Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Chemical Feedback in the Self-Assembly and Function of Air–Liquid Interfaces: Insight into the Bottlenecks of CO 2 Direct Air Capture

As fossil fuels remain a major source of energy throughout the world, developing efficient negative emission technologies, such as direct air capture (DAC), which remove carbon dioxide (CO 2 ) from the air, becomes critical for mitigating climate change. Although all DAC processes involve CO 2 transport from air into a sorbent/solvent, through an air–solid or air–liquid interface, the fundamental roles the interfaces play in DAC remain poorly understood. In this work, we study the interfacial behavior of amino acid (AA) solvents used in DAC through a combination of vibrational sum frequency generation spectroscopy and molecular dynamics simulations. This study revealed that the absorption of atmospheric CO 2 has antagonistic effects on subsequent capture events that are driven by changes in bulk pH and specific ion effects that feedback on surface organization and interactions. Among the three AAs (leucine, valine, and phenylalanine) studied, we identify and separate behaviors from CO 2 loading, chemical changes, variations in pH, and specific ion effects that tune structural and chemical degrees of freedom at the air–aqueous interface. The fundamental mechanistic findings described here are anticipated to enable new approaches to DAC based on exploiting interfaces as a tool to address climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of the Atomic Structure at the BiVO 4 /TiO 2 Interface on the Electronic Properties and Performance of BiVO 4 /TiO 2 Photoanodes

In photoelectrochemical cells, semiconductor electrodes are usually interfaced with protection layers to extend their stability. Ideally, the protection layer should not decrease photocurrent generation. Hence, the conduction band minimum (CBM) and valence band maximum (VBM) of the protection layer should appropriately align with those of the underlying semiconductor electrode to facilitate the desired interfacial charge transfer with minimal interfacial recombination. However, predicting interfacial band alignment can be challenging, as it may vary depending on the detailed interfacial atomic structure. Investigating the effect of the atomic structure at the semiconductor/protection layer junction on the band alignment is also challenging as it requires samples with varied interfaces without altering the semiconductor and protection layers. Here, we considered TiO 2 , the most widely used material as a protection layer, interfaced with a BiVO 4 photoanode, and we fabricated two n-type BiVO 4 (010)/TiO 2 photoanodes where a thin (∼4 nm) amorphous TiO 2 layer was deposited by atomic layer deposition (ALD). While the individual BiVO 4 (010) and TiO 2 layers were identical in these two samples, we modified the interfacial atomic structure at the BiVO 4 /TiO 2 junction by changing which precursor, Ti or O, was introduced first upon deposition of TiO 2 . By experimentally and computationally investigating the differences in these two samples, we show that the band alignments between BiVO 4 and TiO 2 at the interface may not be straightforwardly predicted by the CBM and VBM of bulk BiVO 4 and TiO 2 and that interfacial atomic arrangements can have a marked impact on the electronic properties and photoelectrochemical performance of the BiVO 4 (010)/TiO 2 photoanode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Thermodynamic Control of Interface Directs MnO 2 Nucleation Chemistry for Dense and Conformal Electrodeposition

Manganese dioxide (MnO 2 ) is widely recognized as a promising material for high-energy-density energy storage systems due to its broad applicability and facile electrodeposition. However, achieving uniform, thin, and high-mass-loading MnO 2 coatings on high-surface-area electrodes remains a significant challenge. Conventional electrodeposition methods typically yield nonuniform, thick layers with poor conductivity and limited material utilization, restricting their practical use. Here, we uncover a thermodynamically engineered vanadyl/pervanadyl (VO 2+ /VO 2 + ) interface that fundamentally reshapes MnO 2 electrodeposition chemistry, enabling highly uniform and dense coatings. Here, combining in situ AFM measurement, Classical Nucleation Theory, and Johnson–Mehl–Avrami–Kolmogorov modeling, we show that this interface reduces early-stage detectable MnO 2 island size by 35-fold and shifts the MnO 2 growth from diffusion-limited to reaction-limited progressive nucleation. This thermodynamically controlled interface yields highly dense and conformal MnO 2 films with record-high mass loading of 241 mg cm –2 (1607 mg cm –3 ) on 3D-printed graphene aerogels, without compromising porosity or inducing thickness gradient. As a prototype demonstration, the resulting MnO 2 electrodes deliver record-setting volumetric performance in both capacitors (106 F cm –3 ) and Zn//MnO 2 pouch cells (162 mAh cm –3 ). Beyond energy storage, our findings demonstrate the significance of thermodynamic interface control in MnO 2 nucleation chemistry for achieving dense and uniform coatings on various substrates, with implications for electrocatalysis, semiconductor processing, and advanced materials manufacturing.

Batteries↗
DOE OSTI2020

Visualization of Aluminum Ions at the Mica Water Interface Links Hydrolysis State-to-Surface Potential and Particle Adhesion

When hydrolyzable cations such as aluminum interact with solid-water interfaces, macroscopic interfacial properties (e.g., surface charge and potential) and interfacial phenomena (e.g., particle adhesion) become tightly linked with the microscopic details of ion adsorption and speciation. We use in situ atomic force microscopy to directly image individual aluminum ions at a mica-water interface and show how adsorbate populations change with pH and aluminum activity. Complementary streaming potential measurements then allow us to build a triple layer model (TLM) that links surface potentials to adsorbate populations, via equilibrium binding constants. Our model predicts that hydrolyzed species dominate the mica-water interface, even when unhydrolyzed species dominate the solution. Ab initio molecular dynamics (AIMD) simulations confirm that aluminum hydrolysis is strongly promoted at the interface. The TLM indicates that hydrolyzed adsorbates are responsible for surface-potential inversions, and we find strong correlations between hydrolyzed adsorbates and particle-adhesion forces, suggesting that these species mediate adhesion by chemical bridging.

Legg, Benjamin A.↗
DOE OSTI2021

Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation

Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi 2 O 3 cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi 2 O 3 cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi 2 O 3 clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evidence for anisotropic spin-triplet Andreev reflection at the 2D van der Waals ferromagnet/superconductor interface

Fundamental symmetry breaking and relativistic spin–orbit coupling give rise to fascinating phenomena in quantum materials. Of particular interest are the interfaces between ferromagnets and common s-wave superconductors, where the emergent spin-orbit fields support elusive spin-triplet superconductivity, crucial for superconducting spintronics and topologically-protected Majorana bound states. Here, we report the observation of large magnetoresistances at the interface between a quasi-two-dimensional van der Waals ferromagnet Fe 0.29 TaS 2 and a conventional s-wave superconductor NbN, which provides the possible experimental evidence for the spin-triplet Andreev reflection and induced spin-triplet superconductivity at ferromagnet/superconductor interface arising from Rashba spin-orbit coupling. The temperature, voltage, and interfacial barrier dependences of the magnetoresistance further support the induced spin-triplet superconductivity and spin-triplet Andreev reflection. This discovery, together with the impressive advances in two-dimensional van der Waals ferromagnets, opens an important opportunity to design and probe superconducting interfaces with exotic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In situ infrared nanospectroscopy of the local processes at the Li/polymer electrolyte interface

Solid-state batteries possess the potential to significantly impact energy storage industries by enabling diverse benefits, such as increased safety and energy density. However, challenges persist with physicochemical properties and processes at electrode/electrolyte interfaces. Thus, there is great need to characterize such interfaces in situ, and unveil scientific understanding that catalyzes engineering solutions. To address this, we conduct multiscale in situ microscopies (optical, atomic force, and infrared near-field) and Fourier transform infrared spectroscopies (near-field nanospectroscopy and attenuated total reflection) of intact and electrochemically operational graphene/solid polymer electrolyte interfaces. We find nanoscale structural and chemical heterogeneities intrinsic to the solid polymer electrolyte initiate a cascade of additional interfacial nanoscale heterogeneities during Li plating and stripping; including Li-ion conductivity, electrolyte decomposition, and interphase formation. Moreover, our methodology to nondestructively characterize buried interfaces and interphases in their native environment with nanoscale resolution is readily adaptable to a number of other electrochemical systems and battery chemistries.

42 ENGINEERING↗
DOE OSTI2025

Modulating physicochemical interfaces enables li-rich oxides based ceramic solid-state li batteries under ambient conditions

Li-rich layered oxides exhibit promising potential applications in high-energy-density solid-state lithium metal batteries. Nevertheless, the strong oxidative oxygen species generate at high voltage, which poses great challenges to positive electrode-side interface stability. Herein, a robust in-situ polymerization gel polymer electrolyte with bifunctional additives is designed for interface modification. These additives, include lithium difluoro(oxalate) borate and LiPO 2 F 2 , regulate the Li + chemical environment in gel polymer electrolyte to enhance crosslink density without residual oligomer, which reduce gas generation and suppress contact loss, thus avoiding interfacial impedance divergence. Concurrently, the designed gel polymer electrolyte enables a wide electrochemical stability window (up to 4.7 V) and a high Li + transference number (0.82). Additionally, the additives induced F- and B-rich inorganic cathode-electrolyte interphase inhibits side reactions and oxygen/transition metal loss effectively, stabilizing the chemical interface. The as-constructed Li-rich layered oxides-based ceramic solid-state lithium metal batteries with gel polymer electrolyte interface modification exert a high discharge capacity of 276.5 mAh g -1 at 30 °C without external pressure, delivering a retention of 81.7% after 100 cycles at 25 mA g -1 during 2.0-4.7 V. This work provides a guideline for developing high-voltage solid-state lithium metal batteries via interfacial design.

Hu, Xinchao [Xiamen University (China)]↗
DOE OSTI2023

Understanding hydrogen electrocatalysis by probing the hydrogen-bond network of water at the electrified Pt–solution interface

Rational construction of the electrode–solution interface where electrochemical processes occur is of paramount importance in electrochemistry. Efforts to gain better control and understanding of the interface have been hindered by lack of probing methods. Here, in this study, we show that the hydrogen evolution and oxidation reactions (HER/HOR) catalysed by platinum in base can be promoted by introduction of N-methylimidazoles at the platinum–water interface. In situ spectroscopic characterization together with simulations indicate that the N-methylimidazoles facilitate diffusion of hydroxides across the interface by holding the second layer of water close to platinum surfaces, thereby promoting the HER/HOR. We thus propose that the HER/HOR kinetics of platinum in acid and base is governed by diffusion of protons and hydroxides, respectively, through the hydrogen-bond network of interfacial water by the Grotthuss mechanism. Moreover, we demonstrate a 40% performance improvement of an anion exchange membrane electrolyser by adding 1,2-dimethylimidazole into the alkali fed into its platinum cathode.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electrically controllable chirality in a nanophotonic interface with a two-dimensional semiconductor

Chiral nanophotonic interfaces enable propagation direction-dependent interactions between guided optical modes and circularly dichroic materials. Electrical tuning of interface chirality would aid active, switchable non-reciprocity in on-chip optoelectronic and photonic circuitry, but remains an outstanding challenge. Here, in this paper, we report electrically controllable chirality in a nanophotonic interface with atomically thin monolayer tungsten diselenide (WSe 2 ). Titanium dioxide waveguides are directly fabricated on the surface of low-disorder, boron nitride-encapsulated WSe 2 . Following integration, photoluminescence from excitonic states into the waveguide can be electrically switched between balanced and directionally biased emission. The operational principle leverages the doping-dependent valley polarization of excitonic states in WSe 2 . Furthermore, the nanophotonic waveguide can function as a near-field source for diffusive exciton fluxes, which display valley and spin polarizations that are inherited from the interface chirality. Our versatile fabrication approach enables the deterministic integration of photonics with van der Waals heterostructures and could provide optical control over their excitonic and charge-carrier behaviour.

42 ENGINEERING↗
DOE OSTI2024

Manipulation of chiral interface states in a moiré quantum anomalous Hall insulator

Moiré systems made from stacked two-dimensional materials host correlated and topological states that can be electrically controlled with applied gate voltages. One prevalent form of topological state that can occur are Chern insulators that display a quantum anomalous Hall effect. Here we manipulate Chern domains in an interaction-driven quantum anomalous Hall insulator made from twisted monolayer–bilayer graphene and observe chiral interface states at the boundary between different domains. By tuning the carrier concentration, we stabilize neighbouring domains of opposite Chern number that then provide topological interfaces devoid of any structural boundaries. This allows the wavefunction of chiral interface states to be directly imaged using a scanning tunnelling microscope. In conclusion, our theoretical analysis confirms the chiral nature of observed interface states and allows us to determine the characteristic length scale of valley polarization reversal across neighbouring Chern domains.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Room-temperature spin injection across a chiral perovskite/III–V interface

Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of optoelectronic functionality. Current efforts are limited owing to inherent inefficiencies associated with spin injection across semiconductor interfaces. Here we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a standard semiconductor III-V (Al x Ga 1-x ) 0.5 In 0.5 P multiple quantum well light-emitting diode. The spin accumulation in the multiple quantum well is detected through emission of circularly polarized light with a degree of polarization of up to 15 ± 4%. The chiral perovskite/III-V interface was characterized with X-ray photoelectron spectroscopy, cross-sectional scanning Kelvin probe force microscopy and cross-sectional transmission electron microscopy imaging, showing a clean semiconductor/semiconductor interface at which the Fermi level can equilibrate. Finally, these findings demonstrate that chiral perovskite semiconductors can transform well-developed semiconductor platforms into ones that can also control spin.

14 SOLAR ENERGY↗
DOE OSTI2020

DFT modelling of explicit solid–solid interfaces in batteries: methods and challenges

Density Functional Theory (DFT) calculations of electrode material properties in high energy density storage devices like lithium batteries have been standard practice for decades. By contrast, DFT modelling of explicit interfaces in batteries arguably lacks universally adopted methodology and needs further conceptual development. In this paper, we focus on solid–solid interfaces, which are ubiquitous not just in all-solid state batteries; liquid-electrolyte-based batteries often rely on thin, solid passivating films on electrode surfaces to function. We use metal anode calculations to illustrate that explicit interface models are critical for elucidating contact potentials, electric fields at interfaces, and kinetic stability with respect to parasitic reactions. The examples emphasize three key challenges: (1) the “dirty” nature of most battery electrode surfaces; (2) voltage calibration and control; and (3) the fact that interfacial structures are governed by kinetics, not thermodynamics. To meet these challenges, developing new computational techniques and importing insights from other electrochemical disciplines will be beneficial.

25 ENERGY STORAGE↗
DOE OSTI2019

Recent progress in molecular engineering to tailor organic–inorganic interfaces in composite membranes

Organic-inorganic composite membranes are of great interest in modern water treatment processes because they offer potentially superior separation efficiency and advanced funtionality by integrating the properties of polymers and inorganics. The biggest challenge in the fabrication and applications of organic-inorganic composite membranes is the incompatibility of organic-inorganic interfaces. In this minireview, we summarize the most recent advances in molecular engineering to tailor the properties of interfaces in composite membranes. Three typical models (i.e. mixed matrix model, interface composite model, and dual-layer composite model) are presented to demonstrate how to regulate these interfaces via molecular engineering and how the interfacial properties ultimately affect the membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Recognition competes with hydration in anion-triggered monolayer formation of cyanostar supra-amphiphiles at aqueous interfaces

The triggered self-assembly of surfactants into organized layers at aqueous interfaces is important for creating adaptive nanosystems and understanding selective ion extraction. While these transformations require molecular recognition, the underlying driving forces are modified by the local environment in ways that are not well understood. Herein, we investigate the role of ion binding and ion hydration using cyanosurf, which is composed of the cyanostar macrocycle, and its binding to anions that are either size-matched or mis-matched and either weakly or highly hydrated. We utilize the supra-amphiphile concept where anion binding converts cyanosurf into a charged and amphiphilic complex triggering its self-organization into monolayers at the air–water interface. Initially, cyanosurf forms aggregates at the surface of a pure water solution. When the weakly hydrated and size-matched hexafluorophosphate (PF 6 - ) and perchlorate (ClO 4 - ) anions are added, the macrocycles form distinct monolayer architectures. Surface-pressure isotherms reveal significant reorganization of the surface-active molecules upon anion binding while infrared reflection absorption spectroscopy show the ion-bound complexes are well ordered at the interface. Vibrational sum frequency generation spectroscopy shows the water molecules in the interfacial region are highly ordered in response to the charged monolayer of cyanosurf complexes. Consistent with the importance of recognition, we find the smaller mis-matched chloride does not trigger the transformation. However, the size-matched phosphate (H 2 PO 4 - ) also does not trigger monolayer formation indicating hydration inhibits its interfacial binding. These studies reveal how anion-selective recognition and hydration both control the binding and thus the switching of a responsive molecular interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Engineering modular enzyme assembly: synthetic interface strategies for natural products biosynthesis applications

Covering: 2020 to 2025Natural products remain indispensable sources of therapeutic and bioactive compounds, yet traditional discovery strategies are constrained by compound rediscovery. Modular biosynthetic enzymes, such as type I polyketide synthases (PKSs) and type A non-ribosomal peptide synthetases (NRPSs), offer promising platforms for combinatorial biosynthesis owing to their programmable architectures. However, practical implementation is frequently limited by inter-modular incompatibility and domain-specific interactions. This review highlights recent advances in modular enzyme assembly enabled by synthetic interfaces-including cognate docking domains, synthetic coiled-coils, SpyTag/SpyCatcher, and split inteins-which function as orthogonal, standardized connectors to facilitate post-translational complex formation. These interfaces support rational investigations into substrate specificity, module compatibility, and pathway derivatization as well as general enzyme clustering applications beyond PKS and NRPS systems. Synthetic interfaces can be integrated with computational tools to support a more systematic and scalable framework for modular enzyme engineering by providing predictive insights into domain compatibility and interface design. These approaches within iterative design-build-test-learn workflows can accelerate the programmable assembly of biosynthetic systems and expand the accessible chemical space for natural products.

Kim, Gahyeon↗
DOE OSTI2020

An in situ shearing x-ray measurement system for exploring structures and dynamics at the solid–liquid interface

Revealing interfacial structure and dynamics has been one of the essential thematic topics in material science and condensed matter physics. Synchrotron-based x-ray scattering techniques can deliver unique and insightful probing of interfacial structures and dynamics, in particular, in reflection geometries with higher surface and interfacial sensitivity than transmission geometries. We demonstrate the design and implementation of an in situ shearing x-ray measurement system, equipped with both inline parallel-plate and cone-and-plate shearing setups and operated at the advanced photon source at Argonne National Laboratory, to investigate the structures and dynamics of end-tethered polymers at the solid-liquid interface. With a precise lifting motor, a micrometer-scale gap can be produced by aligning two surfaces of a rotating upper shaft and a lower sample substrate. A torsional shear flow forms in the gap and applies tangential shear forces on the sample surface. The technical combination with nanoscale rheology and the utilization of in situ x-ray scattering allow us to gain fundamental insights into the complex dynamics in soft interfaces under shearing. In this work, we demonstrate the technical scope and experimental capability of the in situ shearing x-ray system through the measurements of charged polymers at both flat and curved interfaces upon shearing. Furthermore, through the in situ shearing x-ray scattering experiments integrated with theoretical simulations, we aim to develop a detailed understanding of the short-range molecular structure and mesoscale ionic aggregate morphology, as well as ion transport and dynamics in soft interfaces, thereby providing fundamental insight into a long-standing challenge in ionic polymer brushes with a significant technological impact.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synchrotron studies of functional interfaces and the state of the art: A perspective

The dramatic improvements in synchrotron light sources across the world imply tremendous opportunities for interface science. In this work, we describe a variety of current scattering and spectroscopic techniques with an eye toward how these will evolve, particularly with the advent of diffraction-limited sources. We also note the importance of in situ and operando methods for both understanding interface creation and interface evolution in different environments. As interfaces are often where critical processes occur, whether in regard to energy/chemical/materials/quantum information science, understanding the utility of these x-ray techniques will be of considerable importance to the cultivation of next-generation scientists.

36 MATERIALS SCIENCE↗