Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “map accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Surface radiation in the tropical Pacific

Monthly surface radiative fluxes have been calculated for the tropical Pacific between January 1970 and February 1978, using a radiative transfer parameterization. The radiative transfer parameterization included detailed treatments of the molecular and droplet absorptions, and surface and cloud reflections. The input data used in the calculations were obtained from the National Climatic Center (NCC), the National Center for Atmospheric Research (NCAR), and from the University of Hawaii. The results show that the distribution of surface radiation closely follows the distribution of cloudiness, and, to a lesser degree, humidity. The rms net error in the surface radiation estimates was about 15 W per sq m, with the largest contribution from uncertainties in the cloud cover and humidity data. The sensitivity of surface radiation parameterizations to input data errors is discussed, and some accuracy requirements for satellite retrievals of atmospheric and cloud parameters are proposed. The calculations are presented in the annually-averaged maps of surface radiation variations.

Chou, M.-D.↗
NASA NTRS1992

Neural network classification of questionable EGRET events

High energy gamma rays (greater than 20 MeV) pair producing in the spark chamber of the Energetic Gamma Ray Telescope Experiment (EGRET) give rise to a characteristic but highly variable 3-D locus of spark sites, which must be processed to decide whether the event is to be included in the database. A significant fraction (about 15 percent or 10(exp 4) events/day) of the candidate events cannot be categorized (accept/reject) by an automated rule-based procedure; they are therefore tagged, and must be examined and classified manually by a team of expert analysts. We describe a feedforward, back-propagation neural network approach to the classification of the questionable events. The algorithm computes a set of coefficients using representative exemplars drawn from the preclassified set of questionable events. These coefficients map a given input event into a decision vector that, ideally, describes the correct disposition of the event. The net's accuracy is then tested using a different subset of preclassified events. Preliminary results demonstrate the net's ability to correctly classify a large proportion of the events for some categories of questionables. Current work includes the use of much larger training sets to improve the accuracy of the net.

Meetre, C. A.↗
NASA NTRS2001

Assessment of internal mammary artery and saphenous vein graft patency and flow reserve using transthoracic Doppler echocardiography

OBJECTIVE: To investigate transthoracic Doppler echocardiography in the identification of coronary artery bypass graft (CABG) flow for assessing graft patency. DESIGN: The initial study group comprised 45 consecutive patients with previous CABG undergoing elective cardiac catheterisation for recurrent ischaemia. The Doppler variables best correlated with angiographic graft patency were then tested prospectively in a further 84 patients (test group). SETTING: Three tertiary referral centres. INTERVENTIONS: Flow velocities in grafts were recorded at rest and during hyperaemia induced by dipyridamole (0.56 mg/kg/4 min), under the guidance of transthoracic colour Doppler flow mapping. Findings on transthoracic Doppler were compared with angiography. MAIN OUTCOME MEASURES: Feasibility of identifying open grafts by Doppler and diagnostic accuracy for Doppler detection of significant (>/= 70%) graft stenosis. RESULTS: In the test group the identification rate for mammary artery grafts was 100%, for saphenous vein grafts to left anterior descending coronary artery 91%, for vein grafts to right coronary artery 96%, and for vein grafts to circumflex artery 90%. Coronary flow reserve (the ratio between peak diastolic velocity under hyperaemia and at baseline) of < 1.9 (95% confidence interval 1.83 to 2.08) had 100% sensitivity, 98% specificity, 87.5% positive predictive value, and 100% negative predictive value for mammary artery graft stenosis. Coronary flow reserve of < 1.6 (95% CI 1.51 to 1.73) had 91% sensitivity, 87% specificity, 85.4% positive predictive value, and 92.3% negative predictive value for significant vein graft stenosis. CONCLUSIONS: Transthoracic Doppler can provide non-invasive assessment of CABG patency.

Multicenter Study↗
NASA NTRS2011

Inter-Comparison of Lightning Trends from Ground-Based Networks During Severe Weather: Applications Toward GLM

The planned GOES-R Geostationary Lightning Mapper (GLM) will provide total lightning data on the location and intensity of thunderstorms over a hemispheric spatial domain. Ongoing GOES-R research activities are demonstrating the utility of total flash rate trends for enhancing forecasting skill of severe storms. To date, GLM total lightning proxy trends have been well served by ground-based VHF systems such as the Northern Alabama Lightning Mapping Array (NALMA). The NALMA (and other similar networks in Washington DC and Oklahoma) provide high detection efficiency (> 90%) and location accuracy (< 1 km) observations of total lightning within about 150 km from network center. To expand GLM proxy applications for high impact convective weather (e.g., severe, aviation hazards), it is desirable to investigate the utility of additional sources of continuous lightning that can serve as suitable GLM proxy over large spatial scales (order 100 s to 1000 km or more), including typically data denied regions such as the oceans. Potential sources of GLM proxy include ground-based long-range (regional or global) VLF/LF lightning networks such as the relatively new Vaisala Global Lightning Dataset (GLD360) and Weatherbug Total Lightning Network (WTLN). Before using these data in GLM research applications, it is necessary to compare them with LMAs and well-quantified cloud-to-ground (CG) lightning networks, such as Vaisala s National Lightning Detection Network (NLDN), for assessment of total and CG lightning location accuracy, detection efficiency and flash rate trends. Preliminary inter-comparisons from these lightning networks during selected severe weather events will be presented and their implications discussed.

Carey, Lawrence D.↗
NASA NTRS2018

Mapping Pine Plantations in the Southeastern U.S. Using Structural, Spectral, and Temporal Remote Sensing Data

The southeastern U.S. produces the most industrial roundwood in the U.S. each year, largely from commercial pine plantations. The extent of plantation forests and management dynamics can be difficult to ascertain from periodic forest inventories, yet short-rotation tree plantations also present challenges for remote sensing. Here, we integrated spectral, temporal, and structural information from airborne and satellite platforms to distinguish pine plantations from natural forests and evaluate the contribution from planted forests to regional forest coverin the southeastern U.S. Within flight lines from NASA Goddard's Lidar, Hyperspectral, and Thermal (G-LiHT) Airborne Imager, lidar metrics of forest structure had the highest overall accuracy for pine plantations among single-source classifications (90%), but the combination of spectral and temporal metrics from Landsat generated comparable accuracy (91%). Combined structural, temporal, and spectral information from G-LiHT and Landsat had the highest accuracy for plantations (92%) and natural forests (88%). At a regional scale, classifications using Landsat spectral and temporal metrics had between 74 and 82% mean class accuracy for plantations.Regionally, plantations accounted for 28% of forest cover in the southeastern U.S., a result similar to plot-based estimates, albeit with greater spatial detail. Regional maps of plantation forests differed from existing map products, including the National Land Cover Database. Combining plantation extent in 2011 with Landsat based forest change data identified strong regional gradients in plantation dynamics since 1985, with distinct spatial patterns of rotation age (east-west) and plantation expansion (interior). Our analysis demonstrates the potential to improve the characterization of dynamic land cover classes, including economically important timber plantations, by integrating diverse remote sensing datasets. Critically, multi-source remote sensing provides an approach to leverage periodic forest inventory data for annual monitoring of managed forest landscapes.

Fagan, M. E.↗
NASA NTRS1977

Properties of satellite orbits - Ephemerides, dynamical constants, and satellite phenomena

A short account is given of the history of the observation of the Galilean satellites, with an emphasis on early orbital work and practical applications thereof to world mapping and navigation. The general character of satellite motion is described from a geometric and physical point of view without reference to mathematics. This is followed by a similar discussion of ordinary and mutual satellite phenomena. The accuracies of published ephemerides are discussed on the basis of the observations and theories available for the various satellites. The ephemeris tables need to be revised and, perhaps, partly replaced by well-documented computer programs. The determination of physical parameters (planetary masses and oblatenesses; masses, sizes, and albedo maps of satellites) from positional observations of satellites and photometric observations of ordinary and mutual satellite phenomena is discussed.

Aksnes, K.↗
NASA NTRS1974

Automated strip-mine and reclamation mapping from ERTS

The author has identified the following significant results. Computer processing techniques were applied to ERTS-1 computer-compatible tape (CCT) data acquired in August 1972 on the Ohio Power Company's coal mining operation in Muskingum County, Ohio. Processing results succeeded in automatically classifying, with an accuracy greater than 90%: (1) stripped earth and major sources of erosion; (2) partially reclaimed areas and minor sources of erosion; (3) water with sedimentation; (4) water without sedimentation; and (5) vegetation. Computer-generated tables listing the area in acres and square kilometers were produced for each target category. Processing results also included geometrically corrected map overlays, one for each target category, drawn on a transparent material by a pen under computer control. Each target category is assigned a distinctive color on the overlay to facilitate interpretation. The overlays, drawn at a scale of 1:250,000 when placed over an AMS map of the same area, immediately provided map locations for each target. These mapping products were generated at a tenth of the cost of conventional mapping techniques.

Rogers, R. H.↗
NASA NTRS1978

Geological applications of thermal-inertia mapping from satellite

The author has identified the following significant results. A more efficient algorithm for calculating surface temperature was developed. This algorithm was determined to be essentially exact, and relative accuracies in determining thermal inertia of the finite difference and the linear Fourier series algorithms were approximately 5% for both. A procedure for performing geometric registration was developed.

Offield, T. W.↗
NASA NTRS1991

Ocean topography mapping, improvement of the marine geoid, and global permanent ocean circulation studies from TOPEX/Poseidon altimeter data

The TOPEX/POSEIDON altimeter measurements will be the first global observations of the sea surface with accuracy sufficient to make quantitative determinations of the ocean's general circulation and its variations. These measurements are an important step to understanding global change in the ocean and its impact on the climate. Our investigation will focus on the examination of features in the sea surface elevation at the largest spatial and temporal scales. TOPEX/POSEIDON altimeter measurements will be used in conjunction with observations from past satellite-altimeter missions, such as NASA's GEOS-3 and Seasat, the U.S. Navy's Geosat and SALT, and the European Remote Sensing satellite in order to address the following issues: (1) Improve models of the marine geoid, especially at wavelengths needed to understand the basin-scale ocean dynamic topograpy. (2) Measure directly from the altimeter data the expression of the mean global ocean circulation in the sea surface at the largest scales through a simultaneous solution for gravity, orbital, and oceanographic parameters. (3) Examine the sea surface measurements for changes in global ocean mass or volume, interannual variations in the basin-scale ocean circulation, and annual changes in the heating and cooling of the upper ocean.

Marsh, James G.↗
NASA NTRS1975

Quantitative water quality with LANDSAT and Skylab

Correlation studies were completed between LANDSAT Multispectral Scanner (MSS) band ratios derived from computer compatible tape (CCT) and 170 water samples taken from three large Kansas reservoirs, coincident with 16 different LANDSAT passes over a 13 month period. The following conclusions were obtained: (1) LANDSAT MSS reflectance levels are useful for quantitative measurement of suspended solids up to at least 900 ppm, (2) MSS band ratios derived from CCT can measure suspended solids with 67% confidence level accuracy of 12 ppm over the range 0-80 ppm and 35 ppm over the range 0900 ppm, (3) suspended solids contour maps can be easily constructed from CCT for water bodies larger than approximately 100 acres, (4) rationing suppresses MSS reflectance level dependence on seasonal sun angle variation and permits measurement of suspended load the year round in the middle latitudes. SKYLAB imagery from a single pass over three reservoirs compares favorably to LANDSAT results up to 100 ppm.

Yarger, H. L.↗
NASA NTRS1975

Comparative utility of LANDSAT-1 and Skylab data for coastal wetland mapping and ecological studies

Skylab 190-A photography and LANDSAT-1 analog data have been analyzed to determine coastal wetland mapping potential as a near term substitute for aircraft data and as a long term monitoring tool. The level of detail and accuracy of each was compared. Skylab data provides more accurate classification of wetland types, better delineation of freshwater marshes and more detailed analysis of drainage patterns. LANDSAT-1 analog data is useful for general classification, boundary definition and monitoring of human impact in wetlands.

Anderson, R.↗
NASA NTRS1979

Ten-Ecosystem Study (TES) site 9, Washington County, Missouri

The author has identified the following significant results. Sufficient spectral separability exists among softwood, hardwood, grassland, and water to develop a level 2 classification and inventory. Using the tested automatic data processing technology, softwood and grassland signatures can be extended across the county with acceptable accuracy; with more dense sampling, the hardwood signature probably could also be extended. Fall was found to be the best season for mapping this ecosystem.

Echert, W. H.↗
NASA NTRS1982

SEASAT SAR performance evaluation study

The performance of the SEASAT synthetic aperture radar (SAR) sensor was evaluated using data processed by the MDA digital processor. Two particular aspects are considered the location accuracy of image data, and the calibration of the measured backscatter amplitude of a set of corner reflectors. The image location accuracy was assessed by selecting identifiable targets in several scenes, converting their image location to UTM coordinates, and comparing the results to map sheets. The error standard deviation is measured to be approximately 30 meters. The amplitude was calibrated by measuring the responses of the Goldstone corner reflector array and comparing the results to theoretical values. A linear regression of the measured against theoretical values results in a slope of 0.954 with a correlation coefficient of 0.970.

Source record↗
NASA NTRS1981

Potential utility of the thematic mapper for surface mine monitoring

One of many potential applications of the thematic mapper (TM) is surface mine monitoring. To assess this potential, data acquired by an aircraft multispectral scanner over Pennsylvania surface mines were preprocessed to simulate the anticipated spectral, spatial, and radiometric characteristics of TM data. False color imagery and thematic maps were derived from the simulated data and compared to imagery and maps derived from LANDSAT multispectral scanner subsystems data. On the basis of this comparison, TM data should definitely increase the detail and accuracy of remotely acquired surface mine information and may enable the remote determination of compliance with reclamation regulations.

Irons, J. R.↗
NASA NTRS1983

AN-A46. LANDSAT scene-to-scene registration assessment

Initial results obtained from the registration of LANDSAT-4 MSS data to LANDSAT-2 MSS data are documented and compared with results obtained from a LANDSAT-2 MSS-to-LANDSAT-2 MSS scene-to-scene registration (using the same LANDSAT-2 MSS data as the base data set in both procedures). RMS errors calculated on the control points used in the establishment of scene-to-scene mapping equations are compared to errors computed from independently chosen verification points. Models developed to estimate actual scene-to-scene registration accuracy based on the use of electrostatic plots are also presented. Analysis or results obtained indicates a statistically significant difference in the RMS errors for the element contribution. Scan line errors were not significantly different. It appears that a modification to the LANDSAT-4 MSS scan mirror coefficients is required to correct the situation.

Anderson, J. E.↗
NASA NTRS1987

Comparison of Southern Hemisphere radiosonde and LIMS temperatures at 100 mb

Radiosonde (RS)and satellite-derived (Nimbus-7 LIMS) 100-mb temperatures over New Zealand at 12 GMT are compared for the 1978-79 summer. The colocated LIMS temperature information consists of synoptically mapped values (for 12 GMT), as well as the primary nighttime orbital retrievals valid at about 1030 GMT. The RS time series of temperature is dominated by temporal fluctuations associated mainly with the eastward passage of waves which have characteristic periods of 4-5 and 11-12 days and peak-to-peak amplitudes of 10-15 K. The LIMS temperatures and the corresponding temperature time series are also found to exhibit quite close agreement (in terms of temporal phase for the latter) with the RS data. However, the LIMS-mapped temperature fluctuations suffer from a noticeable attenuation in amplitude (approaching 50 percent for higher-frequency fluctuations), which will affect the accuracy of LIMS-derived estimates of dynamical quantities such as wind velocity and relative vorticity in the lower stratosphere.

Miles, T.↗
NASA NTRS1989

The Allegheny Observatory search for planetary systems

The accomplishments of the observatory's search for planetary systems are summarized. Among these were the construction, implementation, and regular use of the Multichannel Astrometric Photometer (MAP), and the design, fabrication and use of the second largest refractor objective built since 1950. The MAP parallax and planetary observing programs are described. Various developments concerning alternate solid state photodetectors and telescope instrumentation are summarized. The extreme accuracy of the system is described in relation to a study of the position and velocity of the members of the open cluster Upgren 1. The binary star system stringently tests the theory of stellar evolution since it is composed of an evolved giant F5 III and a subgiant F5 IV star. A study that attempts to measure the luminosities, surface temperatures, and masses of these stars is discussed.

Gatewood, George D.↗
NASA NTRS1989

A fast lightstripe rangefinding system with smart VLSI sensor

The focus of the research is to build a compact, high performance lightstripe rangefinder using a Very Large Scale Integration (VLSI) smart photosensor array. Rangefinding, the measurement of the three-dimensional profile of an object or scene, is a critical component for many robotic applications, and therefore many techniques were developed. Of these, lightstripe rangefinding is one of the most widely used and reliable techniques available. Though practical, the speed of sampling range data by the conventional light stripe technique is severely limited. A conventional light stripe rangefinder operates in a step-and-repeat manner. A stripe source is projected on an object, a video image is acquired, range data is extracted from the image, the stripe is stepped, and the process repeats. Range acquisition is limited by the time needed to grab the video images, increasing linearly with the desired horizontal resolution. During the acquisition of a range image, the objects in the scene being scanned must be stationary. Thus, the long scene sampling time of step-and-repeat rangefinders limits their application. The fast range sensor proposed is based on the modification of this basic lightstripe ranging technique in a manner described by Sato and Kida. This technique does not require a sampling of images at various stripe positions to build a range map. Rather, an entire range image is acquired in parallel while the stripe source is swept continuously across the scene. Total time to acquire the range image data is independent of the range map resolution. The target rangefinding system will acquire 1,000 100 x 100 point range images per second with 0.5 percent range accuracy. It will be compact and rugged enough to be mounted on the end effector of a robot arm to aid in object manipulation and assembly tasks.

Gruss, Andrew↗