Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methane conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Ga and In modified ceria as supports for cobalt-catalyzed Fischer-Tropsch synthesis

Ga- and In-modified ceria (Ce 0.8 Ga 0.2 O 2 , Ce 0.8 In 0.2 O 2 ) materials were used as supports for cobalt-catalyzed Fischer-Tropsch synthesis (FTS). The addition of Ga to ceria was found to improve CO conversion for cobalt-catalyzed FTS, while the addition of In tended to decrease it. A similar trend was observed with the Ag-promoted cobalt/ceria catalysts. Doping of ceria with Ga or In decreased methane and increased the selectivity to olefins and alcohols for Ag-promoted cobalt/ceria. The sum of the products of olefins and alcohols for various catalysts exhibited a decreasing trend as follows: Ag-Co/Ce-Ga > Ag-Co/Ce-In > Ag-Co/Ce. Results of H 2 -TPR-XANES showed that adding of Ga or In to ceria increases the fraction of Ce 3+ in the surface shell for both unpromoted and Ag-promoted catalysts in the range of temperature typical of catalyst activation. In conclusion, this partially reduced ceria plays an important role in controlling the product selectivity of cobalt-catalyzed FT synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Clean fuels from biomass

The paper discusses the U.S. resources to provide fuels from agricultural products, the present status of conversion technology of clean fuels from biomass, and a system study directed to determine the energy budget, and environmental and socioeconomic impacts. Conversion processes are discussed relative to pyrolysis and anaerobic fermentation. Pyrolysis breaks the cellulose molecules to smaller molecules under high temperature in the absence of oxygen, wheras anaerobic fermentation is used to convert biomass to methane by means of bacteria. Cost optimization and energy utilization are also discussed.

Hsu, Y.-Y.↗

Performance Analysis of a Biomass Gasifier Genset at Varying Operating Conditions

Abstract. An All Power Labs PP20 gasifier generation set (Berkeley, Calif.) was tested to evaluate its suitability for powering biomass conversion technologies (BCT) at remote forest operations sites. Feedstock of the species tanoak (), coast redwood (), and Douglas fir () were tested at moisture contents of 15% and 25% (wet basis). The PP20 was connected to a load bank with five different load profiles designed to simulate possible BCT loads. Two parameters of power quality, voltage variability, and frequency deviation, were determined to be within acceptable limits. The unit also successfully powered a remote biochar operation in Branscomb, California. Emissions of the PP20, when compared to diesel generator regulations, would meet non-methane hydrocarbons (NMHC) and NO X requirements but exceed the CO emissions limits by a factor of ten. The CO emissions could be reduced by adding a catalytic converter. The results indicate that it is possible to use a PP20 unit to provide electric power for the highly variable loads of a BCT system. Keywords: Bioenergy, Biomass conversion technology, Gasification, Renewable energy.

Agriculture↗

Comment on Improved CO 2 Hydrogenation on Ni–ZnO/MCM-41 Catalysts with Cooperative Ni and ZnO Sites

A recent publication from Murthy et al.1 describes experiments in which they proposed the hypothesis that a bifunctional catalyst consisting of adlineated,2 nanometer-sized domains of Ni and ZnO, confined within the pores of MCM-41, hydrogenates carbon dioxide adsorbed on the ZnO using hydrogen atoms produced by the Ni-catalyzed dissociation of H2. The reanalysis of their data presented below suggests that the reaction rates they employed to test their hypothesis, when properly normalized, show little to no effect of bifunctionality. This closer inspection of their data raises the possibility that the observed effects may instead arise from experimental artifacts (e.g., different levels of conversion, finite rates of mass transport) or morphological correlations that were not considered by the authors.

36 MATERIALS SCIENCE↗

Technoeconomic Model and Pathway to <$2/kg Green Hydrogen Using Integrated Halide Perovskite Photoelectrochemical Cells

The cost of gray hydrogen produced via fossil fuel-based steam-methane reforming has led the U.S. Department of Energy to specify <$\$$2/kg H 2 as a target for commercially competitive green hydrogen generation methods. Integrated photoelectrochemical cells have been proposed as a solar-to-hydrogen conversion technology. In this paper we describe a technoeconomically feasible pathway to reaching <$\$$2/kg green H 2 using integrated photoelectrochemical cells with halide perovskite photoabsorbers, low-cost conductive barriers, and low precious metal-content catalysts in an aqueous, membrane-separated cell. A base-case solar-to-hydrogen conversion efficiency of 20%, stable lifetime of 10 years, and a combined electrocatalyst-plus-panel cost of $\$$50/m 2 enabled a levelized cost of hydrogen of $\$$2.43/kg, which dropped below $\$$2/kg with improved performance metrics including material cost, improvements in process design, or subsidies. We relate these metrics to lab-scale reports to recommend best research practices for scientists and funding agencies working at this intersection of photovoltaics, electrocatalysis, and surface science.

$1/kg↗

Gallionella and Sulfuricella populations are dominant during the transition of boreal potential to actual acid sulfate soils

Acid sulfate soils release metal laden, acidic waters that affect the environment, buildings, and human health. In this study, 16S rRNA gene amplicons, metagenomes, and metatranscriptomes all demonstrated distinct microbial communities and activities in the unoxidized potential acid sulfate soil, the overlying transition zone, and uppermost oxidized actual acid sulfate soil. Assembled genomes and mRNA transcripts also suggested abundant oxidized acid sulfate soil populations that aligned within the Gammaproteobacteria and Terracidiphilus. In contrast, potentially acid tolerant or moderately acidophilic iron oxidizing Gallionella and sulfur metabolizing Sulfuricella dominated the transition zone during catalysis of metal sulfide oxidation to form acid sulfate soil. Finally, anaerobic oxidation of methane coupled to nitrate, sulfate, and ferric reduction were suggested to occur in the reduced parent sediments. In conclusion, despite comparable metal sulfide dissolution processes e.g., biomining, Gallionella and Sulfuricella dominated the community and activities during conversion of potential to actual acid sulfate soils.

59 BASIC BIOLOGICAL SCIENCES↗

Engineering New Catalysts for In-Process Elimination of Tars

The key objective of this project was to develop a new and more efficient methodology for engineering and economically producing optimized robust catalysts for the reduction or elimination of tars in biomass gasification. Whereas current catalyst technology typically disposes thin layers of catalytically-active material onto rigid supports via wet chemistry-based methods, this project investigated novel thermal methods for directly incorporating catalytically active materials onto robust supports as well as novel approaches for incorporating catalytically active materials on and/or within an otherwise inert refractory support material which is then subsequently formed and processed to create a catalytically-active material on all exposed surfaces. Specifically, the focus of this engineered catalyst development was on materials which were derived from, or otherwise related to, olivine-like minerals, due to the inherent attrition resistance and moderate catalytic properties exhibited by natural olivine when used in a fluidized bed biomass gasifier. Task 1 of this project successfully demonstrated the direct thermal impregnation of catalytically-active materials onto an olivine substrate, with the production of a Ni-olivine catalyst. Nickel and nickel oxide were thermally impregnated onto an olivine substrate and when reduced were shown to demonstrate improved catalytic activity over the baseline olivine material and equal the tar-decomposing performance of Ni-olivine catalysts prepared by conventional wet impregnation. Task 2 involved coordination with our subcontracted project partners to further develop and characterize catalyst formulations and to optimize activity and production methods. Within this task, several significant new materials were developed. NexTech Materials developed a sintered ceramic nickel-magnesium-silicate catalyst that demonstrated superb catalytic activity and high resistance to deactivation by H2S. Alfred University developed both supported and integrated (bulk) catalysts via a glass-ceramic processing route which were shown to exhibit excellent catalytic activity and superior resistance to attrition deactivation. With the discovery of these active, robust, glass-based catalysts, and with the permission of the project officer, the investigation of waste-based materials as originally proposed for Task 3 and pilot-scale testing proposed in Task 5 were deferred indefinitely in favor of further investigation of the glass-ceramic based catalyst materials. This choice was justified in part because during FY 2006 and through FY 2007, funding restrictions imposed by congressional budget choices significantly reduced funding for DOE biomass-related projects. Funding for this project was limited to what had been authorized which slowed the pace of project work at GTI so that our project partners could continue in their work. Thereafter, project work was allowed to resume and with restored funding, the project continued and concentrated on the development and testing of glass-ceramic catalysts in bulk or supported formats. Work concluded with a final development devoted to increasing the surface area of glass-ceramic catalysts in the form of microspheres. Following that development, project reporting was completed and the project was concluded.

03 NATURAL GAS↗

Engineering Synthetic Anaerobic Consortia Inspired by the Rumen for Biomass Breakdown and Conversion

Lignocellulosic plant biomass is a widely-abundant renewable resource that can be harnessed for value-added production of fuels & chemicals. While microbes have been engineered to breakdown lignocellulose and turn released sugars into products, this remains an energy-intensive process that requires expensive pre-treatment and separation steps. Furthermore, it is difficult to engineer all desirable traits for breakdown and conversion into one organism. This project developed a new strategy that relies on microbial partnerships formed in the herbivore rumen to liberate sugars from crude plant biomass and convert that sugar to value-added chemicals. Microbial consortia consisting of fungi, bacteria, and archaea form tight associations in the herbivore rumen, which divide-and-conquer the difficult tasks of biomass breakdown. This project leveraged a “synthetic rumen” consortium composed of anaerobic fungi and chain-elongating bacteria to study which metabolites are shared and exchanged between microbes and identify strategies to bolster lignocellulose conversion to value-added products. Our approach developed high-throughput systems and synthetic biology approaches to realize stable synthetic consortia that route lignocellulosic carbon into short and medium chain fatty acids (SCFAs/MCFAs) rather than methane. Key research objectives were to (1) design and predict anaerobic fungal and bacterial consortia that efficiently convert lignocellulosic biomass into medium-chain fatty acids (MCFAs), (2) understand how fermentation parameters and microbe-microbe interactions regulate and drive microbiome metabolic fluxes, and (3) use genomic editing to alter the fermentation byproducts of anaerobic fungi and bolster MCFA titers and yields.

09 BIOMASS FUELS↗

Structural, microstructural and surface properties of a specific CeO{sub 2}-Bi{sub 2}O{sub 3} multiphase system obtained at 600 {sup o}C

Polycrystalline samples of (1-x) CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 {sup o}C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0{<=}x{<=}0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T' (or {beta}') and T (or {beta}) tetragonal phases, similar to the well-known {beta}' or {beta} Bi{sub 2}O{sub 3} metastable structural varieties, are observed. However, the crystal cell volumes of these {beta}' or {beta} Bi{sub 2}O{sub 3} phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH{sub 4} and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH{sub 4} and CO gases into the CO{sub 2} gas. The transformations of CH{sub 4} and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO{sub 2} absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH{sub 4} gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows. -- Graphical abstract: Catalytic efficiencies of CeO{sub 2}-Bi{sub 2}O{sub 3}system: catalytic actions on methane (on the left) or carbon monoxide (on the right) of (1-x)CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} samples, as a function of the fraction x, and for fixed temperatures: on the vertical axis, the intensities of CO{sub 2} FTIR absorption bands are reported. Strong efficiency of bismuth rich samples for CO conversion. Display Omitted Research highlights: {yields} Stabilization of metastable polymorph Bi{sub 2}O{sub 3} phases in the mix system [(1-x)CeO{sub 2}+(x/2)Bi{sub 2}O{sub 3}] at 600 {sup o}C. {yields} Solid gas interactions between this system and air-CO or air-CH{sub 4} gas flows at various temperatures and bismuth compositions. {yields} High efficiency of bismuth rich samples to convert CO into CO{sub 2}.

36 MATERIALS SCIENCE↗

Lattice Strained Ni-Co alloy as a High-Performance Catalyst for Catalytic Dry Reforming of Methane

Dry reforming of methane (DRM) is an effective route to convert methane and carbon dioxide to syngas. IN this work, we report an efficient nickel cobalt bimetallic catalyst with an activity of 4.97 mol CH4 mol Ni -1 s -1 at 800 °C. It is active at low temperature as well, and near thermodynamic equilibrium conversion was achieved as low as 350 °C, with a high yield of H 2 implying inhibition of side reactions: i.e., a reverse water-gas shift (RWGS) reaction. The formation of Ni-Co alloy during the reaction was observed, and its lattice contraction was revealed by HAADF-STEM and EXAFS experiments. The lattice-strained Ni-Co alloy has good CO 2 dissociation ability, which is responsible for its superior catalytic performance. Its weak chemisorption with H 2 results in inhibition of RWGS side reactions. This research is helpful in the design and development of other metal alloy materials with novel structures and/or electronic configurations for catalytic applications.

36 MATERIALS SCIENCE↗

Climate balance of biogas upgrading systems

One of the numerous applications of renewable energy is represented by the use of upgraded biogas where needed by feeding into the gas grid. The aim of the present study was to identify an upgrading scenario featuring minimum overall GHG emissions. The study was based on a life-cycle approach taking into account also GHG emissions resulting from plant cultivation to the process of energy conversion. For anaerobic digestion two substrates have been taken into account: (1) agricultural resources and (2) municipal organic waste. The study provides results for four different upgrading technologies including the BABIU (Bottom Ash for Biogas Upgrading) method. As the transport of bottom ash is a critical factor implicated in the BABIU-method, different transport distances and means of conveyance (lorry, train) have been considered. Furthermore, aspects including biogas compression and energy conversion in a combined heat and power plant were assessed. GHG emissions from a conventional energy supply system (natural gas) have been estimated as reference scenario. The main findings obtained underlined how the overall reduction of GHG emissions may be rather limited, for example for an agricultural context in which PSA-scenarios emit only 10% less greenhouse gases than the reference scenario. The BABIU-method constitutes an efficient upgrading method capable of attaining a high reduction of GHG emission by sequestration of CO{sub 2}.

09 BIOMASS FUELS↗

Simulating the Geological Fate of Terrestrial Organic Matter: Lignin vs Cellulose

While shale gas has become a major source of energy, a more sustainable recovery requires a better understanding of the gas/kerogen matrix interactions. Here, we use replica exchange molecular dynamics to investigate the geological conversion of two important classes of gas-forming constituents of the terrestrial organic matter: lignin and cellulose. In agreement with results from pyrolysis experiments, we show that lignin produces twice as much kerogen and 5 times more methane than cellulose. In addition, while ex-cellulose kerogen is relatively stiff and almost nonporous, ex-lignin kerogen, despite having a very similar composition and bonding, is an order of magnitude more compliant due to the presence of large micropores. The obtained results can potentially improve the nanoscale brick of bottom-up models of shale gas recovery.

58 GEOSCIENCES↗

In vivo activation of methyl-coenzyme M reductase by carbon monoxide

Methyl-coenzyme M reductase (MCR) from methanogenic archaea catalyzes the rate-limiting and final step in methane biosynthesis. Using coenzyme B as the two-electron donor, MCR reduces methyl-coenzyme M (CH3-SCoM) to methane and the mixed disulfide, CoBS-SCoM. MCR contains an essential redox-active nickel tetrahydrocorphinoid cofactor, Coenzyme F430, at its active site. The active form of the enzyme (MCRred1) contains Ni(I)-F430. Rapid and efficient conversion of MCR to MCRred1 is important for elucidating the enzymatic mechanism, yet this reduction is difficult because the Ni(I) state is subject to oxidative inactivation. Furthermore, no in vitro methods have yet been described to convert Ni(II) forms into MCRred1. Since 1991, it has been known that MCRred1 from Methanothermobacter marburgensis can be generated in vivo when cells are purged with 100% H2. Here we show that purging cells or cell extracts with CO can also activate MCR. The rate of in vivo activation by CO is about 15 times faster than by H2 (130 and 8 min-1, respectively) and CO leads to twofold higher MCRred1 than H2. Unlike H2-dependent activation, which exhibits a 10-h lag time, there is no lag for CO-dependent activation. Based on cyanide inhibition experiments, carbon monoxide dehydrogenase is required for the CO-dependent activation. Formate, which also is a strong reductant, cannot activate MCR in M. marburgensis in vivo.

enzyme activation↗

Analysis of Volatile Compounds from CO2 Removal Systems

One of the primary concerns when designing CO2 scrubber systems that will be integrated with a Sabatier reactor to produce water and methane is the amount of water released from the scrubber. Because the gas stream entering a Sabatier reactor must be compressed, water entering the reactor can condense and compromise the integrity of the system, thus rendering its valuable conversion capability useless. When the Johnson Space Center Environmental Chemistry Laboratory was tasked to develop an assay to quantify the water concentration in air samples from CO2 scrubbers, additional testing was also performed to see if any other compounds were being concentrated on the scrubbers. It was thought that the efficiency of the scrubber systems could be quantified by comparing the differences in samples from the ambient air on the International Space Station (ISS) to the exit gas of the scrubber. As this analysis was carried out, it became evident that the concentrations of certain volatile compounds were higher in the samples from the scrubbers than they were in nominal environmental samples. This meant these compounds were being retained and concentrated on the scrubber beds. Based on this finding, concerns were raised about their potential for these compounds to poison the Sabatier reactor. Further investigation was required to identify these compounds due to their high concentrations and unique matrix of the CO2 scrubber exhaust. This paper describes these events as well as the process that was developed to identify the volatile compounds that increased. An examination of how much the certain compounds can be concentrated by the scrubber systems is also included.

Volatiles↗

Analysis of Volatile Compounds From CO2 Removal Systems

One of the primary concerns when designing CO2 scrubber systems that will be integrated with a Sabatier reactor to produce water and methane is the amount of water released from the scrubber. Because the gas stream entering a Sabatier reactor must be compressed, water entering the reactor can condense and compromise the integrity of the system, thus rendering its valuable conversion capability useless. When the Johnson Space Center Environmental Chemistry Laboratory was tasked to develop an assay to quantify the water concentration in air samples from CO2 scrubbers, additional testing was also performed to see if any other compounds were being concentrated on the scrubbers. It was thought that the efficiency of the scrubber systems could be quantified by comparing the differences in samples from the ambient air on the International Space Station (ISS) to the exit gas of the scrubber. As this analysis was carried out, it became evident that the concentrations of certain volatile compounds were higher in the samples from the scrubbers than they were in nominal environmental samples. This meant these compounds were being retained and concentrated on the scrubber beds. Based on this finding, concerns were raised about their potential for these compounds to poison the Sabatier reactor. Further investigation was required to identify these compounds due to their high concentrations and unique matrix of the CO2 scrubber exhaust. This paper describes these events as well as the process that was developed to identify the volatile compounds that increased. An examination of how much the certain compounds can be concentrated by the scrubber systems is also included.

Volatiles↗

Fuel from wastewater : harnessing a potential energy source in Canada through the co-location of algae biofuel production to sources of effluent, heat and CO2.

Sandia National Laboratories is collaborating with the National Research Council (NRC) Canada and the National Renewable Energy Laboratory (NREL) to develop a decision-support model that will evaluate the tradeoffs associated with high-latitude algae biofuel production co-located with wastewater, CO2, and waste heat. This project helps Canada meet its goal of diversifying fuel sources with algae-based biofuels. The biofuel production will provide a wide range of benefits including wastewater treatment, CO2 reuse and reduction of demand for fossil-based fuels. The higher energy density in algae-based fuels gives them an advantage over crop-based biofuels as the 'production' footprint required is much less, resulting in less water consumed and little, if any conversion of agricultural land from food to fuel production. Besides being a potential source for liquid fuel, algae have the potential to be used to generate electricity through the burning of dried biomass, or anaerobically digested to generate methane for electricity production. Co-locating algae production with waste streams may be crucial for making algae an economically valuable fuel source, and will certainly improve its overall ecological sustainability. The modeling process will address these questions, and others that are important to the use of water for energy production: What are the locations where all resources are co-located, and what volumes of algal biomass and oil can be produced there? In locations where co-location does not occur, what resources should be transported, and how far, while maintaining economic viability? This work is being funded through the U.S. Department of Energy (DOE) Biomass Program Office of Energy Efficiency and Renewable Energy, and is part of a larger collaborative effort that includes sampling, strain isolation, strain characterization and cultivation being performed by the NREL and Canada's NRC. Results from the NREL / NRC collaboration including specific productivities of selected algal strains will eventually be incorporated into this model.

03 NATURAL GAS↗

Sensitizing effects of NO{sub x} on CH{sub 4} oxidation at high pressure

The CH{sub 4}/O{sub 2}/NO{sub x} system is investigated in a laboratory-scale high pressure laminar flow reactor with the purpose of elucidating the sensitizing effects of NO{sub x} on CH{sub 4} oxidation at high pressures and medium temperatures. Experiments are conducted at 100, 50, and 20 bar, 600-900 K, and stoichiometric ratios ranging from highly reducing to oxidizing conditions. The experimental results are interpreted in terms of a detailed kinetic model drawn from previous work of the authors, including an updated reaction subset for the direct interactions of NO{sub x} and C{sub 1-2} hydrocarbon species relevant to the investigated conditions. The results reveal a significant decrease in the initiation temperature upon addition of NO{sub x}. A similar effect is observed with increasing pressure. The sensitizing effect of NO{sub x} is related to the hydrocarbon chain-propagating NO/NO{sub 2} cycle operated by NO{sub 2}+CH{sub 3}{r_reversible}NO+CH{sub 3}O and NO+CH{sub 3}OO{r_reversible}NO{sub 2}+CH{sub 3}O as well as the formation of chain-initiating OH radicals from interactions between NO/NO{sub 2} and the H/O radical pool. At low temperatures, reactions between NO/NO{sub 2} and CH{sub 3}O/CH{sub 2}O also gain importance. The results indicate a considerable intermediate formation of nitromethane (CH{sub 3}NO{sub 2}) as a characteristic high-pressure phenomenon. The formation of CH{sub 3}NO{sub 2} represents an inactivation of NO{sub x}, which may result in a temporary reduction of the overall hydrocarbon conversion rate. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Study on the Effect of Thermal Boundary Conditions and Axial Aspect Ratio on Catalytic Oxidative Coupling of Methane

Packed-bed reactor models with a large reactor-diameter-to-particle-diameter ratio (N > 10) are commonly used in catalysis research. Their use is underpinned by strong simplifying assumptions including unidirectional plug flow, negligible radial gradients, small axial diffusion, and isothermal operation. However, the complex exothermic–endothermic nature of reactions like oxidative coupling of methane (OCM) coupled with heat transfer from the catalyst surface and convective heat losses from the reactor wall provides an interesting case study to evaluate packed-bed assumptions and understand axial and radial temperature variations that may impact conversion and selectivity. This computational study investigates the effect of thermal boundary conditions on catalyst performance in laboratory OCM reactors (N = ~13) through computational fluid dynamics (CFD) simulation. Further, the 1-D model typically used for modeling plug flow reactors assumes negligible radial temperature and species concentration gradients. This assumption is evaluated for OCM reactors over a range of geometric axial aspect ratios, defined as the reactor length divided by the diameter, comparing the 1-D with 3-D CFD results. 1-D model predictions of catalyst performance start to deviate from the 3-D model predictions as the axial aspect ratio decreases, specifically as diameter increases at constant length. In the work, the 1-D model assumption is only found to be valid for axial aspect ratios higher than 1.6, a result considered to be relevant for all exothermic catalytic reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗