Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “forcing fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

A rotating superconducting solenoid for 100 kWh energy storage

Two concentric superconducting solenoids, one rotating, the other stationary are analyzed for energy storage in space. Energy is transferred from the rotating mass through a shaft coupled to a motor-generator. The inner windings interact with the magnetic field of the outer solenoid to cancel the centrifugal and self-field forces of the flywheel rim. Current is induced in the inner solenoid thus requiring no separate power supply, while the current in the outer solenoid must vary with the angular velocity of the flywheel. The effect of the gap and scaling laws are developed. The efficiency in energy per unit mass is marginally attractive.

Waynert, J.↗

Phase propagation of the solar modulation of galactic cosmic rays

The phase of the 11-yr galactic cosmic ray variation, due to a varying rate of emission of long-lived, propagating regions of enhanced scattering, travels faster than the scattering regions themselves. The radial speed of the 11-yr phase in the quasi-steady force field approximation is exactly twice the speed of the individual episodic decreases. A time-dependent numerical solution for 1-GeV protons at 1 and 30 AU gives a phase speed which is 1.85 times the propagation speed of the individual decreases.

Forman, M. A.↗

Approximate Cartesian state transition matrix

Based on a Taylor series expansion, an easily-computed approximation to the Cartesian state transition matrix is presented for a general velocity-independent force field. Suitable for the short time intervals encountered in onboard navigation applications of the extended Kalman filter, it provides approximately five decimal digits of accuracy for earth orbiting spacecraft with update intervals of one minute, and better accuracy for shorter intervals.

Markley, F. L.↗

Flyby - Numerical experiments on a galaxy orbiting within a galaxy cluster

Dynamical effects on a self-consistent stellar system in orbit around an attracting force center have been studied by means of numerical experiments. Globular clusters in the Galaxy, galaxies within a cluster, and dwarf spheroidal galaxies in orbit around our Galaxy are examples of this dynamical problem. Stars within the galaxy move in the combined self-consistent and external (cluster) force fields, in an accelerated frame, and the galaxy orbit is integrated at the same time. The principal result found is that, in practice, a spherical galaxy either suffers little mass loss (less than 1 percent) or is totally disrupted. A disruption criterion based on the ratio of tidal stress to internal stress within the galaxy describes the results succinctly. This criterion is used to discuss the distribution of dark mass in galaxy clusters. A galaxy envelope expands, rather than being tidally truncated, following a flyby. Spiral galaxies can show tidal damage after flying past the cluster center, even without a close encounter with another galaxy.

Miller, R. H.↗

The effect of atmospheric drag on position and velocity errors of orbiting spacecraft

A model, in closed form, of position and velocity changes due to atmospheric drag of a spacecraft in orbit about a planetary body is presented, considering primarily the effects of a two-body force field. Calculations for both elliptical and circular geometries indicate that the simplifying assumptions in the analysis make the theory more accurate (to less than 1 percent error) for lengthier mappings, when the drag effect becomes quite significant. The downtrack error demonstrates a quadratic growth, while the radial error demonstrates a linear growth.

Russell, R. Kent↗

Solar modulation of galactic antiprotons

Galactic antiproton data of current interest lie in an energy regime heavily influenced by solar modulation. Correcting for it needs to be done more carefully than it has been in the past. The well-known force-field analytic approximation of the spherically-symmetric, steady-state, cosmic-ray transport equation is applied in order to account for modulation down to at least 100 MeV. A sample solution which applies to the currently available antiproton data set (1979-80), and can be used to accurately modulate any possible interstellar antiproton spectrum, is given. The solution is easily adapted for comparison to future measurements. It also shows that boosting the low-energy (less than 600 MeV) side of the interstellar antiproton spectrum will not affect the low-energy spectrum at 1 AU, due to strong adiabatic deceleration during that time.

Perko, J. S.↗

Computing Optimal Multiarc Trajectories

Optimal Multi-Arc Trajectories (OMAT) computer program designed to calculate solution to optimal-trajectory problem in cases of low thrust-to-weight ratios. Developed for two-body exoatmospheric problem with three degrees of freedom in inverse-square force field. Offers two different options: impulsive changes in velocity and finite burns with low thrust-to-weight ratios. Two distinct solutions available from program: optimal multi-impulse (OMI) solution and optimal multiburn (OMB) solution. Two solutions obtained separately, or results of OMI solution used to guess unknown parameters of OMB solution. Written for DEC VAX-series computer. Written completely in FORTRAN 77.

Jezewski, Donald J.↗

Cloud-radiative forcing and climate - Results from the Earth Radiation Budget Experiment

The spaceborne Earth Radiation Budget Experiment was begun in 1984 to obtain quantitative estimates of the global distributions of cloud-radiative forcing. The magnitude of the observed net cloud forcing is about four times greater than the expected value of radiative forcing from a doubling of CO2; the shortwave and longwave components of cloud forcing are about 10 times as large as those for a CO2 doubling. Small changes in the cloud-radiative forcing fields can therefore play a significant role as a climate-feedback mechanism.

Ramanathan, V.↗

Facilities for microgravity combustion research

Combustion science and applications have benefited in unforeseen ways from experimental research performed in the low-gravity environment. The capability to control for the first time the influence of gravitational buoyancy has provided some insight into soot formation in droplet combustion, the nature of flammability limits in premixed gases, and the relationship between normal-gravity and low-gravity material flammability that may influence how materials are best selected for routine use in habitable spacecraft. The opportunity to learn about these complex phenomena is derived from the control of the ambient body-force field and, perhaps as importantly, the simplified boundary conditions that can be established in well designed low-gravity combustion experiments. A description of the test facilities and typical experimental apparatus are provided; and conceptual plans for a Space Station Freedom capability, the Modular Combustion Facility, are described.

Sacksteder, Kurt R.↗

Optimal orbit transfer suitable for large flexible structures

The problem of continuous low-thrust planar orbit transfer of large flexible structures is formulated as an optimal control problem with terminal state constraints. The dynamics of the spacecraft motion are treated as a point-mass central force field problem; the thrust-acceleration magnitude is treated as an additional state variable; and the rate of change of thrust-acceleration is treated as a control variable. To ensure smooth transfer, essential for flexible structures, an additional quadratic term is appended to the time cost functional. This term penalizes any abrupt change in acceleration. Numerical results are presented for the special case of a planar transfer.

Chatterjee, Alok K.↗

Advances in fluid dynamics

Various papers on advances in fluid dynamics are presented. Individual topics addressed include: nonunique solutions of the Euler equations; numerical solution of the biharmonic equation using a spectral multigrid method; finite-volume shape and placement for efficiency, accuracy, and physics; NND schemes and their application to numerical simulation of complex plume flow problems; symbolic analysis and computational algorithm construction; and velocity and mass flux distribution measurements of spherical glass beads in air flow in a 90-deg vertical-to-horizontal bend. Also discussed are: hyperbolic solution adaptive mesh generation; progress and future directions in CFD; numerical simulation of shock focusing; microbubble formation and splitting in a turbulent boundary layer for turbulence reduction; numerical study of spherical Taylor-Couette flow, trajectories of vortex lines beneath a free surface or above a plane; and a mathematical model for response of the coronary circulation to high sustained gravitational force fields.

Ballhaus, W. F., Jr.↗

Vibrations in small Mg clusters

The equilibrium geometries, binding energies, and harmonic frequencies of Mg3 and Mg4 have been determined using large atomic natural orbital basis sets in conjunction with high levels of electron correlation. The correlation treatments comprise multireference configuration interaction (MRCI), singles and doubles coupled-cluster (CCSD) theory and the CCSD(T) extension that includes a perturbational estimate of connected triple excitations. As with previous studies of small Be clusters, the CCSD(T) method is found to reproduce the MRCI results with a remarkable degree of accuracy and at a fraction of the computational cost. Using the CCSD(T) method, full quartic force fields for Mg3 and Mg4 have been determined and anharmonic analyses have been performed using second-order perturbation theory. Vibration-rotation interaction constants and centrifugal distortion constants have also been determined.

Lee, Timothy J.↗

Teleautonomous guidance for mobile robots

Teleautonomous guidance (TG), a technique for the remote guidance of fast mobile robots, has been developed and implemented. With TG, the mobile robot follows the general direction prescribed by an operator. However, if the robot encounters an obstacle, it autonomously avoids collision with that obstacle while trying to match the prescribed direction as closely as possible. This type of shared control is completely transparent and transfers control between teleoperation and autonomous obstacle avoidance gradually. TG allows the operator to steer vehicles and robots at high speeds and in cluttered environments, even without visual contact. TG is based on the virtual force field (VFF) method, which was developed earlier for autonomous obstacle avoidance. The VFF method is especially suited to the accommodation of inaccurate sensor data (such as that produced by ultrasonic sensors) and sensor fusion, and allows the mobile robot to travel quickly without stopping for obstacles.

Borenstein, J.↗

An improved computational technique for calculating electromagnetic forces and power absorptions generated in spherical and deformed body in levitation melting devices

An improved computational technique for calculating the electromagnetic force field, the power absorption and the deformation of an electromagnetically levitated metal sample is described. The technique is based on the volume integral method, but represents a substantial refinement; the coordinate transformation employed allows the efficient treatment of a broad class of rotationally symmetrical bodies. Computed results are presented to represent the behavior of levitation melted metal samples in a multi-coil, multi-frequency levitation unit to be used in microgravity experiments. The theoretical predictions are compared with both analytical solutions and with the results of previous computational efforts for the spherical samples and the agreement has been very good. The treatment of problems involving deformed surfaces and actually predicting the deformed shape of the specimens breaks new ground and should be the major usefulness of the proposed method.

Zong, Jin-Ho↗

The structures, binding energies and vibrational frequencies of Ca3 and Ca4: An application of the CCSD(T) method

The Ca3 and Ca4 metallic clusters have been investigated using state-of-the-art ab initio quantum mechanical methods. Large atomic natural orbital basis sets have been used in conjunction with the singles and doubles coupled-cluster (CCSD) method, a coupled-cluster method that includes a perturbational estimate of connected triple excitations, denoted CCSD(T), and the multireference configuration interaction (MRCI) method. The equilibrium geometries, binding energies and harmonic vibrational frequencies have been determined with each of the methods so that the accuracy of the coupled-cluster methods may be assessed. Since the CCSD(T) method reproduces the MRCI results very well, cubic and quartic force fields of Ca3 and Ca4 have been determined using this approach and used to evaluate the fundamental vibrational frequencies. The infrared intensities of both the e' mode of Ca3 and the t2 mode of Ca4 are found to be small. The results obtained in this study are compared and contrasted with those from our earlier studies on small Be and Mg clusters.

Lee, Timothy J.↗

Experimenter's data package for the descending layers rocket

In response to a proposal from Science Applications International Corporation (SAIC), NASA Headquarters has approved a sounding rocket mission designed to study the physics of intermediate layers in the Earth's ionosphere at middle latitudes. The experiment will be carried out by a team of scientists and engineers from the NASA Wallops Flight Facility, SAIC, the NASA Goddard Space Flight Center, and the Millstone Hill radar observatory. The mission will involve the launch of an instrumented sounding rocket from the Wallops Island rocket range in the summer of 1994, with the objective of penetrating a descending ionized layer in the E-region between altitudes of 115 and 140 km. Instrumentation aboard the rocket will measure the ion and neutral composition of the layer, its plasma density, driving wind and electric field forces, the thermal ion distribution function, and electron temperature. Depending on payload weight constraints and subject to availability, a particle detector to measure energetic ion and/or electron fluxes near the layer may also be included. This document was prepared as a reference for the NASA payload development and experiment teams, for distribution at the Project Initiation Conference (PIC). The design specifications discussed herein are therefore of a preliminary nature; the intent is to promote open discussions between experimenters and NASA engineers that will lead to a final design capable of achieving the experiment objectives.

Earle, Greg↗

National launch system overview with focus on cargo transfer vehicle

As a result of the Augustine Committee's recommendation to the National Space Council, NASA, and the DOD have embarked on a joint program to provide the nation with a new capability for transporting payloads into space. The National Launch System (NLS) consists of a family of modular launch vehicles, combining elements of current launchers (Titan and Shuttle) with newly developed components. This family consists of (1) NLS-1 (a vehicle capable of delivering 80 k to SSF), (2) NLS-2 (a vehicle capable of delivering 50k to LEO), and (3) NLS-3 (a vehicle capable of delivering 20 k to LEO). Management of the program is shared between the two agencies with a Joint Program Office carrying out the level 2 management and integration function while both the NASA and Air Force field organizations are charged with the various development and operational responsibilities.

Buchanan, Harry↗

The electrodynamic and hydrodynamic phenomena in magnetically-levitated molten droplets. I - Steady state behavior

A mathematical formulation is given and computed results are presented describing the behavior of electromagnetically-levitated metal droplets under the conditions of microgravity. In the formulation the electromagnetic force field is calculated using a modification of the volume integral method and these results are then combined with the FIDAP code to calculate the steady state melt velocities. The specific computational results are presented for the conditions corresponding to the planned IML-2 Space Shuttle experiment, using the TEMPUS device, which has separate 'heating' and 'positioning' coils. While the computed results are necessarily specific to the input conditions, some general conclusions may be drawn from this work. These include the fact that for the planned TEMPUS experiments to positioning coils will produce only a weak melt circulation, while the heating coils are like to produce a mildly turbulent recirculating flow pattern within the samples. The computed results also allow us to assess the effect of sample size, material properties and the applied current on these phenomena.

Zong, Jin-Ho↗