Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interphases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Degradation in Ni-Rich LiNi 1– x – y Mn x Co y O 2 /Graphite Batteries: Impact of Charge Voltage and Ni Content

Ni-rich LiNi 1– x–y Mn x CoyO 2 (NMC) materials are attractive as cathodes for Li-ion batteries due to their high energy density and low Co content. However, these materials may display poor electrochemical reversibility relating to structural and interfacial instabilities. The influence of Ni content and level of delithiation during charge on degradation mechanisms and relevance to electrochemical cycling behavior are probed for LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode materials in a full cell configuration under two upper voltage limits (4.1 and 4.3 V). The combined use of dQ/dV analysis of electrochemical voltage profiles, operando XRD, and postcycling scanning electron microscopy (SEM) measurements indicates that a major contributor to capacity fade is the large anisotropic volume change from an H2 $\leftrightarrows$ H3 phase transition and associated mechanical degradation particularly for NMC811. Notably, transition metal dissolution and deposition on the negative electrode are found to correlate with the structural changes occurring in the cathode under high voltage charge. X-ray photoelectron spectroscopy (XPS) analyses of the cycled cathodes reveal a more organic-rich cathode–electrolyte interphase (CEI) when cycling to 4.3 V with lower relative amounts of LiF. Surface reconstruction is not a significant factor under these cycling conditions as determined by soft X-ray absorption spectroscopy (sXAS) analysis. The results emphasize the opportunity to match the electrochemical test parameters with the specific NMC active material to mitigate degradation and extend cycle life.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analysis of Degradation and Electrochemical Behavior of Lithium–Oxygen Batteries under Lean Electrolyte Conditions

Lithium-oxygen batteries have garnered much attention in the past decades due to their high energy density and active material abundancy. Decreasing the electrolyte volume is critical to achieving a high energy density for practical applications. Recent works have demonstrated a serious performance limitation at lower electrolyte fillings. Here, in this work, we study specifically the difference between flooded and lean electrolyte lithium-oxygen batteries by systematically tracing the source of performance degradation. We find that the key contributor to the decrease in performance under lean electrolyte conditions stems from the lithium metal anode rather than the cathode. Solid electrolyte interphase (SEI) compositionally appears to be the same from X-ray photoelectron spectroscopy but the coverage is less uniform, and impedance is much higher under lean electrolyte conditions. Such an effect likely produced the observed poorer cycle performance at 10 μL cm -2 (similar to 28% cathode's pore volume filled) vs 100 μL cm -2 (278% of cathode's pore volume) at a capacity of 1.0 mAh cm -2 (0.1 mAh cm -2 ) using an electrolyte composition of 1 M LiTFSI in TEGDME.

Córdoba, Daniel [Argonne National Laboratory (ANL)↗
DOE OSTI2023

The Relationship between Ionic Conductivity and Solvation Structures of Localized High-Concentration Fluorinated Electrolytes for Lithium-Ion Batteries

Localized high concentration electrolyte (LHCE) combines a diluent with high concentration electrolyte (HCE), offering promising properties. The ions, solvent, and diluent interact to form a complex heterogenous liquid structure, where high salt concentration clusters are embedded in diluent. Optimizing LHCE for desired electrolyte properties like high ionic conductivity, low viscosity, effective solid electrolyte interphase (SEI) formability, within the vast chemical and compositional design space requires deeper understanding and theoretical guidance. For this work, we investigated the structures and conductivity of LHCEs based on a fluorinated solvent with two different diluents at varying concentrations. The 2,2,3,3-tetrafluoropropyl trifluoroacetate (TFPTFA) enters the solvation cluster due to its stronger Li-ion interactions, whereas 1,1,2,2-tetrafuoroethyl 2,2,2-trifuoroethyl ether (TFETFE) enters only at extremely high diluent concentrations. The ionic conductivity increases with decreasing diluent concentrations, with a slope change during cluster percolation. Overall, TFETFE demonstrates higher effectiveness than TFPTFA, forming higher local salt concentration clusters, and resulting in higher ionic conductivity.

cluster chemistry↗
DOE OSTI2025

Formation of Larger Solvation Shells in a LiFSI Salt Solution for Enhanced Li + Transport

Electrodes and electrolytes in Li-ion batteries (LIBs) are crucial for their electrochemical performance, and fabricating these materials to achieve the desired properties for improved efficiency is challenging. A recent study published in Nature ( Nature 2024, 627, 101−107) outlined guidelines for designing an electrolyte using fluoroacetonitrile (FACN), a small-molecule solvent with low solvation energy. This characteristic enables the formation of an anion-rich inorganic interphase in a 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) solution, facilitating higher ionic conductivity, even at low temperatures. The formation of a ligand channel was postulated and demonstrated in the simulation due to the attraction of small solvent molecules from the secondary solvation shell to the Li + ion in the primary solvation shell, thereby enhancing Li + transport. While that study primarily focused on Li + ion behavior in LIBs, the behavior of FACN in solutions with different lithium salts and what makes LiFSI in FACN outperform other systems remain to be explored. In conclusion, using an experimental technique sensitive to FACN molecules, here we directly observe formation of larger solvation shells in a LiFSI solution compared to the Li salts with different anions, consistent with the postulated ligand-channel-mechanism and potentially paving the way to achieving enhanced ionic conductivity and energy density during LIB operation.

Batteries↗
DOE OSTI2022

Flow Reduction in Pore Networks of Packed Silica Nanoparticles: Insights from Mesoscopic Fluid Models

A modified many-body dissipative particle dynamics (mDPD) model is rigorously calibrated to achieve realistic fluid–fluid/solid interphase properties and applied for mesoscale flow simulations to elucidate the transport mechanisms of heptane liquid and water, respectively, through pore networks formed by packed silica nanoparticles with a uniform diameter of 30 nm. Two million CPU core hours were used to complete the simulation studies. Results show reduction of permeability by 54–64% in heptane flow and by 88–91% in water flow, respectively, compared to the Kozeny–Carman equation. In these nanopores, a large portion of the fluids are in the near-wall regions and thus not mobile due to the confinement effect, resulting in reduced hydraulic conductivity. Moreover, intense oscillations in the calculated flow velocities also indicate the confinement effect that contests the external driven force to flow. Here, the generic form of Darcy’s law is considered valid for flow through homogeneous nanopore networks, while permeability depends collectively on pore size and surface wettability. This fluid-permeability dependency is unique to flow in nanopores. In addition, potential dependence of permeability on pore connectivity is observed when the porosity remains the same in different core specimens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

From Sodium–Oxygen to Sodium–Air Battery: Enabled by Sodium Peroxide Dihydrate

Metal-air batteries have attracted extensive research interests due to their high theoretical energy density. However, most of the previous studies were limited by applying pure oxygen in the cathode, sacrificing the gravimetric and volumetric energy density. Here, we develop a real sodium-"air" battery, in which the rechargeability of the battery relies on the reversible reaction of the formation of sodium peroxide dihydrate (Na 2 O 2 ∙ 2H 2 O). After an oxygen evolution reaction catalyst is applied, the charge overpotential is largely reduced to achieve a high energy efficiency. The sodium-air batteries deliver high areal capacity of 4.2 mAh.cm -2 and have a decent cycle life of 100 cycles. The oxygen crossover effect is largely suppressed by replacing the oxygen with air, whereas the dense solid electrolyte interphase formed on the sodium anode further prolongs the cycle life.

25 ENERGY STORAGE↗
DOE OSTI2021

In Situ Formation of Polycyclic Aromatic Hydrocarbons as an Artificial Hybrid Layer for Lithium Metal Anodes

Nonuniform Li deposition causes dendrites and low Coulombic efficiency (CE), seriously hindering the practical applications of Li metal. Herein, we developed an artificial solid-state interphase (SEI) with planar polycyclic aromatic hydrocarbons (PAHs) on the surface of Li metal anodes by a facile in situ formation technology. The resultant dihydroxyviolanthron (DHV) layers serve as the protective layer to stabilize the SEI. In addition, the oxygen-containing functional groups in the soft and conformal SEI film can regulate the diffusion and transport of Li ions to homogenize the deposition of Li metal. The artificial SEI significantly improves the CEs and shows superior cyclability of over 1000 h at 4 mAh cm –2 . The LiFePO 4 /Li cell (2.8 mAh cm –2 ) enables a long cyclability for 300 cycles and high CEs of 99.8%. Furthermore, this work offers a new strategy to inhibit Li dendrite growth and enlightens the design on stable SEI for metal anodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Resolving Current-Dependent Regimes of Electroplating Mechanisms for Fast Charging Lithium Metal Anodes

Poor fast-charge capabilities limit the usage of rechargeable Li metal anodes. Understanding the connection between charging rate, electroplating mechanism, and Li morphology could enable fast-charging solutions. In this report we develop a combined electroanalytical and nanoscale characterization approach to resolve the current-dependent regimes of Li plating mechanisms and morphology. Measurement of Li + transport through the solid electrolyte interphase (SEI) shows that low currents induce plating at buried Li||SEI interfaces, but high currents initiate SEI-breakdown and plating at fresh Li||electrolyte interfaces. The latter pathway can induce uniform growth of {110}-faceted Li at extremely high currents, suggesting ion-transport limitations alone are insufficient to predict Li morphology. At battery relevant fast-charging rates, SEI-breakdown above a critical current density produces detrimental morphology and poor cyclability. Thus, prevention of both SEI-breakdown and slow ion-transport in the electrolyte is essential. This mechanistic insight can inform further electrolyte engineering and customization of fast-charging protocols for Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Improving Interface Stability of Si Anodes by Mg Coating in Li-Ion Batteries

Silicon (Si) is a promising anode material for high-energy-density lithium-ion batteries (LIBs), but its short calendar life and poor cycling performance prevent its large-scale adoption. Introducing magnesium (Mg) salt into the electrolyte has been recently shown to form a ternary Li–Mg–Si Zintl phase upon lithiation of Si and improve the cycling performance. However, the ternary Zintl phase formation mechanism and its impact on the solid electrolyte interphase (SEI) are not yet well understood. In this work, we demonstrate the formation of a ternary Li–Mg–Si Zintl phase by Mg coating of the Si anode, where Mg diffuses into the Si film upon deposition and intermixes further during the lithiation process. The presence of the Zintl phase improves the interface stability, alters the nature of the SEI, and enhances the cycling performance of the Si anode. This study provides insights into the formation mechanism of the ternary Zintl phase and guidelines for the future design of Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Engineering the Si Anode Interface via Particle Surface Modification: Embedded Organic Carbonates Lead to Enhanced Performance

Si nanoparticles (SiNPs) are recognized as a promising anode material for next-generation high-energy lithium-ion batteries. However, due to the more stringent requirements resulting from severe volume change, the solid-electrolyte interphase (SEI) on SiNPs plays a critical role in determining their cycling performance. Engineering the interface for higher stability has become an effective yet challenging approach to accommodate the deterioration of the silicon anode from the repeated lithiation/delithiation process. Herein, we report a novel approach of engineering a covalently bonded organic monolayer of ethylene carbonates onto the surface of the SiNPs that can help form a sturdy SEI. Finally, this molecule-level surface modification provides an effective approach to enable high-energy lithium-ion batteries with Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Long-Term Cycling of a Mn-Rich High-Voltage Spinel Cathode by Stabilizing the Surface with a Small Dose of Iron

The high-voltage, cobalt-free spinel cathode LiNi 0.5 Mn 1.5 O 4 (LNMO) is receiving extensive attention for lithium-ion batteries due to its low cost, high operating voltage and energy density, superior power density, and good thermal stability. However, its high operating voltage hampers its stability with commercial electrolytes and makes its practical viability challenging. We present here a Mn-rich LNMO cathode to encourage the disordering of Mn and Ni in the lattice and the incorporation of a small dose of Fe into Mn-rich LNMO (Fe-LNMO) to improve the cycling stability. The introduction of Fe further increases the cation disorder between Mn and Ni, thus enabling a better rate capability. Electron energy loss spectroscopy analysis indicates that Fe is concentrated on the surface, and X-ray photoelectron spectroscopy analysis shows that Fe-LNMO alleviates the aggressive reaction between the cathode surface and the electrolyte, thus stabilizing the interface and cycle life. Furthermore, a full cell assembled with a graphite anode with an areal capacity of 3 mA h cm –2 displays a capacity retention of 90% over 300 cycles. Furthermore, the present work demonstrates an effective way to promote cation disordering and lower the surface reactivity of LNMO with the electrolyte, thereby enhancing the conductivity, stabilizing the cathode–electrolyte interphase, and making LNMO promising for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries

The development of lithium-metal batteries with good performance and long lifetimes requires fundamental insight into the mechanisms underlying performance improvements from individual design strategies and the interactions between multiple improvement approaches. Here, in this work, we investigated the individual and combined effects of applied pressure and a LiAsF 6 electrolyte additive on the performance of anode-free lithium-metal batteries; we employed various pressure application methods, which vary both in magnitude and uniformity. Both approaches individually improve cycling performance of anode-free lithium-metal batteries. Pressure increases the cycling efficiency at both the anode and cathode by promoting improved morphologies, while the LiAsF 6 additive additionally improves performance at the anode by enhancing the solid electrolyte interphase (SEI) properties. The combination of uniform applied pressure and a LiAsF 6 electrolyte additive produces lithium-metal batteries with cycling performance higher than can be achieved with either approach alone. This additional performance improvement is able to be realized due to the complementary rather than competitive nature of the mechanisms underlying applied pressure (lithium morphology) and electrolyte additives (SEI properties). Our results highlight the importance of moving beyond the investigation of isolated design strategies and demonstrate that superior cycling can be achieved by combining multiple approaches.

25 ENERGY STORAGE↗
DOE OSTI2023

Boosting the Low-Temperature Performance of Graphite Anodes by Creating an Electrochemically Active Interface

Graphite is the major anode material used in commercial lithium-ion batteries (LIBs). However, the sluggish ion-transfer kinetics associated with graphite anodes significantly restrict the operation of LIBs over a wide temperature. This is primarily due to their low reversible capacity and the substantial overpotential exhibited under low-temperature conditions. To address this limitation, we demonstrate herein an approach that involves grafting an electrochemically active lithium benzenesulfonate layer onto a graphite surface through a typical reduction reaction of diazonium cations, followed by ion exchange process. This surface modification reduces the charge transfer resistance of graphite anodes, leading to an excellent reversible capacity of ~150 mAh g –1 at low-temperatures (-20 °C, 0.1C). Electrochemical impedance spectroscopy indicates that both desolvation of the lithium ions outside the graphite, and lithium diffusion within the solid electrolyte interphase and graphite lattice are two crucial rate-limiting steps during the Li (de)lithiation, with the latter dominating during the low-temperature operation. In conclusion, these findings demonstrate a facile method for enhancing the low-temperature performance of graphite through surface modification and provide valuable insights into fundamental understandings that can guide the future design of better -low-temperature graphite anodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes

Previous studies have demonstrated that chemical vapor deposition carbon coating on silicon (Si@C) can enhance the electrochemical performance of lithium-ion batteries with Si-based anodes. However, the underlying mechanisms contributing to this improvement have not been fully explored. Here, we address this knowledge gap by applying a suite of characterization methods to evaluate Si@C anodes prepared by reducing acetylene on ball-milled Si particles. Raman mapping measurements show that the C coating (<5 nm thick) enables a homogeneous Si and carbon distribution during the slurry casting process, thereby promoting Si utilization during cycling. The coating’s microstructure and morphology were evaluated using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy, and neutron reflectivity experiments. Electrochemical impedance spectroscopy measurements upon cycling indicate that carbon coating also reduces the overall resistance as benchmarked against bare Si anodes. Galvanostatic cycling in half-cell studies revealed higher initial Coulombic efficiency and specific capacities with increasing carbon coating time. However, solid electrolyte interphase (SEI) investigations using XPS showed that the coated and uncoated samples have very similar characteristics, suggesting that the SEI may only play a minor role in enhancing the performance of Si@C. Full-cell evaluation of the Si electrodes was consistent with half-cell results relating to performance and SEI properties, further supporting the conclusion that electronic and ionic percolation, enabled by effective electrode manufacturing, are the dominant factors contributing to the favorable performance of Si@C.

25 ENERGY STORAGE↗
DOE OSTI2024

Quantifying the Correlation between Coordination Chemistry, Interfacial Formation, and Electrochemical Performances for Mg Battery Electrolytes

Here, the rise of magnesium batteries as promising post-Li-ion energy storage technologies has sparked considerable attention toward understanding the fundamental aspects of coordination chemistry concerning Mg cations in multivalent electrolytes. This exploration includes investigating how coordination influences crucial electrolyte properties like solubility, electroreduction stability, and the formation of the interphase, all of which are pivotal for practical battery applications. Despite recent progress in developing a few functional electrolytes, a comprehensive understanding of the solvation structure that can facilitate efficient Mg deposition performance and the formulation of general design rules based on the solvation structure is still lacking. In our study, we endeavor to establish a connection between solvent and anion interactions with Mg 2+ , interface formation, and cycling performance through a series of organic ether solvents (tetrahydrofuran, glyme, diglyme, and triglyme) and amine solvents (dimethylamine, 3-methoxypropylamine, and dimethoxyethylamine). Our findings reveal a distinct coordination trend for solvent/Mg 2+ and (Mg-TFSI):solvent across various solvents, which dictates the extent of ion pairing for TFSI salts with increasing solvent molecule size and denticity. The solvated species in the bulk electrolyte across different solvents lead to diverse interfacial chemistries with varying decomposition components. We also explore the cycling efficiency as well as Mg deposition overpotentials for different solvents. A correlation analysis was conducted to assess the interplay between the structure and performance. Lastly, we apply the insights gained from these results to tailor the relative anion/Mg 2+ coordination structures using cosolvent systems, aiming for improved cell performance.

25 ENERGY STORAGE↗
DOE OSTI2024

The Impact of Lithium Anode Interface on Capacity Fade in Polymer Electrolyte-Based Solid-State Batteries

This study investigates the Li stripping-plating morphology and failure mechanisms in full cells consisting of a solid polymer electrolyte (SPE) with two commercial Li anodes: Li chip and Li foil. The primary identified failure mechanism of the SPE cell is capacity fade, regardless of the Li manufacturer. While the cathode’s role in capacity fade is evident, the Li anode significantly influences cycling performance, with Li foil cells cycling 50% longer than Li chip cells, a statistical difference. Further, post-mortem scanning electron microscopy and X-ray photoelectron spectroscopy results attribute the Li chip’s faster capacity fade to a loss of contact and continuous growth of the solid electrolyte interphase (SEI). Conversely, Li foil maintains consistent contact with the solid polymer, displaying a thin and stable SEI. Additionally, failure mechanisms between a gel electrolyte in previous work and the dry SPE are compared.

25 ENERGY STORAGE↗
DOE OSTI2025

Enhanced Performance of Silicon Anodes through Hybrid Surface Engineering

Silicon (Si) is a promising anode material for nextgeneration lithium-ion batteries (LIBs) due to its high theoretical capacity. However, Si-containing anodes typically suffer from unacceptably short lives because of the unrestricted growth of the solid electrolyte interphase (SEI). Here, in this study, hybrid surface coatings are developed to stabilize the SEI in high loading pure Si anodes using atomic and molecular layer deposition. The coatings, consisting of LiF paired with lithicone, create an ionically conductive surface that enhances the capacity retention, rate performance, and longevity. Careful binder selection helps demonstrate the full utility of the coatings by enabling high loading electrodes to cycle continuously at current densities of 1200 mA/g Si . Uncoated controls, in comparison, fail within just 10 cycles at lower loadings. X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy are used to provide supporting evidence of the coating composition and efficacy. The data indicate that our lithicone coating is converted to Li 2 CO 3 upon cycling contributing to favorable LiF/Li 2 CO 3 interfaces that enhance the space-charge effect at the active material’s surface. When applied to electrodes made with thermally stable binders and increasingly higher loadings (approaching 5 mAh/cm 2 ), ion transport through the bulk electrode, rather than SEI growth, is shown to be the limiting factor. Furthermore, data suggests a favorable interaction between lithicone precursors and poly(acrylic acid) binders mitigates thermal decomposition at higher temperatures. The work presented here represents the successful realization of composite coatings containing LiF/Li 2 CO 3 components to stabilize high-loading Si anodes. This work helps inform advanced surface engineering strategies to achieve highly reversible, high-capacity Si anodes capable of fast charging for high-performance LIBs.

atomic layer deposition↗