Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Molecular dynamics and quasidynamics simulations of the annealing of bulk and near-surface interstitials formed in molecular-beam epitaxial Si due to low-energy particle bombardment during deposition

The relaxation, diffusion, and annihilation of split and hexagonal interstitials resulting from 10 eV Si irradiation of (2x1)-terminated Si(100) are investigated. Molecular dynamics and quasidynamics simulations, utilizing the Tersoff many-body potential are used in the investigation. The interstitials are created in layers two through six, and stable atomic configurations and total potential energies are derived as a function of site symmetry and layer depth. The interstitial Si atoms are allowed to diffuse, and the total potential energy changes are calculated. Lattice configurations along each path, as well as the starting configurations, are relaxed, and minimum energy diffusion paths are derived. The results show that the minimum energy paths are toward the surface and generally involved tetrahedral sites. The calculated interstitial migration activation energies are always less than 1.4 eV and are much lower in the near-surface region than in the bulk.

Kitabatake, M.↗

Navigation, guidance, and control systems for V/STOL aircraft.

The development of digital autopilots and integrated avionics systems, applicable to many classes of vehicles and missions, was undertaken by Sperry Flight Systems in the mid-sixties. The first application of the system was planned for automatic flight control in the U.S. supersonic transport; the termination of that program, however, thwarted any flight experience. The second application, which has additional navigation and energy management functions, is an airborne simulator of the space shuttle vehicle. The latter system underwent a series of successful flight tests in a CV-990 aircraft under contract with NASA. The third application, which has new electronic displays, air data computation, and time-constrained guidance (i.e., specified position and altitude at a specified time), is in the DOT/NASA STOLAND test program. The STOLAND system is described specifically in this paper.

Osder, S. S.↗

The Lewis Research Center geomagnetic substorm simulation facility

A simulation facility was established at the NASA-Lewis Research Center to determine the response of typical spacecraft materials to the geomagnetic substorm environment and to evaluate instrumentation that will be used to monitor spacecraft system response to this environment. Space environment conditions simulated included the thermal-vacuum conditions of space, solar simulation, geomagnetic substorm electron fluxes and energies, and the low energy plasma environment. Measurements for spacecraft material tests included sample currents, sample surface potentials, and the cumulative number of discharges. Discharge transients were measured by means of current probes and oscilloscopes and were verified by a photomultiplier.

Berkopec, F. D.↗

The GSFC NASTRAN thermal analyzer new capabilities

An overview of four analysis capabilities, which developed and integrated into the NASTRAN Thermal Analyzer, is given. To broaden the scope of applications, these additions provide the NTA users with the following capabilities: (1) simulating a thermal louver as a means of the passive thermal control, (2) simulating a fluid loop for transporting energy as a means of the active thermal control, (3) condensing a large sized finite element model for an efficient transient thermal analysis, and (4) entering multiple boundary condition sets in a single submission for execution in steady state thermal analyses.

Lee, H. P.↗

The Lewis Research Center geomagnetic substorm simulation facility

A simulation facility was established to determine the response of typical spacecraft materials to the geomagnetic substorm environment and to evaluate instrumentation that will be used to monitor spacecraft system response to this environment. Space environment conditions simulated include the thermal-vacuum conditions of space, solar simulation, geomagnetic substorm electron fluxes and energies, and the low energy plasma environment. Measurements for spacecraft material tests include sample currents, sample surface potentials, and the cumulative number of discharges. Discharge transients are measured by means of current probes and oscilloscopes and are verified by a photomultiplier. Details of this facility and typical operating procedures are presented.

Berkopec, F. D.↗

Magnetohydrodynamics of atmospheric transients. I - Basic results of two-dimensional plane analyses

The dynamic behavior of transients in a stratified atmosphere in the presence of a magnetic field is investigated with the two-dimensional plane formulation, i.e., the formulation in which variations of the flow and magnetic field are confined within a plane. It is pointed out that, in the plane formulation, the noncompressible transverse waves (often called the Alfven waves) are excluded. The compressible responses of the atmosphere are then examined with a temperature perturbation (simulating a sudden local release of energy by a flare) as functions of the configuration of magnetic field and field strength. It is shown that (1) in the open (mostly radial) magnetic field, the propagation of 'bubble-like' density enhancements, the coronal transients, result; while (2) in the closed (mostly azimuthal) field, the density enhancement forms a pair of 'horns' near the foot points of field lines similar to that often observed by coronagraphs after flares. Discussions in interpreting the results in terms of the anisotropic propagation of the fast and slow waves (or shocks) are presented together with consideration of possible consequences with the inclusion of the transverse waves.

Nakagawa, Y.↗

Thermomechanical phenomena in high speed rubbing

An analytical approach is presented for the modeling of the thermomechanical interactions which occur in high speed sliding situations. These sliding contact problems which are characterized by active and interrelated thermal and mechanical phenomena could be called 'rub energetics' problems. Analytical models were developed to simulate two different rub situations: high energy braking of disk brakes and high speed rubs of gas path seals in turbine engines. The models proved to be particularly useful in predicting the severe temperatures and deformations near hot contact patches on the rubbing surfaces. The size of the hot patches is generally determined by normal load and the properties of the contacting materials. Temperatures at the contact patches can approach the melting point of the materials, especially at high sliding velocities. These high temperatures can lead to large amounts of near-surface deformation and high wear rates. Decreased contact temperatures can result from using materials with increased thermal conductivity and increased heat capacity or choosing mechanical properties (decreased stiffness, yield stress or coefficient of thermal expansion) which give larger hot spot size.

Kennedy, F. E.↗

A power satellite sonic simulator

A simulator is described which generates and transmits a beam of audible sound energy mathematically similar to the solar power satellite (SPS) power beam. The simulator provides a laboratory means for analysis of ground based closed loop SPS phase control and of ionospheric effects on the SPS microwave power beam.

Ott, J. H.↗

Radiation effects studies for the high-resolution spectrograph

The generation and collection of charge carriers created during the passage of energetic protons through a silicon photodiode array are modeled. Pulse height distributions of noise charge collected during exposure of a digicon type diode array to 21 and 75 MeV protons were obtained. The magnitude of charge collected by a diode from each proton event is determined not only by diffusion, but by statistical considerations involving the ionization process itself. Utilizing analytical solutions to the diffusion equation for transport of minority carriers, together with the Vavilov theory of energy loss fluctuations in thin absorbers, simulations of the pulse height spectra which follow the experimental distributions fairly well are presented and an estimate for the minority carrier diffusion length L sub d is provided.

Smith, L. C.↗

Thin film concentrator panel development

The development and testing of a rigid panel concept that utilizes a thin film reflective surface for application to a low-cost point-focusing solar concentrator is discussed. It is shown that a thin film reflective surface is acceptable for use on solar concentrators, including 1500 F applications. Additionally, it is shown that a formed steel sheet substrate is a good choice for concentrator panels. The panel has good optical properties, acceptable forming tolerances, environmentally resistant substrate and stiffeners, and adaptability to low to mass production rates. Computer simulations of the concentrator optics were run using the selected reflector panel design. Experimentally determined values for reflector surface specularity and reflectivity along with dimensional data were used in the analysis. The simulations provided intercept factor and net energy into the aperture as a function of aperture size for different surface errors and pointing errors. Point source and Sun source optical tests were also performed.

Zimmerman, D. K.↗

Atmospheric simulator and calibration system for remote sensing radiometers

A system for calibrating the MAPS (measurement of air pollution from satellites) instruments was developed. The design of the system provides a capability for simulating a broad range of radiant energy source temperatures and a broad range of atmospheric pressures, temperatures, and pollutant concentrations for a single slab atmosphere. The system design and the system operation are described.

Holland, J. A.↗

Modeling of transient disturbances in coronal-streamer configurations

Numerical simulations of the formation and propagation of mass ejection, loop transients in coronal streamers are discussed. The simulations are accomplished with numerical solutions of the single fluid, ideal MHD equations of motion in the meridional plane. The streamer is produced by simulating the relaxation of an initially radial hydrodynamic flow coupled with a dipole magnetic field. The simulated transient then results from an energy release at the base of the streamer. The legs of the loop transient produced remain essentially stationary while the loop expands mainly in the radial direction with velocities of 400 to 750 km s-1. Once the leading edge of the transient has passed out of the lower corona, the initial streamer configuration is restored after 15 to 24 hours. A second energy release 2 hours later than, and with an energy release identical to, the first does not produce a significant coronal disturbance.

Steinolfson, R. S.↗

Simulation study of Type 2 counterstreaming electrons along auroral field lines

The production of counterstreaming electrons associated with parallel fields along auroral field lines is examined through the use of computer simulation. A 2 1/2-dimensional (two spatial and three velocity dimensions) electrostatic particle algorithm and auroral boundary conditions are used to set up a self-consistent V potential structure. The simulation produces signatures of counterstreaming electrons resembling those observed by the Dynamics Explorer 1 satellite. The main signatures are as follows: (1) the phase space contours of the electron distribution function are elongated along the V-parallel axis, and (2) the energy of electrons streaming in the upward direction is comparable to the energy of the accelerated electron beam. The simulation indicates that a portion of the accelerated electron beam is trapped by large amplitude electrostatic waves produced through the two-stream instability. Strong wave-particle interactions then thermalize the trapped electrons to produce suprathermal electrons streaming in the direction opposite to that of the accelerated electron beam. These results suggest a possible mechanism of producing counterstreaming electron fluxes through nonlinear processes of the two-stream instability.

Wagner, J. S.↗

Collisional heating by nonthermal electrons in a tapered magnetic loop

The behavior of nonthermal electrons ejected into a tapered magnetic loop, under the action of both Coulomb collisional and magnetic field gradient forces is studied. An approximate analytic formula for the heating rate as a function of distance along the loop is developed, and found to be in good agreement with exact numerical solutions of the relevant equations. Such a formula is useful as a source term in many situations, such as hydrodynamic simulations of atmospheric response to flare energy input.

Chandrashekar, S.↗

Modeling of wave-coherent pressures in the turbulent boundary layer above water waves

The behavior of air pressure fluctuations induced by progressive water waves generated mechanically in a laboratory tank was simulated by solving a modified Orr-Sommerfeld equation in a transformed Eulerian wave-following frame of reference. Solution is obtained by modeling the mean and wave-coherent turbulent Reynolds stresses, the behavior of which in the turbulent boundary layer above the waves was simulated using a turbulent kinetic energy-dissipation model, properly modified to account for free-surface proximity and favorable pressure gradient effects. The distribution of both the wave-coherent turbulent Reynolds stress and pressure amplitudes and their corresponding phase lags was found to agree reasonably well with available laboratory data.

Papadimitrakis, Yiannis ALEX.↗