Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “faces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Nonaxisymmetric incompressible hydrostatic pressure effects in radial face seals

A flat seal having an angular misalinement is analyzed, taking into account the radial variations in seal clearance. An analytical solution for axial force, tilting moment, and leakage is presented that covers the whole range from zero to full angular misalinement. Nonaxisymmetric hydrostatic pressures due to the radial variations in the film thickness have a considerable effect on seal stability. When the high pressure is on the outer periphery of the seal, both the axial force and the tilting moment are nonrestoring. The case of high-pressure seals where cavitation is eliminated is discussed, and the possibility of dynamic instability is pointed out.

Etsion, I.↗
NASA NTRS1977

Impurity concentrations and surface charge densities on the heavily doped face of a silicon solar cell

Increased solar cell efficiencies are attained by reduction of surface recombination and variation of impurity concentration profiles at the n(+) surface of silicon solar cells. Diagnostic techniques are employed to evaluate the effects of specific materials preparation methodologies on surface and near surface concentrations. It is demonstrated that the MOS C-V method, when combined with a bulk measurement technique, yields more complete concentration data than are obtainable by either method alone. Specifically, new solar cell MOS C-V measurements are combined with bulk concentrations obtained by a successive layer removal technique utilizing measurements of sheet resistivity and Hall coefficient.

Weinberg, I.↗
NASA NTRS1977

A synopsis of the weather problems facing today's general aviation pilots

Concentration on weather to data has primarily been at the point of observation. There have been efforts to obtain and disseminate en route weather through pilot reports (PIREPS), but the efforts have been meager. What is needed is the cooperative efforts on the application of technology to the acquisition and dissemination of the en route weather data for those pilots in the air as well as those who are flight planning on the ground. A comprehensive three-dimensional computer storage system is proposed that receives weather information from all aircraft on IFR flight plans and stores this information by altitude and geographic coordinates. Also, a report on the Federal Aviation Administration's Research Engineering and Development Aviation Weather Program from the aspect of past, present and future is given.

Pope, J. C.↗
NASA NTRS1977

Problems pilots face involving wind shear

Educating pilots and the aviation industry about wind shears presents a major problem associated with this meteorological phenomenon. The pilot's second most pressing problem is the need for a language to discuss wind shear encounters with other pilots so that the reaction of the aircraft to the wind shear encounter can be accurately described. Another problem is the flight director which gives a centered pitch command for a given angular displacement from the glide slope. It was suggested that they should instead be called flight path command and should not center unless the aircraft is actually correcting to the flight path.

Melvin, W. W.↗
NASA NTRS1978

Development of flightweight static face seals for 75.84 MPa /11 000 psi/ pressure and cryogenic temperatures

The development of a static seal configuration to meet the lightweight low-leakage requirements of the Space Shuttle Main Engine (pressure carrying capability of up to 75.84 MPa) is discussed. The design features, fabrication methods, lab testing, and performance of seal are examined. Flange and bolt details of the joint assembly are considered with attention to an ultrasonic technique for measuring preload in the bolts. Methods used for leak testing in the laboratory and in the field are described; the practicality of the procedures is considered. Attention is directed to hydrogen-environment embrittlement and its influence on seal and joint design.

Daniels, C. M.↗
NASA NTRS1977

Hydrodynamic effects in a misaligned radial face seal

Hydrodynamic effects in a flat seal having an angular misalignment are analyzed, taking into account the radial variation in seal clearance. An analytical solution for axial force, restoring moment, and transverse moment is presented that covers the whole range from zero to full angular misalignment. Both low pressure seals with cavitating flow and high pressure seals with full fluid film are considered. Strong coupling is demonstrated between angular misalignment and transverse moment which leads the misalignment vector by 90 degrees. This transverse moment, which is entirely due to hydrodynamic effects, is a significant factor in the seal operating mechanism.

Etsion, I.↗
NASA NTRS1978

Hydrodynamic effects in a misaligned radial face seal

Hydrodynamic effects in a flat seal having an angular misalignment are analyzed, taking into account the radial variation in seal clearance. An analytical solution for axial force, restoring moment, and transverse moment is presented that covers the whole range from zero to full angular misalignment. Both low pressure seals with cavitating flow and high pressure seals with full fluid film are considered. Strong coupling is demonstrated between angular misalignment and transverse moment which leads the misalignment vector by 90 degrees. This transverse moment, which is entirely due to hydrodynamic effects, may be a significant factor in seal operating mechanism.

Etsion, I.↗
NASA NTRS1981

Cutting holes in fabric-faced panels

Tool has 2 carbide inserts that bore clean holes through fibrous material with knifelike slicing action. Cutting edge of insert is curved, with plane inner surface at 30 degree angle to tool axis. Drill press or hand-held drill can be used to hold cutting tool.

Peterson, S. A.↗
NASA NTRS1980

The role of technology as air transportation faces the fuel situation

Perspectives on the air transportation fuel stituation are discussed including intercity air traffic, airline fuel consumption, fuel price effects on ticket price, and projected traffic and fuel useage between now and the year 2000. Actions taken by the airlines to reduce consumption are reviewed, as well as efforts currently underway to improve fuel consumption. Longer range technology payoffs resulting from NASA research programs are reviewed and results from studies on the use of alternate fuels are discussed.

Driver, C.↗
NASA NTRS1979

The role of technology as air transportation faces the fuel situation

The discussion of system integrators whose task is to identify the application and payoff of various research disciplines is limited to aircraft of the subsonic commerical transport type. The aim is to provide a brief description of the existing fuel situation, the progress made in fuel reduction, near-term prospects for further reductions, and long-term prospects for even further reductions, all primarily from the technology point of view.

Driver, C.↗
NASA NTRS1981

Flow field investigation of atmospheric braking for high drag vehicles with forward facing jets

Flow field phenomena associated with a supersonic jet issuing upstream into a hypervelocity flow field were investigated experimentally in support of a new space vehicle aerobraking concept developed by Boeing for Orbital Transfer Vehicles (OTV's). Tests were made on OTV models in the NASA Langley 22 in., Mach 20 helium tunnel with jet exit Mach numbers from 1.0 to 6.18 and ballute half angles of 45 and 60 deg. Force data were taken at zero angle of attack to determine the effect of ballute angle, jet Mach number and jet flow rate on vehicle drag. Bow shock structures were examined in terms of flow steadiness to define acceptable jet flow rate regimes for use in drag modulation. Limited tests were made to obtain pressure and temperature distributions around the ballute and to determine the ballute center of pressure. Test results are presented and discussed relative to OTV application and similar previous experimental investigations.

Grenich, A. F.↗
NASA NTRS1981

A title-gap flow model for use in aerodynamic loads assessment of space shuttle thermal protection system: Parallel gap faces

The problem of predicting aerodynamic loads on the insulating tiles of the space shuttle thermal protection system (TPS) is discussed and seen to require a method for predicting pressure and mass flux in the gaps between tiles. A mathematical model of the tile-gap flow is developed, based upon a slow viscous (Stokes) flow analysis, and is verified against experimental data. The tile-gap pressure field is derived from a solution of the two-dimensional Laplace equation; the mass-flux vector is then calculated from the pressure gradient. The means for incorporating this model into a lumped-parameter network analogy for porous-media flow is given. The means for incorporating this model into a lumped-parameter network analogy for porous-media flow is given. The flow model shows tile-gap mass flux to be very sensitive to the gap width indicating a need for coupling the TPS flow and tile displacement calculation. Analytical and experimental work to improve TPS flow predictions and a possible shuttle TPS hardware modification are recommended.

Dwoyer, D. L.↗
NASA NTRS1982

Use of a variable exposure photographic pyrometer to measure surface temperatures on a hemispherical-face model

The use of a photographic pyrometer for nonintrusive measurement of high temperature surfaces in a wind tunnel test is described. The advantages of the pyrometer for measuring surfaces whose unique shape makes use of thermocouples difficult are pointed out. The use of computer operated densitometers or optical processors for the data reduction is recommended.

Kantsios, A. G.↗