Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “liquid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

An atomic cluster expansion (ACE) potential for water under extreme conditions

We present a machine learning interatomic potential for water designed to capture its complex multiphase behavior, including both molecular and superionic ice phases. The potential is based on the atomic cluster expansion (ACE) formulation and has been parameterized to enable high-fidelity molecular dynamics simulations of water under extreme conditions, for pressures up to 100 GPa and for temperatures between 500 and 6000 K. A diverse range of configurations was generated through ab initio molecular dynamics (AI-MD) simulations, covering insulating and superionic ice phases, liquid water, and dissociated plasma phase. We demonstrate that the H 2 O ACE potential accurately reproduces experimental and DFT predicted isotherms and Hugoniots. Crucially, the potential is able to capture the intricate phase behavior of water, including the transition from molecular fluid to the appropriate solid ice phases, and the superionic ice phases. This work provides a robust interatomic potential that can be used for large-scale, accurate simulations of water under extreme thermodynamic conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A small-volume, high-throughput approach for surface tension and viscosity measurements of liquid fuels

An ongoing effort looking at bioblendstocks to function as drop-in replacements or blending components for gasoline has identified a large number of candidate fuels. This work documents an approach for rapid screening of candidate fuels using relatively small sample sizes ($\mathcal{O}(\mu\,{\rm l})$) that targets two key physical properties of liquid fuels—surface tension and viscosity. The approach utilizes shape oscillation dynamics of single droplets generated by a piezo-electric device and their decay over time. Strobed imaging of the oscillation process is used along with image processing, edge detection, and data analysis to capture the decay of the oscillation over time. The time constant of the decay process along with oscillation frequency are then used to estimate viscosity and surface tension using a theory for small amplitude droplet oscillations. Measurements are obtained for primary reference fuels (isooctane and n-heptane) as well as candidate fuels from four bio-derived functional groups of interest. Measurement results for surface tension and viscosity are correlated with literature data as well as measurements from standard reference instruments. The measurement results show that the droplet oscillation based approach is capable of reproducing surface tension and viscosity values for the tested fuels within deviations of 7% and 13% respectively from literature data. Results are obtained using an average of 5 µl per fuel within about 20 s, thus demonstrating a small-volume, high-throughput approach that can be used for screening of candidate bioblendstock fuels.

09 BIOMASS FUELS↗
DOE OSTI2025

Molecular understanding of ion transport in a zwitterionic electrolyte

Zwitterions (ZIs) are unique molecules that carry both positive and negative charges, resulting in overall charge neutrality and high dielectric constants. These distinctive properties have enabled broad applications of zwitterionic functionality, including the emerging use of ZIs in lithium-ion battery electrolytes. As a contribution to this developing field, we use all-atom molecular dynamics simulations to investigate the ion transport mechanisms in amorphous mixtures of a zwitterionic liquid containing a range of LiTFSI salt concentrations. Furthermore, the local coordination environment around the Li + ions plays a strong role in governing ionic conductivity, as well as the enhancement of Li + transport numbers with increasing salt concentration. Addition of small amounts of water leads to increased conductivity and ion mobilities due to the water coordinating with the Li + ions, which reduces direct interactions with larger charged species.

Classical molecular dynamic simulations↗
DOE OSTI2024

Viscoelastic relaxation and topological fluctuations in glass-forming liquids

In this study, a method for characterizing the topological fluctuations in liquids is proposed. This approach exploits the concept of the weighted gyration tensor of a collection of particles and permits the definition of a local configurational unit (LCU). The first principal axis of the gyration tensor serves as the director of the LCU, which can be tracked and analyzed by molecular dynamics simulations. Analysis of moderately supercooled Kob–Andersen mixtures suggests that orientational relaxation of the LCU closely follows viscoelastic relaxation and exhibits a two-stage behavior. The slow relaxing component of the LCU corresponds to the structural, Maxwellian mechanical relaxation. Additionally, it is found that the mean curvature of the LCUs is approximately zero at the Maxwell relaxation time with the Gaussian curvature being negative. This observation implies that structural relaxation occurs when the configurationally stable and destabilized regions interpenetrate each other in a bicontinuous manner. Finally, the mean and Gaussian curvatures of the LCUs can serve as reduced variables for the shear stress correlation, providing a compelling proof of the close connection between viscoelastic relaxation and topological fluctuations in glass-forming liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

First-Principles-Based Machine Learning Models for Phase Behavior and Transport Properties of CO 2

In this work, we construct distinct first-principles-based machine-learning models of CO 2 , reproducing the potential energy surface of the PBE-D3, BLYP-D3, SCAN and SCAN-rvv10 approximations of density functional theory. Here we employ the Deep Potential methodology to develop the models and consequently achieve a significant computational efficiency over ab initio molecular dynamics (AIMD) that allows for larger system sizes and time scales to be explored. Although our models are trained only with liquid phase configurations, they are able to simulate a stable interfacial system and predict vapor-liquid equilibrium properties, in good agreement with results from the literature. Because of the computational efficiency of the models, we are also able to obtain transport properties, such as viscosity and diffusion coefficients. We find that the SCAN-based model presents a temperature shift in the position of the critical point, while the SCAN-rvv10-based model shows improvement but still exhibits a temperature shift that remains approximately constant for all properties investigated in this work. We find that the BLYP-D3-based model generally performs better for liquid phase and vapor-liquid equilibrium properties, but the PBE-D3-based model is better suited for predicting transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Measurement of the onset of nucleate boiling in liquid xenon

We report the first precision measurement of the superheat temperature required for bubble nucleation in liquid xenon of Δ T wall,ONB = (16.9±0.5) K and Δ T wall,ONB = (19.2 +0.4 -1.1 ) K at pressures of P = (0.98±0.02) bar and P = (1.32 +0.05 -0.01 ) bar, respectively. Both are measured at a subcooled bulk fluid temperature of ~ 162 K. A dedicated liquid xenon setup is used to measure the temperature at which bubble nucleation first appears on the flat surface of a resistor. The associated average heat flux at the surface of the resistor is determined using fluid dynamics simulations. Future experiments can use these experimental results to determine the likelihood of boiling in liquid xenon and to design effective thermal sinks that prevent bubble nucleation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Electric-Field-Induced Assembly of an Ionic Liquid–Water Interphase Enables Efficient Heavy Metal Electrosorption

Controlling ion desolvation, transport, and charge transfer at the electrode-electrolyte interface (EEI) is critical to enabling the rational design of efficient and selective separation of targeted heavy metals and decontamination of industrial waste water. One challenge is to sufficiently resolve and interrogate the intermediate transformation steps between solvated metal cations and bare cations for electroreduction at the EEI and establish pathways to modulate these steps to achieve efficient energy transfer for targeted reactive separations. Herein, we obtained a predictive understanding of the effect of adding a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium chloride (EMIMCl), to an aqueous electrolyte on modulating the desolvation and electrosorption of Pb 2+ cations using a combination of experimental and theoretical techniques. Here, we reveal formation of a compact interphase layer consisting of EMIMCl-Pb complex clusters under an applied electric field using operando electrochemical Raman spectroscopy, atomic force microscopy, and electrochemical impedance spectroscopy measurements combined with classical molecular dynamics simulations. The application of a larger negative potential is shown to result in formation of a well oriented layer with the positive imidazolium ring of the EMIMCl lying on the electrode and the long hydrophobic alkyl chain extending into the bulk electrolyte. This oriented layer is demonstrated to facilitate desolvation of incoming solvated Pb 2+ cations and decrease the charge transfer resistance for Pb electrodeposition, which has important implications for selective removal of Pb from contaminated mixtures. Overall, our studies open up new opportunities to modulate ion desolvation using hydrophobic ionic liquids in aqueous electrolytes for efficient heavy metal separation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Observation of Photoexcited Charge Carrier Dynamics and Electrostatic Fields at Photocatalytic Semiconductor/liquid Interfaces

Photoelectrochemical conversion of solar energy to fuels at semiconductor-liquid interfaces involves a complex set of processes, which include band bending, built-in electric fields, surface recombination of photoexcited carriers, and ultimately charge transfer to the ions in solution, in which the electrostatic fields within the depletion region of the semiconductor plays an important role. There are loss mechanisms associated with each of these key components in the overall photoelectrochemical conversion efficiency. Direct probe of these elementary processes is key to the rational improvement of photoeletrochemical cells and electrodes. In this collaborative project, Tianquan Lian at Emory University, Steve Cronin at University of Southern California and their students and postdoctoral fellows carried out a series of studies that are aimed at direct observation of photoexcited charge carrier dynamics at photocatalytic semiconductor/liquid interfaces. The collaborative work led to the development of transient reflectance spectroscopy as a tool for in situ probing of carrier dynamics in planar photoelectrode/electrode interface; and the demonstration that this tool can be used to study oxide protected GaP to identify key efficiency limiting factors in these photoelectrodes. This work has led to the development a tool for in situ probing of carrier dynamics in planar photoelectrodes, which will facilitate the mechanistic study of photoelectrochemical cells. This work informs the development of better photoelectrode materials for solar water splitting and CO 2 reduction. This work has contributed to the training of three PhD students in the area of photoelectrochemistry, ultrafast spectroscopy and solar energy conversion

14 SOLAR ENERGY↗
DOE OSTI2025

Temperature Evolution of the Activation Barriers Leads to Meyer−Neldel Rules for Structural Relaxation and Transport in Polymers

Understanding activation barriers controlling structural relaxation in glass-forming liquids, molecular transport, and ionic conductivity in amorphous polymers is a grand challenge of fundamental scientific and materials engineering interest across disciplines. Over decades, intriguing but puzzling empirical correlations between the elementary time scale of activated barrier crossing and the apparent Arrhenius activation energy, the so-called Meyer−Neldel (MN) rules, have been discovered in diverse liquids and glasses. Here, in this study, we formulate and successfully apply a new experimental analysis and an explicitly dynamical theoretical framework which provides an understanding of the origin, validity, and failure of such correlations, that bridge and unify the three fields of structural relaxation, molecular transport, and ionic conductivity in liquids and quenched glasses. Distinct quasi-universal laws are predicted in equilibrated liquids and nonequilibrium glasses, consistent with experiments. Our analysis reveals that even if the relaxation appears Arrhenius over a limited temperature range, the physical activation barrier is generally temperature-dependent in polymeric systems even below glass transition temperature. In addition, we show that the approximate validity of classical MN rules hinges on a linear temperature dependence of this barrier and the temperature range probed in experiments. Our findings are relevant for controlling the activation barrier in functional soft polymeric materials relevant to molecular separations, barrier coatings, and charge transport, and also provide new constraints on the theoretical understanding of the mechanism underlying slow activated dynamics in glass-forming condensed matter.

Meyer-Neldel rules↗
DOE OSTI2021

Investigation of post-injection strategies for diesel engine Catalyst Heating Operation using a vapor-liquid-equilibrium-based spray model

Most multidimensional engine simulations spend much time solving for non-equilibrium spray dynamics (atomization, collision, vaporization). However, their accuracy is limited by significant grid dependency, and the need for extensive calibration. This is critical for modeling cold-start diesel fuel post injections, which occur at low temperatures and pressures, far from typical model validation ranges. At the same time, resolving micron-scale spray phenomena would render full Eulerian multiphase calculations prohibitive. In this study, an improved phase equilibrium based approach was implemented and assessed for simulating diesel catalyst heating operation strategies. A phase equilibrium solver based on the model by Yue and Reitz [1] was implemented: a fully multiphase CFD solver is employed with an engineering-size engine grid, and fuel injection is modeled using the standard Lagrangian parcels approach. Mass and energy from the liquid parcels are released to the Eulerian multiphase mixture according to an equilibrium-based liquid jet model. An improved phase equilibrium solver was developed to handle large real-gas mixtures such as those from accurate chemical kinetics mechanisms. The liquid-jet model was improved such that momentum transfer to the Eulerian solver better reproduces the physical spray jet structure. Validation of liquid/vapor penetration predictions showed that the model yields accurate results with very limited tuning and low sensitivity to the few calibration constants. In-cylinder simulations of diesel catalyst heating operation strategies showed that capturing spray structure is paramount when short, transient injection pulses and low temperatures are present. Furthermore, the EP model provides improved predictions of post-injection spray structure and ignitability, while conventional spray modeling does not capture the increase of liquid penetration during the expansion stroke. Finally, the only important EP model calibration constant, Cliq, does not affect momentum transfer, but it changes the local charge cooling distribution through the local energy transfer, which makes it candidate to additional research. The results confirm that non-equilibrium spray processes do not need to be resolved in engineering simulations of high-pressure diesel sprays.

42 ENGINEERING↗
DOE OSTI2021

Cavity molecular dynamics simulations of vibrational polariton-enhanced molecular nonlinear absorption

We report recent experiments have observed that the chemical and photophysical properties of molecules can be modified inside an optical Fabry– Pérot microcavity under collective vibrational strong coupling (VSC) conditions, and such modification is currently not well understood by theory. In an effort to understand the origin of such cavity-induced phenomena, some recent studies have focused on the effect of the cavity environment on the nonlinear optical response of the molecular subsystem. Here, we use a recently proposed protocol for classical cavity molecular dynamics simulations to numerically investigate the linear and the nonlinear response of liquid carbon dioxide under such VSC conditions following an optical pulse excitation. We find that applying a strong pulse of excitation to the lower hybrid light–matter state, i.e., the lower polariton (LP), can lead to an overall molecular nonlinear absorption that is enhanced by up to two orders of magnitude relative to the excitation outside the cavity. This polariton-enhanced multiphoton absorption also causes an ultrashort LP lifetime (0.2 ps) under strong illumination. Unlike usual polariton relaxation processes—whereby polaritonic energy transfers directly to the manifold of singly excited vibrational dark states—under the present mechanism, the LP transfers energy directly to the manifold of higher vibrationally excited dark states; these highly excited dark states subsequently relax to the manifold of singly excited states with a lifetime of tens of ps. Because the present mechanism is generic in nature, we expect these numerical predictions to be experimentally observed in different molecular systems and in cavities with different volumes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of interaction strength of associating groups on linear and star polymer dynamics

A small number of associating groups incorporated onto a polymer backbone have dramatic effects on the mobility and viscoelastic response of the macromolecules in melts. These associating groups assemble, driving the formation of clusters, whose lifetime affects the properties of the polymers. In this study, we probe the effects of the interaction strength on the structure and dynamics of two topologies, linear and star polymer melts, and further investigate blends of associative and non-associating polymers using molecular dynamics simulations. Polymer chains of approximately one entanglement length are described by a bead–spring model, and the associating groups are incorporated in the form of interacting beads with an interaction strength between them that is varied from 1 to 20 k B T. We find that, for all melts and blends, interaction of a few k B T between the associating groups drives cluster formation, where the size of the clusters increases with increasing interaction strength. These clusters act as physical crosslinkers, which slow the chain mobility. Blends of chains with and without associating groups macroscopically phase separate for interaction strength between the associating groups of a few k B T and above. For weakly interacting associating groups, the static structure function S(q) is well fit by functional form predicted by the random phase approximation where a clear deviation occurs as phase segregation takes place, providing a quantitative assessment of phase segregation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Temperature-induced structural evolution in liquid Ag-Ga alloys

Temperature-dependent atomic structural evolutions of liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys have been studied by in situ high-energy x-ray-diffraction (HEXRD) experiments combined with ab initio molecular-dynamics simulations. The experimental data show a reversible structural crossover at about 1050 ~ 1100 (± 50) K in both liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys. Obvious changes of the electrical resistivity, absolute thermoelectric power, and atomic diffusivity around the similar temperature range for both Ag-Ga liquids strongly support the HEXRD results. The origin of the liquid-to-liquid crossover in both Ag-Ga liquids was suggested to link with the rearrangements of Ag and Ga atoms, i.e., Ag and Ga atoms prefer to associate with themselves in the higher temperature range above 1100 K, consistent with the accelerated increase of the strong covalently bonded Ga–Ga dimers in both Ag-Ga liquids. In addition, more studies from the energy aspect are still desirable to understand the rearrangements of Ag and Ga atoms in the higher temperature range in both Ag-Ga liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Control of Permanent Porosity in Type 3 Porous Liquids via Solvent Clustering

Porous liquids (PLs) are an exciting new class of materials for carbon capture due to their high gas adsorption capacity and ease of industrial implementation. They are composed of sorbent particles suspended in a nonadsorbed solvent, forming a liquid with permanent porosity. While PLs have a vast number of potential compositions based on the number of solvents and sorbent materials available, most of the research has been focused on the selection of the sorbent rather than the solvent. Therefore, PL design criteria on the supramolecular structures of the solvent are explored to create a fundamental understanding of how the solvent enables PL formation for rapid discovery of new PL compositions. Atomistic molecular dynamics simulation of eight solvents with a range of molecular sizes, shapes, and intramolecular bonding was performed, identifying that the shape and size of molecular clusters formed in the solvent are the driving predictor of PL formation rather than the size of the individual solvent molecule. The results demonstrate a significant departure from common approaches to PL formation based on the steric exclusion of solvent molecules from the sorbent via the size of the pore aperture. A modeling and experimental validation study further supports these findings. In conclusion, through this computational material design study, a previously unexplored mechanism in PL formation, solvent–solvent clustering, is identified as a critical factor for the accelerated discovery of liquid phase carbon capture materials.

Carbon capture↗
DOE OSTI2020

Liquid Structure and Transport Properties of the Deep Eutectic Solvent Ethaline

A range of techniques including physical property measurements, neutron scattering experiments, ab initio molecular dynamics, and classical molecular dynamics simulations are used to probe the structural, thermodynamic, and transport properties of a deep eutectic solvent comprised of a 1:2 molar ratio of choline chloride and ethylene glycol. This mixture, known as Ethaline, has many desirable properties for use in a range of applications, and therefore, understanding its liquid structure and transport properties is of interest. Simulation results are able to capture experimental densities, diffusivities, viscosities, and structure factors extremely well. Here, the solvation environment is dynamic and dominated by different hydrogen bonding interactions. Dynamic heterogeneities resulting from hydrogen bonding interactions are quantified. Rotational dynamics of molecular dipole moments of choline and ethylene glycol are computed and found to exhibit a fast and slow mode.

25 ENERGY STORAGE↗
DOE OSTI2024

Molecular beam scattering from flat jets of liquid dodecane and water

Abstract Molecular beam experiments in which gas molecules are scattered from liquids provide detailed, microscopic perspectives on the gas–liquid interface. Extending these methods to volatile liquids while maintaining the ability to measure product energy and angular distributions presents a significant challenge. The incorporation of flat liquid jets into molecular beam scattering experiments in our laboratory has allowed us to demonstrate their utility in uncovering dynamics in this complex chemical environment. Here, we summarize recent work on the evaporation and scattering of Ne, CD 4 , ND 3 , and D 2 O from a dodecane flat liquid jet and present first results on the evaporation and scattering of Ar from a cold salty water jet. In the evaporation experiments, Maxwell–Boltzmann flux distributions with a cos θ angular distribution are observed. Scattering experiments reveal both impulsive scattering (IS) and trapping followed by thermal desorption (TD). Super‐specular scattering is observed for all four species scattered from dodecane and is attributed to anisotropic momentum transfer to the liquid surface. In the IS channel, rotational excitation of the polyatomic scatterers is a significant energy sink, and these species accommodate more readily on the dodecane surface compared to Ne. Our preliminary results on cold salty water jets suggest that Ar atoms undergo some vapor‐phase collisions when evaporating from the liquid surface. Initial scattering experiments characterize the mechanisms of Ar interacting with an aqueous jet, allowing for comparison to dodecane systems. Key Points Molecular beam scattering from flat liquid jets is a powerful technique to elucidate mechanistic detail at the gas–liquid interface. Previous dodecane scattering experiments have uncovered angularly‐resolved thermal desorption fractions and energy transfer at the interface for several small molecule scatterers. Preliminary results on scattering from cold salty water reveal mechanisms of interaction between argon and an aqueous jet.

Yang, Walt↗
DOE OSTI2021

Enhancing ion transport in charged block copolymers by stabilizing low symmetry morphology: Electrostatic control of interfaces

Recently, the interest in charged polymers has been rapidly growing due to their uses in energy storage and transfer devices. Yet, polymer electrolyte-based devices are not on the immediate horizon because of the low ionic conductivity. In the present study, we developed a methodology to enhance the ionic conductivity of charged block copolymers comprising ionic liquids through the electrostatic control of the interfacial layers. Unprecedented reentrant phase transitions between lamellar and A15 structures were seen, which cannot be explained by well-established thermodynamic factors. X-ray scattering experiments and molecular dynamics simulations revealed the formation of fascinating, thin ionic shell layers composed of ionic complexes. The ionic liquid cations of these complexes predominantly presented near the micellar interfaces if they had strong binding affinity with the charged polymer chains. Therefore, the interfacial properties and concentration fluctuations of the A15 structures were crucially dependent on the type of tethered acid groups in the polymers. Overall, the stabilization energies of the A15 structures were greater when enriched, attractive electrostatic interactions were present at the micellar interfaces. Contrary to the conventional wisdom that block copolymer interfaces act as “dead zone” to significantly deteriorate ion transport, this study establishes a prospective avenue for advanced polymer electrolyte having tailor-made interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ion-gated carbon molecular sieve gas separation membranes

Membrane technology lies at the heart of many industrial gas separation processes and applications. Molecular sieving membranes that break the Robeson limit are desirable for energy-efficient gas separation. In this paper, we report a facile strategy of directly integrating ionic liquids (ILs) into porous membranes. Particularly, the ILs form an ultra-thin layer on the carbon molecular sieve (CMS) membranes rather than penetrating into the pores, acting as a smart gate for gas entry to boost the selectivity. The hybrid membrane exhibits CO 2 permeability >600 barrer and enhanced CO 2 /N 2 selectivity >50, which surpasses the Robeson limit and shows potential in CO 2 /N 2 separation process. Molecular dynamics simulations confirm the gating effect of the IL layer of molecular thickness. In conclusion, this work demonstrates a universal strategy to improve CMS membrane performance by creating an IL-membrane interface and tuning the ion-pore interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗