Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Correlation between structural, magnetic, and dielectric properties of manganese substituted cobalt ferrite

Manganese (Mn) substituted cobalt ferrites (CoFe{sub 2−x}Mn{sub x}O{sub 4}, referred to CFMO) were synthesized and their structural, magnetic, and dielectric properties were evaluated. X-ray diffraction measurements coupled with Rietveld refinement indicate that the CFMO materials crystallize in the inverse cubic spinel phase. Temperature (T = 300 K and 10 K) dependent magnetization (M(H)) measurements indicate the long range ferromagnetic ordering in CoFe{sub 2−x}Mn{sub x}O{sub 4} (x = 0.00–0.15) ferrites. The cubic anisotropy constant (K{sub 1}(T)) and saturation magnetization (M{sub s}(T)) were derived by using the “law of approach” to saturation that describes the field dependence of M(H) for magnetic fields much higher than the coercive field (H{sub c}). Saturation magnetization (M{sub s}), obtained from the model, decreases with increasing temperature. For CoFe{sub 2}O{sub 4}, M{sub s} decreases from 3.63 μ{sub B} per formula unit (f.u.) to 3.47 μ{sub B}/f.u. with increasing temperature from 10 to 300 K. CFMO (0.00–0.15) exhibit the similar trend while the magnitude of M{sub s} is dependent on Mn-concentration. M{sub s}-T functional relationship obeys the Bloch's law. The lattice parameter and magnetic moment calculated for CFMO reveals that Mn ions occupying the Fe and Co position at the octahedral site in the inverse cubic spinel phase. The structure and magnetism in CFMO are further corroborated by bond length and bond angle calculations. The dielectric constant dispersion of CFMO in the frequency range of 20 Hz–1 MHz fits to the modified Debye's function with more than one ion contributing to the relaxation. The relaxation time and spread factor derived from modeling the experimental data are ∼10{sup −4} s and ∼0.35(±0.05), respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Alternative current conduction mechanisms of organic-inorganic compound [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4}

The [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} single crystal has been analyzed by X-ray powder diffraction patterns, differential scanning calorimetry (DSC), and electrical impedance spectroscopy. [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} crystallizes at room temperature in the monoclinic system with P2{sub 1}/{sub C} space group. Three phase transitions at T{sub 1} = 226 K, T{sub 2} = 264 K, and T{sub 3} = 297 K have been evidenced by DSC measurements. The electrical technique was measured in the 10{sup −1}–10{sup 7} Hz frequency range and 203–313 K temperature intervals. The frequency dependence of alternative current (AC) conductivity is interpreted in terms of Jonscher's law (developed). The AC electrical conduction in [N(CH{sub 3}){sub 3}H]{sub 2}CuCl{sub 4} compound is studied by two processes which can be attributed to a hopping transport mechanism: the correlated barrier hopping model in phases I, II, and III, the non-overlapping small polaron tunneling model in phase IV. The conduction mechanism is interpreted with the help of Elliot's theory, and the Elliot's parameters are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Assessment of the degree of hydration of ocular surface tissues using THz reflectometry

Using the effective medium model, the complex permittivity of the ocular surface system in the THz frequency range is considered. The penetration depth of THz radiation and the sensitivity of the reflected component to the dynamics of evaporation of the tear film are discussed. The results of in vivo experiments aimed to determine the reflection coefficient of the ocular surface using continuous THz reflectometers are well described using the developed model. (paper)

36 MATERIALS SCIENCE↗
NASA NTRS1990

Low-temperature microwave characteristics of pseudomorphic In(x)Ga(1-x) As/In(0.52)Al(0.48)As modulation-doped field-effect transistors

Low-temperature microwave measurements of both lattice-matched and pseudomorphic In(x)Ga(1-x)As/In(0.48)As (x = 0.53, 0.60, and 0.70) channel MODFETs on InP substrates were carried out in a cryogenic measurement system. The measurements were done in the temperature range of 77 to 300 K and in the frequency range of 0.5 to 11.0 GHz at different bias conditions. The cutoff frequency (fT) for the In(x)Ga(1-x)As/In(0.52)Al(0.48)As MODFETs improved from 22 to 29 GHz, 29 to 38 GHz, and 39 to 51 GHz, for x = 0.53, 0.60, and 0.70, respectively, as the temperature was lowered from 300 to 77 K, which is approximately a 31 percent increase at each composition. No degradations were observed in device performance. These results indicate an excellent potential of the pseudomorphic devices at low temperatures.

Lai, R.↗
DOE OSTI2015

Resonance Raman mapping as a tool to monitor and manipulate Si nanocrystals in Si-SiO{sub 2} nanocomposite

Specially designed laser heating experiment along with Raman mapping on Si-SiO{sub 2} nanocomposites elucidates the contribution of core and surface/interface in the intermediate frequency range (511–514 cm{sup −1}) Si phonons. The contribution of core to surface/interface increases with the size of Si nanocrystal, which itself increases on laser irradiation. Further, it is found that resonance Raman is crucial to the observance of surface/interface phonons and wavelength dependent Raman mapping can be corroborated with band edges observed in absorption spectra. This understanding can be gainfully used to manipulate and characterize Si-SiO{sub 2} nanocomposite, simultaneously for photovoltaic device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Experimental observation of 3-D, impulsive reconnection events in a laboratory plasma

Fast, impulsive reconnection is commonly observed in laboratory, space, and astrophysical plasmas. In this work, impulsive, local, 3-D reconnection is identified for the first time in a laboratory current sheet. The two-fluid, impulsive reconnection events observed on the Magnetic Reconnection Experiment (MRX) [Yamada et al., Phys Plasmas 4, 1936 (1997)] cannot be explained by 2-D models and are therefore fundamentally three-dimensional. Several signatures of flux ropes are identified with these events; 3-D high current density regions with O-point structure form during a slow buildup period that precedes a fast disruption of the reconnecting current layer. The observed drop in the reconnection current and spike in the reconnection rate during the disruption are due to ejection of these flux ropes from the layer. Underscoring the 3-D nature of the events, strong out-of-plane gradients in both the density and reconnecting magnetic field are found to play a key role in this process. Electromagnetic fluctuations in the lower hybrid frequency range are observed to peak at the disruption time; however, they are not the key physics responsible for the impulsive phenomena observed. Important features of the disruption dynamics cannot be explained by an anomalous resistivity model. An important discrepancy in the layer width and force balance between the collisionless regime of MRX and kinetic simulations is also revisited. The wider layers observed in MRX may be due to the formation of flux ropes with a wide range of sizes; consistent with this hypothesis, flux rope signatures are observed down to the smallest scales resolved by the diagnostics. Finally, a 3-D two-fluid model is proposed to explain how the observed out-of-plane variation may lead to a localized region of enhanced reconnection that spreads in the direction of the out-of-plane electron flow, ejecting flux ropes from the layer in a 3-D manner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Lightweight graphene nanoplatelet/boron carbide composite with high EMI shielding effectiveness

Lightweight graphene nanoplatelet (GNP)/boron carbide (B{sub 4}C) composites were prepared and the effect of GNPs loading on the electromagnetic interference (EMI) shielding effectiveness (SE) has been evaluated in the X-band frequency range. Results have shown that the EMI SE of GNP/B{sub 4}C composite increases with increasing the GNPs loading. An EMI SE as high as 37 ∼ 39 dB has been achieved in composite with 5 vol% GNPs. The high EMI SE is mainly attributed to the high electrical conductivity, high dielectric loss as well as multiple reflections by aligned GNPs inside the composite. The GNP/B{sub 4}C composite is demonstrated to be promising candidate of high-temperature microwave EMI shielding material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

A Graphene-Based Terahertz Hot Electron Bolometer with Johnson Noise Readout

In this paper, we present the development of a graphene-based hot electron bolometer with Johnson noise readout. The bolometer is a graphene microbridge connected to a log spiral antenna by Au contact pads. The Fourier transform spectrometer measurement shows the bolometer has high coupling efficiency in the frequency range from 0.3 to 1.6 THz. Using 300/77 K blackbody loads, we measure an optical noise equivalent power of 5.6 × 10{sup −12} W/Hz{sup 0.5} at 3.0 K. To understand the thermal transport inside the graphene microbridge, we measure the bolometers with different microbridge lengths at different bath temperatures. We find that the thermal conductance due to electron diffusion is significant in the bolometers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

High-performance terahertz wave absorbers made of silicon-based metamaterials

Electromagnetic (EM) wave absorbers with high efficiency in different frequency bands have been extensively investigated for various applications. In this paper, we propose an ultra-broadband and polarization-insensitive terahertz metamaterial absorber based on a patterned lossy silicon substrate. Experimentally, a large absorption efficiency more than 95% in a frequency range of 0.9–2.5 THz was obtained up to a wave incident angle as large as 70°. Much broader absorption bandwidth and excellent oblique incidence absorption performance are numerically demonstrated. The underlying mechanisms due to the combination of a waveguide cavity mode and impedance-matched diffraction are analyzed in terms of the field patterns and the scattering features. The monolithic THz absorber proposed here may find important applications in EM energy harvesting systems such as THz barometer or biosensor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

Probing confined acoustic phonons in free standing small gold nanoparticles

Polarized and depolarized spectra from gold (Au) nanoparticles of different sizes are investigated in the small size range, between 3 and 7 nm, using low frequency Raman spectroscopy. Acoustic vibrations of the free-standing Au nanoparticles are demonstrated with frequencies ranging from 5 to 35 cm{sup -1}, opening the way to the development of the acoustic resonators. A blue shift in the phonon peaks along with the broadening is observed with a decrease in particle size. Comparison of the measured frequencies with vibrational dynamics calculation and an examination as from the transmission electron microscopy results ascertain that the low frequency phonon modes are due to acoustic phonon quantization. Our results show that the observed low frequency Raman scattering originates from the spherical (l = 0) and quadrupolar (l = 2) vibrations of the spheroidal mode due to plasmon mediated acoustic vibrations in Au nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Optimization of relativistic backward wave oscillator with non-uniform slow wave structure and a resonant reflector

This letter optimizes synchronously 18 parameters of a relativistic backward wave oscillator with non-uniform slow wave structure (SWS) and a resonant reflector by using the parallel genetic algorithms and particle-in-cell simulation. The optimization results show that the generation efficiency of microwave from the electron beam has increased 32% compared to that of the original device. After optimization, the electromagnetic mode propagating in the resonant changes from the original TM{sub 020} mode of reflector to higher-order TM{sub 021} mode, which has a high reflection coefficient in a broader frequency range than that of the former. The modulation of current inside the optimized device is much deeper than that in the original one. The product of the electric field and current is defined. Observing this product, it is found that the interaction of the electron beam with the electromagnetic wave in the optimized device is much stronger than that in the original device, and at the rear part of SWS of the optimized device, the electron beam dominantly gives out the energy to the electromagnetic wave, leading to the higher generation efficiency of microwave than that of the original device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Piezoelectric surface acoustical phonon amplification in graphene on a GaAs substrate

We study the interaction of Dirac Fermions in monolayer graphene on a GaAs substrate in an applied electric field by the combined action of the extrinsic potential of piezoelectric surface acoustical phonons of GaAs (piezoelectric acoustical (PA)) and of the intrinsic deformation potential of acoustical phonons in graphene (deformation acoustical (DA)). We find that provided the dc field exceeds a threshold value, emission of piezoelectric (PA) and deformation (DA) acoustical phonons can be obtained in a wide frequency range up to terahertz at low and high temperatures. We found that the phonon amplification rate R{sup PA,DA} scales with T{sub BG}{sup S−1} (S=PA,DA), T{sub BG}{sup S} being the Block−Gru{sup ¨}neisen temperature. In the high-T Block−Gru{sup ¨}neisen regime, extrinsic PA phonon scattering is suppressed by intrinsic DA phonon scattering, where the ratio R{sup PA}/R{sup DA} scales with ≈1/√(n), n being the carrier concentration. We found that only for carrier concentration n≤10{sup 10}cm{sup −2}, R{sup PA}/R{sup DA}>1. In the low-T Block−Gru{sup ¨}neisen regime, and for n=10{sup 10}cm{sup −2}, the ratio R{sup PA}/R{sup DA} scales with T{sub BG}{sup DA}/T{sub BG}{sup PA}≈7.5 and R{sup PA}/R{sup DA}>1. In this regime, PA phonon dominates the electron scattering and R{sup PA}/R{sup DA}<1 otherwise. This study is relevant to the exploration of the acoustic properties of graphene and to the application of graphene as an acoustical phonon amplifier and a frequency-tunable acoustical phonon device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Structural and electrical properties of nanostructured Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7}

Graphical abstract: - Highlights: • Nanostructured pyrophosphate Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} were synthesized and characterized by XRD and SEM. • The ac-conductivity at different values of temperature for Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} nanomaterials shows frequency independence in the lower frequency range. • Obvious improvements of the electrical conductivity and the electrochemical properties are achieved comparatively Mn{sub 2}P{sub 2}O{sub 7}. • The electrochemical behaviors of Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} were studied using cyclic voltammetry. - Abstract: The nanostructured pyrophosphate Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} was prepared. The synthesis technique was based on the hydrothermal method at 150 °C using poly-ethylene-glycol (PEG-10000) as surfactant with further calcination at 500 °C. A structural analysis of Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} compound was carried out by applying X-ray diffraction (XRD) and using the Rietveld method. Morphological characterizations were performed using a scanning electron microscope (SEM) and transmission electron microscopy (TEM). A comparative study of the electrical conductivity of Mn{sub 2}P{sub 2}O{sub 7} and Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} nanomaterials was carried out by impedance spectroscopy in the temperature range 500–680 °C. The activation energies for MnP{sub 2}O{sub 7} and Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} were 2.00 and 0.88 eV, respectively. Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} nanomaterial presents a good electric conductivity compared to Mn{sub 2}P{sub 2}O{sub 7}, due to the substitution effect. The improvement of the electronic and ionic conductivity makes the Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} nanomaterial possible electrode materials for rechargeable batteries. The electrochemical behaviors of Ni{sub 0.25}Co{sub 0.75}MnP{sub 2}O{sub 7} were studied using cyclic voltammetry.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Heterobarrier Varactors with Nonuniformly Doped Modulation Layers

Optimum shape of the capacitance–voltage (C–V) characteristic is a critical parameter determining the efficiency of frequency multiplication in heterobarrier varactors (HBVs) operating in the millimeter and submillimeter frequency ranges. A numerical model for calculating the C–V characteristics and leakage currents of HBV heterostructures with arbitrary composition and doping profiles has been verified on the basis of published and original experimental data. A specially designed HBV heterostructure with three undoped InAlAs/AlAs/InAlAs barriers surrounded by nonuniformly doped n-InGaAs modulation layers has been grown by molecular beam epitaxy on InP substrate. Prototype HBVs manufactured using the proposed heterostructure demonstrated a nearly cosine shape of the C–V curve at bias voltages up to 2 V, increased overlap capacitance, and low leakage currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Symmetric Achromatic Variability in Active Galaxies: A Powerful New Gravitational Lensing Probe?

We report the discovery of a rare new form of long-term radio variability in the light curves of active galaxies (AG)—symmetric achromatic variability (SAV)—a pair of opposed and strongly skewed peaks in the radio flux density observed over a broad frequency range. We propose that SAV arises through gravitational milli-lensing when relativistically moving features in AG jets move through gravitational lensing caustics created by 10{sup 3}--10{sup 6} M{sub ⊙} subhalo condensates or black holes located within intervening galaxies. The lower end of this mass range has been inaccessible with previous gravitational lensing techniques. This new interpretation of some AG variability can easily be tested and if it passes these tests, will enable a new and powerful probe of cosmological matter distribution on these intermediate-mass scales, as well as provide, for the first time, micro-arcsecond resolution of the nuclei of AG—a factor of 30–100 greater resolution than is possible with ground-based millimeter very-long-baseline interferometry.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

Wind turbine blade fatigue tests: lessons learned and application to SHM system development

This paper presents experimental results of several structural health monitoring (SHM) methods applied to a 9-meter CX-100 wind turbine blade that underwent fatigue loading. The blade was instrumented with piezoelectric transducers, accelerometers, acoustic emission sensors, and foil strain gauges. It underwent harmonic excitation at its first natural frequency using a hydraulically actuated resonant excitation system. The blade was initially excited at 25% of its design load, and then with steadily increasing loads until it failed. Various data were collected between and during fatigue loading sessions. The data were measured over multiple frequency ranges using a variety of acquisition equipment, including off-the-shelf systems and specially designed hardware developed by the authors. Modal response, diffuse wave-field transfer functions, and ultrasonic guided wave methods were applied to assess the condition of the wind turbine blade. The piezoelectric sensors themselves were also monitored using a sensor diagnostics procedure. This paper summarizes experimental procedures and results, focusing particularly on fatigue crack detection, and concludes with considerations for implementing such damage identification systems, which will be used as a guideline for future SHM system development for operating wind turbine blades.

17 WIND ENERGY↗
DOE OSTI2014

A differential dielectric spectroscopy setup to measure the electric dipole moment and net charge of colloidal quantum dots

A sensitive dielectric spectroscopy setup is built to measure the response of nanoparticles dispersed in a liquid to an alternating electric field over a frequency range from 10{sup −2} to 10{sup 7} Hz. The measured complex permittivity spectrum records both the rotational dynamics due to a permanent electric dipole moment and the translational dynamics due to net charges. The setup consists of a half-transparent capacitor connected in a bridge circuit, which is balanced on pure solvent only, using a software-controlled compensating voltage. In this way, the measured signal is dominated by the contributions of the nanoparticles rather than by the solvent. We demonstrate the performance of the setup with measurements on a dispersion of colloidal CdSe quantum dots in the apolar liquid decalin.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Time Domain Filtering of Resolved Images of Sgr A{sup ∗}

The goal of the Event Horizon Telescope (EHT) is to provide spatially resolved images of Sgr A*, the source associated with the Galactic Center black hole. Because Sgr A* varies on timescales that are short compared to an EHT observing campaign, it is interesting to ask whether variability contains information about the structure and dynamics of the accretion flow. In this paper, we introduce “time-domain filtering,” a technique to filter time fluctuating images with specific temporal frequency ranges and to demonstrate the power and usage of the technique by applying it to mock millimeter wavelength images of Sgr A*. The mock image data is generated from the General Relativistic Magnetohydrodynamic (GRMHD) simulation and the general relativistic ray-tracing method. We show that the variability on each line of sight is tightly correlated with a typical radius of emission. This is because disk emissivity fluctuates on a timescale of the order of the local orbital period. Time-domain filtered images therefore reflect the model dependent emission radius distribution, which is not accessible in time-averaged images. We show that, in principle, filtered data have the power to distinguish between models with different black-hole spins, different disk viewing angles, and different disk orientations in the sky.

79 ASTRONOMY AND ASTROPHYSICS↗