Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometric modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Influence of Ply Waviness on Fatigue Life of Tapered Composite Flexbeam Laminates

Nonlinear tapered flexbeam laminates, with significant ply waviness, were cut from a full-size composite rotor hub flexbeam. The specimens were tested under combined axial tension and cyclic bending loads. All of the specimens had wavy plies through the center and near the surfaces (termed marcelled areas), although for some of the specimens the surface marcels were very obvious, and for others they were much smaller. The specimens failed by first developing cracks through the marcels at the surfaces, and then delaminations grew from those cracks, in both directions. Delamination failure occurred in these specimens at significantly shorter fatigue lives than similar specimens without waviness, tested in ref. 2. A 2D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. In addition, the FE model duplicated the waviness observed in one of the test specimens. The model was analyzed using a geometrically nonlinear FE code. Modifications were made to the original model to reduce the amplitude of the marcels near the surfaces. The analysis was repeated for each modification. Comparisons of the interlaminar normal stresses, sigma(sub n), in the various models showed that under combined axial-tension and cyclic-bending loading, for marcels of the same aspect ratio, sigma(sub n) stresses increased as the distance along the taper, from thick to thin end, increased. For marcels of the same aspect ratio and at the same X-location along the taper, sigma(sub n) stresses decreased as the distance from the surface into the flexbeam interior increased. A technique was presented for determining the smallest acceptable marcel aspect ratio at various locations in the flexbeam.

Murri, Gretchen B.↗
NASA NTRS1988

Precise orbit determination for NASA's earth observing system using GPS (Global Positioning System)

An application of a precision orbit determination technique for NASA's Earth Observing System (EOS) using the Global Positioning System (GPS) is described. This technique allows the geometric information from measurements of GPS carrier phase and P-code pseudo-range to be exploited while minimizing requirements for precision dynamical modeling. The method combines geometric and dynamic information to determine the spacecraft trajectory; the weight on the dynamic information is controlled by adjusting fictitious spacecraft accelerations in three dimensions which are treated as first order exponentially time correlated stochastic processes. By varying the time correlation and uncertainty of the stochastic accelerations, the technique can range from purely geometric to purely dynamic. Performance estimates for this technique as applied to the orbit geometry planned for the EOS platforms indicate that decimeter accuracies for EOS orbit position may be obtainable. The sensitivity of the predicted orbit uncertainties to model errors for station locations, nongravitational platform accelerations, and Earth gravity is also presented.

Williams, B. G.↗
DOE OSTI2026

Dispersion Loss Counteracts Embedding Condensation and Improves Generalization in Small Language Models

Large language models (LLMs) achieve remarkable performance through ever-increasing parameter counts, but scaling incurs steep computational costs. To better understand LLM scaling, we study representational differences between LLMs and their smaller counterparts, with the goal of replicating the representational qualities of larger models in smaller models. We observe a geometric phenomenon which we term embedding condensation, where token embeddings collapse into a narrow cone-like subspace in some language models. Through systematic analyses across multiple Transformer families, we show that small models such as GPT2 and Qwen3-0.6B exhibit severe condensation, whereas larger models such as GPT2-x1 and Qwen3-32B are more resistant to this phenomenon. Additional observations show that embedding condensation is not reliably mitigated by knowledge distillation from larger models. To fight against it, we formulate a dispersion loss that explicitly encourages embedding dispersion during training. Experiments demonstrate that it mitigates condensation, recovers dispersion patterns seen in larger models, and yields performance gains across 10 benchmarks. We believe this work offers a principled path toward improving smaller Transformers without additional parameters.

Xiao, Xi [ORNL] (ORCID:0009000009316982)↗
NASA NTRS1973

Wind tunnel tests of an F-8 airplane model equipped with an oblique wing

An experimental investigation was conducted in an 11- by 11-foot transonic wind tunnel to study the lift, drag and stability characteristics of a 0.087-scale model of an operational airplane fitted with an oblique wing. The model wing was of elliptical planform with an unswept aspect ratio of 12.7 and a thickness of 10 percent. All other external geometric features of the model were scaled to the basic full size operational airplane with the engine inlet faired closed. Longitudinal and lateral-directional stability data were obtained with the wing at sweep angles of 0 deg, 45 deg and 60 deg Test Mach numbers ranged from 0.6 to 1.4 deg Angles of attack were between minus 4 deg and 8 deg at zero sideslip. Angles of sideslip were between plus and minus 4 degrees for two angles of attack depending upon the wing configuration. Tests were conducted at a Reynolds number of 6 million per foot except for a few runs when balance capacity limited the Reynolds number to 4 million per foot.

Graham, L. A.↗
NASA NTRS2018

Flux-Pinned Dynamics Model Parameterization and Sensitivity Study

Flux-pinned interfaces for spacecraft are an action-at-a-distance technology that can maintain a passively stable equilibrium between two spacecraft in close-proximity using the physics of magnetic flux pinning. Although flux pinning dynamics have been studied from a material-science perspective and at an interface level, there is a need to better understand the sensitivities and implications of system-level designs on the flux-pinned interface dynamics, especially in designs with multiple magnets and superconductors. These interfaces have highly nonlinear, coupled dynamics that are influenced by physical parameters including but not limited to strength of magnetic field sources, field-cooled position, and superconductor geometry. This paper addresses that gap by codifying parametric terms into an improved dynamics model, which can then be used to simulate the interaction of a multiple-superconductor-multiple-magnet interface. A standard starting point for modeling flux pinning dynamics is Kordyuk’s frozen image model, which defines a geometric mapping between magnetic field sources and their corresponding magnetic point source “images inside the volume of the superconductor.” The frozen image model successfully approximates the characteristics of flux pinning dynamics, but could provide more precise position and orientation predictions with the addition of various physical parameter refinements. The sensitivity of the general flux-pinned dynamics model is studied by varying the physical parameters and simulating the systems level dynamics. A predictive dynamics model is crucial to the maturation of this technology so it can be utilized in spacecraft systems, and this work represents a critical step in the development of that model.

Peck, Mason↗
NASA NTRS2013

Modeling Circumstellar Disks of B-Type Stars with Observations from the Palomar Testbed Interferometer

Geometrical (uniform disk) and numerical models were calculated for a set of B-emission (Be) stars observed with the Palomar Testbed Interferometer (PTI). Physical extents have been estimated for the disks of a total of15 stars via uniform disk models. Our numerical non-LTE models used parameters for the B0, B2, B5, and B8spectral classes and following the framework laid by previous studies, we have compared them to infrared K-band interferometric observations taken at PTI. This is the first time such an extensive set of Be stars observed with long-baseline interferometry has been analyzed with self-consistent non-LTE numerical disk models.

Grzenia, B. J.↗
DOE OSTI2023

Temporally continuous thermofluidic–thermomechanical modeling framework for metal additive manufacturing

Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic–thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. Here, the presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

42 ENGINEERING↗
DOE OSTI2021

Microscale Mechanical‐Chemical Modeling of Granular Salt: Insights for Creep

Abstract Microscale numerical modeling is potentially an effective approach for understanding salt creep, but it is quite challenging because natural salt grain boundaries can have complex and evolving geometry, and because contacts between these deformable salt mineral grains are dynamic as a result of compaction, chemical reaction, fluid flow, and heat transfer. In this study, we have overcome these challenges and developed a new microscale mechanical‐chemical (MC) model to analyze creep of salt at the microscale, accounting for coupled deformation, dynamic contacts, and chemical reaction in granular systems with realistic geometric representations. The MC model was realized by linking a new microscale mechanical code based on the numerical manifold method (NMM) to a reactive transport code named Crunch. We simulated the processes of reorganization of the salt grains, microfracturing, and pressure solution that contribute to creep at larger scales. Based on this first quantitative microscale model, we found that sharp corners of mineral grains can dominate the contact dynamics, microfracturing, and pressure solution when salt is compacted, thus governing the structural changes and porosity loss of the system. We found that pressure solution, which preferentially dissolves sharp corners and edges, can lead to relatively high porosity loss in the system, thus playing an important role in the creep of salt. Our analysis shows that the dynamic changes of salt granular systems involving grain relocation and pressure solution can occur repeatedly and continuously, thus contributing to longer‐term creep of salt at larger scales.

58 GEOSCIENCES↗
NASA NTRS1986

The ortho-para H2 distribution on Uranus: Constraints from the collision-induced 3-0 dipole band and 4-0 S(0) and S(1) quadrupole line profiles

Recent high quality spectral observations have allowed the derivation of constraints on the atmospheric structure of Uranus. The present analysis, which is based on the detailed modeling of a broadband geometric albedo spectrum and high resolution observations of the H2 4-0 quadrupole and 6818.9-A CH4 features, yields (1) a family of models which parameterize an upper tropospheric haze layer, (2) a lower, optically infinite cloud at a given pressure level, (3) the cloud-level methane molar fraction, and (4) the mean ortho/para ratio in the visible atmosphere. The single scattering albedo of atmospheric aerosols exhibits a steep darkening between 5890 and 6040 A.

Baines, K. H.↗
NASA NTRS1992

Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener

This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener.

Wang, J. T.↗
DOE OSTI2025

A Machine Learning Framework for Predicting Microphysical Properties of Ice Crystals From Cloud Particle Imagery

The microphysical properties of ice crystals are important because they significantly alter the radiative properties and spatiotemporal distributions of clouds, which in turn strongly affect Earth's climate. However, it is challenging to measure key properties of ice crystals, such as mass or morphological features. Here, we present a proof-of-concept framework for predicting three-dimensional (3D) microphysical properties of ice crystals from in situ two-dimensional (2D) imagery. First, we computationally generated synthetic ice crystals using 3D modeling software along with geometric parameters estimated from the 2021 Ice Cryo-Encapsulation Balloon (ICEBall) field campaign. Then, we used synthetic crystals to train machine learning (ML) models to predict effective density ($ρ_e$), effective surface area ($A_e$), and number of bullets ($N_b$) from synthetic rosette imagery. On unseen synthetic images, our ML models accurately predicted ice crystal properties. ResNet-18 performed best, achieving $R^2$ values of 0.99 and 0.98 for $ρ_e$ and $A_e$, respectively, and MAE of 0.10 for mathematical equation in single view tasks. Stereo view ResNet-18 further reduced RMSE by 40% for $ρ_e$ and $A_e$ and reduced MAE by 0.08 for $N_b$. This work provides a novel ML-driven framework for estimating ice microphysical properties from in situ imagery, which will allow for downstream constraints on microphysical parameterizations, such as the mass-size relationship.

Ko, J. [Columbia Univ., New York, NY (United State↗
DOE OSTI2024

A Bayesian Multi-fidelity Neural Network to Predict Nonlinear Frequency Backbone Curves

The use of structural mechanics models during the design process often leads to the development of models of varying fidelity. Often low-fidelity models are efficient to simulate but lack accuracy, while the high-fidelity counterparts are accurate with less efficiency. Here, this paper presents a multi-fidelity surrogate modeling approach that combines the accuracy of a high-fidelity finite element model with the efficiency of a low-fidelity model to train an even faster surrogate model that parameterizes the design space of interest. The objective of these models is to predict the nonlinear frequency backbone curves of the Tribomechadynamics Research Challenge benchmark structure which exhibits simultaneous nonlinearities from frictional contact and geometric nonlinearity. The surrogate model consists of an ensemble of neural networks that learn the mapping between low and high-fidelity data through nonlinear transformations. Bayesian neural networks are used to assess the surrogate model's uncertainty. Once trained, the multi-fidelity neural network is used to perform sensitivity analysis to assess the influence of the design parameters on the predicted backbone curves. Additionally, Bayesian calibration is performed to update the input parameter distributions to correlate the model parameters to the collection of experimentally measured backbone curves.

42 ENGINEERING↗
DOE OSTI2020

Pahute Mesa-Oasis Valley Hydrostratigraphic Framework Model for Corrective Action Units 101 and 102: Central and Western Pahute Mesa, Nye County, Nevada (Rev. 0)

A new, revised three-dimensional (3-D) hydrostratigraphic framework model (HFM) for the Central and Western Pahute Mesa Corrective Action Units 101 and 102 was completed in 2019. The initial (Phase I) model was completed in 2002 and was documented in A Hydrostratigraphic Model and Alternatives for the Groundwater Flow and Contaminant Transport Model of Corrective Action Units 101 and 102: Central and Western Pahute Mesa, Nye County, Nevada (BN, 2002). Subsequent flow and transport modeling revealed the need to collect additional data to reduce uncertainties. The Phase II data collection and characterization effort included extensive well drilling and testing activities, and rebuilding of the Phase I 3-D HFM, resulting in the Phase II HFM (NSTec, 2014). Further drilling (Well ER-20-12), data collection, and interpretive work (e.g., Thirsty Canyon Lineament [Wurtz and Day, 2018]) were incorporated into the Pahute Mesa-Oasis Valley (PM-OV) HFM. The PM-OV HFM incorporates the area of interest from the Phase II HFM and adds additional areas, primarily to the north and west with minor additions to the south and east. The new, expanded area matches the PM-OV groundwater basin as defined in Fenelon et al. (2016) and includes Pahute Mesa, a former nuclear testing area at the Nevada National Security Site; and Oasis Valley, a groundwater discharge area downgradient from contaminant source areas on Pahute Mesa. The data and information necessary to build the PM-OV HFM are provided in Navarro (2019). The PM-OV HFM will be used by hydrologic modelers who are tasked with developing a model to determine how contaminants are transported by groundwater flow in an area of complex geology. The model area is large (more than 6,250 square kilometers) and geologically complex, including Paleozoic- to Mesozoic-age structures (e.g., thrust faults, Thirsty Canyon Lineament), at least seven Tertiary-age calderas, several intrusive bodies, and many relatively recent basin-and-range normal faults. Investigators from the U.S. Geological Survey; National Security Technologies, LLC; National Laboratories; and U.S. Department of Energy contractors have organized the more than 300 volcanic units and other rocks in the model area into 77 hydrostratigraphic units (HSUs). The volcanic rocks are subdivided into 42 aquifers, 11 confining units, and 9 composite units (containing both aquifer and confining unit rocks). The underlying pre-Tertiary rocks were divided into 5 HSUs, comprising 2 aquifers and 3 confining units. The model also includes 1 alluvial aquifer unit, 8 intrusive confining units, and 1 granite confining unit. The model depicts the thickness, extent, and geometric relationships of these HSUs (“layers” in the model) along with all the major structural features that control them, including calderas and faults. The most substantive differences between the Phase II HFM and the PM-OVHFM include (1) addition of the new data and resulting revised interpretations from the additional area encompassed by the PM-OV groundwater basin; (2) incorporation of 16 new faults; (3) 12 boreholes from the northern extension; (4) 2 additional caldera-collapse collars; and (5) correlation of the simulated faulting and hydrostratigraphy in the eastern part of the model domain with the delineations represented in the neighboring Rainier Mesa-Shoshone Mountain HFM-Prime and Yucca Flat-Climax Mine HFM. All PM-OV HFM delineations were based on published and unpublished data from geophysical investigations, surface geologic maps, and drill-hole records. Phase II approached model uncertainty using the model-building software to test model configurations and hydrologic consequences using a range of values for parameters such as fault offset amounts and HSU elevations. The PM-OV HFM expands on this approach to encompass the entire PM-OV groundwater basin.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Modular Hydronic Room Conditioning System (CRADA NFE-24-10120 Final Report)

This project presents the development and validation of high-fidelity numerical models for fin-tube heat exchangers to enable accurate performance prediction and informed design optimization. The modeling framework integrates detailed geometric specifications, thermophysical property data, and system-level constraints to simulate the heat exchanger’s behavior under a range of operating conditions. The model is calibrated using real-world product specifications and validated against experimental data collected from controlled cooling and heating tests. In cooling mode, the model captures the overall trends in capacity and outlet air temperature but tends to underpredict latent effects, especially at lower air flow rates. In heating mode, the simulation consistently overestimates both the thermal capacity and outlet air temperature, indicating the need for refinement in air-side heat transfer assumptions. Despite these deviations, the model provides a solid foundation for optimization, allowing key design variables to be tuned within physical and performance-based constraints. This research advances the ability to simulate, validate, and optimize fin-tube heat exchanger designs with greater confidence and efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Modular Hydronic Room Conditioning System

This project presents the development and validation of high-fidelity numerical models for fin-tube heat exchangers to enable accurate performance prediction and informed design optimization. The modeling framework integrates detailed geometric specifications, thermophysical property data, and system-level constraints to simulate the heat exchanger’s behavior under a range of operating conditions. The model is calibrated using real-world product specifications and validated against experimental data collected from controlled cooling and heating tests. In cooling mode, the model captures the overall trends in capacity and outlet air temperature but tends to underpredict latent effects, especially at lower air flow rates. In heating mode, the simulation consistently overestimates both the thermal capacity and outlet air temperature, indicating the need for refinement in air-side heat transfer assumptions. Despite these deviations, the model provides a solid foundation for optimization, allowing key design variables to be tuned within physical and performance-based constraints. This research advances the ability to simulate, validate, and optimize fin tube heat exchanger designs with greater confidence and efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1999

Bayesian Super-Resolved Surface Reconstruction From Multiple Images

Bayesian inference has been wed successfully for many problems where the aim is to infer the parameters of a model of interest. In this paper we formulate the three dimensional reconstruction problem as the problem of inferring the parameters of a surface model from image data, and show how Bayesian methods can be used to estimate the parameters of this model given the image data. Thus we recover the three dimensional description of the scene. This approach also gives great flexibility. We can specify the geometrical properties of the model to suit our purpose, and can also use different models for how the surface reflects the light incident upon it. In common with other Bayesian inference problems, the estimation methodology requires that we can simulate the data that would have been recoded for any values of the model parameters. In this application this means that if we have image data we must be able to render the surface model. However it also means that we can infer the parameters of a model whose resolution can be chosen irrespective of the resolution of the images, and may be super-resolved. We present results of the inference of surface models from simulated aerial photographs for the case of super-resolution, where many surface elements project into a single pixel in the low-resolution images.

Smelyanskiy, V. N.↗
DOE OSTI2022

A reaction–diffusion model for grayscale digital light processing 3D printing

We report that digital light processing (DLP) 3D printing is an additive manufacturing process that utilizes light patterns to photopolymerize a liquid resin into a solid. Due to the accuracy of modern digital micromirror devices (DMD) and recent advances in resin chemistry, it is now possible to create functionally graded structures using different light intensity values, also known as grayscale DLP (g-DLP). Different intensities of light lead to differences in the polymer crosslinking density after curing, which ultimately produces a part with gradients of material properties. However, g-DLP is a complicated process. First, the DLP printing is a highly coupled chemical and physical process that involves light propagation, chemical reactions, species diffusion, heat transfer, volume shrinkage, and changes in mechanical behaviors of the curing resin. Second, in g-DLP, light gradients create strong in plane gradients of chemical species concentrations in the curing liquid resin due to the strong dependence of light intensity on the rate of monomer crosslinking. Furthermore, light gradients through the depth create concentration gradients due to the degree of cure dependent light absorption and the use of photoabsorbers. These complex physical features of the printing process must be understood in order to properly control printing parameters such as light exposure time, printing speed, and grayscale variations to achieve accurate mechanical properties. In this paper, a photopolymerization reaction–diffusion model is developed and used in conjunction with experiments to investigate the coupled effects of light propagation, chemical reaction rates, and species diffusion during g-DLP 3D printing. The model is implemented numerically utilizing the finite difference method and simulation results are compared to experimental findings of simple printed structures. The agreement between experimental and model predictions of simple quantities of interest, such as geometric feature sizes, shows that the model can capture the overcure due to free-radical and other species diffusion during printing when grayscale patterns are employed. This model lays the groundwork for future extensions that can incorporate more complex coupled physics such as heat transfer, volume shrinkage, and material property evolution, which are critically important in utilizing g-DLP 3D printing for the fabrication of high-performance parts which excellent geometric and material property tolerances.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Site-decorated model for unconventional frustrated magnets: Ultranarrow phase crossover and two-dimensional spin reversal transition

Here, the site-decorated Ising model is introduced to advance the understanding and experimental realization of the recently discovered one-dimensional (1D) finite-temperature ultranarrow phase crossover in an external magnetic field, while mitigating the geometric complexities of traditional bond-decorated models. The unconventional frustration and physics are clarified by exactly mapping the 1D site-decorated Ising model in a magnetic field onto a zero-field bond-decorated 𝐽 1 −𝐽 2 Ising model with conventional geometrical frustration. Furthermore, although higher-dimensional Ising models in an external field remain unsolved exactly, an exact solution for a spin-reversal transition—driven by an exotic, hidden half-ice, half-fire state induced by site decoration—is derived. This transition, triggered by a slight variation in temperature or magnetic field—without changing its direction—even in the weak-field limit, offers a promising route toward energy-efficient applications such as data storage and processing. The results suggest that site decoration offers an avenue for materials and device design, particularly in systems such as mixed 𝑑−𝑓 compounds, optical lattices, and neural networks, calling for further studies with site-decorated Heisenberg models. In addition, the site-decorated model offers a rigorous test ground for artificial intelligence (AI) in science, as the analytic derivation of the present results was not only validated but also improved by a general-purpose large language model, inspiring the use of AI as scientific discoverer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗