rain and wind. The results show stronger radar signal levels due to short surface waves generated by rain impacting the wind wave surface, supporting the results of Moore et al. (1979) for a 14-GHz radar.

Bliven, Larry F.↗

Protein crystal growth and the International Space Station

Protein structural information plays a key role in understanding biological structure-function relationships and in the development of new pharmaceuticals for both chronic and infectious diseases. The Center for Macromolecular Crystallography (CMC) has devoted considerable effort studying the fundamental processes involved in macromolecular crystal growth both in a 1-g and microgravity environment. Results from experiments performed on more than 35 U.S. space shuttle flights have clearly indicated that microgravity can provide a beneficial environment for macromolecular crystal growth. This research has led to the development of a new generation of pharmaceuticals that are currently in preclinical or clinical trials for diseases such as cutaneous T-cell lymphoma, psoriasis, rheumatoid arthritis, AIDS, influenza, stroke and other cardiovascular complications. The International Space Station (ISS) provides an opportunity to have complete crystallographic capability on orbit, which was previously not possible with the space shuttle orbiter. As envisioned, the x-ray Crystallography Facility (XCF) will be a complete facility for growing protein crystals; selecting, harvesting, and mounting sample crystals for x-ray diffraction; cryo-freezing mounted crystals if necessary; performing x-ray diffraction studies; and downlinking the data for use by crystallographers on the ground. Other advantages of such a facility include crystal characterization so that iterations in the crystal growth conditions can be made, thereby optimizing the final crystals produced in a three month interval on the ISS.

STS Shuttle Project↗

Mid- and far-infrared spectroscopic studies of the influence of temperature, ultraviolet photolysis and ion irradiation on cosmic-type ices

Infrared (IR) studies of laboratory ices can provide information on the evolution of cosmic-type ices as a function of different simulated space environments involving thermal, ultraviolet (UV), or ion processing. Laboratory radiation experiments can lead to the formation of complex organic molecules. However, because of our lack of knowledge about UV photon and ion fluxes, and exposure lifetimes, it is not certain how well our simulations represent space conditions. Appropriate laboratory experiments are also limited by the absence of knowledge about the composition, density, and temperature of ices in different regions of space. Our current understanding of expected doses due to UV photons and cosmic rays is summarized here, along with an inventory of condensed-phase molecules identified on outer solar system surfaces, comets and interstellar grains. Far-IR spectra of thermally cycled H2O are discussed since these results reflect the dramatic difference between the amorphous and crystalline phases of H2O ice, the most dominant condensed-phase molecule in cosmic ices. A comparison of mid-IR spectra of products in proton-irradiated and UV-photolyzed ices shows that few differences are observed for these two forms of processing for the simple binary mixtures studied to date. IR identification of radiation products and experiments to determine production rates of new molecules in ices during processing are discussed. A new technique for measuring intrinsic IR band strengths of several unstable molecules is presented. An example of our laboratory results applied to Europa observations is included.

Spectrophotometry, Infrared/methods↗

Coastal zone color scanner 'system calibration': A retrospective examination

During its lifetime the Coastal Zone Color Scanner (CZCS) produced approximately 66,000 images. These have been placed in an archive of 'raw' radiance (sensor counts) in a subsampled format that is easily accessible. They have also been processed to form global fields, at reduced resolution, of normalized water-leaving radiance, phytoplankton pigments, and diffuse attenuation coefficient. Using this archive, we have tried to characterize some aspects of the 'system calibration' for the 8-year lifetime of CZCS. Specifically, we have assumed that the sensitivity of the red band decayed in a simple manner similar to the well-known long-term degradation of the shorter-wavelength bands, and we examined the sensitivity of the green and yellow bands by computing the globally averaged water-leaving radiance, over 10-day periods, for all of the imagery. The results provided evidence that in addition to the long-term degradation, short-term (2 weeks to 1 month) variations in the radiometric sensitivity of these bands started in early fall 1981 and continued for the rest of the mission. In contrast, the data suggested the absence of such variations prior to August 1981. It is reasonable to believe that the sensitivity of the blue (and probably the red) band underwent such variations as well; however our methodology cannot be used to study the other bands. Thus, after these fluctuations began, the actual values of CZCS - estimated pigment concentrations at a given location should be viewed with skepticism; however, the global patterns of derived pigment concentrations should be valid. Had an extensive set of surface measurements of water-leaving radiance, e.r., from moored buoyes or drifters, had been available during the CZCS mission, these fluctuations could have been removed from the data set, and this would have greatly increased its value. The lessons learned from CZCS that is, the requirement of good radiometric calibration and stability and the necessity of 'sea truth' stations to monitor the performance of the system (sensor plus algorithms), are being applied to the sea-viewing wide-field-of-view senso (Sea WiFS) scheduled for launch in August 1993.

Evans, Robert H.↗

Increasing Ligand Denticity and Stability for a Water Oxidation Electrocatalyst using P(V) as Connecting Element

Carboxylate complexes have risen to prominence in the field of water oxidation catalysis. Here for the first time we use the higher valence of phosphinates [P(V)] relative to that of carboxylates [C(IV)] to increase ligand denticity. We describe the synthesis and characterization of a new dianionic pentadentate ligand, bcpq 2− that contains a tridentate 2,2’-bipyridine-6-carboxylato moiety, in addition to a 6’-phosphinato substituent that acts as fourth ligand and bears a side arm containing a quinoline, the fifth ligand. The new bcpq ligand allows formation of [Ru(II)(bcpq)(L)] (2 a–b, L=picoline or isoquinoline) and in preliminary results, of a Co(II) complex. NMR spectroscopy, X-ray diffraction, cyclic voltammetry, differential pulse and square wave voltammetry were used to characterize 2 a–b, with 2 b being characterized more extensively as a catalyst. Bulk electrolysis over 15 h at pH 7 was also used, showing that 2 b gave 100±5 % faradaic efficiency and remained completely homogeneous, whereas 1 b was no longer homogeneous; this comparison conclusively shows the advantage of the added denticity in the electrocatalytic context. Replacing carboxylate with P(V) phosphinate with an added arm may be used in other ligand systems to enhance the durability of homogeneous catalysts.

14 SOLAR ENERGY↗

Neutron resonance transmission analysis prototype system for thorium fuel cycle safeguards

Emerging thorium-based reactor designs and fuel cycles present challenges to traditional non-destructive assay techniques used in international safeguards. Specifically, assaying the masses of 233 U and 235 U when they are present together in samples with high gamma ray backgrounds is difficult because of similar passive neutron signatures and relatively weak gamma-ray emissions of 233 U. The Pacific Northwest National Laboratory (PNNL) and the Massachusetts Institute of Technology (MIT) are developing a compact neutron resonance transmission analysis (NRTA) system as one potential solution to these challenges. The NRTA technique provides isotopic information for a sample via neutron time-of-flight (TOF) measurements that exploit a sample’s epithermal neutron resonance cross-sections. A recently developed portable NRTA system uses a commercially available, pulsed deuterium-tritium neutron generator with a ~2 m flight path and a GS20 lithium glass scintillator detector. Finally, this paper describes the prototype NRTA system design, a refined radiation transport model of the system, preliminary measurements with thorium and uranium sources, and demonstration of a quantitative isotopic estimation algorithm.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Validation of Special Sensor Microwave Imager monthly-mean wind speed from July 1987 to December 1989

Since July 1987, the Remote Sensing Systems (Santa Rosa, California) routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m/s. The rms difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m/s. The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes, the time series of rms differences displayed an annual cycle. In the equatorial zone, the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m/s, the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m/s, respectively.

Halpern, David↗

Global Aspects of Heliosphere-Geosphere Coupling

The magnetosphere serves both to hold off the solar wind and to couple it selectively to the Earth through the auroral zones. It has long been understood that the plasmasphere consists of geogenic plasmas that expand out of the sunlit low latitude ionosphere, but it was initially assumed that the hot low density plasma beyond the plasmasphere is largely of solar wind origin with a minor admixture of ionospheric plasmas, discovered via mass spectrometric observations in the early 70's. Since then, elaborate simulation models have been developed that have taken us from an era of cartoon physics to a new era of quantitative global comparisons between observations and theory. In most current global circulation models of the magnetosphere, the ionospheric load on the system is taken to lie exclusively in the thin F layer of the ionosphere. This layer is coupled with solar wind and magnetospheric plasmas via Maxwell stresses communicated by field aligned current systems, and with the thermosphere via ion-neutral charge exchange and Coulomb collisions. However, recent observations have shown us that ionospheric plasmas flow sporadically in various forms into the plasmasphere and up into the high latitude circulation cells of the outer magnetosphere, as driven by the solar wind and its variable intensity and magnetic field. Under some conditions, ionospheric material is observed to be the principal component of plasmas at the dayside magnetopause and in the plasma sheet and ring current regions. Given a global model of magnetospheric circulation, it is relatively straightforward to investigate the behaviors of ionospheric plasmas in response to solar wind drivers, and we report the results of such efforts here. We find that ionospheric plasmas dominate the plasma pressure in the magnetosphere in some regions, particularly when the solar wind is especially intense and-or southward directed. This result violates the assumption that the ionospheric load is confined to the F layer, and shows that the ionosphere is often an important dynamic element of the solar wind-ionosphere system throughout the magnetosphere, especially during larger geospace storms. This means that future global circulation models must account for ionospheric plasma inertia, heat capacity, and pressure, to be quantitatively credible.

Moore, Thomas E.↗

Practical Applications of Cables and Ropes in the ISS Countermeasures System

National Aeronautics and Space Administration (NASA) uses exercise countermeasures on the International Space Station (ISS) to maintain crew health and combat the negative effects of long-duration spaceflight on the human body. Most ISS exercise countermeasures system (CMS) equipment rely heavily on the use of textile and wire ropes to transmit resistive loads and provide stability in a microgravity environment. For a variety of reasons, including challenges in simulating microgravity environments for testing and limits on time available for life cycle testing, the textiles and wire ropes have contributed significantly to on-orbit planned and unplanned maintenance time. As a result, continued ground testing and on-orbit experience since the first expedition on the ISS in 2000 provide valuable data and lessons learned in materials selection, applications, and design techniques to increase service life of these ropes. This paper will present a review of the development and failure history of textile and wire ropes for four exercise countermeasure systems-the Treadmill with Vibration Isolation and Stabilization (TVIS) System, Cycle Ergometer with Vibration Isolation and Stabilization (CEVIS) System, Interim Resistive Exercise Device (IRED), and the Advanced Resistive Exercise Device (ARED)-to identify lessons learned in order to improve future systems. These lessons learned, paired with thorough testing on the ground, offer a forward path towards reduced maintenance time and up-mass for future space missions.

Svetlik, Randall G.↗

TPSAS-NF1676L-21952-DND

DISCOVER-AQ was a 4-year NASA project aimed to improve the interpretation of total column satellite observations to help diagnose near-surface conditions relating to air quality. During DISCOVER-AQ HSRL-2 was flown onboard the NASA Langley B200 King Air. A suite of in-situ instruments was flown onboard NASA Wallops P-3B aircraft which spiraled up and down over a number of ground stations. The two aircraft flew coordinated flight tracks, both flying over several designated ground stations with close time coincidence, allowing for colocation of measurements from the in situ instruments suite and the HSRL-2. HSRL-2 is the first multiwavelength airborne lidar system that provides profiles of 3β (backscatter)+2α(extinction),allowing the retrieval of microphysical parameters like number, surface-area, and volume concentrations, and effective radius.

Patricia Sawamura↗

Validation of Special Sensor Microwave Imager Monthly-Mean Wind Speed From July 1987 to December 1989

Since July 1987 the Remote Sensing Systems, Santa Rosa, California, routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m s^(-1). During 1987, the equatorial matchups were not equivalent with 1998 and 1989, and the cause remains unknown. The root-mean-square (rms) difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m s^(-1). The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes the time series of rms differences displayed an annual cycle. In the equatorial zone the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m s^(-1), the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m s^(-1), respectively.

Halpern, D.↗

Extended Duration: The SIRIUS 21 Crew Perspective

The SIRIUS (Scientific International Research In a Unique terrestrial Station) missions represent a collaborative effort between NASA and Russia’s Institute for Biomedical Problems (IBMP) to conduct a series of long duration isolation and confinement spaceflight analog missions. Three missions of 17-day, 4-month, and 8-month duration (SIRIUS 17, 19, and 21) have been completed at IBMP’s Ground-Based Experimental Complex / Nazemnyy eksperimental'nyy kompleks (NEK) in Moscow, Russia. The international SIRIUS 21 crew comprising representatives from the United States, United Arab Emirates and Russia recently completed the 8-month analog lunar mission. The extended duration mission included simulated lunar transit, orbital, and surface operations with corresponding deep space communication delay, during which the crew participated in nearly 70 studies, eight of which were sponsored by NASA’s Human Research Program. The studies examined the effect of isolation and confinement on the behavioral health of research subjects, and investigated medical countermeasures, team performance, crew dynamics, crew autonomy, food system risks, consequences of confinement and associated physiological stressors. SIRIUS 21 crewmembers also participated in operational tasks such as Rover and CubeSat assembly, simulated lunar sample assessment, VR activities, robotic arm training, environmental systems monitoring, exercise, greenhouse maintenance and 3D printing. Communication with Mission Control was limited to 30-minute periods every two hours. Since access to the internet and email was restricted, simulated ground support provided the Crew’s primary source of daily news and mission information. This panel discussion will include presentations from the US SIRIUS 21 crewmembers – William Brown and Ashley Kowalski – about their experience participating in the mission and science. A facilitated question and answer session will follow with attendees encouraged to ask questions and join in discussion with the SIRIUS 21 crewmembers about their experiences. William Brown came to SIRIUS 21 with experience spread across multiple industries, including the military, defense contracting, healthcare consulting, software engineering, and logistics. He has lived in the Middle East, Central Asia, and Russia. A former Boren Scholar, Brown is fluent in Russian. He holds a Master of International Business degree from the University of South Carolina’s Darla Moore School of Business. Prior to that, he earned a bachelor’s degree in Russian language, literature, and culture from the University of South Carolina. There, he also completed additional undergraduate coursework in computer science. Ashley Kowalski is a Project Leader in The Aerospace Corporation’s International Partnerships Department, where she works with, represents, and provides technical support to the the U.S. Space Force Space Systems Command International Affairs (SSC/IA) office. Through her numerous national and international assignments (Russia, China, and Germany), she has worked on topics related to international space systems, national security space systems, civil systems (including human spaceflight and civil launch projects), space policy, satellite industry analysis, and satellite manufacturing start-ups. She is proficient in Russian and German, and fluent in Polish. Kowalski received her Bachelor of Science and Master of Science degrees in mechanical and aerospace engineering from George Washington University in 2011 and 2012, respectively.

S. E. Whiting↗

Four-Spin Terms and the Origin of the Chiral Spin Liquid in Mott Insulators on the Triangular Lattice

At strong repulsion, the triangular-lattice Hubbard model is described by s=1/2 spins with nearest-neighbor antiferromagnetic Heisenberg interactions and exhibits conventional 120° order. Using the infinite density matrix renormalization group and exact diagonalization, we study the effect of the additional four-spin interactions naturally generated from the underlying Mott-insulator physics of electrons as the repulsion decreases. Although these interactions have historically been connected with a gapless ground state with emergent spinon Fermi surface, we find that, at physically relevant parameters, they stabilize a chiral spin liquid (CSL) of Kalmeyer-Laughlin (KL) type, clarifying observations in recent studies of the Hubbard model. Finally, we present a self-consistent solution based on a mean-field rewriting of the interaction to obtain a Hamiltonian with similarities to the parent Hamiltonian of the KL state, providing a physical understanding for the origin of the CSL.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tailored design of protein nanoparticle scaffolds for multivalent presentation of viral glycoprotein antigens

Multivalent presentation of viral glycoproteins can substantially increase the elicitation of antigen-specific antibodies. To enable a new generation of anti-viral vaccines, we designed self-assembling protein nanoparticles with geometries tailored to present the ectodomains of influenza, HIV, and RSV viral glycoprotein trimers. We first de novo designed trimers tailored for antigen fusion, featuring N-terminal helices positioned to match the C termini of the viral glycoproteins. Trimers that experimentally adopted their designed configurations were incorporated as components of tetrahedral, octahedral, and icosahedral nanoparticles, which were characterized by cryo-electron microscopy and assessed for their ability to present viral glycoproteins. Electron microscopy and antibody binding experiments demonstrated that the designed nanoparticles presented antigenically intact prefusion HIV-1 Env, influenza hemagglutinin, and RSV F trimers in the predicted geometries. This work demonstrates that antigen-displaying protein nanoparticles can be designed from scratch, and provides a systematic way to investigate the influence of antigen presentation geometry on the immune response to vaccination.

59 BASIC BIOLOGICAL SCIENCES↗

GGOS working group on ground networks and communications

Activities of this Working Group include the investigation of the status quo and the development of a plan for full network integration to support improvements in terrestrial reference frame establishment and maintenance, Earth orientation and gravity field monitoring, precision orbit determination, and other geodetic and gravimetric applications required for the long-term observation of global change. This integration process includes the development of a network of fundamental stations with as many co-located techniques as possible, with precisely determined intersystem vectors. This network would exploit the strengths of each technique and minimize the weaknesses where possible. This paper discusses the organization of the working group, the work done to date, and future tasks.

VLBI↗