Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

AGING AND SURVEILLANCE OF VITON GLT O-RINGS IN MODEL 9975 SHIPPING PACKAGES

Radioactive material packages (DOT Type B) such as the Model 9975 are used to transport Pu-bearing materials. The 9975 package provides double payload containment via nested stainless steel primary (PCV) and secondary (SCV) containment vessels. The containment vessels are closed by a conical plug sealed with dual O-rings (Figure 1) made of Parker Seals compound V0835-75, based on Viton{reg_sign} GLT fluoroelastomer. The outer O-ring is credited as being leaktight per ANSI N14.5 with a leak rate of <1E-07 ref cc/sec. The 9975 package is being used for interim storage in the K-Area Material Storage (KAMS) facility at the Savannah River Site. The aging performance of the O-rings is being studied to provide the storage facility a technical basis for service life prediction and safety analysis.

36 MATERIALS SCIENCE↗

Precipitation behavior of stainless steel weld overlay cladding exposed to a long-term thermal aging

Highlights: • Silicide phase formation with G-phase was first time to be observed. • Precipitation behavior discrepancy existed at different locations of ferrite phase. • G-phase and silicide phase formed along dislocations and within ferrite matrix. • Heterogeneous distribution of elements induced silicide phase formation. - Abstract: Thermal aging behavior of stainless steel weld overlay cladding aged at 400 °C for 10,000 h was investigated. The results showed that the precipitates along the dislocation and within ferrite matrix contained the face-centered cubic structural G-phase and silicide phase. Silicide phase, supposed to be (Fe, Mn){sub 3}Si phase, preferred to form with G-phase along the dislocations and within ferrite matrix. Silicide phase showed a cube-on-cube relationship with ferrite phase and G-phase. Heterogeneous distribution of elements within Ni-Mn-Si clusters was responsible for silicide phase formation during thermal aging process, and the corresponding precipitation behavior discrepancy at different forming sites (dislocations, ferrite matrix and phase boundary) was discussed.

36 MATERIALS SCIENCE↗

Effects of precipitates and its interface on thermal conductivity of Mg–12Gd alloy during aging treatment

Highlights: • Hardness and thermal conductivity of alloy can be improved by aging treatment. • The interface between precipitates and matrix transformed coherent into incoherent with increasing aging time. • Coherent interface would impede the improvement of thermal conductivity of alloy. - Abstract: How to simultaneously improve the thermal conductivity and mechanical properties of Mg alloys is an interesting and important issue topic. In the present study, the effect of aging treatment on the thermal conductivity and micro-hardness of Mg–12Gd alloy was investigated. Results indicated that the thermal conductivity and micro-hardness of the alloy could be significantly improved by aging treatment, and Mg–12Gd alloy exhibited a typical aging hardening response with the increasing aging time. At the early stage of aging (4 h), a large number of fine particles precipitated from α-Mg matrix, but thermal conductivity of alloy increased a little, which was attributed to the coherent interface hindering the increase of thermal conductivity. The thermal conductivity increased to the peak value of 75.7 W/(m·K) at the aging time of 300 h, which was about 2.17 times that of as-solutionized alloy. The huge increment in the thermal conductivity of as-aged Mg–12Gd alloy was related to the precipitation of particles and the incoherent interface between precipitates and α-Mg matrix.

36 MATERIALS SCIENCE↗

Long-term Prediction of Spent Fuel Storage Canisters - Issues and Approaches - 18112

The considerations involved in aging management of stainless steel canisters used in dry cask storage of spent fuel are discussed in this paper in a probabilistic framework. The two important modes of degradation in the long-term performance of the casks are localized corrosion and stress corrosion cracking initiating from the external surface. These degradation modes are determined by the evolution of the electrochemical behavior and the strain rate of the stainless steel. Laboratory data suggest that Type 304L/316L stainless steels should suffer from localized corrosion and SCC under salt deposits. However, field inspection of the canisters has not indicated extensive pitting or stress corrosion cracking. This discrepancy can be understood in terms of the joint probabilities of various factors that must come together to cause these failure modes. A Bayesian network approach is suggested as the framework for modeling the probability of failure of canisters and long-term management of aging. The gaps in knowledge to conduct a Bayesian network analysis are discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Prediction of hardness minimum locations during natural aging in an aluminum alloy 6061-T6 friction stir weld

This study describes a simple model that can predict the evolution of hardness distribution as a function of natural aging time in a heat-treatable 6061-T6 Al alloy plate subjected to friction stir welding (FSW). First, two dimensional thermal distributions were simulated as a function of time in the FSW plate by finite element modeling. Second, the hardness changes during natural aging were measured as a function of aging time for a number of Al specimens that had been previously isothermally heat-treated to different hold temperatures in order to determine the natural aging kinetics. Finally, the simulated temperature profiles and the natural aging kinetics were correlated to predict the hardness profiles in the FSW plate. The predicted hardness variations are consistent with measured hardness profiles in that the location of minimum hardness moves away from the centerline as the aging time and/or heat input increases. The hardness variation was also related to the location of failure in cross-weld tensile samples.

36 MATERIALS SCIENCE↗

Precipitation behaviour of γ′ phase in Alloy 693

This paper reports the precipitation behaviour of γ′ phase in the newly developed Ni-base superalloy Alloy 693. Precipitation of γ′ particles is studied at different temperatures ranging from 800 °C to 950 °C under isothermal conditions for various time periods. Monomodal, bimodal and trimodal size distributions of γ′ precipitates have been observed depending on the temperature of annealing and the cooling rates. These studies have been carried out using scanning and transmission electron microscopy. Results are compared with existing literature and explained on the basis of classical nucleation and growth theory. - Highlights: •The alloy exhibits multi-modal distribution of γ′ precipitates formed in aged Alloy 693. •The γ′ phase has been found contain up to 4 at% of Nb. •Results have been explained on the basis of classical nucleation and growth models.

36 MATERIALS SCIENCE↗

Microstructure evolution and mechanical properties of Cu/Sn/Ag TLP-bonded joint during thermal aging

Highlights: • The thermal reliability of the Cu/Sn/Ag TLP-bonded joint was investigated through high-temperature storage. • A diffusion reaction occurred at the interface between Cu{sub 3}Sn and Ag{sub 3}Sn during thermal aging. • The mechanism of the Cu{sub 3}Sn/Ag{sub 3}Sn interfacial reaction was investigated from thermodynamics and kinetics. - Abstract: Low-temperature transient liquid phase (TLP) bonding is a promising joining technology for high-temperature electronic devices packaging. However, the effect of thermal aging on the joint microstructure and performance has been rarely studied so far. In this paper, the relationship between microstructural evolution and mechanical property was developed for the Cu/Sn/Ag TLP-bonded joint during 350 °C aging. Experimental results show that an interfacial reaction occurs between the intermetallic compounds (IMCs) of Cu{sub 3}Sn and Ag{sub 3}Sn, which induces that a great amount of Cu{sub 3}Sn particles or wedges embed into the Ag-Sn phase layer. The reaction process is controlled by a volume diffusion of Cu elements from the Cu substrate, and capable of promoting the transformation from Ag{sub 3}Sn into Ag(Sn) solid solution. Cu{sub 41}Sn{sub 11} phase can be formed at the expense of Cu{sub 3}Sn and Cu, of which transformation process is completely achieved after aging for 480 h, and the Cu(Sn) solid solution intimately contacts with the opposite Ag(Sn) solid solution in many areas after aging for 960 h. The joint mechanical property initially declines due to the formation of Cu{sub 41}Sn{sub 11} phase and Cu-Sn IMCs grain coarsening, and then increases because of the complete depletion of Cu{sub 3}Sn and substantial precipitation of Cu(Sn) solid solution. After aging for nearly 1000 h, the joint still maintains a high shear strength of >40 MPa, indicating an excellent thermal reliability.

36 MATERIALS SCIENCE↗

Optimization of direct aging temperature of Ti free grade 300 maraging steel manufactured using laser powder bed fusion (LPBF)

Maraging steels are of interest to the tool and die industry owing to their high strength, toughness and machinability. Additive manufacturing technologies like laser powder bed fusion (LPBF) can result in a paradigm shift in the design of maraging steel tools. Here, the lack of precipitates, in combination with solute segregation and non-equilibrium microstructure in Grade 300 maraging steel fabricated via LPBF makes the steel amenable to strengthening via direct aging post fabrication instead of the conventional solution treatment and aging. In this study we have focused on optimizing the direct aging temperature for a Ti-free Grade 300 maraging steel fabricated via LPBF for two different aging times. Through strain hardening analysis and detailed microstructural characterization, we show that direct aging at a temperature of 440 °C for 6 h resulted in the best strength-ductility combination. Aging samples at a lower temperature or shorter time resulted in no strain hardening prior to necking as a result of lower fraction of reverted austenite, whereas aging samples at a higher temperature resulted in extensive recrystallization of martensite, coarsening of precipitates, and extensive austenite reversion, resulting in softening of the fabricated parts.

36 MATERIALS SCIENCE↗

Decomposition of Potassium Ferrate(VI)(K{sub 2}FeO{sub 4}) and Potassium Ferrate(III)(KFeO{sub 2}): In-situ Moessbauer Spectroscopy Approach

Moessbauer spectroscopy was shown to be very useful technique studying the mechanism of thermal decomposition or aging processes of the most known ferrate(VI), K{sub 2}FeO{sub 4}. In-situ Moessbauer spectroscopy approach was used to monitor the phase composition during the studied processes. The experimental set-up was designed to perform in-situ measurements at high temperatures and at different air humid conditions at room temperature. The potassium ferrate(III), KFeO{sub 2} was demonstrated to be the primary product of thermal decomposition of K{sub 2}FeO{sub 4}. The KFeO{sub 2} was unstable in a humid air at room temperature and reacted with components of air, H{sub 2}O and CO{sub 2} to give Fe{sub 2}O{sub 3} nanoparticles and KHCO{sub 3}. The aging kinetics of K{sub 2}FeO{sub 4} and KFeO{sub 2} under humid air were significantly dependent on the relative air humidity.

36 MATERIALS SCIENCE↗

Average Structure Evolution of δ-phase Pu-Ga Alloys

[Full Text] Plutonium metal is a highly unusual element, exhibiting six allotropes at ambient pressure, from room temperature to its melting point. Many phases of plutonium metal are unstable with temperature, pressure, chemical additions, and time. This strongly affects structure and properties, and becomes of high importance, particularly when considering effects on structural integrity over long time periods. The fcc δ-phase deserves additional attention, not only in the context of understanding the electronic structure of Pu, but also as one of the few high-symmetry actinide phases that can be stabilized down to ambient pressure and room temperature by alloying it with trivalent elements. We will present results on recent work on aging of Pu-2at.%Ga and Pu-7at.%Ga alloys

36 MATERIALS SCIENCE↗

High-resolution electron microscopy characterization of 2H and 9R variant in the ferritic steels containing copper

Ferritic steels containing copper have been studied as model systems for cluster/precipitate formation in reactor pressure vessel steels. The samples were aged at 400 deg. C for 2000 h and subsequently analyzed using high-resolution electron microscopy. Direct evidence was found that, besides the 9R structure occurring, there exist also 2H variant and stacking faults in local regions of the same Cu precipitate. The 2H variant has a hexagonal unit cell with lattice parameters a = b = 0.254 nm and c = 0.417 nm and axial ratio c/a = 1.642. - Research Highlights: {yields}The crystal structures of the copper precipitates in aged reactor pressure vessel model steel were studied by high-resolution electron microscopy (HRTEM). {yields}Besides the 9R structure, there exist also 2H structure and stacking faults within a copper precipitate in aged samples (2000 h at 400 deg. C). {yields}The (001) plane of the 2H structure copper phase is perpendicular to the (010) plane. {yields}The 2H variant has a hexagonal unit cell with lattice parameters a = b = 0.254 nm and c = 0.417 nm and axial ratio c/a = 1.642.

36 MATERIALS SCIENCE↗

Effect of cycled combustion ageing on a cordierite burner plate

A combination of {sup 57}Fe-Moessbauer spectroscopy and X-ray Powder Diffraction analysis has been employed to study modifications in chemical and mechanical stability occurring in a cordierite burner aged under combustion conditions which simulate the working of domestic boilers. Moessbauer study shows that Fe is distributed into the structural sites of the cordierite lattice as Fe{sup 2+} and Fe{sup 3+} ions located mostly at octahedral sites. Ferric oxide impurities, mainly hematite, are also present in the starting cordierite material accounting for {approx_equal}40% of the total iron phases. From Moessbauer and X-ray diffraction data it can be deduced that, under the combustion conditions used, new crystalline phases were formed, some of the substitutional Fe{sup 3+} ions existing in the cordierite lattice were reduced to Fe{sup 2+}, and ferric oxides underwent a sintering process which results in hematite with higher particle size. All these findings were detected in the burner zone located in the proximity of the flame and were related to possible chemical reactions which might explain the observed deterioration of the burner material. Research Highlights: {yields}Depth profile analyses used as a probe to understand changes in refractory structure. {yields}All changes take place in the uppermost surface of the burner, close to the flame. {yields}Reduction to Fe{sup 2+} of substitutional Fe{sup 3+} ions and partial cordierite decomposition. {yields}Heating-cooling cycling induces a sintering of the existing iron oxide particles. {yields}Chemical changes can explain the alterations observed in the material microstructure.

36 MATERIALS SCIENCE↗

Application of Glow Discharge Plasma to Alter Surface Properties of Materials

Some polymer materials that are considered important for spaceport operations are rendered noncompliant when subjected to the Kennedy Space Center (KSC) Standard electrostatic testing. These materials operate in stringent environmental conditions, such as high humidity. Treating materials that fail electrostatic testing and altering their surface properties so that they become compliant would result in considerable cost savings. Significant improvement in electrostatic dissipation of Saf-T-Vu PVC after treatment with air Atmospheric Plasma Glow Discharge (APGD) was observed and the material now passed the KSC electrostatic test. The O:C ratio on the surface, as monitored by X-ray Photoelectron Spectroscopy, increased from 0.165 tO 0.275 indicating enhanced oxidation, and surface contact angle measurements decreased from 107.5 to 72.6 showing increased hydrophilicity that accounted for the increased conductivity. Monitoring of the aging showed that the materials hydrophobic recovery resulted in it failing the electrostatic test 30 hours after treatment. This was probably due to the out-diffusion of the added Zn, Ba, and Cd salt stabilizers detected on the surface and/or diffusion of low molecular weight oligomers. On going work includes improving the long term hydrophilicity by optimizing the APGD process with different gas mixtures. Treatment of other spaceport materials is also presented.

Trigwell, Steve↗

Influence of the - phase separation on the tensile properties of Fe-base ODS PM 2000 alloy

The yield and ultimate tensile strengths of an ultrafine grained, oxide dispersion strengthened (ODS) PM 2000 alloy increased during aging at 475 C. Atom probe tomography and X-ray diffraction analysis revealed that the decrease in lattice parameter and the increases in the yield and ultimate tensile strengths were correlated with phase separation into Fe-rich {alpha} and Cr-enriched {alpha}{prime} phases. The lattice misfit between the emerging {alpha} and {alpha}{prime} domains and the resulting elastic strain, and the increment of the elastic modulus with aging time due to the corresponding decrease of lattice parameter during {alpha}-{alpha}{prime} phase separation, can be regarded as the main causes of hardening.

36 MATERIALS SCIENCE↗

Applications in the Nuclear Industry for Thermal Spray Amorphous Metal and Ceramic Coatings

Amorphous metal and ceramic thermal spray coatings have been developed that can be used to enhance the corrosion resistance of containers for the transportation, aging and disposal of spent nuclear fuel and high-level radioactive wastes. Iron-based amorphous metal formulations with chromium, molybdenum and tungsten have shown the corrosion resistance believed to be necessary for such applications. Rare earth additions enable very low critical cooling rates to be achieved. The boron content of these materials, and their stability at high neutron doses, enable them to serve as high efficiency neutron absorbers for criticality control. Ceramic coatings may provide even greater corrosion resistance for container applications, though the boron-containing amorphous metals are still favored for criticality control applications. These amorphous metal and ceramic materials have been produced as gas atomized powders and applied as near full density, non-porous coatings with the high-velocity oxy-fuel process. This paper summarizes the performance of these coatings as corrosion-resistant barriers, and as neutron absorbers. Relevant corrosion models are also discussed, as well as a cost model to quantify the economic benefits possible with these new materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of a Cast Duplex Stainless Steel with 3.0%Cu and Modeling of Precipitation Hardening

Duplex stainless steels (DSSs) are corrosion-resistant alloys extensively used in aggressive environments. Cast DSSs may be selected for pipes, valves and pumps in chemical, petrochemical and nuclear industries. The grade steel ASTM A890 1B is an example of cast DSS with 2.7-3.3%Cu addition. Copper increases the resistance to many types of corrosion, especially in non-oxidizing environments. When the copper content is higher than 2%, the steel can be precipitation-hardened. In this work, the precipitation hardening of a DSS ASTM A890 1B steel with 3.0%Cu was studied and modeled for aging temperatures in the 450-600 °C range. Copper precipitates in the ferrite phase, but remains in solid solution in the austenite. The age hardening curves were modeled by ΔH = K(t){sup n} model, where ΔH is the increase in hardness, t is the aging time, and K and n are constants to be determined. The microstructure and substructure were investigated by scanning electron and transmission electron microscopes.

36 MATERIALS SCIENCE↗

Physical model of MOS structure aging

A physical model of MOS structure aging is presented. The energy parameter of a strained MOS structure, i.e., the energy level of strained bonds, was found using the results of accelerated testing.

36 MATERIALS SCIENCE↗

Ar-40/Ar-39 ages and cosmic ray exposure ages of Apollo 14 samples.

We have used the Ar-40/Ar-39 dating technique on eight samples of Apollo 14 rocks (14053, 14310), breccia fragments (14321), and soil fragments (14001, 14167). The large basalt fragments give reasonable Ar-40/Ar-39 release patterns and yield well defined crystallization ages of 3.89-3.95 aeons. Correlation of the Ar-40/Ar-39 release patterns with Ar-39/Ar-37 patterns showed that the low temperature fractions with high radiogenic argon loss came from K-rich phases. A highly shocked sample and fragments included in the breccia yield complex release patterns with a low temperature peak. The total argon age of these fragments is 3.95 aeons. Cosmic ray exposure ages on these samples are obtained from the ratio of spallogenic Ar-38 to reactor induced Ar-37 and show a distinct grouping of low exposure ages of 26 m.y. correlated with Cone crater. Other samples have exposure ages of more than 260 m.y. and identify material with a more complex integrated cosmic age exposure history.

Turner, G.↗