SEARCH · Engineering Papers

Results for “maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Distributions of He(+) at middle and equatorial latitudes during solar maximum

The properties of the plasma composition in the topside ionosphere between 15 and 35 deg magnetic latitude are examined. Calculations are used to show that the distribution of neutral species at solar maximum, together with the appropriate ionization rates, can readily account for the dominance of He(+) at midlatitudes. The relative abundance of the atmospheric species is a sensitive function of local time and the associated evolution of the topside O(+) concentration profile. The existence of an ExB drift motion of the plasma is needed to explain the He(+) minimum at the dip equator. While the He(+) concentration there is produced in one day against the chemical loss process, at midlatitudes a large flux tube volume provides a reservoir in which the He(+) can accumulate each day.

Heelis, R. A.↗

NASA NTRS1990

Low-latitude thermospheric neutral winds determined from AE-E measurements of the 6300-A nightglow at solar maximum

Atmosphere Explorer E (AE-E) measurements of the O(1D) 6300-A emission in the nighttime equatorial thermosphere are used to infer the height of the F2 layer peak as a function of latitude and local time. The investigation is conducted both for northern hemisphere winter solstice and for spring equinox, under solar maximum conditions. The layer heights are used to derive magnetic meridional components of the transequatorial neutral wind, in conjunction with the MSIS-86 model and previous Jicamarca incoherent scatter measurements of the zonal electric field. The AE-E wind estimates indicate a predominant summer to winter flow for the winter solstice case. Comparisons are made with the empirical horizontal wind model HWM87 and with winds generated by the thermospheric general circulation model. The model predictions and experimental results are generally in good agreement, confirming the applicability of visible airglow data to studies of the global neutral wind pattern.

Burrage, M. D.↗

NASA NTRS1990

Maximum likelihood tuning of a vehicle motion filter

This paper describes the use of maximum likelihood parameter estimation unknown parameters appearing in a nonlinear vehicle motion filter. The filter uses the kinematic equations of motion of a rigid body in motion over a spherical earth. The nine states of the filter represent vehicle velocity, attitude, and position. The inputs to the filter are three components of translational acceleration and three components of angular rate. Measurements used to update states include air data, altitude, position, and attitude. Expressions are derived for the elements of filter matrices needed to use air data in a body-fixed frame with filter states expressed in a geographic frame. An expression for the likelihood functions of the data is given, along with accurate approximations for the function's gradient and Hessian with respect to unknown parameters. These are used by a numerical quasi-Newton algorithm for maximizing the likelihood function of the data in order to estimate the unknown parameters. The parameter estimation algorithm is useful for processing data from aircraft flight tests or for tuning inertial navigation systems.

Trankle, Thomas L.↗

NASA NTRS1990

Analysis of the flight dynamics of the Solar Maximum Mission (SMM) off-sun scientific pointing

Algorithms are presented which were created and implemented by the Goddard Space Flight Center's (GSFC's) Solar Maximum Mission (SMM) attitude operations team to support large-angle spacecraft pointing at scientific objectives. The mission objective of the post-repair SMM satellite was to study solar phenomena. However, because the scientific instruments, such as the Coronagraph/Polarimeter (CP) and the Hard X-ray Burst Spectrometer (HXRBS), were able to view objects other than the Sun, attitude operations support for attitude pointing at large angles from the nominal solar-pointing attitudes was required. Subsequently, attitude support for SMM was provided for scientific objectives such as Comet Halley, Supernova 1987A, Cygnus X-1, and the Crab Nebula. In addition, the analysis was extended to include the reverse problem, computing the right ascension and declination of a body given the off-Sun angles. This analysis led to the computation of the orbits of seven new solar comets seen in the field-of-view (FOV) of the CP. The activities necessary to meet these large-angle attitude-pointing sequences, such as slew sequence planning, viewing-period prediction, and tracking-bias computation are described. Analysis is presented for the computation of maneuvers and pointing parameters relative to the SMM-unique, Sun-centered reference frame. Finally, science data and independent attitude solutions are used to evaluate the larg-angle pointing performance.

Pitone, D. S.↗

NASA NTRS1990

Temperature dependence of attitude sensor coalignments on the Solar Maximum Mission (SMM)

The temperature correlation of the relative coalignment between the fine-pointing sun sensor and fixed-head star trackers measured on the Solar Maximum Mission (SMM) is analyzed. An overview of the SMM, including mission history and configuration, is given. Possible causes of the misalignment variation are discussed, with focus placed on spacecraft bending due to solar-radiation pressure, electronic or mechanical changes in the sensors, uncertainty in the attitude solutions, and mounting-plate expansion and contraction due to thermal effects. Yaw misalignment variation from the temperature profile is assessed, and suggestions for spacecraft operations are presented, involving methods to incorporate flight measurements of the temperature-versus-alignment function and its variance in operational procedures and the spacecraft structure temperatures in the attitude telemetry record.

Pitone, D. S.↗

NASA NTRS1990

User's guide: Nimbus-7 Earth radiation budget narrow-field-of-view products. Scene radiance tape products, sorting into angular bins products, and maximum likelihood cloud estimation products

The archived Earth radiation budget (ERB) products produced from the Nimbus-7 ERB narrow field-of-view scanner are described. The principal products are broadband outgoing longwave radiation (4.5 to 50 microns), reflected solar radiation (0.2 to 4.8 microns), and the net radiation. Daily and monthly averages are presented on a fixed global equal area (500 sq km), grid for the period May 1979 to May 1980. Two independent algorithms are used to estimate the outgoing fluxes from the observed radiances. The algorithms are described and the results compared. The products are divided into three subsets: the Scene Radiance Tapes (SRT) contain the calibrated radiances; the Sorting into Angular Bins (SAB) tape contains the SAB produced shortwave, longwave, and net radiation products; and the Maximum Likelihood Cloud Estimation (MLCE) tapes contain the MLCE products. The tape formats are described in detail.

Kyle, H. Lee↗

NASA NTRS1990

Attitude sensor alignment calibration for the solar maximum mission

An earlier heuristic study of the fine attitude sensors for the Solar Maximum Mission (SMM) revealed a temperature dependence of the alignment about the yaw axis of the pair of fixed-head star trackers relative to the fine pointing Sun sensor. Here, new sensor alignment algorithms which better quantify the dependence of the alignments on the temperature are developed and applied to the SMM data. Comparison with the results from the previous study reveals the limitations of the heuristic approach. In addition, some of the basic assumptions made in the prelaunch analysis of the alignments of the SMM are examined. The results of this work have important consequences for future missions with stringent attitude requirements and where misalignment variations due to variations in the temperature will be significant.

Pitone, Daniel S.↗

NASA NTRS1990

Fixed-head star tracker magnitude calibration on the solar maximum mission

The sensitivity of the fixed-head star trackers (FHSTs) on the Solar Maximum Mission (SMM) is defined as the accuracy of the electronic response to the magnitude of a star in the sensor field-of-view, which is measured as intensity in volts. To identify stars during attitude determination and control processes, a transformation equation is required to convert from star intensity in volts to units of magnitude and vice versa. To maintain high accuracy standards, this transformation is calibrated frequently. A sensitivity index is defined as the observed intensity in volts divided by the predicted intensity in volts; thus, the sensitivity index is a measure of the accuracy of the calibration. Using the sensitivity index, analysis is presented that compares the strengths and weaknesses of two possible transformation equations. The effect on the transformation equations of variables, such as position in the sensor field-of-view, star color, and star magnitude, is investigated. In addition, results are given that evaluate the aging process of each sensor. The results in this work can be used by future missions as an aid to employing data from star cameras as effectively as possible.

Pitone, Daniel S.↗

NASA NTRS1991

Simultaneous Solar Maximum Mission (SMM) and Very Large Array (VLA) observations of solar active regions

Very Large Array observations at 20 cm wavelength can detect the hot coronal plasma previously observed at soft x ray wavelengths. Thermal cyclotron line emission was detected at the apex of coronal loops where the magnetic field strength is relatively constant. Detailed comparison of simultaneous Solar Maximum Mission (SMM) Satellite and VLA data indicate that physical parameters such as electron temperature, electron density, and magnetic field strength can be obtained, but that some coronal loops remain invisible in either spectral domain. The unprecedent spatial resolution of the VLA at 20 cm wavelength showed that the precursor, impulsive, and post-flare components of solar bursts originate in nearby, but separate loops or systems of loops.. In some cases preburst heating and magnetic changes are observed from loops tens of minutes prior to the impulsive phase. Comparisons with soft x ray images and spectra and with hard x ray data specify the magnetic field strength and emission mechanism of flaring coronal loops. At the longer 91 cm wavelength, the VLA detected extensive emission interpreted as a hot 10(exp 5) K interface between cool, dense H alpha filaments and the surrounding hotter, rarefield corona. Observations at 91 cm also provide evidence for time-correlated bursts in active regions on opposite sides of the solar equator; they are attributed to flare triggering by relativistic particles that move along large-scale, otherwise-invisible, magnetic conduits that link active regions in opposite hemispheres of the Sun.

Willson, Robert F.↗

NASA NTRS1990

Test images for the maximum entropy image restoration method

One of the major activities of any experimentalist is data analysis and reduction. In solar physics, remote observations are made of the sun in a variety of wavelengths and circumstances. In no case is the data collected free from the influence of the design and operation of the data gathering instrument as well as the ever present problem of noise. The presence of significant noise invalidates the simple inversion procedure regardless of the range of known correlation functions. The Maximum Entropy Method (MEM) attempts to perform this inversion by making minimal assumptions about the data. To provide a means of testing the MEM and characterizing its sensitivity to noise, choice of point spread function, type of data, etc., one would like to have test images of known characteristics that can represent the type of data being analyzed. A means of reconstructing these images is presented.

Mackey, James E.↗

NASA NTRS1991

Maximum life spur gear design

Optimization procedures allow one to design a spur gear reduction for maximum life and other end use criteria. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial guess values. The optimization algorithm is described, and the models for gear life and performance are presented. The algorithm is compact and has been programmed for execution on a desk top computer. Two examples are presented to illustrate the method and its application.

Savage, M.↗

NASA NTRS1991

A mathematical model of the maximum power density attainable in an alkaline hydrogen/oxygen fuel cell

A mathematical model of a hydrogen/oxygen alkaline fuel cell is presented that can be used to predict the polarization behavior under various power loads. The major limitations to achieving high power densities are indicated and methods to increase the maximum attainable power density are suggested. The alkaline fuel cell model describes the phenomena occurring in the solid, liquid, and gaseous phases of the anode, separator, and cathode regions based on porous electrode theory applied to three phases. Fundamental equations of chemical engineering that describe conservation of mass and charge, species transport, and kinetic phenomena are used to develop the model by treating all phases as a homogeneous continuum.

Kimble, Michael C.↗

NASA NTRS1991

The 1980 solar maximum mission event listing

Information is contained on solar burst and transient activity observed by the Solar Maximum Mission (SMM) during 1980 pointed observations. Data from the following SMM experiments are included: (1) Gamma Ray Spectrometer, (2) Hard X-Ray Burst Spectrometer, (3) Hard X-Ray Imaging Spectrometer, (4) Flat Crystal Spectrometer, (5) Bent Crystal Spectrometer, (6) Ultraviolet Spectrometer and Polarimeter, and (7) Coronagraph/Polarimeter. Correlative optical, radio, and Geostationary Operational Environmental Satellite (GOES) x ray data are also presented. Where possible, bursts or transients observed in the various wavelengths were grouped into discrete flare events identified by unique event numbers. Each event carries a qualifier denoting the quality or completeness of the observations. Spacecraft pointing coordinates and flare site angular displacement values from Sun center are also included.

Speich, D. M.↗

NASA NTRS1990

Solar cycle variations in F-region Te in the vicinity of the midlatitude trough based on AE-C measurements at solar minimum and DE-2 measurements at solar maximum

Magnetospheric energy deposited in the plasmasphere produces large enhancements in the electron temperature in the nightside ionosphere at the foot of the geomagnetic L shell that traverses the plasmapause. This temperature peak, which is associated with the midlatitude trough in electron density, often has a great enough amplitude to produce 630 nm emission known as a Sar-arc. The Atmosphere Explorer-C measurements made at solar minimum and the Dynamics Explorer-2 measurements made at solar maximum are used to illustrate how this signature of F-region electron heating changes with solar activity. Global empirical models of the electron temperature and density have not been able to resolve these features thus far because of their large movements with geomagnetic activity and because of the large bin sizes used in the models. It is not yet clear how this major feature of the F-region temperature structure could be included easily in the IRI model.

Brace, Larry H.↗

NASA NTRS1990

Evaluation of the maximum cross-correlation method of estimating sea surface velocities from sequential satellite images

The maximum cross correlation (MCC) method of Leese et al. (1971) for estimating sea surface velocities from sequences of satellite images is evaluated by comparing the MCC fields obtained from sequences of AVHRR and CZCS with in situ data and velocity fields calculated with a high-resolution quasi-geostrophic model. The rms differences and vector correlations between the velocity field produced by the MCC method and the model's field are presented. It is shown that much of the difference between the MCC fields and either the in situ data or the model velocity fields can be accounted for by considering physical and biological processes not included in the MCC method. The conditions under which the method is likely to be most successful are discussed.

Tokmakian, Robin↗

NASA NTRS1991

Maximum expiratory flow-volume curves during short periods of microgravity

Nine normal subjects were studied in a NASA microgravity research aircraft to elucidate the effect of normal gravitation on the shape of the maximum expiratory flow-volume (MEFV). They performed multiple MEFV maneuvers at 0, 1, and approximately 2 G. The MEFV curves for each subject were filtered, aligned at residual volume, and ensemble-averaged to produce an average MEFV curve for each state, allowing differences to be studied. Most subjects showed a decrease in the forced vital capacity at 0 G. The mean lung volume associated with a given flow was lower at 0 G over about the upper half of the vital capacity. There were consistent but highly individual changes in the position and magnitude of detailed features of the curve. This supports the concept that the location and motion of choke points that determine the detailed individual configuration of MEFG curves can be significantly influenced by gravitational forces, presumably via the effects of change in longitudinal tension on local airway pressure-diameter behavior and thus wave speed.

Guy, H. J. B.↗

NASA NTRS1991

Maximum life spur gear design

Savage, M.↗

NASA NTRS1991

A PC-based hardware implementation of the maximum-likelihood classifier for the Shuttle Ice Detection System

A PC-based near-real time implementation of a two-channel maximum-likelihood classifier is described. The statistical distribution of the reflectance characteristics of ice, frost, and water formation on spray-on-foam-insulation, which covers the External Tank surface of the Space Shuttle, is acquired. The classification technique is based on these statistics. The computer, set in either a training or a classifying mode, learns the statistics of the various classes, or produces a color-coded image denoting the respective categories of classification. The classified results are memory-mapped for efficiency. The speed of the classification process is only limited by the speed of the digital frame grabber and the software that interfaces the frame grabber to the monitor. The process took 4 seconds for a 512 x 480 pixel image.

Jaggi, S.↗