Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

An Analysis of COVID-19’s Impact on U.S. Aviation

To better understand the effects of COVID-19 and prepare for crises in the future, the changes in the aviation industry during the pandemic were analyzed. Data was gathered on airlines’ economic status, passenger travel, air cargo, avionics manufacturing, and the environment. It was found that passenger air travel was severely depressed, dropping 96% in April 2020 compared to April 2019. Air cargo and manufacturing also felt the effects of the decrease in air traffic. In comparison to the previous year, air cargo capacity in July 2020 was down 28%, and manufacturing companies, such as Boeing, have seen more than a 10% decrease in revenue. Many companies have adapted to the pandemic with new protocols and procedures, such as social distancing guidelines and using passenger planes as cargo planes. Based on these actions taken guidelines were created for future crises. The objective is to facilitate a faster recovery and a more prepared airspace system. Lastly, health guidelines and areas of research that are relevant after a global pandemic are outlined.

Trishala Madhu Jain↗
NASA NTRS2020

Impact of COVID-19 on Aviation in America

To better understand the effects of COVID-19 and prepare for crises in the future, the changes in the aviation industry during the pandemic were analyzed. Data was gathered on airlines’ economic status, passenger travel, air cargo, avionics manufacturing, and the environment. It was found that passenger air travel was severely depressed, dropping 96% in April 2020 compared to April 2019 [1]. Air cargo and manufacturing also felt the effects of the decrease in air traffic. In comparison to the previous year, air cargo capacity in July 2020 was down 28% [2], and manufacturing companies, such as Boeing, have seen more than a 10% decrease in revenue [3]. Many companies have adapted to the pandemic with new protocols and procedures, such as social distancing guidelines and using passenger planes as cargo planes. Based on these actions taken guidelines were created for future crises. The objective is to facilitate a faster recovery and a more prepared airspace system. Lastly, health guidelines and areas of research that are relevant after a global pandemic are outlined.

Trishala Jain↗
NASA NTRS2021

Advanced Multimodal Solutions for Information Presentation

High-workload, fast-paced, and degraded sensory environments are the likeliest candidates to benefit from multimodal information presentation. For example, during extra-vehicular activity (EVA) and telerobotic operations, the sensory restrictions associated with such a hostile environment provide a major challenge to maintaining the situation awareness (SA) required for safe operations. In particular, orientation, navigation, and collision avoidance are critical aspects of EVA tasks that need to be addressed to ensure the safety of the crew and the success of the mission. Multimodal displays hold promise to enhance situation awareness and task performance by utilizing different sensory modalities and maximizing their effectiveness based on appropriate interaction between modalities. Multimodal displays will also play an important role for long-duration information systems and will likely begin to be developed in the early phases of cislunar Gateway, and later lunar or Mars transit missions. Information systems are envisioned for LDEMs that require spacecraft with greater crew autonomy and increased dependence on computer-provided information needed to perform routine tasks, as well as time- and safety critical tasks. Such a system will require a single, common interface that is easy to learn and use and accesses key information from all relevant vehicle/habitat systems to enable task performance in both nominal and emergency conditions. Understanding of multimodal display technologies and their interactions will help to inform interface guidelines for LDEMs. The scope of the current report is an analysis of potential multimodal display technologies for long duration missions and, in particular, will focus on their potential role in EVA activities. The review will address multimodal (combined visual, auditory and/or tactile) displays investigated by the National Aeronautics and Space Administration (NASA), industry, and Department of Defense (DoD). It also considers the need for adaptive information systems to accommodate a variety of operational contexts such as crew status (e.g., fatigue, workload level) and task environment (e.g., EVA, habitat, rover, spacecraft). Current approaches to guidelines and best practices for combining modalities for the most effective information displays are also reviewed. Potential issues in developing interface guidelines for LDEMs are briefly considered.

multimodal displays↗
NASA NTRS2022

Quantifying Cybersecurity Risk for NASA Missions

An end-to-end cyber risk assessment process is presented that is based on the combination of guidelines from the National Institute of Standards & Technology (NIST), the standard 5x5 risk matrix, and quantitative methods for generating loss exceedance curves. The NIST guidelines provide a framework for cyber risk assessment, and the standard 5x5 matrix is widely used across the industry for the representation of risk across multiple disciplines. Loss exceedance curves are a means of quantitatively assessing the loss that occurs due to a given risk profile. Combining these different techniques enables us to follow the guidelines, adhere to standard 5x5 risk management practices and develop quantitative metrics simultaneously. Our quantification process is based on the consideration of the NASA and JPL Cost Risk assessment modeling techniques as we define the cost associated with the cybersecurity risk profile of a mission as a function of the mission cost.

Miller, Robert L.↗
NASA NTRSDate not supplied

NASA Advanced Reconfigurable Electrified Aircraft Laboratory (AREAL)

The rapid maturation of electrified aircraft and the underlying technologies has outpaced the development of corresponding standards and guidelines. This is especially true with respect to the design and test of high voltage power systems and equipment. To expedite the development of these standards and guidelines, the National Aeronautics and Space Administration (NASA) Revolutionary Vertical Lift Technology (RVLT) Project has designed and built the Advanced Reconfigurable Electrified Aircraft Laboratory (AREAL). AREAL is a 200 kW High Voltage DC (HVDC) test facility that can be reconfigured to test various electrical power system (EPS) architectures and/or different types of Utilization Equipment (UE). This paper will cover AREAL and its capabilities, the testing planned within AREAL, and how the tests performed within AREAL will inform developing HVDC Power System standards, test methods and guidelines, and models.

Aerospace↗
NASA NTRSDate not supplied

Interface Consistency: Phase I Results & Phase II Status

Future exploration missions will rely on designing and developing vehicles and complex systems from within NASA and through multiple external commercial partners to meet mission goals. Despite existing consistency-related agency requirements, NASA’s approach to commercial spaceflight development encourages providers’ flexibility and innovation. This strategy is resulting in significant design diversity across Artemis vehicles. Design best practices and guidelines champion interface consistency to promote mental model development and knowledge transfer. However, research investigating the benefits of consistency is mixed, and little is known about its role in complex systems. Determining the level of risk that system diversity presents is difficult, as there is no established method for quantifying the degree of consistency within and across interfaces, nor is there information about the differential impacts of different types of inconsistency. Phase I of this project (Characterization and Measurement) served as a starting point to better understand the construct of consistency, its application, and the range of studies and methods for measuring it. The project team created a taxonomy of consistency to apply to interfaces as a framework to guide the development of tools to assess intersystem consistency. Checklist and cognitive walkthrough methods were developed for use by human factors (HF) and human-computer interaction (HCI) experts. The Intersystem Consistency Scale (ICS) was developed for interface evaluations with crew. A pilot study evaluated the methods’ ability to distinguish differences between Artemis-like prototype pairs exhibiting either high or low design consistency. In addition, click errors and time on task were collected within the ICS (crew-like) group. Results from our exploratory analysis and lessons learned from the pilot study will be discussed. The project team will also present the status of Phase II (Risk Assessment, Standards and Guidelines). This includes incorporating feedback to redesign the assessment tools, and inputs from displays and training Subject Matter Experts to update tasks and prototype designs. The team will present the risk assessment study design to identify the types and levels of inconsistency that pose the greatest risk to performance. Plans to apply these results toward agency standards and guideline recommendations will also be discussed.

Human-Computer Interaction↗
DOE OSTI2020

Advanced control sequences and FDD technology. Just shiny objects, or ready for scale?

Innovations in commercial building control sequences (ASHRAE guideline 36) and fault detection and diagnostics (FDD) technology have the potential to transform existing building operational efficiency by realizing whole-building level savings on the order of 15% and higher. However, several technical and market barriers related to up-front estimation of achievable savings, verifying implementation, and ensuring persistence are slowing down their adoption as a core offering through diverse owner-funded initiatives and rate-payer funded programs. This paper describes a suite of solutions to overcome these barriers to program delivery of advanced HVAC controls integrated with FDD energy management and information system (EMIS) technology. First, the Guideline 36 conformance test offers an automated method to confirm correct sequence implementation by the manufacturer, before field deployment. A successful test of a controller was conducted using a new manufacturer-independent hardware-in-the-loop testbed demonstrating the viability and scalability of this approach. Second, the Guideline 36 energy savings calculator uses modeling paired with high-level user inputs to estimate building-specific savings potential, target cost effective implementation and minimize uncertainty. Initial results indicate the baseline control sequences significantly impact energy savings, however, as much as 50% savings may be possible for the worst-case baseline scenario. Third, a functional specification provides minimum recommended EMIS-FDD capabilities, and best practices to integrate the technology into organizational practice and ensure that advanced control sequences provide persistent savings.

Pritoni, Marco↗
DOE OSTI2020

Sampling and Analysis Plan for Investigation of Undeclared Nuclear Activities - 20104

The nuclear-centered energy policy in South Korea is moving towards a nuclear-free era. It also facilitates an action or progress on the denuclearization of the Korean peninsula. The Nuclear Safety and Security Commission (NSSC) launched a new R and D project which attempts to verify nuclear activities via analyzing environmental samples. Environmental samples possibly contain significant radiological information relevant to past undeclared activities. In order to precisely verify them, it is essential to provide 1) the concrete information of target facilities, 2) appropriate methodologies and procedures, and 3) well-suited instrumentation and equipment corresponding to sample signatures. It is also important to provide scientific reliability or validity in any process such as sample collection, handling, transportation and laboratory analysis. Therefore, the information of nuclear facilities (fuel fabrication plant, graphite moderated reactor, reprocessing plant) in North Korea are reviewed in order to determine parameters for appropriate sampling methods representing a facility's characteristics. Secondly, a sampling procedure for radioactive elements is being developed based on international and domestic standards such as ASTM (American Society for Testing and Materials), KS (Korean industrial Standards), and International Atomic Energy Agency (IAEA) manuals. The procedure contains some specific information including sampling process, sampling tools, amount of sample, sample identification, and other related information. Developing the qualified national guidelines is most important since sampling and analyzing results can be used as evidences of nuclear activities. The guideline developed through this work will clearly define various methodologies such as document verification, sampling procedures, collection methods, sample storage criteria, chain of custody, and transportation conditions. The final objective of this work is to establish the infrastructure and regulatory framework for assessment of nuclear activities, and provide a national guideline for sampling and analysis. This will bring confidence in the results and play a critical role in complete denuclearization progress in South Korea. (authors)

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Pathways of China's PM 2.5 air quality 2015–2060 in the context of carbon neutrality

Clean air policies in China have substantially reduced particulate matter (PM 2.5 ) air pollution in recent years, primarily by curbing end-of-pipe emissions. However, reaching the level of the World Health Organization (WHO) guidelines may instead depend upon the air quality co-benefits of ambitious climate action. Here, we assess pathways of Chinese PM 2.5 air quality from 2015 to 2060 under a combination of scenarios that link global and Chinese climate mitigation pathways (i.e. global 2°C- and 1.5°C-pathways, National Determined Contributions (NDC) pledges and carbon neutrality goals) to local clean air policies. We find that China can achieve both its near-term climate goals (peak emissions) and PM 2.5 air quality annual standard (35 μg/m3) by 2030 by fulfilling its NDC pledges and continuing air pollution control policies. However, the benefits of end-of-pipe control reductions are mostly exhausted by 2030, and reducing PM 2.5 exposure of the majority of the Chinese population to below 10 μg/m 3 by 2060 will likely require more ambitious climate mitigation efforts such as China's carbon neutrality goals and global 1.5°C-pathways. Our results thus highlight that China's carbon neutrality goals will play a critical role in reducing air pollution exposure to the level of the WHO guidelines and protecting public health.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Microbiome data management in action workshop: Atlanta, GA, USA, June 12–13, 2024

Microbiome research is revolutionizing human and environmental health, but the value and reuse of microbiome data are significantly hampered by the limited development and adoption of data standards. While several ongoing efforts are aimed at improving microbiome data management, significant gaps still remain in terms of defining and promoting adoption of consensus standards for these datasets. The Strengthening the Organization and Reporting of Microbiome Studies (STORMS) guidelines for human microbiome research have been endorsed and successfully utilized by many research organizations, publishers, and funding agencies, and have been recognized as a consensus community standard. No equivalent effort has occurred for environmental, synthetic, and non-human host-associated microbiomes. To address this growing need within the microbiome research community, we convened the Microbiome Data Management in Action Workshop (June 12–13, 2024, in Atlanta, GA, USA), to bring together key decision makers in microbiome science including researchers, publishers, funders, and data repositories. The 50 attendees, representing the diverse and interdisciplinary nature of microbiome research, discussed recent progress and challenges, and brainstormed actionable recommendations and paths forward for coordinated environmental microbiome data management and the modifications necessary for the STORMS guidelines to be applied to environmental, non-human host, and synthetic microbiomes. The outcomes of this workshop will form the basis of a formalized data management roadmap to be implemented across the field. These best practices will drive scientific innovation now and in years to come as these data continue to be used not only in targeted reanalyses but in large-scale models and machine learning efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

ESS-DIVE Reporting Format for Comma-separated Values (CSV) File Structure

The ESS-DIVE reporting format for Comma-separated Values (CSV) file structure is based on a combination of existing guidelines and recommendations including some found within the Earth Science Community with valuable input from the Environmental Systems Science (ESS) Community. The CSV reporting format is designed to promote interoperability and machine-readability of CSV data files while also facilitating the collection of some file-level metadata content. Tabular data in the form of rows and columns should be archived in its simplest form, and we recommend submitting these tabular data following the ESS-DIVE reporting format for generic comma-separated values (CSV) text format files. In general, the CSV file format is more likely accessible by future systems when compared to a proprietary format and CSV files are preferred because this format is easier to exchange between different programs increasing the interoperability of a data file. By defining the reporting format and providing guidelines for how to structure CSV files and some field content within, this can increase the machine-readability of the data file for extracting, compiling, and comparing the data across files and systems.Data package files are in .csv, .png, and .md. Open the .csv with e.g. Microsoft Excel, LibreOffice, or Google Sheets. Open the .md files by downloading and using a text editor (e.g., notepad or TextEdit). Open the .png in e.g. a web browser, photo viewer/editor, or Google Drive.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Terrestrial laser scanning data (Levels 0 and 1) for Pasoh, Malaysia, Sep 2024

This data package contains data from terrestrial laser scanning (TLS) at the Pasoh Forest Reserve, Malaysia. The Pasoh Forest Reserve is a facility of the Forest Research Institute Malaysia, and contains evergreen lowland dipterocarp forest. The Next-Generation Ecosystem Experiments Tropics (NGEE-Tropics) study areas at Pasoh were established to study how different species respond to climatic variation and soil water availability. Two study areas were chosen representing different topography and species. The TLS data archived here were collected to provide detailed, three-dimensional information about forest structure. Specifically, data were collected to allow tree-level characterization of woody structure and leaf area for 12 focal trees with FloraPulse and sap flux sensors, facilitating estimation of woody biomass and leaf area to allow upscaling of water content and transpiration data to the tree-level. Scan positions were not selected to provide consistent data for non-focal trees with the study areas. This data package contains the following data: - High-level files document further details of the campaign and data package: 1_CampaignSummary.csv provides details about the campaign and study site, 2_ScanAreasDetail.csv provides details about each separate scan area (groups of scans post-processed into a single point cloud), 3_TerrestrialLidarSensor.csv provides further technical details about the Riegl VZ-400i TLS sensor, TLS_CSV_dd.csv is a CSV Data Dictionary providing information about the fields in CSV files following the ESS-DIVE CSV File Formatting Guidelines Reporting Format, TLS_flmd.csv is a File Level Metadata file providing information about each file in the data package following the ESS-DIVE File Level Metadata Reporting Format, and README.txt is a text file describing the overall project and file structure. - Level 0 data are the raw data (.PROJ folders) as recorded by the Riegl VZ-400i TLS instrument before scan co-registration and post-processing with the Riegl's proprietary RiSCAN PRO software, which requires a license. - Level 1 data contain post-processed, co-registered data from each scan area. The "PointClouds" folder for each scan area contains a .las file with 1 cm resolution point cloud data exported from RiSCAN PRO. These are the main files likely to be of interest to most users and can be further processed with any software capable of manipulating .las files (e.g. Python, R CloudCompare). The "Project Information" folder contains log files from post-processing in RiSCAN PRO that may be of interest to users who want to see detailed records of post-processing, including all PDF reports generated by RiSCAN PRO. The "ScanPositions" folder contains information about the final position of all TLS scans, after post-processing, in multiple formats. The file ScanPositions_*.csv provides final geo-referenced scan positions, and the file SOP_backup_*.csv can be used in RiSCAN PRO to restore the co-registered scan positions if users wish to re-process raw data (Level 0 .PROJ folders) with RiSCAN PRO software (e.g., subsample to a different resolution, exclude a certain scan position, or apply different filters on reflectance or deviation values) without redoing time-consuming co-registration steps.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Terrestrial laser scanning data (Levels 0 and 1) from Urban Biogeochemistry Pilot Project sites, Knoxville, Tennessee, Jul 2024 - Jul 2025

This data package contains data from terrestrial laser scanning (TLS) at five urban park sites in Knoxville, Tennessee, USA. All parks include open-grown and/or closed-canopy trees and mixed nearby land use. These study sites were established as part of the Urban Biogeochemistry Pilot Project, which has an overall goal of better understanding how hydrobiogeochemical cycling is altered within the human environment. These five sites represent a gradient of urbanization, and were instrumented to understand hydrological and biogeochemical cycling (e.g., soil moisture, soil physical properties and biogeochemistry, tree transpiration, species type). The TLS data archived here were collected to provide detailed, three-dimensional information about forest structure. Specifically, data were collected to allow tree- and stand-level characterization of woody structure and leaf area. TLS scans were placed to capture the area around trees with sap flow sensors, and as much of a 50 m radius area around the meteorological station as possible given site property limits. Derived products will allow upscaling of water content and transpiration data. This data package contains the following data: - High-level files document further details of the campaign and data package: 1_CampaignSummary.csv provides details about the campaign and study site, 2_ScanAreasDetail.csv provides details about each separate scan area (groups of scans post-processed into a single point cloud), 3_TerrestrialLidarSensor.csv provides further technical details about the Riegl VZ-400i TLS sensor, TLS_CSV_dd.csv is a CSV Data Dictionary providing information about the fields in CSV files following the ESS-DIVE CSV File Formatting Guidelines Reporting Format, TLS_flmd.csv is a File Level Metadata file providing information about each file in the data package following the ESS-DIVE File Level Metadata Reporting Format, and README.txt is a text file describing the overall project and file structure. - Level 0 data are the raw data (.PROJ folders) as recorded by the Riegl VZ-400i TLS instrument before scan co-registration and post-processing with the Riegl's proprietary RiSCAN PRO software, which requires a license. - Level 1 data contain post-processed, co-registered data from each scan area. The "PointClouds" folder for each scan area contains a .las file with 1 cm resolution point cloud data exported from RiSCAN PRO. These are the main files likely to be of interest to most users and can be further processed with any software capable of manipulating .las files (e.g. Python, R CloudCompare). The "Project Information" folder contains log files from post-processing in RiSCAN PRO that may be of interest to users who want to see detailed records of post-processing, including all PDF reports generated by RiSCAN PRO. The "ScanPositions" folder contains information about the final position of all TLS scans, after post-processing, in multiple formats. The file ScanPositions_*.csv provides final geo-referenced scan positions, and the file SOP_backup_*.csv can be used in RiSCAN PRO to restore the co-registered scan positions if users wish to re-process raw data (Level 0 .PROJ folders) with RiSCAN PRO software (e.g., subsample to a different resolution, exclude a certain scan position, or apply different filters on reflectance or deviation values) without redoing time-consuming co-registration steps.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Design for Remanufacturing

The objective of this project was to develop relationships between published scholarship, industry experience, and remanufacturing design rules and identify a clear path for integrating remanufacturing design rules into CAD tools and design practices. To accomplish this, remanufacturing knowledge was compiled, and then the relationships between this knowledge and a prioritized set of product design guidelines was developed. Next, a process to create rules out of guidelines was developed by first defining life extension as a primary function, and remanufacturing as effective tasks to control the failure modes that would restrict the product life. The reliability centered maintenance (RCM) process was used to identify proactive tasks and default actions to mitigate the effects of failure modes. These tasks were developed into expert system rules. The impact of design on remanufacturing was then validated through implementing a prioritized set of design rules for a Heavy Duty Off-Road (HDOR) techno-economic case study. Finally, detailed steps on how to define, develop, and integrate these rules into CAD were created.

42 ENGINEERING↗
DOE OSTI2024

Regulations for Bat Protection in Mexico's Wind Farms

Wind energy development has expanded the fastest globally among all renewable sources during the last 20 years. However, wind farms have documented adverse impacts on bats, including mortality from collisions with turbine blades and disruptions to habitat and behavior. As the world's sixth most attractive economy for renewables, with 70 operating wind farms, Mexico and its bats now face escalating threats from the country's burgeoning wind industry. Despite this rapid growth, few studies have analyzed Mexico's regulatory framework to prevent, evaluate, and mitigate wind farm effects on bats. In this study, we reviewed Mexican laws and treaties that facilitate wind farm permitting, construction, operation, and decommissioning, and searched for guidelines that specifically address bat conservation. We found eight international pacts that promote wind power adoption along with three relevant articles in Mexico's Constitution. The General Law of Ecological Balance and Environmental Protection proved most pertinent for impact management. Supplementary guidelines from the Ministry of Environment and Natural Resources offer general strategies for evaluating wind farm impacts on bats, but adherence remains voluntary. Given expanding wind power investments across Mexico, we highlight the need for more stringent national standards that require preventative and corrective measures to protect bat populations. Tighter legislation and enforcement offer pathways toward environmentally sustainable wind energy development in Mexico.

17 WIND ENERGY↗
NASA NTRS1996

Monitoring occupational exposure to cancer chemotherapy drugs

Reports of the health effects of handling cytotoxic drugs and compliance with guidelines for handling these agents are briefly reviewed, and studies using analytical and biological methods of detecting exposure are evaluated. There is little conclusive evidence of detrimental health effects from occupational exposure to cytotoxic drugs. Work practices have improved since the issuance of guidelines for handling these drugs, but compliance with the recommended practices is still inadequate. Of 64 reports published since 1979 on studies of workers' exposure to these drugs, 53 involved studies of changes in cellular or molecular endpoints (biological markers) and 12 described chemical analyses of drugs or their metabolites in urine (2 involved both, and 2 reported the same study). The primary biological markers used were urine mutagenicity, sister chromatid exchange, and chromosomal aberrations; other studies involved formation of micronuclei and measurements of urinary thioethers. The studies had small sample sizes, and the methods were qualitative, nonspecific, subject to many confounders, and possibly not sensitive enough to detect most occupational exposures. Since none of the currently available biological and analytical methods is sufficiently reliable or reproducible for routine monitoring of exposure in the workplace, further studies using these methods are not recommended; efforts should focus instead on wide-spread implementation of improved practices for handling cytotoxic drugs.

Review, Academic↗
DOE OSTI2020

Solar Cell Efficiency Tables (Version 56)

Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since January 2020 are reviewed.

energy conversion efficiency↗
DOE OSTI2020

Solar cell efficiency tables (version 57)

Abstract Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since June 2020 are reviewed. In this issue, charts showing efficiency improvements since 1993 are included as well as cell and module area definitions and an updated list of recognized test centres.

Green, Martin↗