Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moisture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

L-band radar sensing of soil moisture

The objectives of the experiment were to assess the performance of an L-band, 25-cm wavelength imaging synthetic aperture radar (SAR) for soil moisture determination, and to study the temporal variability of radar returns from a number of agricultural fields. A series of overflights was accomplished during March 1977 over an agricultural test site in Kern County, Calif. Soil moisture samples were collected from bare fields at nine sites at depths of 0-2, 2-5, 5-15, and 15-30 cm. These gravimetric measurements were converted to percent of field capacity for correlation to the radar return signal. The initial signal film was optically correlated and scanned to produce image data numbers. These numbers were then converted to relative return power by linear interpolation of the noise power wedge which was introduced in 5-dB steps into the original signal film before and after each data run. Results of correlations between the relative return power and percent of field capacity demonstrate that the relative return power from this imaging radar system is responsive to the amount of soil moisture in bare fields. The signal returned from dry and wet fields where furrowing is parallel to the radar beam differs by about 15 dB. Before this technique can be operationally employed, adequate calibration of the radar system is required to insure comparability of data both from area to area within a single flight and between different flights.

Chang, A. T. C.↗

Retrieval and use of high-resolution moisture and stability fields from Nimbus 6 HIRS radiances in pre-convective situations

A moisture-temperature retrieval scheme was developed for lower-tropospheric analysis and forecasting parameters from the Nimbus 6 High-resolution Infrared Radiation Sounder, in a study of convective development on the Great Plains of the U.S. on four case study days in August 1975. Dew points and temperatures, along with such secondary parameters as total precipitate water and static stability indices, were derived and analyzed at a horizontal resolution of up to 30 km on the four days. Convective development beginning 2.0-2.5 hours after the satellite pass at local noon was found to correlate well with local moisture and instability maxima seen in the satellite-derived analyses. A statistical structure analysis of the satellite-derived parameters gave the highest signal-to-noise values for the moisture and stability parameters, while the temperature parameters showed much lower signal-to-noise content.

Hillger, D. W.↗

Analysis of soil moisture extraction algorithm using data from aircraft experiments

A soil moisture extraction algorithm is developed using a statistical parameter inversion method. Data sets from two aircraft experiments are utilized for the test. Multifrequency microwave radiometric data surface temperature, and soil moisture information are contained in the data sets. The surface and near surface ( or = 5 cm) soil moisture content can be extracted with accuracy of approximately 5% to 6% for bare fields and fields with grass cover by using L, C, and X band radiometer data. This technique is used for handling large amounts of remote sensing data from space.

Burke, H. H. K.↗

A multi-frequency radiometric measurement of soil moisture content over bare and vegetated fields

A USDA Beltsville Agricultural Research Center site was used for an experiment in which soil moisture remote sensing over bare, grass, and alfalfa fields was conducted over a three-month period using 0.6 GHz, 1.4 GHz, and 10.6 GHz Dicke-type microwave radiometers mounted on mobile towers. Ground truth soil moisture content and ambient air and sil temperatures were obtained concurrently with the radiometric measurements. Biomass of the vegetation cover was sampled about once a week. Soil density for each of the three fields was measured several times during the course of the experiment. Results of the radiometric masurements confirm the frequency dependence of moisture sensing sensitivity reduction reported earlier. Observations over the bare, wet field show that the measured brightness temperature is lowest at 5.0 GHz and highest of 0.6 GHz frequency, a result contrary to expectation based on the estimated dielectric permittivity of soil water mixtures and current radiative transfer model in that frequency range.

Wang, J. R.↗

Instrumentation for sensing moisture content of material using a transient thermal pulse

Instrumentation is developed for sensing moisture content of material using a transient thermal pulse and is comprised of a sensing probe having a sensing element in the form of a ribbon excited by a constant current pulse to increase the temperature, and therefore the resistance, of the ribbon linearly. Moisture in web material limits the increase of temperature during the pulse in proportion to the moisture content. This increase in temperature produces a proportional increase in resistivity which is measured with a Wheatsone bridge as a change in voltage displayed by a measurement display unit. The probe is glued in a shallow groove of a lucite bar and connected to copper pins embedded in the bar.

Yang, L. C.↗

A comparison of soil moisture characteristics predicted by the Arya-Paris model with laboratory-measured data

Soil moisture characteristics predicted by the Arya-Paris model were compared with the laboratory measured data for 181 New Jersey soil horizons. For a number of soil horizons, the predicted and the measured moisture characteristic curves are almost coincident; for a large number of other horizons, despite some disparity, their shapes are strikingly similar. Uncertainties in the model input and laboratory measurement of the moisture characteristic are indicated, and recommendations for additional experimentation and testing are made.

Arya, L. M.↗

Development of tough, moisture resistant laminating resins

Tough, moisture resistant laminating resins for employment with graphite fibers were developed. The new laminating resins exhibited cost, handleability and processing characteristics equivalent to 394K (250 F) curing epoxies. The laminating resins were based on bisphenol A dicyanate and monofunctional cyanates with hydrophobic substituents. These resins sorb only small quantities of moisture at equilibrium (0.5% or less) with minimal glass transition temperature depression and represent an improvement over epoxies which sorb around 2% moisture at equilibrium. Toughening was accomplished by the precipitation of small diameter particles of butadiene nitrile rubber throughout the resin matrix. The rubber domains act as microcrack termini and energy dissipation sites, allowing increased stress accommodation prior to catastrophic failure. A unique blend of amine terminated butadiene nitrile elastomer (MW 2,000) and a high nitrile content butadiene nitrile rubber yielded the desired resin morphology.

Brand, R. A.↗

A moisture analysis procedure utilizing surface and satellite data

Four analyses have been produced by a moisture analysis procedure which uses satellite, precipitation and surface specific humidity data to augment the standard radiosonde observations (RAOB) of moisture: (1) using RAOB data only, (2) using RAOB data supplemented by data obtained from the surface observations of specific humidity, (3) using RAOB data supplemented only by satellite and precipitation data, and (4) employing all sources of data. Penn State University Mesoscale Model forecasts were performed to determine the effect of the high-resolution moisture analyses. For the data set used, supplementary satellite and rainfall data was found to improve the precipitation forecast more than surface humidity data and permitted the model to produce rain rates during the first four hours of the forecast that were 100% larger and more realistic than those produced without these data.

Wolcott, S. W.↗

Moisture analysis from radiosonde and microwave spectrometer data

A method for analysis of the horizontal and vertical distributions of the moisture field utilizing satellite, upper air and surface data is proposed in this paper. A brief overview of the microwave sensors on board Nimbus 5 and 6 is also presented. A technique is provided utilizing the radiosonde data sets to calibrate the satellite field of total precipitable water. Next, the calibrated satellite-derived field is utilized along with ship and coastal reports of moisture, and a vertical structure function to generate vertical distribution of moisture and thus provide a mapping of specific humidity at several levels in the troposphere. Utilizing these procedures, analyses for several case studies were performed. The resultant maps show detailed distribution of specific humidity along with some interesting climatological features. A reasonable acceptance of the available aerological data sets by the analysis scheme is demonstrated.

Haydu, K. J.↗

Effects of varying soil moisture contents and vegetation canopies on microwave emissions

Results of NASA airborne passive microwave scans of bare and vegetated fields for comparison with ground truth tests are discussed and a model for atmospheric scattering of radiation by vegetation is detailed. On-board radiometers obtained data at 21, 2.8, and 1.67 cm during three passes over each of 46 fields, 28 of which were bare and the others having wheat or alfalfa. Ground-based sampling included moisture in five layers down to 15 cm in addition to soil temperature. The relationships among the brightness temperature and soil moisture, as well as the surface roughness and the vegetation canopy were examined. A model was developed for the dielectric coefficient and volume scattering for a vegetation medium. L- to C-band data were found useful for retrieving soil information directly. A surface moisture content of 5-35% yielded an emissivity of 0.9-0.7. The data agreed well with a combined multilayer radiative transfer model with simple roughness correction.

Burke, H.-H. K.↗

Assessment of radar resolution requirements for soil moisture estimation from simulated satellite imagery

Radar simulations were performed at five-day intervals over a twenty-day period and used to estimate soil moisture from a generalized algorithm requiring only received power and the mean elevation of a test site near Lawrence, Kansas. The results demonstrate that the soil moisture of about 90% of the 20-m by 20-m pixel elements can be predicted with an accuracy of + or - 20% of field capacity within relatively flat agricultural portions of the test site. Radar resolutions of 93 m by 100 m with 23 looks or coarser gave the best results, largely because of the effects of signal fading. For the distribution of land cover categories, soils, and elevation in the test site, very coarse radar resolutions of 1 km by 1 km and 2.6 km by 3.1 km gave the best results for wet moisture conditions while a finer resolution of 93 m by 100 m was found to yield superior results for dry to moist soil conditions.

Ulaby, F. T.↗

Investigation of remote sensing techniques of measuring soil moisture

Major activities described include development and evaluation of theoretical models that describe both active and passive microwave sensing of soil moisture, the evaluation of these models for their applicability, the execution of a controlled field experiment during which passive microwave measurements were acquired to validate these models, and evaluation of previously acquired aircraft microwave measurements. The development of a root zone soil water and soil temperature profile model and the calibration and evaluation of gamma ray attenuation probes for measuring soil moisture profiles are considered. The analysis of spatial variability of soil information as related to remote sensing is discussed as well as the implementation of an instrumented field site for acquisition of soil moisture and meteorologic information for use in validating the soil water profile and soil temperature profile models.

Newton, R. W.↗

A computer program for the simulation of heat and moisture flow in soils

A computer program that simulates the flow of heat and moisture in soils is described. The space-time dependence of temperature and moisture content is described by a set of diffusion-type partial differential equations. The simulator uses a predictor/corrector to numerically integrate them, giving wetness and temperature profiles as a function of time. The simulator was used to generate solutions to diffusion-type partial differential equations for which analytical solutions are known. These equations include both constant and variable diffusivities, and both flux and constant concentration boundary conditions. In all cases, the simulated and analytic solutions agreed to within the error bounds which were imposed on the integrator. Simulations of heat and moisture flow under actual field conditions were also performed. Ground truth data were used for the boundary conditions and soil transport properties. The qualitative agreement between simulated and measured profiles is an indication that the model equations are reasonably accurate representations of the physical processes involved.

Camillo, P.↗

A numerical simulation of soil temperature and moisture variations for a bare field

The diurnal variations of soil temperature and moisture content were simulated for a bare agricultural field in the San Joaquin Valley in California. The simulation pertained to the first 72 hours of drying, from saturation, of a sandy, clay loam soil. The results were compared with measurements of soil temperature and moisture content made at the field. Calculated and measured values of soil temperature trends agreed in general, but model results of moisture trends did not replicate observed diurnal effects evident at depths 4 centimeters or more below the surface.

Schieldge, J. P.↗

The influence of ground moisture conditions in North America on summer climate as modeled in the GISS GCM

A new general circulation model, developed to run on a coarse grid (8 x 10 deg resolution) at the Goddard institute for Space Studies is employed to investigate the potential use of ground moisture anomalies for seasonal climate prediction. For three different summertime simulations, the ground moisture on 1 June over the United States is reduced to 1/4 of its value in the control run. The results show that the subsequent surface air temperature is significantly higher throughout most of the summer, while the precipitation decreases, especially in June and July. Knowledge of late spring ground moisture anomalies should thus be an aid in predicting summertime climate.

Rind, D.↗

Multifrequency microwave radiometer measurements of soil moisture

Ground-based microwave radiometer experiments are carried out to investigate the effects of moisture, temperature, and roughness on microwave emission from bare soils. The measurements are made at frequencies of 0.6-0.9, 1.4, and 10.7 GHz using van-mounted radiometers to observe prepared soil sites in Kern County, CA. Brightness temperature variations of approximately 15 K at 1.4 GHz and 25 K at 10.7 GHz are observed as a result of diurnal changes in the soil temperature. Increasing the soil moisture content from 2% to 15% by volume is found to result in brightness temperature decreases of approximately 70 K at 0.775 and 1.4 GHz and 40 K at 10.7 GHz, depending, to a lesser extent, on polarization and viewing angle. The results attest the significance of soil temperature in deriving soil moisture from microwave radiometer measurements. Comparisons of the microwave measurements with theoretical predictions using smooth surface models give reasonable agreement and support previous results of this nature obtained with other soil types.

Njoku, E. G.↗

Multifrequency measurements of the effects of soil moisture, soil texture, and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4, 5, and 10.7 GHz, during July-September of 1981. Three bare fields with different surface roughnesses and soil textures were prepared for the experiment. The experimental results show that the effect of surface roughness is to increase the soil's brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable and the effect of soil texture is reflected in the difference of regression line intercepts at brightness-temperature axis. Measurements on wet smooth bare fields give lower brightness temperatures at 5 than at 1.4 GHz. This phenomenon is not expected from current radiative transfer theory, using laboratory measurements of the relationship between permittivity and moisture content for different soil-water mixtures at frequencies of not greater than 5 GHz.

Wang, J. R.↗

Effects of vegetation cover on the microwave radiometric sensitivity to soil moisture

The reduction in sensitivity of the microwave brightness temperature to soil moisture content due to vegetation cover is analyzed using airborne observations made at 1.4 and 5 GHz. The data were acquired during six flights in 1978 over a test site near Colby, Kansas. The test site consisted of bare soil, wheat stubble, and fully mature corn fields. The results for corn indicate that the radiometric sensitivity to soil moisture S decreases in magnitude with increasing frequency and with increasing angle of incidence (relative to nadir). The sensitivity reduction factor, defined in terms of the radiometric sensitivities for bare soil and canopy-covered conditions Y = 1 - Scan/Ss was found to be equal to 0.65 for normal incidence at 1.4 GHz, and increases to 0.89 at 5 GHz. These results confirm previous conclusions that the presence of vegetation cover may pose a serious problem for soil moisture detection with passive microwave sensors.

Ulaby, F. T.↗