Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “iron based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Steady-state wear and friction in boundary lubrication studies

A friction and wear study was made at 20 C to obtain improved reproducibility and reliability in boundary lubrication testing. Ester-base and C-ether-base fluids were used to lubricate a pure iron rider in sliding contact with a rotating M-50 steel disk in a friction and wear apparatus. Conditions included loads of 1/2 and 1 kg and sliding velocities of 3.6 to 18.2 m/min in a dry air atmosphere and stepwise time intervals from 1 to 250 min for wear measurements. The wear rate results were compared with those from previous studies where a single 25 min test period was used. Satisfactory test conditions for studying friction and wear in boundary lubrication for this apparatus were found to be 1 kg load; sliding velocities of 7.1 to 9.1 m/min (50 rpm disk speed); and use of a time stepwise test procedure. Highly reproducible steady-state wear rates and steady-state friction coefficients were determined under boundary conditions. Wear rates and coefficients of friction were constant following initially high values during run-in periods.

Loomis, W. R.↗
NASA NTRS1981

Evaluation of boundary lubricants using steady-state wear and friction

A friction and wear study was made at 20 C to establish operating limits and procedures for obtaining improved reproducibility and reliability in boundary lubrication testing. Ester base and C-other base fluids were used to lubricate a pure iron rider in sliding contact with a rotating M-50 steel disk in a pin-on-disk apparatus. Results of a parametric study with varying loads and speeds slowed that satisfactory test conditions for studying the direction and wear characteristics in the boundary lubrication regime with this test device were found to be 1 kilogram load; 7 to 9 meters-per-minute (50 rpm) surface speed; dry air test atmosphere (less than 100 ppm H2O); and use of a time stepwise procedure for measuring wear. Highly reproducible steady-state wear rates resulted from the two fluid studies which had a linearity of about 99 percent after initially higher wear rates and friction coefficients during run-in periods of 20 to 40 minutes.

Loomis, W. R.↗
DOE OSTI2025

Simulating regional workforce impacts of decarbonizing integrated steelmaking

Global efforts to mitigate climate change are increasing pressure on heavy manufacturing industries to decarbonize production. The iron and steel industry is responsible for 7% of CO 2 emissions globally (2% in the United States) and is often a major employer in the regions where iron and steel is produced. Understanding the future prospects for workers in regions with high CO 2 emitting industries—including impacts of phasing out or evolving such industries—will be critical for informing regional economic and clean energy strategies. We simulate the impact of an “in-place” transition that replaces today’s integrated production with direct reduced iron (DRI) used in electric arc furnaces (EAFs), using Southwest Pennsylvania as an application of our generalizable approach. Our results suggest that the integrated steelmaking workforce today has the skills, knowledge, and abilities (SKAs) to fill over 95% of all jobs required by DRI/EAF facilities, but the number of jobs is only 25% of those at integrated plants. We also find that some occupational groups have greater general transferability into the broader job market, while other groups, such as production workers, are ill-equipped today based on current SKAs to transition out of the iron and steel industry. Our methodology further suggests factors that limit transitions: Around 85% of occupations are more limited by missing skills, while 15% are more limited by insufficient wages. These results may help to improve the design of social policy and the targeting of retraining programs, while the simulation approach can be readily adapted for other regions and industries.

decarbonization↗
NASA NTRS1981

Experimental and Theoretical Studies of Interstellar Grains

Steady state vibrational populations of SiO and CO in dilute black body radiation fields were calculated as a function of total pressure, kinetic temperature and chemical composition of the gas. Approximate calculations for polyatomic molecules are presented. Vibrational disequilibrium becomes increasingly significant as total pressure and radiation density decrease. Many regions of postulated grain formation are found to be far from thermal equilibrium before the onset of nucleation. Calculations based upon classical nucleation theory or equilibrium thermodynamics are expected to be of dubious value in such regions. Laboratory measurements of the extinction of small iron and magnetite grains were made from 195 nm to 830 nm and found to be consistent with predictions based upon published optical constants. This implies that small iron particles are not responsible for the 220 nm interstellar extinction features. Additional measurements are discussed.

Nuth, J. A., III↗
NASA NTRS1990

The C shell, an active detector of UH nuclei

This paper gives a brief description of the current status of the present program to develop a modular array of large electronic particle detectors. These modules were designed to study the UH nuclei in the cosmic radiation with eventual deployment on the Space Station or at a lunar base. This array would determine the abundances of elements from iron to the actinides and directly measure the energies of the lower energy nuclei. If the array was deployed on the Space Station, it would use the geomagnetic threshold to place limits on the higher energy nuclei, thus studying the energy spectrum up to about 10 GeV/n. Deployed at a lunar base, it would detect nuclei with energies down to the instrumental limit. Smaller versions could be flown on balloons to test and refine the modules.

Waddington, C. J.↗
NASA NTRS2017

Ionic Liquids Enabling Revolutionary Closed-Loop Life Support

Minimizing resupply from Earth is essential for future long duration manned missions. The current oxygen recovery system aboard the International Space Station is capable of recovering approximately 50% of the oxygen from metabolic carbon dioxide. For long duration manned missions, a minimum of 75% oxygen recovery is targeted with a goal of greater than 90%. Theoretically, the Bosch process can recover 100% of oxygen, making it a promising technology for oxygen recovery for long duration missions. However, the Bosch process produces elemental carbon which ultimately fouls the catalyst. Once the catalyst performance is compromised, it must be replaced resulting in undesired resupply mass. Based on the performance of a Bosch system designed by NASA in the 1990's, a three year Martian mission would require approximately 1315 kg (2850 lbs) of catalyst resupply. It may be possible to eliminate catalyst resupply with a fully regenerable system using an Ionic Liquid (IL)-based Bosch system. In 2016, we reported the feasibility of using ILs to produce an iron catalyst on a copper substrate and to regenerate the iron catalyst by extracting the iron from the copper substrate and product carbon. Additionally, we described a basic system concept for an IL-based Bosch. Here we report the results of efforts to scale catalyst preparation, catalyst regeneration, and to scale the carbon formation processing rate of a single reactor.

Brown, Brittany R.↗
NASA NTRS2017

Ionic Liquids Enabling Revolutionary Closed-Loop Life Support

Minimizing resupply from Earth is essential for future long duration manned missions. The current oxygen recovery system aboard the International Space Station is capable of recovering approximately 50% of the oxygen from metabolic carbon dioxide. For long duration manned missions, a minimum of 75% oxygen recovery is targeted with a goal of greater than 90%. Theoretically, the Bosch process can recover 100% of oxygen, making it a promising technology for oxygen recovery for long duration missions. However, the Bosch process produces elemental carbon which ultimately fouls the catalyst. Once the catalyst performance is compromised, it must be replaced resulting in undesired resupply mass. Based on the performance of a Bosch system designed by NASA in the 1990's, a three year Martian mission would require approximately 1315 kg (2850 lbs) of catalyst resupply. It may be possible to eliminate catalyst resupply with a fully regenerable system using an Ionic Liquid (IL)-based Bosch system. In 2016, we reported the feasibility of using ILs to produce an iron catalyst on a copper substrate and to regenerate the iron catalyst by extracting the iron from the copper substrate and product carbon. Additionally, we described a basic system concept for an IL-based Bosch. Here we report the results of efforts to scale catalyst preparation, to scale catalyst regeneration, and to scale the carbon formation processing rate of a single reactor.

Brown, Brittany R.↗
NASA NTRS2000

Role of hypoxia-inducible factor-1 in transcriptional activation of ceruloplasmin by iron deficiency

A role of the copper protein ceruloplasmin (Cp) in iron metabolism is suggested by its ferroxidase activity and by the tissue iron overload in hereditary Cp deficiency patients. In addition, plasma Cp increases markedly in several conditions of anemia, e.g. iron deficiency, hemorrhage, renal failure, sickle cell disease, pregnancy, and inflammation. However, little is known about the cellular and molecular mechanism(s) involved. We have reported that iron chelators increase Cp mRNA expression and protein synthesis in human hepatocarcinoma HepG2 cells. Furthermore, we have shown that the increase in Cp mRNA is due to increased rate of transcription. We here report the results of new studies designed to elucidate the molecular mechanism underlying transcriptional activation of Cp by iron deficiency. The 5'-flanking region of the Cp gene was cloned from a human genomic library. A 4774-base pair segment of the Cp promoter/enhancer driving a luciferase reporter was transfected into HepG2 or Hep3B cells. Iron deficiency or hypoxia increased luciferase activity by 5-10-fold compared with untreated cells. Examination of the sequence showed three pairs of consensus hypoxia-responsive elements (HREs). Deletion and mutation analysis showed that a single HRE was necessary and sufficient for gene activation. The involvement of hypoxia-inducible factor-1 (HIF-1) was shown by gel-shift and supershift experiments that showed HIF-1alpha and HIF-1beta binding to a radiolabeled oligonucleotide containing the Cp promoter HRE. Furthermore, iron deficiency (and hypoxia) did not activate Cp gene expression in Hepa c4 hepatoma cells deficient in HIF-1beta, as shown functionally by the inactivity of a transfected Cp promoter-luciferase construct and by the failure of HIF-1 to bind the Cp HRE in nuclear extracts from these cells. These results are consistent with in vivo findings that iron deficiency increases plasma Cp and provides a molecular mechanism that may help to understand these observations.

NASA Discipline Cardiopulmonary↗
NASA NTRS1984

On the brittle-ductile behavior of iron meteorites - New experimental constraints

Impact trials were performed at the NASA vertical gun range to study low-temperature brittle-ductile transitions in meteoritic, steel and iron targets. The trials were performed to enhance the data base underlying the concept of formation of planetesimals in collisional coagulation. Impact velocities of 1.6-5.5 km/sec were used, as were temperatures from 100-300 K. Spallation was observed in the tests with meteorite samples, even at room temperature, and brittleness was enhanced at temperature below 200 C. Net mass losses were induced at the higher impact velocities. It is suggested that iron meteorite agglomerations could form in the inner solar region during nebular condensation, but would not form in farther-out regions such as the asteroid belt. The protoplanets could have an iron core, with metallicity decreasing with radius from the core, which may have happened with the earth.

Matsui, T.↗
DOE OSTI2021

Effects of nanoconfinement and surface charge on iron adsorption on mesoporous silica

Here, we present a combined molecular dynamics (MD) simulation and X-ray absorption fine structure (XAFS) spectroscopic investigation of aqueous iron adsorption on nanoconfined amorphous silica surfaces. The simulation models examine the effects of pore size, pH (surface charge), iron valency, and counter-ion (chloride or hydroxide). The simulation methods were validated by comparing the coordination environment of adsorbed iron with coordination numbers and bond lengths derived from XAFS. In the MD models, nanoconfinement effects on local iron coordination were investigated by comparing results for unconfined silica surfaces and in confined domains within 2 nm, 4 nm, and 8 nm pores. Experimentally, coordination environments of iron adsorbed onto mesoporous silica with 4 nm and 8 nm pores at pH 7.5 were investigated. The effect of pH in the MD models was included by simulating Fe(II) adsorption onto negatively charged SiO 2 surfaces and Fe(III) adsorption on neutral surfaces. The simulation results show that iron adsorption depends significantly on silica surface charge, as expected based on electrostatic interactions. Adsorption on a negatively charged surface is an order of magnitude greater than on the neutral surface, and simulated surface coverages are consistent with experimental results. Pore size effects from the MD simulations were most notable in the adsorption of Fe(II) at deprotonated surface sites (SiO - ), but adsorption trends varied with concentration and aqueous Fe speciation. The coordination environment of adsorbed iron varied significantly with the type of anion. Considerable ion pairing with hydroxide anions led to the formation of oligomeric surface complexes and aqueous species, resulting in larger iron hydroxide clusters at higher surface loadings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Alternative reductants for foam control during vitrification of high-iron High Level Waste (HLW) feeds

Foaming during vitrification of radioactive waste in Joule-Heated Ceramic Melters (JHCM) is exacerbated by trapping of evolving gases, such as CO 2 , NO x and O 2 , beneath a viscous reaction layer. Foaming restricts heat transfer during melting. Sucrose is employed as the baseline additive at the Hanford site in Washington State, USA to reduce foaming. Alternative carbon-based reductant additives were explored in simulated, inactive Hanford high-iron HLW-NG-Fe2 feeds, for both their effect on foaming and to give insight to the behaviour of multivalent species in glass melts under different redox conditions. Graphite, coke (93% C), formic acid and HEDTA additives were compared with sucrose, and a feed with no additive. Graphite and coke additions proved most effective in reducing the maximum foam volume by 51 ± 3% and 54 ± 2%, respectively, compared with 24 ± 5% for sucrose. Lower foaming could result in more efficient vitrification in JHCMs. Reductants also affected redox ratios in the multivalent species present in the feed. The order of reduction, Mn 3+ /Mn 2+ > Cr 6+ /Cr 3+ > Ce 3+ /Ce 4+ > Fe 3+ /Fe 2+ was as predicted on the basis of their redox potentials. There is less reduction overall, particularly in the Fe 3+ → Fe 2+ , than predicted by the calculations, attributed to the oxygenated atmosphere of the experiments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Leptothrix ochracea genomes reveal potential for mixotrophic growth on Fe(II) and organic carbon

ABSTRACT Leptothrix ochracea creates distinctive iron-mineralized mats that carpet streams and wetlands. Easily recognized by its iron-mineralized sheaths, L. ochracea was one of the first microorganisms described in the 1800s. Yet it has never been isolated and does not have a complete genome sequence available, so key questions about its physiology remain unresolved. It is debated whether iron oxidation can be used for energy or growth and if L. ochracea is an autotroph, heterotroph, or mixotroph. To address these issues, we sampled L. ochracea -rich mats from three of its typical environments (a stream, wetlands, and a drainage channel) and reconstructed nine high-quality genomes of L. ochracea from metagenomes. These genomes contain iron oxidase genes cyc2 and mtoA, showing that L. ochracea has the potential to conserve energy from iron oxidation. Sox genes confer potential to oxidize sulfur for energy. There are genes for both carbon fixation (RuBisCO) and utilization of sugars and organic acids (acetate, lactate, and formate). In silico stoichiometric metabolic models further demonstrated the potential for growth using sugars and organic acids. Metatranscriptomes showed a high expression of genes for iron oxidation; aerobic respiration; and utilization of lactate, acetate, and sugars, as well as RuBisCO, supporting mixotrophic growth in the environment. In summary, our results suggest that L. ochracea has substantial metabolic flexibility. It is adapted to iron-rich, organic carbon-containing wetland niches, where it can thrive as a mixotrophic iron oxidizer by utilizing both iron oxidation and organics for energy generation and both inorganic and organic carbon for cell and sheath production. IMPORTANCE Winogradsky's observations of L. ochracea led him to propose autotrophic iron oxidation as a new microbial metabolism, following his work on autotrophic sulfur-oxidizers. While much culture-based research has ensued, isolation proved elusive, so most work on L. ochracea has been based in the environment and in microcosms. Meanwhile, the autotrophic Gallionella became the model for freshwater microbial iron oxidation, while heterotrophic and mixotrophic iron oxidation is not well-studied. Ecological studies have shown that Leptothrix overtakes Gallionella when dissolved organic carbon content increases, demonstrating distinct niches. This study presents the first near-complete genomes of L. ochracea , which share some features with autotrophic iron oxidizers, while also incorporating heterotrophic metabolisms. These genome, metabolic modeling, and transcriptome results give us a detailed metabolic picture of how the organism may combine lithoautotrophy with organoheterotrophy to promote Fe oxidation and C cycling and drive many biogeochemical processes resulting from microbial growth and iron oxyhydroxide formation in wetlands.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1987

Discovery of M class objects among the near-earth asteroid population

Broadband colorimetry, visual photometry, near-infrared photometry, and 10 and 20 micron radiometry of the near-earth asteroids (NEAs) 1986 DA and 1986 EB are used to show that these objects belong to the M class of asteroids. The similarity among the distributions of taxonomic classes among the 38 NEAs to the abundances found in the inner astoroid belt between the 3:1 and 5:2 resonances suggests that NEAs have their origins among asteroids in the vicinity of these resonances. The implied mineralogy of 1986 DA and 1986 EB is mostly nickel-iron metal; if this is indeed the case, then current models for meteorite production based on strength-related collisional processes on asteroidal surfaces predict that these two objects alone should produce about one percent of all meteorite falls. Iron meteorites derived from these near-earth asteroids should have low cosmic-ray exposure ages.

Tedesco, Edward F.↗
DOE OSTI2023

The effects of Fe and Al on the phase transformations and mechanical behavior of β-Ti alloy Ti-11at.%Cr

Alloy composition is important for developing desired microstructures in beta-titanium (β-Ti) alloys during thermomechanical processing. In this work, the relatively low-cost alloying elements iron (Fe) and aluminum (Al) were added to a base Ti-11at%chromium (Cr) alloy and in-situ and ex-situ examination of the microstructural evolution and mechanical properties during tension, hardness, elevated temperature X-ray diffraction (XRD) and resonance ultrasound spectroscopy (RUS) were performed. The 400 °C XRD revealed that Ti-11at%Cr underwent β-to-ω and β-to-α transformations. Adding 0.85at% Fe reduced the volume fraction of the ω- and α-phases, and adding 5.3at% Al inhibited the β-to-ω transformation. The 400 °C RUS showed that the alloys containing the ω phase exhibited an increase in shear modulus (G) of ~140%, while the ω-free alloys exhibited an increase of only ~102%. The hardness and strength values of the ω-containing Ti-11Cr and Ti-11Cr-0.85Fe increased with increased ω-phase volume fraction when the ω/α ratio was greater than 0.25. The relationship between ω/α volume ratios and mechanical properties is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bioavailable soil Pb minimized by in situ transformation to plumbojarosite

Exposure to lead (Pb) during early life has persistent adverse health effects. During childhood, ingestion of bioavailable Pb in contaminated soils can be a major route of Pb absorption. Remediation to alter physiochemical properties of soil-borne Pb can reduce Pb bioavailability. Our laboratory-based approach for soil Pb remediation uses addition of iron (Fe) sulfate and application of heat to promote formation of plumbojarosite (PLJ), a sparingly soluble Pb-Fe hydroxysulfate mineral. We treated two soils with anthropogenic Pb contamination and samples of clean topsoil spiked with various Pb compounds (i.e., carbonate, chloride, phosphate [P], or sulfate) to convert native Pb species to PLJ and used a mouse assay to assess relative bioavailability (RBA) of Pb in untreated (U) and remediated soils. Bone and blood Pb levels were significantly lower (P < 0.001, Student's t test) in mice that consumed diets amended with remediated soils than with U soils. Estimated RBA for Pb in both remediated natural soils and Pb-mineral spiked soils were reduced by >90% relative to Pb RBA for U soils, which is substantially more effective than other soil amendments, including P. X-ray absorption spectroscopy showed that >90% of all Pb species in remediated soils were converted to PLJ, and ingested PLJ was not chemically transformed during gastrointestinal tract transit. Post treatment neutralization of soil pH did not affect PLJ stability, indicating the feasibility in field conditions. These results suggest that formation of PLJ in contaminated soils can reduce the RBA of Pb and minimize this medium’s role as a source of Pb exposure for young children.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1974

The Ellicott meteorite

Two medium octahedrite iron meteorites recently found near Ellicott, Colorado, are described and compared to a medium octahedrite iron meteorite discovered in 1902 at nearby Franceville, Colo. Based on the Ni, Ga, Ge, and Ir contents, the pronounced differences in shock history, and the differences in average kamacite bandwidth, it is clear that Ellicott is a new meteorite, distinct from the Franceville find.

Olsen, E. J.↗
NASA NTRS1980

Physiochemical, site, and bidirectional reflectance factor characteristics of uniformly moist soils

The author has identified the following significant results. The bidirectional reflectance factor (0.5 micron to 2.3 micron wavelength interval) and physiochemical properties of over 500 soils from 39 states, Brazil and Spain were measured. Site characteristics of soil temperature regime and moisture zone were used as selection criteria. Parent material and internal drainage were noted for each soil. At least five general types of soil reflectance curves were identified based primarily on the presence or absence of ferric iron absorption bands, organic matter content, and soil drainage characteristics. Reflectance in 10 bands across the spectrum was found to be negatively correlated with the natural log of organic matter content.

Stoner, E. R.↗