Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “identity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Improved ultrasonic standard reference blocks

A program to improve the quality, reproducibility and reliability of nondestructive testing through the development of improved ASTM-type ultrasonic reference standards is described. Reference blocks of aluminum, steel, and titanium alloys were considered. Equipment representing the state-of-the-art in laboratory and field ultrasonic equipment was obtained and evaluated. Some RF and spectral data on ten sets of ultrasonic reference blocks were taken as part of a task to quantify the variability in response from nominally identical blocks. Techniques for residual stress, preferred orientation, and microstructural measurements were refined and are applied to a reference block rejected by the manufacturer during fabrication in order to evaluate the effect of metallurgical condition on block response.

Eitzen, D. G.↗

An analytical study of reduced-gravity propellant settling

Full-scale propellant reorientation flow dynamics for the Centaur D-1T fuel tank were analyzed. A computer code using the simplified marker and cell technique was modified to include the capability for a variable-grid mesh configuration. Use of smaller cells near the boundary, near baffles, and in corners provides improved flow resolution. Two drop tower model cases were simulated to verify program validity: one case without baffles, the other with baffles and geometry identical to Centaur D-1T. Flow phenomena using the new code successfully modeled drop tower data. Baffles are a positive factor in the settling flow. Two full-scale Centaur D-1T cases were simulated using parameters based on the Titan/Centaur proof flight. These flow simulations indicated the time to clear the vent area and an indication of time to orient and collect the propellant. The results further indicated the complexity of the reorientation flow and the long time period required for settling.

Bradshaw, R. D.↗

Chemical composition of boulder-2 rocks and soils, Apollo 17, Station 2

The bulk and trace element composition of five small samples from four rocks is remarkably similar. This result indicates that the metaclastic rocks studied are relatively uniform in their chemical composition. The elemental abundances found in the study are presented in two tables and the implications of the data are considered, giving attention to siderophiles, atmophile elements, and questions of element correlations. The 'dark mantle' valley soil 75081 at Camelot Crater is low in siderophiles. Since the soil is low in alkalis, a derivation from low-alkali mare basalt is suggested. The identical volatile contents in the surface soil 72461 and the 4 cm depth soil 72441 under a 0.7 m boulder argue against any surficial volatization by galactic and solar particles.

Laul, J. C.↗

Vibrational spectrum of CO2/-/ in an argon matrix

Ar:CO:N2O samples of mole ratio 250:1:1 and 500:1:1 were codeposited at 14 K with an atomic beam of sodium or potassium. The infrared spectrum of the resulting deposit was basically identical to that for CO and N2O isolated in an argon matrix in the absence of alkali metal atoms. Spectral absorption features were studied of Ar:CO2 samples of mole ratio ranging from 250 to 500 codeposited with an atomic beam of potassium. Ar:CO2 samples with a mole ratio in the range from 250 to 1000, which had been codeposited with an atomic beam of cesium, were also investigated.

Jacox, M. E.↗

Statistical mechanics of 'negative temperature' states

Consideration of the dynamics of a two-dimensional guiding center plasma, recently shown by Taylor and McNamara (1971) to be identical to the dynamics of the discrete vortex model of Onsager (1949). A semirigorous application of the methods of equilibrium statistical mechanics to the guiding center plasma (or equivalently, the line vortex system) is presented. An adaptation of the apparatus of the theory of probability is attempted, in the form given by Khinchin (1949) to obtain ensemble-average predictions for the states of the guiding center plasma. Interest focuses primarily on the regime in which the interaction energy is high enough to be above the Onsager 'negative temperature' threshold.

Montgomery, D.↗

Microcrater populations on Apollo 17 rocks

Approximately 6000 microcraters were investigated using binocular microscope techniques on Apollo 17 rocks 70215, 72215, 72235, 72395, 72435, 73216, 73218, 73275, 74275, 76135, 76136, and 79155. The crater populations observed have identical characteristics to those obtained from previous missions. Special emphasis was placed on assessing the influence of target properties on the observable crater populations. Although these properties cannot be quantitatively evaluated at present, the empirical results indicate that crater populations on glass, breccia, and crystalline rock surfaces may differ fundamentally. As a consequence, lunar surface exposure ages of individual rocks based on micrometeoroid craters may be subject to criticism.

Schneider, E.↗

Traction and film thickness measurements under starved elastohydrodynamic conditions

Results of traction and film thickness measurements made for a point contact geometry under starved elastohydrodynamic rolling and sliding conditions are reviewed. These results indicate that the variation of film thickness with the location of the inlet lubricant boundary under combination rolling and sliding behaves identically with that found previously under pure rolling conditions. The maximum shear rate is shown to depend on the degree of starvation and has no theoretical limit. The relative increase in traction due to starvation is influenced by thermal and fluid rheological conditions within the Hertz region.

Wedeven, L. D.↗

Dissipative heating effects and end corrections for viscous Newtonian flow in high shear capillary tube viscometry

The effect of dissipation heating on the apparent viscosity measured in capillary tube viscometry is described in this paper. Conditions of low Reynolds number and high shear are assumed. End corrections to the tube flow are incorporated. The flow curves show decreasing apparent viscosity when the shear stress increases. The configuration of the flow curves plotted in logarithmic presentation are found to be identical for fluids with Newtonian behavior. Convection is the predominant mechanism in removal of the heat in short capillary tube. The estimated upper bound for the shear stress obtainable in short length capillary tubes appears to be of the order of magnitude of 10 MPa limited primarily by the pressure drop associated with the constant end correction from the flat ended inlet and exit of the tube.

Jakobsen, J.↗

Glass production differences for equal-diameter impact craters

A thermodynamic model of meteorite impact is used to investigate the possibility that the creation of two impact craters of the same apparent diameter may have been accompanied by dissimilar shock heating regimes. For small craters, the idea may be concisely represented by the question of which event produces more glass, a large slow meteorite or a small fast one, if the resulting craters are of the same diameter. So that the results may be most apparent, the only parameters varied in this study are meteorite size and impact velocity. Identical basaltic material is assumed for meteorite and target. For impact velocities between 10 and 70 km/sec, an available model determines the radius of a spherical meteorite which would produce a crater diameter of 20 cm.

Rehfuss, D. E.↗

The science of the Viking missions

The Viking missions involve the launching of two identical spacecraft in the summer of 1975. Each spacecraft consists of a Lander and an Orbiter combination. The initial deceleration of the Lander during its descent to the Martian surface will be caused by aerodynamic drag. At about 5 km above the surface, a parachute is deployed. At 2 km three retrorockets are fired. The investigations to be conducted are discussed, giving attention to studies of the Martian surface with the aid of TV cameras, water mapping with an IR spectrometer, a thermal mapping experiment, studies of the Martian atmosphere, investigations conducted with a surface sampler, the search for life, and studies of the Martian surface composition.

Soffen, G. A.↗

Origin of fifteen cosmic dust particles intercepted by Pioneer 8 and 9

Consistent data for more than 8 years have been obtained from two identical cosmic dust particle experiments on board the space probes Pioneer 8 and 9. The two spacecraft are in direct heliocentric orbits with perihelia between 0.75 AU and 1.00 AU. On the basis of the data it is concluded that the majority of dust particles having elliptical orbits detected by the two space probes show orbital characteristics of Apollo group asteroids which originated from residual nuclei of short-period comets.

Rhee, J. W.↗

The crystal chemistry of armalcolites from Apollo 17

Single-crystal X-ray studies of armacolites from the 2 to 5 mm fraction of Apollo 17 soils 75082 and 78502 are evaluated. The two types of armacolites studied show slight composition differences and identical structures. Precession photographs of each crystal show the two forms, ortho and para, to have the same space group and nearly the same cell dimensions. The analyses conducted support the proposition that the difference in optical properties is caused by differing MgO and Cr2O3 contents.

Smyth, J. R.↗

Implementation of an advanced table look-up classifier for large area land-use classification

Software employing Eppler's improved table look-up approach to pattern recognition has been developed, and results from this software are presented. The look-up table for each class is a computer representation of a hyperellipsoid in four dimensional space. During implementation of the software Eppler's look-up procedure was modified to include multiple ranges in order to accommodate hollow regions in the ellipsoids. In a typical ERTS classification run less than 6000 36-bit computer words were required to store tables for 24 classes. Classification results from the improved table look-up are identical with those produced by the conventional method, i.e., by calculation of the maximum likelihood decision rule at the moment of classification. With the new look-up approach an entire ERTS MSS frame can be classified into 24 classes in 1.3 hours, compared to 22.5 hours required by the conventional method. The new software is coded completely in FORTRAN to facilitate transfer to other digital computers.

Jones, C.↗

Investigation of microwave hologram techniques for application to earth resources

An investigation of microwave hologram techniques for application to earth resources was conducted during the period from June 1971 to November 1972. The objective of this investigation has been to verify the feasibility of an orbital microwave holographic radar experiment. The primary advantage of microwave hologram radar (MHR) over the side-looking airborne radar (SLAR) is that of aspect or viewing angle; the MHR has a viewing angle identical with that of photography and IR systems. The combination of these systems can thus extend the multispectral analysis concept to span optical through microwave wavelengths. Another advantage is the capacity of the MHR system to generate range contours by operating in a two-frequency mode. It should be clear that along-track resolution of an MHR can be comparable with SLAR systems, but cross-track resolution will be approximately an order of magnitude coarser than the range resolution achievable with an arbitrary SLAR system. An advantage of the MHR over the SLAR is that less average transmitter power is required. This reduction in power results from the much larger receiving apertures associated with MHR systems.

Larson, R. W.↗

A corrugated horn antenna using V-shape corrugations

Corrugated horns use corrugations on the E-plane walls that are operating in the cutoff condition. In this paper, attention is focused on replacing the rectangular shaped corrugation with a V-shaped corrugation. The properties of the V corrugations are obtained using an integral equation solution; the results of the computational studies indicate that for operation of the V corrugations in the forbidden zone the depth of the corrugations lie between 0.3125 to 0.625 times the wavelength in contrast to the rectangular corrugations where the corresponding depth is 0.25 to 0.5 times the wavelength. The radiation patterns and impedance of two identical rectangular horns with corrugated E-plane walls using either V or rectangular corrugations are directly compared.

Mentzer, C. A.↗

Photochemical synthesis of simple organic free radicals on simulated planetary surfaces - An ESR study

Electron spin resonance (ESR) spectroscopy provided evidence for formation of hydroxyl radicals during ultraviolet photolysis (254 nm) at -170 C of H2O adsorbed on silica gel or of silica gel alone. The carboxyl radical was observed when CO or CO2 or a mixture of CO and CO2 adsorbed on silica gel at -170 C was irradiated. The ESR signals of these radicals slowly disappeared when the irradiated samples were warmed to room temperature. However, reirradiation of CO or CO2, or the mixture CO and CO2 on silica gel at room temperature then produced a new species, the carbon dioxide anion radical, which slowly decayed and was identical with that produced by direct photolysis of formic acid adsorbed on silica gel. The primary photochemical process may involve formation of hydrogen and hydroxyl radicals. Subsequent reactions of these radicals with adsorbed CO or CO2 or both yield carboxyl radicals, CO2H, the precursors of formic acid. These results confirm the formation of formic acid under simulated Martian conditions and provide a mechanistic basis for gauging the potential importance of gas-solid photochemistry for chemical evolution on other extraterrestrial bodies, on the primitive earth, and on dust grains in the interstellar medium.

Tseng, S.-S.↗

Statistical modeling of scintillation effects

Scintillation produces fluctuation of the complex envelope of a modulated signal. A useful way to characterize scintillation effects is to describe the signal statistics that result when a CW wave is transmitted through a random medium. Many theoretical treatments describe the signal statistics in a manner identical with the noise theory of Rice. These theories, however, predict Rice statistics only at a very great distance from the perturbing medium, and it has been suspected that generalization to permit the quadrature components of the scattered signal to be partially correlated Gaussian variates might better match the observed signal statistics. Recent tests of signals observed through three types of structured plasma have consistently confirmed this speculation and have revealed a surprising consistency in parameters describing the first-order signal statistics.

Fremouw, E. J.↗

Binary stellar winds

Stellar winds from a binary star will interact with each other along a contact discontinuity. We discuss qualitatively the geometry of the flow and field resulting from this interaction in the simplest case where the stars and winds are identical. We consider the shape of the critical surface (defined as the surface where the flow speed is equal to the sound speed) as a function of stellar separation and the role of shock waves in the flow field. The effect of stellar spin and magnetic sectors on the field configuration is given. The relative roles of mass loss and magnetic torque in the evolution of orbital parameters are discussed.

Siscoe, G. L.↗